NOKIA C21 network unlock not work - GSM-Forum

yuranc8 · 07-06-2022, 12:23

Code:

Card found : 5C203D37 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : CosmoRefresh_00WW-user 11 RP1A.201005.001 V1.070_B01 release-keys
Platform Version: MOCORTM_20A_W22.04.2_Debug
Project Version:   sharkl3_pub
BASE  Version:    4G_MODEM_20A_W22.04.2
HW Version:        sc9863A_modem
CMP_Time : 01-25-2022 01:49:43

MODEM TAG : MOCORTM_20A_W22.04.2_Debug_4G_MODEM_20A_W22.04.2_sc9863A_modem_sharkl3_pub

NVMng  : SecurityInfo 
IMEI[1] : 356616854195818
IMEI[2] : 356616854195826
WIFIMAC : 44917C552F79
BT_MAC  : 44917C552F78
SEC : SLS:2, SKS:1, SKV:4

SLStatus : 2C
Status : Locked! Server unlock required!

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 6,  price:5
Process...
Process : Operation may took 10-15 minutes!


>>>  Repeat unlock/repair procedure after requested time again!

Reconnect Power/Cable!

Code:

Card found : 5C203D37 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : CosmoRefresh_00WW-user 11 RP1A.201005.001 V1.070_B01 release-keys
Platform Version: MOCORTM_20A_W22.04.2_Debug
Project Version:   sharkl3_pub
BASE  Version:    4G_MODEM_20A_W22.04.2
HW Version:        sc9863A_modem
CMP_Time : 01-25-2022 01:49:43

MODEM TAG : MOCORTM_20A_W22.04.2_Debug_4G_MODEM_20A_W22.04.2_sc9863A_modem_sharkl3_pub

NVMng  : SecurityInfo 
IMEI[1] : 356616854195818
IMEI[2] : 356616854195826
WIFIMAC : 44917C552F79
BT_MAC  : 44917C552F78
SEC : SLS:2, SKS:1, SKV:4

SLStatus : 2C
Status : Locked! Server unlock required!

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 1,  price:5
Process...
Finished

Unlocking device ... 
Sync data ... 
Device unlocked!

Done!
Elapsed: 00:01:42

Code:

Card found : 5C203D37 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : CosmoRefresh_00WW-user 11 RP1A.201005.001 V1.070_B01 release-keys
Platform Version: MOCORTM_20A_W22.04.2_Debug
Project Version:   sharkl3_pub
BASE  Version:    4G_MODEM_20A_W22.04.2
HW Version:        sc9863A_modem
CMP_Time : 01-25-2022 01:49:43

MODEM TAG : MOCORTM_20A_W22.04.2_Debug_4G_MODEM_20A_W22.04.2_sc9863A_modem_sharkl3_pub

NVMng  : SecurityInfo 
IMEI[1] : 356616854195818
IMEI[2] : 356616854195826
WIFIMAC : 44917C552F79
BT_MAC  : 44917C552F78
SEC : SLS:2, SKS:1, SKV:4

SLStatus : 2C
Status : Locked! Server unlock required!

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 6,  price:5
Process...
Finished

Unlocking device ... 
Sync data ... 
Device unlocked!

Done!
Elapsed: 00:02:49

Code:

Operation : Read NVM [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

BuildInfo : CosmoRefresh_00WW-user 11 RP1A.201005.001 V1.070_B01 release-keys

Platform Version: MOCORTM_20A_W22.04.2_Debug
Project Version:   sharkl3_pub
BASE  Version:    4G_MODEM_20A_W22.04.2
HW Version:        sc9863A_modem
CMP_Time : 01-25-2022 01:49:43

MODEM TAG : MOCORTM_20A_W22.04.2_Debug_4G_MODEM_20A_W22.04.2_sc9863A_modem_sharkl3_pub

NVMng  : SecurityInfo 
IMEI[1] : 356616854195818
IMEI[2] : 356616854195826
WIFIMAC : 44917C552F79
BT_MAC  : 44917C552F78
SEC : SLS:2, SKS:1, SKV:4

NVMng  : Reading NV. Please, wait ...
NVMng  : Backup Ok , 0x000EBD78

NVMng  : Saved as : 356616854195818_diag.nvm
NVMng  : Saved to : C:\InfinityBox\CM2SP2\Backup\356616854195818\
Reconnect Power/Cable!

Done!
Elapsed: 00:02:47

yuranc8 · 07-06-2022, 12:26

please refund lost log or update me i'll keep phone for a while

yuranc8 · 07-09-2022, 10:22

bump bump bump bump bump

YellowBoss · 07-09-2022, 14:23

Hello,
As I can see it was uploadd to server and calculated well.
What is the problem with the phone after unlock?

yuranc8 · 07-09-2022, 15:36

Hello still locked asking for network unlock code thats why i did upload nvram bckup

YellowBoss · 07-10-2022, 23:35

Hi,
refunded. Checking backup file now.

YellowBoss · 07-15-2022, 15:40

Hi,
If you still have this phone on hands you can try it once again now.
Waiting for results.

yuranc8 · 07-15-2022, 15:53

Ok i'll try it
wait call my client again

yuranc8 · 07-22-2022, 21:04

after retry phone won't boot check

yuranc8 · 07-22-2022, 21:06

Seems like restore nvraam DIAG mode won't work too

Operation : Write NVM [ v2.14 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
>>> ERROR : Protocol HandShake failed!

>>> Error : Fail to init protocol!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

Wipe Ok : UserData
>>> INFO : FRP reset require FlashMode!

Reconnect Power/Cable!

Done!
Elapsed: 00:01:09

Operation : Write NVM [ v2.14 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

yuranc8 · 07-22-2022, 21:08

Can't restore NVM diag not work

Operation : Write NVM [ v2.14 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
>>> ERROR : Protocol HandShake failed!

>>> Error : Fail to init protocol!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

JayDi · 07-23-2022, 11:37

@yuranc8, is it same device? As in first post.

yuranc8 · 07-23-2022, 12:56

Quote:

Originally Posted by JayDi

@yuranc8, is it same device? As in first post.

Hello yes, i lost your TG, but anyway become like this after support told me retry unlock ' i posted security backup after 2nd try!

yuranc8 · 07-27-2022, 13:28

hello phone still here and client on my back

InfinityHelp · 07-28-2022, 09:33

Hello,
yes, checking what can be done for it.

07-06-2022, 12:26	#2 (permalink)
yuranc8 No Life Poster Join Date: Feb 2017 Location: Quelimane Mz Age: 26 Posts: 2,210 Member: 2680008 Status: Offline Thanks Meter: 1,640	please refund lost log or update me i'll keep phone for a while

07-09-2022, 10:22	#3 (permalink)
yuranc8 No Life Poster Join Date: Feb 2017 Location: Quelimane Mz Age: 26 Posts: 2,210 Member: 2680008 Status: Offline Thanks Meter: 1,640	bump bump bump bump bump

07-09-2022, 14:23	#4 (permalink)
YellowBoss Product Supporter Join Date: Jun 2009 Location: private Posts: 36,475 Member: 1043909 Status: Offline Thanks Meter: 60,926	Hello, As I can see it was uploadd to server and calculated well. What is the problem with the phone after unlock?

07-09-2022, 15:36	#5 (permalink)
yuranc8 No Life Poster Join Date: Feb 2017 Location: Quelimane Mz Age: 26 Posts: 2,210 Member: 2680008 Status: Offline Thanks Meter: 1,640	Hello still locked asking for network unlock code thats why i did upload nvram bckup

07-10-2022, 23:35	#6 (permalink)
YellowBoss Product Supporter Join Date: Jun 2009 Location: private Posts: 36,475 Member: 1043909 Status: Offline Thanks Meter: 60,926	Hi, refunded. Checking backup file now.

07-15-2022, 15:40	#7 (permalink)
YellowBoss Product Supporter Join Date: Jun 2009 Location: private Posts: 36,475 Member: 1043909 Status: Offline Thanks Meter: 60,926	Hi, If you still have this phone on hands you can try it once again now. Waiting for results.

07-15-2022, 15:53	#8 (permalink)
yuranc8 No Life Poster Join Date: Feb 2017 Location: Quelimane Mz Age: 26 Posts: 2,210 Member: 2680008 Status: Offline Thanks Meter: 1,640	Ok i'll try it wait call my client again

07-22-2022, 21:06	#10 (permalink)
yuranc8 No Life Poster Join Date: Feb 2017 Location: Quelimane Mz Age: 26 Posts: 2,210 Member: 2680008 Status: Offline Thanks Meter: 1,640	Seems like restore nvraam DIAG mode won't work too Operation : Write NVM [ v2.14 ] 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! >>> ERROR : Protocol HandShake failed! >>> Error : Fail to init protocol! >>> Remove battery, cable. Check cable and connection. Repeat operation! Reconnect Power/Cable! Operation : Format FS / Reset Settings [ v2.14 ] Mode : Default [ Reset Settings + FRP ] BootMode : SVC 1. Power off device, wait 10-15 seconds 2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! Enter SVC ... Waiting Device ... Check SVC ... SVC : DiagChannel opened! Boot Done! Wipe Ok : UserData >>> INFO : FRP reset require FlashMode! Reconnect Power/Cable! Done! Elapsed: 00:01:09 Operation : Write NVM [ v2.14 ] 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ...

07-22-2022, 21:08	#11 (permalink)
yuranc8 No Life Poster Join Date: Feb 2017 Location: Quelimane Mz Age: 26 Posts: 2,210 Member: 2680008 Status: Offline Thanks Meter: 1,640	Can't restore NVM diag not work Operation : Write NVM [ v2.14 ] 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! >>> ERROR : Protocol HandShake failed! >>> Error : Fail to init protocol! >>> Remove battery, cable. Check cable and connection. Repeat operation! Reconnect Power/Cable!

07-23-2022, 11:37	#12 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	@yuranc8, is it same device? As in first post.

07-27-2022, 13:28	#14 (permalink)
yuranc8 No Life Poster Join Date: Feb 2017 Location: Quelimane Mz Age: 26 Posts: 2,210 Member: 2680008 Status: Offline Thanks Meter: 1,640	hello phone still here and client on my back

07-28-2022, 09:33	#15 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	Hello, yes, checking what can be done for it.