GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box
Reload this Page MTK : UltraFlashing : Ignore rules
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source


Reply
Page 1 of 2 1 2
 
LinkBack Thread Tools Display Modes
Old 07-20-2020, 08:20   #1 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Location: Where you live
Posts: 18,542
Member: 462970
Status: Offline
Thanks Meter: 20,352
MTK : UltraFlashing : Ignore rules

Inspired by users needs, android 10, and other breed, which brings us vendors.
It is not a panacea, but ... More follow

Code:
Operation : Write Flash [ v2.14 ]

Repartition   : Enabled
Flash Verify  : Enabled
Reg.Pre-Erase : Enabled
Verify HW/SW  : Enabled
SData Backup  : Disabled
Safe UserData : Disabled
Flash Format  : Disabled

Files :22
[FL] : Set : preloader_k65v1_64_bsp.bin
[FL] : Set : recovery.img
[FL] : Set : survival.img
[FL] : Set : cust.img
[FL] : Set : efuse.img
[FL] : Set : md1rom.img
[FL] : Set : spmfw.img
[FL] : Set : tinysys-scp.bin
[FL] : Set : tinysys-scp.bin
[FL] : Set : tinysys-sspm.bin
[FL] : Set : tinysys-sspm.bin
[FL] : Set : lk.bin
[FL] : Set : lk.bin
[FL] : Set : boot.img
[FL] : Set : logo.bin
[FL] : Set : dtbo.img
[FL] : Set : tz.img
[FL] : Set : tz.img
[FL] : Set : system.img
[FL] : Set : vbmeta.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0x108E3F3D0 [ 4,14 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM17)
MODE : PRELOADER PORT
PORT : 17
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : BROM|BL  : 0xFF|0x03
BROM : PRELOADER PORT
MODE : Vivo : SEC_MT6765 | Manual : Disabled
BROM : SOCID : E79DAxxxxxxxxxxxB7A5A0D13321
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0x30000000 [ 768,00 MB ]

        EMMC: 150100444836444D420540xxxxxxxxx
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : DH6DMB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0xE8F800000 [ 58,24 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : E7BxxxxxxxxxxxxxxxxxxxxxxD3C2

DA : USB : HIGH-SPEED

Boot done!

[FL] : HW verification passed!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : Pre-Erase 
Erase : 0x0000000000000000 : 0x0000000005688000
Erase : 0x0000000007688000 : 0x0000000004000000
Erase : 0x000000000C088000 : 0x0000000004000000
Erase : 0x0000000010A88000 : 0x0000000006000000
Erase : 0x0000000018000000 : 0x0000000000800000
Erase : 0x000000001B800000 : 0x0000000000200000
Erase : 0x000000001BD00000 : 0x0000000008980000
Erase : 0x0000000028680000 : 0x0000000006980000
Erase : 0x000000008F000000 : 0x0000000DFCCFBE00

[FL] : RePartition 
[FL] : RePartition Ok!


[FL] : Flashing now ... 

Write : PRELOADER
Update bootloader backup copy ... 
Update bootloader backup copy Ok!
Write : RECOVERY
FAIL : SEC : IMGHDR TYPE MISMATCH
Write : SURVIVAL
FAIL : SEC : IMGHDR TYPE MISMATCH
Write : CUST
Write : EFUSE
Write : MD1IMG
FAIL : SEC : IMG TYPE MISMATCH
Write : SPMFW
Write : SCP1
Write : SCP2
Write : SSPM_1
Write : SSPM_2
Write : LK
Write : LK2
Write : BOOT
FAIL : SEC : IMGHDR TYPE MISMATCH
Write : LOGO
Write : DTBO
FAIL : SEC : IMG TYPE MISMATCH
Write : TEE1
Write : TEE2
Write : SYSTEM
Write : VBMETA
Write : CACHE
Write : USERDATA

[FL]  : UltraFlashing
[FL]  : Total Failed to flash : 5
[FL]  : Rebuild files Ok!

Write : RECOVERY
Write : SURVIVAL
Write : MD1IMG
Write : BOOT
Write : DTBO

[FL]  : UltraFlashing Ok!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : RePartition 
[FL] : RePartition Ok!

[FL] : Flashing finished!

Done!
Elapsed: 00:02:55

Reconnect Power/Cable!
Code:
Operation : Identify [ v2.14 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM17)
MODE : PRELOADER PORT
PORT : 17
Waiting BOOT ack ...
PRELOADER : ACK confirm FAIL!
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : BROM|BL  : 0xFF|0x03
BROM : PRELOADER PORT
MODE : Vivo : SEC_MT6765 | Manual : Disabled
BROM : SOCID : E79xxxxxxxxxxxxxxxxxxxxx5A0D13321
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0x30000000 [ 768,00 MB ]

        EMMC: 150100444836444D420540E99055B53B
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : DH6DMB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0xE8F800000 [ 58,24 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : E7Bxxxxxxxxxxxxxxxxxxxxx3C2

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : PPR1.180610.011
Display ID     : PPR1.180610.011 release-keys
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2019-03-05
Build Time     : 1555870881
Product Model  : vivo 1902
Product Brand  : vivo
Product Name   : PD1901F_EX
Product Device : PD1901F_EX
Product Manfct : vivo
Product Info   : k65v1_64_bsp
Product Board  : k65v1_64_bsp
Board Platform : mt6765

USERDATA : FILESYSTEM : EXT4  with FDE ( Full Disk Encryption **)

NVRAM check : Passed!
NVRAM : SEC NORMAL  [ No extra security ]

Backup sensetive data [ 8 ]
Backup path : Backup\MT6765__E7xxxxxxxxxxxxxx3C2\
Backup done!


STORAGE : LifeStatus : Verify NOT supported by DA/HW!

Done!
Elapsed: 00:00:16
  Reply With Quote
The Following 34 Users Say Thank You to JayDi For This Useful Post:
Show/Hide list of the thanked
Old 07-20-2020, 08:26   #2 (permalink)
No Life Poster
 
malka4u's Avatar
 
Join Date: Aug 2011
Location: bagmati pradesh
Posts: 3,296
Member: 1626780
Status: Offline
Thanks Meter: 1,275
Wow.. it is great news . Thanks team
  Reply With Quote
The Following User Says Thank You to malka4u For This Useful Post:
Old 07-20-2020, 08:33   #3 (permalink)
No Life Poster
 
sahassan82's Avatar
 
Join Date: Feb 2005
Location: Pakistan
Posts: 977
Member: 116955
Status: Offline
Sonork: 100.1604268
Thanks Meter: 992
Great i need it thanks team
waiting for update
  Reply With Quote
Old 07-20-2020, 09:02   #4 (permalink)
No Life Poster
 
rebainoor's Avatar
 
Join Date: Feb 2006
Location: In my LAB
Posts: 3,163
Member: 231728
Status: Offline
Thanks Meter: 2,103
Donate money to this user
MagicFlashing
Without all_in_one sig
  Reply With Quote
Old 07-20-2020, 15:17   #5 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Location: Where you live
Posts: 18,542
Member: 462970
Status: Offline
Thanks Meter: 20,352
Quote:
Originally Posted by rebainoor View Post
MagicFlashing
Without all_in_one sig
That method allow ignore signatures at all on most DA/Efuse config.

Only for flashing, for sure. That will affect devices, which agents and other stuff configured not correct, or used generic DA instead vendor ones.

It is just a part of following series "breaking rules" updates.
  Reply With Quote
The Following 11 Users Say Thank You to JayDi For This Useful Post:
Show/Hide list of the thanked
Old 07-20-2020, 15:33   #6 (permalink)
No Life Poster
 
rebainoor's Avatar
 
Join Date: Feb 2006
Location: In my LAB
Posts: 3,163
Member: 231728
Status: Offline
Thanks Meter: 2,103
Donate money to this user
Quote:
Originally Posted by JayDi View Post
That method allow ignore signatures at all on most DA/Efuse config.

Only for flashing, for sure. That will affect devices, which agents and other stuff configured not correct, or used generic DA instead vendor ones.

It is just a part of following series "breaking rules" updates.
good
i think will work with memory tool too
  Reply With Quote
Old 07-23-2020, 10:10   #7 (permalink)
Product Supporter
 
Join Date: May 2005
Location: uae
Posts: 29,245
Member: 148515
Status: Offline
Thanks Meter: 19,534
Quote:
Originally Posted by sahassan82 View Post
Great i need it thanks team
waiting for update
It should be officially released in nearest time. Some kind of tests are in progress now.
  Reply With Quote
The Following 5 Users Say Thank You to InfinityHelp For This Useful Post:
Show/Hide list of the thanked
Old 07-27-2020, 11:57   #8 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Location: Where you live
Posts: 18,542
Member: 462970
Status: Offline
Thanks Meter: 20,352
Infinix x655c Test by sahassan82

Code:
Operation : Write Flash [ v2.14 ]

Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Disabled
Safe UserData : Disabled
Flash Format : Disabled

Files :23
[FL] : Set : preloader_x655c_h6211.bin
[FL] : Set : tkv.img
[FL] : Set : recovery.img
[FL] : Set : md1img-verified.img
[FL] : Set : spmfw-verified.img
[FL] : Set : scp-verified.img
[FL] : Set : scp-verified.img
[FL] : Set : sspm-verified.img
[FL] : Set : sspm-verified.img
[FL] : Set : lk-verified.img
[FL] : Set : lk-verified.img
[FL] : Set : boot.img
[FL] : Set : logo-verified.bin
[FL] : Set : dtbo-verified.img
[FL] : Set : tee-verified.img
[FL] : Set : tee-verified.img
[FL] : Set : vbmeta.img
[FL] : Set : vbmeta_system.img
[FL] : Set : vbmeta_vendor.img
[FL] : Set : super.img
[FL] : Set : cache.img
[FL] : Set : tranfs.img
[FL] : Set : userdata.img

[FL] : Total size : 0xF77CC34C [ 3.87 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
MODE : INFINIX : SEC_NEW | Manual : Disabled
BROM : SOCID : B8xxxxxxxxxxxxxxxxxxxxxxB4
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00080000 [ 512.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]

EMMC: 13014E53304A394B3910xxxxxxxxxxxx
EMMC: VEN : MICRON | OEM : 4E01 | DEV : S0J9K9
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x1D1F000000 [ 116.48 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 38xxxxxxxxxxxxxxxxxxxxxxxxxxx3C

DA : USB : HIGH-SPEED

Boot done!

[FL] : HW verification passed!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : Pre-Erase
Erase : 0x0000000000000000 : 0x0000000000108000
Erase : 0x0000000000408000 : 0x0000000004C1A000
Erase : 0x0000000007022000 : 0x00000000047DE000
Erase : 0x000000000F800000 : 0x000000000BB00000
Erase : 0x000000001F300000 : 0x00000001F5D00000

[FL] : RePartition
[FL] : RePartition Ok!


[FL] : Flashing now ...

Write : PRELOADER
Update bootloader backup copy ...
Update bootloader backup copy Ok!
Write : TKV
Write : RECOVERY
Write : MD1IMG
Write : SPMFW
Write : SCP1
Write : SCP2
Write : SSPM_1
Write : SSPM_2
Write : LK
Write : LK2
Write : BOOT
Write : LOGO
Write : DTBO
Write : TEE1
Write : TEE2
Write : VBMETA
Write : VBMETA_SYSTEM
FAIL : SEC : IMG TYPE MISMATCH
Write : VBMETA_VENDOR
FAIL : SEC : IMG TYPE MISMATCH
Write : SUPER
FAIL : SEC : IMG TOO LARGE
Write : CACHE
Write : TRANFS
Write : USERDATA
 
Ultra : Ok!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : RePartition
[FL] : RePartition Ok!

[FL] : Flashing finished!
Last edited by JayDi; 07-27-2020 at 12:03.
  Reply With Quote
The Following 8 Users Say Thank You to JayDi For This Useful Post:
Show/Hide list of the thanked
Old 07-27-2020, 12:02   #9 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Location: Where you live
Posts: 18,542
Member: 462970
Status: Offline
Thanks Meter: 20,352
Board Software flashing to Huawei JNL22
Code:
Operation : Write Flash [ v2.14 ]

Repartition   : Enabled
Flash Verify  : Enabled
Reg.Pre-Erase : Disabled
Verify HW/SW  : Enabled
SData Backup  : Disabled
Safe UserData : Disabled
Flash Format  : Disabled

Files :21
[FL] : Set : preloader_huawei6750_66_n.bin
[FL] : Set : recovery.img
[FL] : Set : erecovery.img
[FL] : Set : patch.img
[FL] : Set : drvinfo.img
[FL] : Set : md1rom.img
[FL] : Set : md1dsp.img
[FL] : Set : md1arm7.img
[FL] : Set : lk.bin
[FL] : Set : lk.bin
[FL] : Set : boot.img
[FL] : Set : logo.bin
[FL] : Set : tz.img
[FL] : Set : tz.img
[FL] : Set : secro.img
[FL] : Set : system.img
[FL] : Set : version.img
[FL] : Set : cust.img
[FL] : Set : product.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0xC1EF9E08 [ 3,03 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode  : SBC
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2012 | Manual : Disabled
BROM : Change Configuration settings for target
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : INFINITY
     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
     EMI : CNT : 0008
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00038000 [ 224,00 KB ]
        DRAM: 0xC0000000 [ 3,00 GB ]

        EMMC: 90014A484247346132D40A5xxxxxxxxxx
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0x747C00000 [ 29,12 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : D2xxxxxxxxxxxxxxxxxxxxxxxx76

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3

Boot done!

[FL] : HW verification passed!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : RePartition 
[FL] : RePartition Ok!


[FL] : Flashing now ... 

Write : PRELOADER
Update bootloader backup copy ... 
Update bootloader backup copy Ok!
Write : RECOVERY
Write : ERECOVERY
Write : PATCH
FAIL : SEC : IMG TYPE MISMATCH
Write : DRVINFO
FAIL : SEC : IMG TYPE MISMATCH
Write : MD1IMG
Write : MD1DSP
Write : MD1ARM7
Write : LK
Write : LK2
Write : BOOT
Write : LOGO
Write : TEE1
Write : TEE2
Write : SECRO
Write : SYSTEM
Write : VERSION
FAIL : SEC : IMG TYPE MISMATCH
Write : CUST
FAIL : SEC : IMG TOO LARGE
Write : PRODUCT
FAIL : SEC : IMG TYPE MISMATCH
Write : CACHE
Write : USERDATA

Ultra : Ok!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : RePartition 
[FL] : RePartition Ok!

[FL] : Flashing finished!

Done!
Elapsed: 00:03:16
  Reply With Quote
The Following 19 Users Say Thank You to JayDi For This Useful Post:
Show/Hide list of the thanked
Old 07-27-2020, 16:45   #10 (permalink)
Product Supporter
 
Join Date: May 2005
Location: uae
Posts: 29,245
Member: 148515
Status: Offline
Thanks Meter: 19,534
Download links are here - https://forum.gsmhosting.com/vbb/f29...vated-2876365/
  Reply With Quote
The Following User Says Thank You to InfinityHelp For This Useful Post:
Old 01-06-2021, 13:41   #11 (permalink)
okb
Freak Poster
 
Join Date: Mar 2017
Location: Songea-Tanzania
Posts: 155
Member: 2697682
Status: Offline
Thanks Meter: 49
PTFN : MediaTek PreLoader USB VCOM (Android) (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
MODE : TECNO : BASE_SECURE | Manual : Enabled
BROM : SOCID : 3ECFDF30AC070D2F1694D6EDDEBFF0F3E62D5495115D87D9BA 97594537484291
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 90014A68423861503E03C2E95C613793
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : hB8aP>
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : C90F943074B90D86C00F79BE276917FA

DA : USB : HIGH-SPEED

Boot done!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : Pre-Erase
Erase : 0x0000000000008000 : 0x0000000000100000
Erase : 0x0000000000408000 : 0x0000000004C1A000
Erase : 0x0000000007022000 : 0x00000000047DE000
Erase : 0x000000000F800000 : 0x000000000BB00000
Erase : 0x000000001F300000 : 0x00000001A1500000


[FL] : Flashing now ...

Write : TKV
Write : RECOVERY
Write : MD1IMG
Write : SPMFW
Write : SCP1
Write : SCP2
Write : SSPM_1
Write : SSPM_2
Write : LK
Write : LK2
Write : BOOT
Write : LOGO
Write : DTBO
Write : TEE1
Write : TEE2
Write : VBMETA
Write : VBMETA_SYSTEM
FAIL : SEC : IMG TYPE MISMATCH
ERR : 0xC002002A
ERR : SEC : IMG TYPE MISMATCH
ERR : 0x00001000|0x00001000

Error : Flashing failed!
>>> Seems as something wrong with device! Check battery charge and device state!

x680
  Reply With Quote
Old 01-07-2021, 06:03   #12 (permalink)
okb
Freak Poster
 
Join Date: Mar 2017
Location: Songea-Tanzania
Posts: 155
Member: 2697682
Status: Offline
Thanks Meter: 49
Please help
Quote:
Originally Posted by okb View Post
PTFN : MediaTek PreLoader USB VCOM (Android) (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
MODE : TECNO : BASE_SECURE | Manual : Enabled
BROM : SOCID : 3ECFDF30AC070D2F1694D6EDDEBFF0F3E62D5495115D87D9BA 97594537484291
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 90014A68423861503E03C2E95C613793
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : hB8aP>
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : C90F943074B90D86C00F79BE276917FA

DA : USB : HIGH-SPEED

Boot done!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : Pre-Erase
Erase : 0x0000000000008000 : 0x0000000000100000
Erase : 0x0000000000408000 : 0x0000000004C1A000
Erase : 0x0000000007022000 : 0x00000000047DE000
Erase : 0x000000000F800000 : 0x000000000BB00000
Erase : 0x000000001F300000 : 0x00000001A1500000


[FL] : Flashing now ...

Write : TKV
Write : RECOVERY
Write : MD1IMG
Write : SPMFW
Write : SCP1
Write : SCP2
Write : SSPM_1
Write : SSPM_2
Write : LK
Write : LK2
Write : BOOT
Write : LOGO
Write : DTBO
Write : TEE1
Write : TEE2
Write : VBMETA
Write : VBMETA_SYSTEM
FAIL : SEC : IMG TYPE MISMATCH
ERR : 0xC002002A
ERR : SEC : IMG TYPE MISMATCH
ERR : 0x00001000|0x00001000

Error : Flashing failed!
>>> Seems as something wrong with device! Check battery charge and device state!

x680



I Posted this since yesterday but no body reply
  Reply With Quote
Old 01-07-2021, 14:12   #13 (permalink)
No Life Poster
 
Join Date: Oct 2011
Location: Nigeria
Posts: 6,593
Member: 1677653
Status: Offline
Thanks Meter: 2,769
Quote:
Originally Posted by okb View Post
I Posted this since yesterday but no body reply
No Device brand or model mentioned. Btw only flashing log without user explanation not enough..
  Reply With Quote
The Following User Says Thank You to Yusuf Lawal For This Useful Post:
Old 01-08-2021, 12:47   #14 (permalink)
No Life Poster
 
jrbravo's Avatar
 
Join Date: Mar 2016
Location: IN THE KERNEL
Posts: 612
Member: 2545468
Status: Offline
Thanks Meter: 234
Donate money to this user
Post Help Please Lord !!
Quote:
Originally Posted by JayDi View Post
Board Software flashing to Huawei JNL22
Code:
Operation : Write Flash [ v2.14 ]

Repartition   : Enabled
Flash Verify  : Enabled
Reg.Pre-Erase : Disabled
Verify HW/SW  : Enabled
SData Backup  : Disabled
Safe UserData : Disabled
Flash Format  : Disabled

Files :21
[FL] : Set : preloader_huawei6750_66_n.bin
[FL] : Set : recovery.img
[FL] : Set : erecovery.img
[FL] : Set : patch.img
[FL] : Set : drvinfo.img
[FL] : Set : md1rom.img
[FL] : Set : md1dsp.img
[FL] : Set : md1arm7.img
[FL] : Set : lk.bin
[FL] : Set : lk.bin
[FL] : Set : boot.img
[FL] : Set : logo.bin
[FL] : Set : tz.img
[FL] : Set : tz.img
[FL] : Set : secro.img
[FL] : Set : system.img
[FL] : Set : version.img
[FL] : Set : cust.img
[FL] : Set : product.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0xC1EF9E08 [ 3,03 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode  : SBC
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2012 | Manual : Disabled
BROM : Change Configuration settings for target
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : INFINITY
     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
     EMI : CNT : 0008
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00038000 [ 224,00 KB ]
        DRAM: 0xC0000000 [ 3,00 GB ]

        EMMC: 90014A484247346132D40A5xxxxxxxxxx
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0x747C00000 [ 29,12 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : D2xxxxxxxxxxxxxxxxxxxxxxxx76

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3

Boot done!

[FL] : HW verification passed!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : RePartition 
[FL] : RePartition Ok!


[FL] : Flashing now ... 

Write : PRELOADER
Update bootloader backup copy ... 
Update bootloader backup copy Ok!
Write : RECOVERY
Write : ERECOVERY
Write : PATCH
FAIL : SEC : IMG TYPE MISMATCH
Write : DRVINFO
FAIL : SEC : IMG TYPE MISMATCH
Write : MD1IMG
Write : MD1DSP
Write : MD1ARM7
Write : LK
Write : LK2
Write : BOOT
Write : LOGO
Write : TEE1
Write : TEE2
Write : SECRO
Write : SYSTEM
Write : VERSION
FAIL : SEC : IMG TYPE MISMATCH
Write : CUST
FAIL : SEC : IMG TOO LARGE
Write : PRODUCT
FAIL : SEC : IMG TYPE MISMATCH
Write : CACHE
Write : USERDATA

Ultra : Ok!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : RePartition 
[FL] : RePartition Ok!

[FL] : Flashing finished!

Done!
Elapsed: 00:03:16
Hello dear Mr. Jaydi I know that is not the issue here but tell me if you could review the files that you asked me at the end of the year about the problem of the logic l50t processor phones. CPU: Quad-Core. Chipset: SC9832E. UNISOC.
Memory. ROM: 16GB. RAM: 1 GB. Micro SD: Up to 32 GB. That when I make the software copy of a new one to use it in the other damaged one I get the legend no google key help me with that please I have about 3 cell phones waiting in the service store help me by favor
  Reply With Quote
Old 01-08-2021, 22:10   #15 (permalink)
Product Supporter
 
Join Date: Jun 2009
Location: private
Posts: 36,475
Member: 1043909
Status: Offline
Thanks Meter: 60,926
Quote:
Originally Posted by okb View Post
PTFN : MediaTek PreLoader USB VCOM (Android) (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
MODE : TECNO : BASE_SECURE | Manual : Enabled
BROM : SOCID : 3ECFDF30AC070D2F1694D6EDDEBFF0F3E62D5495115D87D9BA 97594537484291
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 90014A68423861503E03C2E95C613793
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : hB8aP>
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : C90F943074B90D86C00F79BE276917FA

DA : USB : HIGH-SPEED

Boot done!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : Pre-Erase
Erase : 0x0000000000008000 : 0x0000000000100000
Erase : 0x0000000000408000 : 0x0000000004C1A000
Erase : 0x0000000007022000 : 0x00000000047DE000
Erase : 0x000000000F800000 : 0x000000000BB00000
Erase : 0x000000001F300000 : 0x00000001A1500000


[FL] : Flashing now ...

Write : TKV
Write : RECOVERY
Write : MD1IMG
Write : SPMFW
Write : SCP1
Write : SCP2
Write : SSPM_1
Write : SSPM_2
Write : LK
Write : LK2
Write : BOOT
Write : LOGO
Write : DTBO
Write : TEE1
Write : TEE2
Write : VBMETA
Write : VBMETA_SYSTEM
FAIL : SEC : IMG TYPE MISMATCH
ERR : 0xC002002A
ERR : SEC : IMG TYPE MISMATCH
ERR : 0x00001000|0x00001000

Error : Flashing failed!
>>> Seems as something wrong with device! Check battery charge and device state!

x680
what is the phone name ?
what is the problem with phone ?
  Reply With Quote
Reply
Page 1 of 2 1 2

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 



All times are GMT +1. The time now is 00:39.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.32348 seconds with 9 queries

SEO by vBSEO