myway touch can't be unlocked - GSM-Forum

patric · 07-23-2010, 08:47

COM8 [VCP0] selected
module v3.51
Action: "sp-unlock"
unlock method: smart fast
Model: Modelabs-MyWay-Slim
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6228:8A02:8A02]...
CPU: MT6228
chip: 0031:AE89:0101
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6228,E02
Date: 2004.07.02
Version: 1.0
Version: MAUI.07A.W07.28.MP.V22.F2
Version: EZIO28_07A_HW
60 byte(s) read
connection Ok
208 byte(s) read
reading data...
reading data #2...
reading data #3...
reading data #4...
reading data #5...
Unknown or damaged lock structure, what to do:
1. repeat operation and press and HOLD "Power" button more long time
2. use another unlock method, f.e. "unlock method: standard"
3. if nothing helps: read flash and send to support: [email protected]
error: operation failed !
Finished, time used: 19 sec
Remove/Install battery now !

i tried all method for unlock but the same problem always error
phone is showing np code .

YellowBoss · 07-23-2010, 09:39

Quote:

Originally Posted by patric

COM8 [VCP0] selected
module v3.51
Action: "sp-unlock"
unlock method: smart fast
Model: Modelabs-MyWay-Slim
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6228:8A02:8A02]...
CPU: MT6228
chip: 0031:AE89:0101
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6228,E02
Date: 2004.07.02
Version: 1.0
Version: MAUI.07A.W07.28.MP.V22.F2
Version: EZIO28_07A_HW
60 byte(s) read
connection Ok
208 byte(s) read
reading data...
reading data #2...
reading data #3...
reading data #4...
reading data #5...
Unknown or damaged lock structure, what to do:
1. repeat operation and press and HOLD "Power" button more long time
2. use another unlock method, f.e. "unlock method: standard"
3. if nothing helps: read flash and send to support: [email protected]
error: operation failed !
Finished, time used: 19 sec
Remove/Install battery now !

i tried all method for unlock but the same problem always error
phone is showing np code .

What model you want to unlock ?

patric · 07-23-2010, 11:36

YellowBoss · 07-23-2010, 16:04

You write in thread name: "myway touch"
so why you select Modelabs-MyWay-Slim model in software ???
modelabs, touch, slim... no difference ?

LoveLess · 08-18-2010, 13:29

Quote:

Originally Posted by YellowBoss

You write in thread name: "myway touch"
so why you select Modelabs-MyWay-Slim model in software ???
modelabs, touch, slim... no difference ?

mY WAY touch ask for Code NP..what is this..? phone lock code is 0000..and there is not any code else..but not accepting this code.. 0000

Code:

connection Ok
157 byte(s) read
166 byte(s) read
Phone lock: Off
Network lock: Off
Network subset lock: Off
Service provider lock: Off
Corporate lock: Off
IMSI lock: Off
Auto lock: Off
Phone code: 0000
Finished, time used: 18 sec
Remove/Install battery now !

LoveLess · 08-18-2010, 16:22

Quote:

Originally Posted by LoveLess

mY WAY touch ask for Code NP..what is this..? phone lock code is 0000..and there is not any code else..but not accepting this code.. 0000

Code:

connection Ok
157 byte(s) read
166 byte(s) read
Phone lock: Off
Network lock: Off
Network subset lock: Off
Service provider lock: Off
Corporate lock: Off
IMSI lock: Off
Auto lock: Off
Phone code: 0000
Finished, time used: 18 sec
Remove/Install battery now !

nobody has any idea..?

YellowBoss · 08-18-2010, 18:48

Check phone imei and repair it according to imei from phone back label.

LoveLess · 08-18-2010, 23:49

Quote:

Originally Posted by YellowBoss

Check phone imei and repair it according to imei from phone back label.

yes sir i done it.. nothing changed..same.. i totaly formatted the device.. completly..but still same code..phone lang now FR..

LoveLess · 08-19-2010, 11:10

Quote:

Originally Posted by YellowBoss

Check phone imei and repair it according to imei from phone back label.

any idea sir..?

still waiting for ur support..

YellowBoss · 08-20-2010, 16:13

"NP code" is a simlock (operator lock).
Did you tried to make "sp-unlock" operation with different unlock methods ?

LoveLess · 08-20-2010, 19:21

Quote:

Originally Posted by YellowBoss

"NP code" is a simlock (operator lock).
Did you tried to make "sp-unlock" operation with different unlock methods ?

yes sir.. i did..but not success.. but in phone log there is no network code.

Code:

connection Ok
157 byte(s) read
166 byte(s) read
Phone lock: Off
Network lock: Off
Network subset lock: Off
Service provider lock: Off
Corporate lock: Off
IMSI lock: Off
Auto lock: Off
Phone code: 0000
Finished, time used: 18 sec
Remove/Install battery now !

YellowBoss · 08-20-2010, 20:50

Do not make "read codes", make unlock via other methods !

LoveLess · 08-20-2010, 20:57

Quote:

Originally Posted by YellowBoss

Do not make "read codes", make unlock via other methods !

other methods r not supported sir.. only reade codes unlocking available.. i tried it too...

YellowBoss · 08-20-2010, 21:01

You are wrong, other unlock methods available for this model also.
What you have tried to do exactly ?

LuisinhoCell · 08-20-2010, 21:16

4 methods

Luisinho

07-23-2010, 08:47	#1 (permalink)
patric No Life Poster Join Date: Jan 2002 Location: tunis,Tunisia Age: 54 Posts: 5,436 Member: 8228 Status: Offline Sonork: 12399830 Thanks Meter: 136	myway touch can't be unlocked COM8 [VCP0] selected module v3.51 Action: "sp-unlock" unlock method: smart fast Model: Modelabs-MyWay-Slim Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6228:8A02:8A02]... CPU: MT6228 chip: 0031:AE89:0101 status: FF Connecting at 19200, wait... Release Power button now ! Phone detected, wait... Hardware: MT6228,E02 Date: 2004.07.02 Version: 1.0 Version: MAUI.07A.W07.28.MP.V22.F2 Version: EZIO28_07A_HW 60 byte(s) read connection Ok 208 byte(s) read reading data... reading data #2... reading data #3... reading data #4... reading data #5... Unknown or damaged lock structure, what to do: 1. repeat operation and press and HOLD "Power" button more long time 2. use another unlock method, f.e. "unlock method: standard" 3. if nothing helps: read flash and send to support: [email protected] error: operation failed ! Finished, time used: 19 sec Remove/Install battery now ! i tried all method for unlock but the same problem always error phone is showing np code .

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
$50 Reward for unlocking my 6150!!!	TheDon	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	03-23-2015 14:21
FAQ about unlock n0kia	man0n	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	11-29-2010 19:06

07-23-2010, 11:36	#3 (permalink)
patric No Life Poster Join Date: Jan 2002 Location: tunis,Tunisia Age: 54 Posts: 5,436 Member: 8228 Status: Offline Sonork: 12399830 Thanks Meter: 136

07-23-2010, 16:04	#4 (permalink)
YellowBoss Product Supporter Join Date: Jun 2009 Location: private Posts: 36,458 Member: 1043909 Status: Offline Thanks Meter: 60,926	You write in thread name: "myway touch" so why you select Modelabs-MyWay-Slim model in software ??? modelabs, touch, slim... no difference ?

08-18-2010, 18:48	#7 (permalink)
YellowBoss Product Supporter Join Date: Jun 2009 Location: private Posts: 36,458 Member: 1043909 Status: Offline Thanks Meter: 60,926	Check phone imei and repair it according to imei from phone back label.

08-20-2010, 16:13	#10 (permalink)
YellowBoss Product Supporter Join Date: Jun 2009 Location: private Posts: 36,458 Member: 1043909 Status: Offline Thanks Meter: 60,926	"NP code" is a simlock (operator lock). Did you tried to make "sp-unlock" operation with different unlock methods ?

08-20-2010, 20:50	#12 (permalink)
YellowBoss Product Supporter Join Date: Jun 2009 Location: private Posts: 36,458 Member: 1043909 Status: Offline Thanks Meter: 60,926	Do not make "read codes", make unlock via other methods !

08-20-2010, 21:01	#14 (permalink)
YellowBoss Product Supporter Join Date: Jun 2009 Location: private Posts: 36,458 Member: 1043909 Status: Offline Thanks Meter: 60,926	You are wrong, other unlock methods available for this model also. What you have tried to do exactly ?

08-20-2010, 21:16	#15 (permalink)
LuisinhoCell No Life Poster Join Date: Apr 2006 Location: Made In Brazil Age: 42 Posts: 3,030 Member: 264903 Status: Offline Sonork: 1584531 Thanks Meter: 3,350	4 methods Luisinho