GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)
-   -   Mobicel Switch1 identify and read flash problem. (https://forum.gsmhosting.com/vbb/f296/mobicel-switch1-identify-read-flash-problem-2720942/)

sajjad akram 11-05-2019 12:52

Mobicel Switch1 identify and read flash problem.
 
Mobicel Switch1 sc7731e 8.1.0 giving error when identify device (Stream read error).
Need to read firmware please fix this problem.

here is link for screen short.

https://mega.nz/#!Rvx3yTYb!1wo-hn1u_...QlR2Bt_zseN3D0


Card found : 7A5A6AEC , v0138
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.02

Load IDBase v10107 Ok!


VER : BP_R1.0.0
LEN : 002AA9D3
CPU : Senwa_S40E
VER : Mobicel_SWITCH1-Loader

Operation : Identify [ v2.02 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : Mobicel_SWITCH1-Loader
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : OPM2.171019.012
Display ID : OPM2.171019.012 release-keys
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-07-05
Build Time : 1533897166
Product Info : k120
Product Model : SWITCH1
Product Brand : Mobicel
Product Name : SWITCH1
Product Device : SWITCH1
Product Manfct : Mobicel
Product Board : k120
Board Platform : sp7731e

-=P.F.U=- 04-08-2021 14:56

Mobicel Switch1 Stream Read Error exist here the same problem
 
:confused:


1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_512MB_RS_LOW
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : OPM2.171019.012
Display ID : OPM2.171019.012 release-keys
Ver. Incmt : 1533890843
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-07-05
Build Time : 10.08.2018
Product Info : k120
Product Model : SWITCH1
Product Brand : Mobicel
Product Name : SWITCH1
Product Device : SWITCH1
Product Manfct : Mobicel
Product Board : k120
Board Platform : sp7731e


https://i.ibb.co/XXYMScT/mobicel-swi...read-error.png

InfinityHelp 04-11-2021 11:15

You are using CM2SP2 v2.09
Try with CM2SP2 v2.11 https://www.infinity-box.com/news/?r=4092

What is the result?


All times are GMT +1. The time now is 21:16.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -

Page generated in 0.12470 seconds with 6 queries

SEO by vBSEO