MT2v203 O_o - Page 2 - GSM-Forum

haseebkakar · 12-31-2018, 06:54

Tnx team fast time open my cm2mt2 ...
Gerard work.......
All software working
cm2 spd cm2qm2 all working..only cm2mt2 not opne..

.
Great Update Team ....

Southsider2009 · 12-31-2018, 07:19

In this update, does it mean that we can read and write firmware from phones that need signed firmware before it can accept flash?

choksi · 12-31-2018, 07:25

please help, 2.03 is not opening, 2.2 was working fine, there is not fault.bin file in cm2mt2 location. help as soon as possible

chauhanyash70 · 12-31-2018, 07:27

Quote:

Originally Posted by choksi

please help, 2.03 is not opening, 2.2 was working fine, there is not fault.bin file in cm2mt2 location. help as soon as possible

I can help you ...pm me

Sent from my SM-A750F using Tapatalk

Southsider2009 · 12-31-2018, 07:44

Quote:

Originally Posted by choksi

please help, 2.03 is not opening, 2.2 was working fine, there is not fault.bin file in cm2mt2 location. help as soon as possible

Maybe you did not copy and paste it well. Or some files wasn't replaced during copying. Close exe or kill exe from taskmanager, copy all files from extracted folder and paste directly to installation folder of CM2MT2.

Make sure you allow file replacement when window ask

gracy_elec · 12-31-2018, 07:51

WOW WINTER SURPRISE UPDATE AWESOME

THANKS JayDi SIR
THANKS INFINITY-BOX TEAM

mcclinic · 12-31-2018, 07:56

Quote:

Originally Posted by choksi

please help, 2.03 is not opening, 2.2 was working fine, there is not fault.bin file in cm2mt2 location. help as soon as possible

Follow Mr. JaYDi's Link Untill Support site File correction.

gracy_elec · 12-31-2018, 07:58

SUCCESSFULLY READ NVRAM BAG,BRUSH HANG ON LOGO(CELKON CLIQ AND:6.0 MT6737M)USB

SUCCESS REPORT - [Click to open]

THANKS INFINITY-BOX TEAM

alimobile279 · 12-31-2018, 08:03

MT8172 support activated
MT8173 support activated
MT8176 support activated
MT2601 support activated
nice update.........................

kashu345 · 12-31-2018, 08:12

MT2v203 not running plz help

=== DongleManager [Infinity] v1.72 [12/31/2018 12:12:47] ===
Searching...
Card-Reader: Generic EMV Smartcard Reader
Box/Dongle found: Infinity-Box/Dongle
Serial No (S/N): D5
Firmware version: 0137.02
- 00: Infinity-Box/Dongle v.0137
- 07: #7

chauhanyash70 · 12-31-2018, 08:13

Quote:

Originally Posted by kashu345

MT2v203 not running plz help

Just download the zip ..copy into MT2 folder and extract it and select replace all

Sent from my SM-A750F using Tapatalk

mcclinic · 12-31-2018, 08:30

Huawei CUN-U29 Frp Reset Done By MT2.03
============================

kashu345 · 12-31-2018, 08:52

Quote:

Originally Posted by chauhanyash70

Just download the zip ..copy into MT2 folder and extract it and select replace all

Sent from my SM-A750F using Tapatalk

there is no zip on support area just exe 2.03

JayDi · 12-31-2018, 09:35

Quote:

Originally Posted by Southsider2009

In this update, does it mean that we can read and write firmware from phones that need signed firmware before it can accept flash?

Quote:

Originally Posted by alkim

and also you are moroon

your burning back hole so funny looks, really.

chauhanyash70 · 12-31-2018, 09:37

Quote:

Originally Posted by kashu345

there is no zip on support area just exe 2.03

https://mega.nz/#F!b3hWgAgT!PaX2rvYqM1MhshABAUn6kw

12-31-2018, 07:58	#23 (permalink)
gracy_elec No Life Poster Join Date: Feb 2005 Location: GSM WORLD Posts: 2,079 Member: 118520 Status: Offline Thanks Meter: 3,551	CELKON CLIQ AND:6.0 MT6737M READ NVRAM BAB,BRUSH HANG ON LOGO Done SUCCESSFULLY READ NVRAM BAG,BRUSH HANG ON LOGO(CELKON CLIQ AND:6.0 MT6737M)USB SUCCESS REPORT - [Click to open] Operation : Identify [ v2.03 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM5) MODE : PRELOADER PORT PORT : 5 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 TYPE : LEGACY MTK BROM : SecLevel : 0x00000000 BROM : SecMode : PLAIN [+PRL] BROM : PRELOADER PORT MODE : 0_base : BASE_v1844 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6735 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! NAND : DEVICE NOT FOUND eMMC : OK eMMC : 90014A484147326505072995AC481295 DAInf: 4 : 2 : 155 DA : DRAM ready! DA : BOOT to 2nd DA ... DA : Receiving HW info EMMC: 90014A48414732655072995AC48C295 EMMC: VEN : HYNIX \| OEM : 4A01 \| DEV : HAG2e EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0x3AB800000 [ 14.68 GB ] SRAM: 0x00020000 [ 128.00 KB ] DRAM: 0x80000000 [ 2.00 GB ] CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : C92E3ABFB0F477CDD07FF4BC15A65C82 STATUS : BLANK FLASH BSTYLE : EMMC FLASH BOOT DA : USB : HIGH-SPEED Boot done! Patch Level : MRA58K Display ID : Celkon_CliQ_V015_20171108 Ver. CodeName : REL Ver. Release : 6.0 Sec. Patch : 2017-09-05 Build Time : 1510109657 Product Model : CliQ Product Brand : Celkon Product Name : CliQ Product Device : CliQ Product Board : CliQ Product Manfct : Celkon Board Platform : mt6737m Product Info : CliQ USERDATA : PLAIN ( NOT encrypted ) IMEI[0] : 911XXXXXXXX461 IMEI[1] : 911XXXXXXXX479 IMEI[2] : 35XXXXXXXXX001 NVRAM check : Passed! Done! Elapsed: 00:00:15 Operation : Read Security [ v2.03 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM5) MODE : PRELOADER PORT PORT : 5 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 TYPE : LEGACY MTK BROM : SecLevel : 0x00000000 BROM : SecMode : PLAIN [+PRL] BROM : PRELOADER PORT MODE : 0_base : BASE_v1844 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6735 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! NAND : DEVICE NOT FOUND eMMC : OK eMMC : 90014A484147326505072995AC481295 DAInf: 4 : 2 : 155 DA : DRAM ready! DA : BOOT to 2nd DA ... DA : Receiving HW info EMMC: 90014A48414732655072995AC48C295 EMMC: VEN : HYNIX \| OEM : 4A01 \| DEV : HAG2e EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0x3AB800000 [ 14.68 GB ] SRAM: 0x00020000 [ 128.00 KB ] DRAM: 0x80000000 [ 2.00 GB ] CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : C92E3ABFB0F477CDD07FF4BC15A65C82 STATUS : BLANK FLASH BSTYLE : EMMC FLASH BOOT DA : USB : HIGH-SPEED Boot done! SEC Data : IMEI[0] : 911XXXXXXX6461 IMEI[1] : 911XXXXXXX6479 IMEI[2] : 353XXXXXXXX001 NVRAM check : Passed! NVM saved as : MT6735__eMMC__9115XXXXXXXX461.mt_sec NVM saved to : C:\InfinityBox\CM2MT2\Backup\ Done! Elapsed: 00:00:20 Reconnect Power/Cable! Operation : Reset Settings/Format FS [ v2.03 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM5) MODE : PRELOADER PORT PORT : 5 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 TYPE : LEGACY MTK BROM : SecLevel : 0x00000000 BROM : SecMode : PLAIN [+PRL] BROM : PRELOADER PORT MODE : 0_base : BASE_v1844 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6735 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! NAND : DEVICE NOT FOUND eMMC : OK eMMC : 90014A484147326505072995AC481295 DAInf: 4 : 2 : 155 DA : DRAM ready! DA : BOOT to 2nd DA ... DA : Receiving HW info EMMC: 90014A48414732655072995AC48C295 EMMC: VEN : HYNIX \| OEM : 4A01 \| DEV : HAG2e EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0x3AB800000 [ 14.68 GB ] SRAM: 0x00020000 [ 128.00 KB ] DRAM: 0x80000000 [ 2.00 GB ] CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : C92E3ABFB0F477CDD07FF4BC15A65C82 STATUS : BLANK FLASH BSTYLE : EMMC FLASH BOOT DA : USB : HIGH-SPEED Boot done! Format Ok : USERDATA Format Ok : CACHE Format Ok : RESET PROTECTION Format Ok : USERDATA Done! Elapsed: 00:00:42 Reconnect Power/Cable! THANKS INFINITY-BOX TEAM

12-31-2018, 08:12	#25 (permalink)
kashu345 Freak Poster Join Date: Feb 2013 Posts: 180 Member: 1877732 Status: Offline Thanks Meter: 119	MT2v203 MT2v203 not running plz help === DongleManager [Infinity] v1.72 [12/31/2018 12:12:47] === Searching... Card-Reader: Generic EMV Smartcard Reader Box/Dongle found: Infinity-Box/Dongle Serial No (S/N): D5 Firmware version: 0137.02 - 00: Infinity-Box/Dongle v.0137 - 07: #7

12-31-2018, 06:54	#16 (permalink)
haseebkakar No Life Poster Join Date: Jul 2016 Location: Pakistan Posts: 887 Member: 2603633 Status: Offline Sonork: family Thanks Meter: 214	Tnx team fast time open my cm2mt2 ... Gerard work....... All software working cm2 spd cm2qm2 all working..only cm2mt2 not opne.. . Great Update Team ....

12-31-2018, 07:19	#17 (permalink)
Southsider2009 No Life Poster Join Date: Dec 2015 Location: Somewhere on the Internet Posts: 1,162 Member: 2500215 Status: Offline Thanks Meter: 417	In this update, does it mean that we can read and write firmware from phones that need signed firmware before it can accept flash?

12-31-2018, 07:25	#18 (permalink)
choksi Freak Poster Join Date: Nov 2017 Location: midrand Posts: 237 Member: 2783412 Status: Offline Sonork: 1680285 Thanks Meter: 226	please help, 2.03 is not opening, 2.2 was working fine, there is not fault.bin file in cm2mt2 location. help as soon as possible

12-31-2018, 07:51	#21 (permalink)
gracy_elec No Life Poster Join Date: Feb 2005 Location: GSM WORLD Posts: 2,079 Member: 118520 Status: Offline Thanks Meter: 3,551	WOW WINTER SURPRISE UPDATE AWESOME THANKS JayDi SIR THANKS INFINITY-BOX TEAM

12-31-2018, 08:03	#24 (permalink)
alimobile279 No Life Poster Join Date: Mar 2011 Location: Faisalabad Posts: 1,482 Member: 1527968 Status: Offline Sonork: 100.1651182 Thanks Meter: 483	MT8172 support activated MT8173 support activated MT8176 support activated MT2601 support activated nice update.........................

12-31-2018, 08:30	#27 (permalink)
mcclinic No Life Poster Join Date: Sep 2007 Location: Earth Posts: 902 Member: 593876 Status: Offline Thanks Meter: 302	Huawei CUN-U29 Frp Reset Done By MT2.03 ============================