GSM-Forum - Lenovo S960 While Flash, Erase Error! Something Went Wrong!

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)

- - Lenovo S960 While Flash, Erase Error! Something Went Wrong! (https://forum.gsmhosting.com/vbb/f296/lenovo-s960-while-flash-erase-error-something-went-wrong-2064569/)

Lenovo S960 While Flash, Erase Error! Something Went Wrong!

Dear Friends,

It's Lenovo S960, Problem Was Slow Working.

Before Flash I Read This Firmware Version As Backup.
MT6589__Lenovo__Lenovo_S960__S960_ROW__4.2.2__S960 _ROW_S129_140411

Then I Tried To Flash With This Firmware Version.
MT6589__Lenovo__Lenovo_S960__S960_ROW__4.4.2__S960 _ROW_S210_140529

Operation : Check / Read Info [ v1.43 ]

Code:

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey
 

Wait for phone...

Phone found! [ 23 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6583

BB_CPU_NME : [MediaTek] MT6583|6589_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with SPRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01

Sending and initialize DA ...

Running DA ver.3.2 on BBID : 0x86

NAND Flash : NOT INSTALLED

eMMC Flash : 4900011530305538A2CA0441B5117188

Initialize Memory ... 

DRAM already initialized by Preloader

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , A00U8

[eMMC] : FLASH_CID : 15010049385530304104CAA2887111B5

[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000

[eMMC] : FLASH_LEN : 0x00000003A3E00000

[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]

DEV RID    : 76D69CAF0C95FC2D15D0E0AFD32EB0FD

INT RAM    : 0x00020000

EXT RAM    : 0x80000000

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!
 

[AP] : Initial info read Ok!
 

Brand     : Lenovo

ProdName  : S960_ROW

ProdModel : Lenovo S960

Device    : S960_ROW

AndroidVer: 4.2.2

MTKxCPU   : MT6589

MTKxPRJ   : S960_ROW_S129_140411
 

SECURITY : 

IMEI_SW [1] : 86232XXXXXXXXXX

BTMAC Addr  : 503CCXXXXXXX

WiFi MAC    : 503CCXXXXXXX
 

MODEM : 

BaseBand  : MT6589_S00_S960_ROW_F_V7
 

EXTRA : 

LCD [0] : nt35595_fhd_dsi_cmd_chimei

LCD [1] : nt35595_fhd_dsi_vdo_lg

LCD Res : 1920#960x1080#540

TOUCH [0] : ft5206_snoopy

TOUCH [1] : #cy8ctma300

TOUCH [2] : GT818B-fpga

CAM [0] : imx135_mipi_raw

CAM [1] : ov5693_mipi_raw

MODEM : mt6589_md1_hspa_skypaband18_snoopy

LOCALE : en_US es_ES zh_CN zh_TW zh_HK ru_RU pt_BR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG  th_TH  pt_PT   nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR iw_IL my_MM km_KH hdpi xhdpi xxhdpi
 

Done!

Elapsed: 00:00:10

Reconnect Power/Cable!

Operation : Read Flash [ v1.43 ]

Code:

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey
 

Wait for phone...

Phone found! [ 23 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6583

BB_CPU_NME : [MediaTek] MT6583|6589_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with SPRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01

Sending and initialize DA ...

Running DA ver.3.2 on BBID : 0x86

NAND Flash : NOT INSTALLED

eMMC Flash : 4900011530305538A2CA0441B5117188

Initialize Memory ... 

DRAM already initialized by Preloader

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , A00U8

[eMMC] : FLASH_CID : 15010049385530304104CAA2887111B5

[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000

[eMMC] : FLASH_LEN : 0x00000003A3E00000

[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]

DEV RID    : 76D69CAF0C95FC2D15D0E0AFD32EB0FD

INT RAM    : 0x00020000

EXT RAM    : 0x80000000

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!
 

Reading Flash Content now ... 
 

Brand     : Lenovo

ProdName  : S960_ROW

ProdModel : Lenovo S960

Device    : S960_ROW

AndroidVer: 4.2.2

MTKxCPU   : MT6589

MTKxPRJ   : S960_ROW_S129_140411
 

[Read Ok] : preloader_snoopy_row.bin

[Read Ok] : MBR

[Read Ok] : EBR1

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : EBR2

[Read Ok] : preload.img

[Read Ok] : system.img

[Make Ok] : cache.img

[Make Ok] : userdata.img
 

[ScatCFG] : MT6589 / V1.0.0 / snoopy_row / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 1815 MiB

Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6589__Lenovo__Lenovo_S960__S960_ROW__4.2.2__S960_ROW_S129_140411\
 

All done!
 

Done!

Elapsed: 00:08:49

Reconnect Power/Cable!

Operation : Flash [ v1.43 ]

Code:

======= Flash

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey
 

Wait for phone...

Phone found! [ 23 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6583

BB_CPU_NME : [MediaTek] MT6583|6589_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with SPRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01

Sending and initialize DA ...

Running DA ver.3.2 on BBID : 0x86

NAND Flash : NOT INSTALLED

eMMC Flash : 4900011530305538A2CA0441B5117188

Initialize Memory ... 

DRAM already initialized by Preloader

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , A00U8

[eMMC] : FLASH_CID : 15010049385530304104CAA2887111B5

[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000

[eMMC] : FLASH_LEN : 0x00000003A3E00000

[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]

DEV RID    : 76D69CAF0C95FC2D15D0E0AFD32EB0FD

INT RAM    : 0x00020000

EXT RAM    : 0x80000000

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!
 

ScatCFG : BaseBand : MT6589 , Project : MTK6589 , Storage : eMMC

Setting : Flash Pre-Erase (Safe) : Enabled

Setting : AFF verify :  Enabled

Setting : HW verify :  Enabled
 

BL : Check HW compatibility

BL : BBID supported by BootLoader!

BL : Check eMMC compatibility

BL : eMMC supported by BootLoader!
 

BL : BatteryLevel : 4176 mV

BL : BatteryLevel Ok
 

BL : Flash Pre-Erase

Total blocks to Erase : 2

Erase : 0x0000000000600000-0x0000000000100000

Erase : 0x0000000002720000-0x00000000FD8D00A8

Erase Error! Something went wrong!
 

Operation Failed

Elapsed: 00:00:14

Reconnect Power/Cable!

=> TOOL DL image Fail!
=> uboot is blocking by dl info

Operation : Fix DL Errors [ v1.43 ]

Code:

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey
 

Wait for phone...

Phone found! [ 23 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6583

BB_CPU_NME : [MediaTek] MT6583|6589_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with SPRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01

Sending and initialize DA ...

Running DA ver.3.2 on BBID : 0x86

NAND Flash : NOT INSTALLED

eMMC Flash : 4900011530305538A2CA0441B5117188

Initialize Memory ... 

DRAM already initialized by Preloader

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , A00U8

[eMMC] : FLASH_CID : 15010049385530304104CAA2887111B5

[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000

[eMMC] : FLASH_LEN : 0x00000003A3E00000

[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]

DEV RID    : 76D69CAF0C95FC2D15D0E0AFD32EB0FD

INT RAM    : 0x00020000

EXT RAM    : 0x80000000

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!
 

DA DLFix Passed!
 

Done!

Elapsed: 00:00:19

Reconnect Power/Cable!

After All It's At Bootloop / Hang At Logo.

Hello.
Send me scatter.txt file from firmware.

My Dear Best Friend,

Here It's scatter.txt File : DOWNLOAD

scatter From Which I Read Before Flash, Firmware Version (S960_ROW_S129_140411).

Got it. Next version will solve that problem and will flash phone.

My Dear Best Friend,

My Problem Solved With This Firmware Version : S960_ROW_S128 target_bin_1401271115 By SPFT.

Operation : Check / Read Info [ v1.43 ]

Code:

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey
 

Wait for phone...

Phone found! [ 23 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6583

BB_CPU_NME : [MediaTek] MT6583|6589_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with SPRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01

Sending and initialize DA ...

Running DA ver.3.2 on BBID : 0x86

NAND Flash : NOT INSTALLED

eMMC Flash : 4900011530305538A2CA0441B5117188

Initialize Memory ... 

DRAM already initialized by Preloader

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , A00U8

[eMMC] : FLASH_CID : 15010049385530304104CAA2887111B5

[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000

[eMMC] : FLASH_LEN : 0x00000003A3E00000

[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]

DEV RID    : 76D69CAF0C95FC2D15D0E0AFD32EB0FD

INT RAM    : 0x00020000

EXT RAM    : 0x80000000

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!
 

[AP] : Initial info read Ok!
 

Brand     : Lenovo

ProdName  : S960_ROW

ProdModel : Lenovo S960

Device    : S960_ROW

AndroidVer: 4.2.2

MTKxCPU   : MT6589

MTKxPRJ   : S960_ROW_S128_140127
 

MODEM : 

BaseBand  : MT6589_S00_S960_ROW_F_V7
 

EXTRA : 

LCD [0] : nt35595_fhd_dsi_cmd_chimei

LCD [1] : nt35595_fhd_dsi_vdo_lg

LCD Res : 1920#960x1080#540

TOUCH [0] : ft5206_snoopy

TOUCH [1] : #cy8ctma300

TOUCH [2] : GT818B-fpga

CAM [0] : imx135_mipi_raw

CAM [1] : ov5693_mipi_raw

MODEM : mt6589_md1_hspa_skypaband18_snoopy

LOCALE : en_US es_ES zh_CN zh_TW zh_HK ru_RU pt_BR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG  th_TH  pt_PT   nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR iw_IL my_MM km_KH hdpi xhdpi xxhdpi
 

Done!

Elapsed: 00:00:09

Reconnect Power/Cable!

After Flash Repair Security By CM2. It's Show Error In Log But Actually IMEI Repaired.

Operation : Repair Security [ v1.43 ]

Code:

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey
 

Wait for phone...

Phone found! [ 23 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6583

BB_CPU_NME : [MediaTek] MT6583|6589_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with SPRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01

Sending and initialize DA ...

Running DA ver.3.2 on BBID : 0x86

NAND Flash : NOT INSTALLED

eMMC Flash : 4900011530305538A2CA0441B5117188

Initialize Memory ... 

DRAM already initialized by Preloader

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , A00U8

[eMMC] : FLASH_CID : 15010049385530304104CAA2887111B5

[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000

[eMMC] : FLASH_LEN : 0x00000003A3E00000

[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]

DEV RID    : 76D69CAF0C95FC2D15D0E0AFD32EB0FD

INT RAM    : 0x00020000

EXT RAM    : 0x80000000

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!
 
 

Set IMEI [00] : 86232XXXXXXXXXX

Prepare finished. Security check required!
 

Wait for phone...

Phone found! [ 23 ]

Sync...

Device boot not done

Check Drivers

Try again 
 

Error while post-checking procedure! Check drivers and battery charge!

In some cases - need reconnect mobile (just reinsert cable) on this step

Reconnect Power/Cable!

Operation : Fix DL Errors [ v1.43 ]

Code:

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey
 

Wait for phone...

Phone found! [ 23 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6583

BB_CPU_NME : [MediaTek] MT6583|6589_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with SPRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01

Sending and initialize DA ...

Running DA ver.3.2 on BBID : 0x86

NAND Flash : NOT INSTALLED

eMMC Flash : 4900011530305538A2CA0441B5117188

Initialize Memory ... 

DRAM already initialized by Preloader

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , A00U8

[eMMC] : FLASH_CID : 15010049385530304104CAA2887111B5

[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000

[eMMC] : FLASH_LEN : 0x00000003A3E00000

[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]

DEV RID    : 76D69CAF0C95FC2D15D0E0AFD32EB0FD

INT RAM    : 0x00020000

EXT RAM    : 0x80000000

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!
 

DA DLFix Passed!
 

Done!

Elapsed: 00:00:09

Reconnect Power/Cable!

Both Firmware Version Which Was Read By CM2, Didn't Work For This Cellphone.

And This Factory Firmware S960_ROW_S128 target_bin_1401271115 Also Didn't Flash With CM2.

Is There Something Wrong With My Firmware ?.

yes i have file by cm2 Read and flash tested file
MT6589__Lenovo__Lenovo_S960__S960_ROW__4.4.2__S960 _ROW_S211_140702
i hope solve your problm