new SPD device itel 6525 - Page 2 - GSM-Forum

sajjad akram · 07-10-2020, 17:28

Quote:

Originally Posted by Momin_Telecom

Much better post Image Of CPU Full details Brand / Model

then you can get it Good response

and All of my Dear Senior Brother Nothing Need more Reply with out See Image of cpu

Thanks In Advance

Sc6531ca cpu inside any update to reset password.

Sent from my VTR-L09 using Tapatalk

Yusuf Lawal · 07-10-2020, 22:46

Quote:

Originally Posted by sajjad akram

Sc6531ca cpu inside any update to reset password.

Sent from my VTR-L09 using Tapatalk

Cm2scr v1.06 via SVC mode

Tanha0321 · 02-22-2021, 10:57

Code:

Operation : Read UserCode [ v1.07 ]

1. Power off device
2. Not hold any key on device!
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

UserCode : 0346

Done!
Elapsed: 00:00:18

Reconnect Power/Cable!

ojongson · 06-08-2021, 21:45

it5625 read in svc mode. just activate svc(diag) and connect phone without press any bottom

Operation : Identify [ v1.06 ]
BootMode : SVC

1. Power off device
2. Not hold any key on device!
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

ModemInfo :
Platform Version: MOCOR_12C.W13.04.14_Debug
Project Version: it5625-G2803A-EnFrPoArSwHa-20170616
BASE Version: BASE_SVN
HW Version: fp6531_bar
CMP_Time : 06-16-2017 20:37:04

SecInfo :
IMEI[1] : 359054088367275
IMEI[2] : 359054088367283
IMEI[3] : 000000000000000
WIFIMAC : FFFFFFFFFFFF
BT_MAC : 58C583F6D3ED

Done!
Elapsed: 00:00:24

ojongson · 06-08-2021, 21:48

read flash mode or flash phone. it took me some time and googling. but I finally find the bottom. press the first bottom on your left and connect the phone

Operation : Read Flash [ v1.06 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Spreadtrum Boot Block version 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q64 : 0x00800000 [ 8MiB ]

Read Flash Ok, Size : 8,00 MiB

Platform Version: MOCOR_12C.W13.04.14_Debug
G2803A_it5625_64X64_240X320BAR_EnFrPoArSwHa
Project Version: it5625-G2803A-EnFrPoArSwHa-20170616
MMI Version: it5625-G2803A-EnFrPoArSwHa-20170616
BASE Version: BASE_SVN
HW Version: fp6531_bar
06-16-2017 20:37:04
LOG Version: V1.0.1
Saved to : D:\FLASH\MOCOR_12C.W13.04.14_Debug
G2803A_it5625_64X64_240X320BAR_EnFrPoArSwHa.bin

Done!
Elapsed: 00:01:52

allttar · 06-08-2021, 22:11

Quote:

Originally Posted by Elasunuas

boot unknown yet but others are still complaing about it

Operation : Format FileSystem [ v1.03 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
ERROR : FDL NOT started!

Error : Loader send failed!
Wrong model selected! Select correct one!

Reconnect Power/Cable!

SPRD mode : SC6531 : REV : C000 : NOR

Operation : Format FileSystem [ v1.03 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
ERROR : FDL NOT started!

Error : Loader send failed!
Wrong model selected! Select correct one!

Reconnect Power/Cable!

SPRD mode : SC6531 : REV : A000 : NOR

Operation : Format FileSystem [ v1.03 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.03 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.03 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.03 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
ERROR : FDL NOT started!

Error : Loader send failed!
Wrong model selected! Select correct one!

Reconnect Power/Cable!

SPRD mode : SC6531 : REV : 0000 : NOR

Operation : Format FileSystem [ v1.03 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
ERROR : FDL NOT started!

Error : Loader send failed!
Wrong model selected! Select correct one!

Reconnect Power/Cable!

SPRD mode : SC6531 : REV : E000 : NOR

Operation : Identify [ v1.03 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device not found!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Identify [ v1.03 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.03 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
ERROR : FDL NOT started!

Error : Loader send failed!
Wrong model selected! Select correct one!

Reconnect Power/Cable!

SPRD mode : SC6531

old model
supported
CM2SPD

new sprd 6531e
supported
CM2SCR

donpaul · 06-09-2021, 07:15

Just tick diag mode brother and reset phone.

ojongson · 06-09-2021, 18:50

sim problem making phone keep rebooting when sim inside. or when avon mode is deactivated

Operation : Repair Security [ v1.06 ]

1. Power off the device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Spreadtrum Boot Block version 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q64 : 0x00800000 [ 8MiB ]

OLD IMEI[1] : 359054088367275
NEW IMEI[1] : 359054088367275
NVMng : Update Ok!

OLD IMEI[2] : 359054088367283
NEW IMEI[2] : 359054088367283
NVMng : Update Ok!

OLD IMEI[3] : 359054088367291
NEW IMEI[3] : 359054088367291
NVMng : Update Ok!

NVMng : Aplly new settings ...
NVMng : Security data updated!

Done!
Elapsed: 00:00:39

JayDi · 06-09-2021, 20:30

Quote:

Originally Posted by ojongson

sim problem making phone keep rebooting when sim inside. or when avon mode is deactivated

Operation : Repair Security [ v1.06 ]

1. Power off the device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Spreadtrum Boot Block version 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q64 : 0x00800000 [ 8MiB ]

OLD IMEI[1] : 359054088367275
NEW IMEI[1] : 359054088367275
NVMng : Update Ok!

OLD IMEI[2] : 359054088367283
NEW IMEI[2] : 359054088367283
NVMng : Update Ok!

OLD IMEI[3] : 359054088367291
NEW IMEI[3] : 359054088367291
NVMng : Update Ok!

NVMng : Aplly new settings ...
NVMng : Security data updated!

Done!
Elapsed: 00:00:39

It not make sense, because problem have HW nature.

ojongson · 06-09-2021, 21:08

Quote:

Originally Posted by JayDi

It not make sense, because problem have HW nature.

I repair the IMEI and the phone is okay now. from the beginning, I was convinced that it was related to NV file. for without sim and Avon mode on phone work without any problem. but when put sim, that will deactivate the Avon mode. just after the phone comes on, few seconds later a message with pup up and said the phone is going to turn off

JayDi · 06-10-2021, 07:10

Ok, please, next time mention that in message with log to avoid misunderstanding.
It may help other users as well.

ojongson · 06-10-2021, 08:16

Quote:

Originally Posted by ojongson

sim problem making phone keep rebooting when sim inside. or when avon mode is deactivated

Operation : Repair Security [ v1.06 ]

1. Power off the device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Spreadtrum Boot Block version 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q64 : 0x00800000 [ 8MiB ]

OLD IMEI[1] : 359054088367275
NEW IMEI[1] : 359054088367275
NVMng : Update Ok!

OLD IMEI[2] : 359054088367283
NEW IMEI[2] : 359054088367283
NVMng : Update Ok!

OLD IMEI[3] : 359054088367291
NEW IMEI[3] : 359054088367291
NVMng : Update Ok!

NVMng : Aplly new settings ...
NVMng : Security data updated!

Done!
Elapsed: 00:00:39

read well as you can see it is well mentioned about the problem

JayDi · 06-10-2021, 09:19

Quote:

Originally Posted by ojongson

read well as you can see it is well mentioned about the problem

Just one word before or after your first message, for example - "solved", will change all and will be completely clear:

Quote:

sim problem making phone keep rebooting when sim inside. or when avon mode is deactivated

and with :

Quote:

solved sim problem making phone keep rebooting when sim inside. or when avon mode is deactivated

or

Quote:

sim problem making phone keep rebooting when sim inside. or when avon mode is deactivated solved

And not need ask more question and explain in details, or leave message in superposition - is it question or constatation.

06-08-2021, 21:45	#19 (permalink)
ojongson Freak Poster Join Date: Aug 2006 Location: gabon, oyem Posts: 351 Member: 327704 Status: Offline Thanks Meter: 84	it5625 read in svc mode. just activate svc(diag) and connect phone without press any bottom Operation : Identify [ v1.06 ] BootMode : SVC 1. Power off device 2. Not hold any key on device! 3. Insert cable and battery in device! Wait for device ... Device Connected! Enter SVC ... Waiting Device ... Check SVC ... SVC : DiagChannel opened! Boot Done! ModemInfo : Platform Version: MOCOR_12C.W13.04.14_Debug Project Version: it5625-G2803A-EnFrPoArSwHa-20170616 BASE Version: BASE_SVN HW Version: fp6531_bar CMP_Time : 06-16-2017 20:37:04 SecInfo : IMEI[1] : 359054088367275 IMEI[2] : 359054088367283 IMEI[3] : 000000000000000 WIFIMAC : FFFFFFFFFFFF BT_MAC : 58C583F6D3ED Done! Elapsed: 00:00:24

06-08-2021, 21:48	#20 (permalink)
ojongson Freak Poster Join Date: Aug 2006 Location: gabon, oyem Posts: 351 Member: 327704 Status: Offline Thanks Meter: 84	read flash mode or flash phone. it took me some time and googling. but I finally find the bottom. press the first bottom on your left and connect the phone Operation : Read Flash [ v1.06 ] 1. Power off device 2. Press and hold BootKey or use BootCable 3. Insert cable and battery in device! Wait for device ... Device Connected! BootVersion : SPRD3 BootSource : InternalLibrary BootVersion : Spreadtrum Boot Block version 1.2 Port speed : 921600 FDL Flash : Control transfered! Boot Done! CS0_MEM : SPI : [GIGADEVICE] : GD25Q64 : 0x00800000 [ 8MiB ] Read Flash Ok, Size : 8,00 MiB Platform Version: MOCOR_12C.W13.04.14_Debug G2803A_it5625_64X64_240X320BAR_EnFrPoArSwHa Project Version: it5625-G2803A-EnFrPoArSwHa-20170616 MMI Version: it5625-G2803A-EnFrPoArSwHa-20170616 BASE Version: BASE_SVN HW Version: fp6531_bar 06-16-2017 20:37:04 LOG Version: V1.0.1 Saved to : D:\FLASH\MOCOR_12C.W13.04.14_Debug G2803A_it5625_64X64_240X320BAR_EnFrPoArSwHa.bin Done! Elapsed: 00:01:52

06-09-2021, 07:15	#22 (permalink)
donpaul Freak Poster Join Date: Sep 2014 Location: Kenya Posts: 214 Member: 2251589 Status: Offline Thanks Meter: 44	Just tick diag mode brother and reset phone.

06-09-2021, 18:50	#23 (permalink)
ojongson Freak Poster Join Date: Aug 2006 Location: gabon, oyem Posts: 351 Member: 327704 Status: Offline Thanks Meter: 84	sim problem making phone keep rebooting when sim inside. or when avon mode is deactivated Operation : Repair Security [ v1.06 ] 1. Power off the device 2. Press and hold BootKey or use BootCable 3. Insert cable and battery in device! Wait for device ... Device Connected! BootVersion : SPRD3 BootSource : InternalLibrary BootVersion : Spreadtrum Boot Block version 1.2 Port speed : 921600 FDL Flash : Control transfered! Boot Done! CS0_MEM : SPI : [GIGADEVICE] : GD25Q64 : 0x00800000 [ 8MiB ] OLD IMEI[1] : 359054088367275 NEW IMEI[1] : 359054088367275 NVMng : Update Ok! OLD IMEI[2] : 359054088367283 NEW IMEI[2] : 359054088367283 NVMng : Update Ok! OLD IMEI[3] : 359054088367291 NEW IMEI[3] : 359054088367291 NVMng : Update Ok! NVMng : Aplly new settings ... NVMng : Security data updated! Done! Elapsed: 00:00:39

06-10-2021, 07:10	#26 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Ok, please, next time mention that in message with log to avoid misunderstanding. It may help other users as well.