GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 07-23-2020, 18:59   #1 (permalink)
No Life Poster
 
Join Date: Nov 2006
Location: Pakistan
Age: 45
Posts: 1,132
Member: 383211
Status: Offline
Thanks Meter: 131
nokia hmd ta-1139 dead after write file in cm2


.i format it befoe writing its own backup .mobile formted but when insert sim after little while mobile hanged.nokia hmd ta-1139 dead after write file in cm2.show this error after writing finished
Quote:
[ERROR] : DA_UART_RX_BUF_FULL
Flash Error!
Check Cable, Battery , try again
Card found : S/N : 53471D69 , v0144
Chinese Miracle II [MTK module] v 1.58

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 67 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 7F7F0E99E94C2EF362A5AF4B796B6C67
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EC , [GigaDevice] GD25LQ32
[0] : FLASH_DIE : 00C8 0060 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

File_Info : MXWD012_D_HL_M258S_QMOBILE_PCB01_gprs_MT6261_S00.Q MOBILE_N222_V07_09_01_2017.bin
FileVersion : QMobile_N222_V07_09_01_2017

Done!
Elapsed: 00:00:31
Reconnect Power/Cable!



1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 67 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 7F7F0E99E94C2EF362A5AF4B796B6C67
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EC , [GigaDevice] GD25LQ32
[0] : FLASH_DIE : 00C8 0060 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

Backup done
Executing FFS FORMAT now...
FAT_RANGE : 0x00393000-0x003FDFFF , LEN : 0x0006B000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE

Done!
Elapsed: 00:00:25
Reconnect Power/Cable!




Load File
File_Info : KEYTAK60A_M210_PCB01_gprs_MT6260_S00.M210_IJ_7789V N_190803_V01.bin
FileVersion : M210_IJ_7789VN_190803_V01
Load File Ok

Operation : Flash [ v1.58 ]

======= Flash
Files set for flashing :
[ MCU ] : KEYTAK60A_M210_PCB01_gprs_MT6260_S00.M210_IJ_7789V N_190803_V01.bin

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 67 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : 13641B4AD8C4280BE777CAD4F26F9A3A
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C200 2500 3800 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EF , [MXIC] MX25U12835FZNI_10G
[0] : FLASH_DIE : 00C2 0025 0038 0000
[0] : FLASH_LEN : 0x01000000
SDS_INFO : 0x00FFE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000

File_Info : KEYTAK60A_M210_PCB01_gprs_MT6260_S00.M210_IJ_7789V N_190803_V01.bin
FileVersion : M210_IJ_7789VN_190803_V01
Flash now

Erase region , wait ...
Write data , wait ...
Write : KEYTAK60A_M210_PCB01_gprs_MT6260_S00.M210_IJ_7789V N_190803_V01.bin
[ERROR] : DA_UART_RX_BUF_FULL
Flash Error!
Check Cable, Battery , try again

Operation Failed
Elapsed: 00:02:02
Reconnect Power/Cable!
  Reply With Quote
Old 07-24-2020, 14:43   #2 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Location: Where you live
Posts: 18,542
Member: 462970
Status: Offline
Thanks Meter: 20,352
In most cases that mean damage of FlashIC.
  Reply With Quote
The Following 4 Users Say Thank You to JayDi For This Useful Post:
Show/Hide list of the thanked
Old 07-30-2020, 10:10   #3 (permalink)
Crazy Poster
 
Join Date: Feb 2018
Location: Sheikhupura Pakistan
Posts: 57
Member: 2812460
Status: Offline
Thanks Meter: 11
Quote:
Originally Posted by JayDi View Post
In most cases that mean damage of FlashIC.
i have same problem also. please share tested file and solution also.. my mobile was 100 % working only problem was that game charges were deducting by telenor every week thats why i flashed it.. i also take backup but when i load that file it says bad file.. plz help
  Reply With Quote
Old 07-30-2020, 11:12   #4 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Location: Where you live
Posts: 18,542
Member: 462970
Status: Offline
Thanks Meter: 20,352
Quote:
Originally Posted by mohammadadnan View Post
i have same problem also. please share tested file and solution also.. my mobile was 100 % working only problem was that game charges were deducting by telenor every week thats why i flashed it.. i also take backup but when i load that file it says bad file.. plz help
Make sure about you read FactoryFW, maybe? It can be flashed via MTK FlashTool ( NOT SP Flash Tool )
  Reply With Quote
The Following User Says Thank You to JayDi For This Useful Post:
Old 07-31-2020, 22:12   #5 (permalink)
No Life Poster
 
ddilshod93's Avatar
 
Join Date: Dec 2013
Location: Uzbekistan/Tashkent
Posts: 962
Member: 2082192
Status: Offline
Sonork: not
Thanks Meter: 1,119
Donate money to this user
Quote:
Originally Posted by pakmobiles View Post
.i format it befoe writing its own backup .mobile formted but when insert sim after little while mobile hanged.nokia hmd ta-1139 dead after write file in cm2.show this error after writing finished
Card found : S/N : 53471D69 , v0144
Chinese Miracle II [MTK module] v 1.58

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 67 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 7F7F0E99E94C2EF362A5AF4B796B6C67
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EC , [GigaDevice] GD25LQ32
[0] : FLASH_DIE : 00C8 0060 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

File_Info : MXWD012_D_HL_M258S_QMOBILE_PCB01_gprs_MT6261_S00.Q MOBILE_N222_V07_09_01_2017.bin
FileVersion : QMobile_N222_V07_09_01_2017

Done!
Elapsed: 00:00:31
Reconnect Power/Cable!



1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 67 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 7F7F0E99E94C2EF362A5AF4B796B6C67
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EC , [GigaDevice] GD25LQ32
[0] : FLASH_DIE : 00C8 0060 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

Backup done
Executing FFS FORMAT now...
FAT_RANGE : 0x00393000-0x003FDFFF , LEN : 0x0006B000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE

Done!
Elapsed: 00:00:25
Reconnect Power/Cable!




Load File
File_Info : KEYTAK60A_M210_PCB01_gprs_MT6260_S00.M210_IJ_7789V N_190803_V01.bin
FileVersion : M210_IJ_7789VN_190803_V01
Load File Ok

Operation : Flash [ v1.58 ]

======= Flash
Files set for flashing :
[ MCU ] : KEYTAK60A_M210_PCB01_gprs_MT6260_S00.M210_IJ_7789V N_190803_V01.bin

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 67 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : 13641B4AD8C4280BE777CAD4F26F9A3A
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C200 2500 3800 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EF , [MXIC] MX25U12835FZNI_10G
[0] : FLASH_DIE : 00C2 0025 0038 0000
[0] : FLASH_LEN : 0x01000000
SDS_INFO : 0x00FFE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000

File_Info : KEYTAK60A_M210_PCB01_gprs_MT6260_S00.M210_IJ_7789V N_190803_V01.bin
FileVersion : M210_IJ_7789VN_190803_V01
Flash now

Erase region , wait ...
Write data , wait ...
Write : KEYTAK60A_M210_PCB01_gprs_MT6260_S00.M210_IJ_7789V N_190803_V01.bin
[ERROR] : DA_UART_RX_BUF_FULL
Flash Error!
Check Cable, Battery , try again

Operation Failed
Elapsed: 00:02:02
Reconnect Power/Cable!
Hi!
You flashed not correct fw, correct fw here!
In link fw .bin format flashing using CM2MTK.
  Reply With Quote
Old 08-09-2020, 13:08   #6 (permalink)
Crazy Poster
 
Join Date: Feb 2018
Location: Sheikhupura Pakistan
Posts: 57
Member: 2812460
Status: Offline
Thanks Meter: 11
Quote:
Originally Posted by ddilshod93 View Post
Hi!
You flashed not correct fw, correct fw here!
In link fw .bin format flashing using CM2MTK.
flashed my mobile flashing done but mobile not switching on.. Plz share any other file.
  Reply With Quote
Old 08-09-2020, 13:53   #7 (permalink)
Crazy Poster
 
Join Date: Feb 2018
Location: Sheikhupura Pakistan
Posts: 57
Member: 2812460
Status: Offline
Thanks Meter: 11
Load File
File_Info : MXWD012_D_HL_M258S_QMOBILE_PCB01_gprs_MT6261_S00.Q MOBILE_N222_V07_09_01_2017.bin
FileVersion : QMobile_N222_V07_09_01_2017
Load File Ok

Operation : Flash [ v1.58 ]

======= Flash
Files set for flashing :
[ MCU ] : MXWD012_D_HL_M258S_QMOBILE_PCB01_gprs_MT6261_S00.Q MOBILE_N222_V07_09_01_2017.bin

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Device boot not done
Check Drivers
Try again

Boot Error!

Operation Failed
Elapsed: 00:00:40
Reconnect Power/Cable!


Operation : Flash [ v1.58 ]

======= Flash
Files set for flashing :
[ MCU ] : MXWD012_D_HL_M258S_QMOBILE_PCB01_gprs_MT6261_S00.Q MOBILE_N222_V07_09_01_2017.bin

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 53 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : F8A8237842B99B06641767A50B7DDF02
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C200 2500 3800 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EF , [MXIC] MX25U12835FZNI_10G
[0] : FLASH_DIE : 00C2 0025 0038 0000
[0] : FLASH_LEN : 0x01000000
SDS_INFO : 0x00FFE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000

File_Info : MXWD012_D_HL_M258S_QMOBILE_PCB01_gprs_MT6261_S00.Q MOBILE_N222_V07_09_01_2017.bin
FileVersion : QMobile_N222_V07_09_01_2017
Flash now

Erase region , wait ...
Write data , wait ...
Write : MXWD012_D_HL_M258S_QMOBILE_PCB01_gprs_MT6261_S00.Q MOBILE_N222_V07_09_01_2017.bin

Done!
Elapsed: 00:01:10
Reconnect Power/Cable!


Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 53 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : F8A8237842B99B06641767A50B7DDF02
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C200 2500 3800 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EF , [MXIC] MX25U12835FZNI_10G
[0] : FLASH_DIE : 00C2 0025 0038 0000
[0] : FLASH_LEN : 0x01000000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000

Backup done
Executing FFS FORMAT now...
FAT_RANGE : 0x00393000-0x003FDFFF , LEN : 0x0006B000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE

Done!
Elapsed: 00:00:20
Reconnect Power/Cable!
STILL NOT POWERING ON PLZ SHARE FILE
  Reply With Quote
Old 08-09-2020, 15:09   #8 (permalink)
Junior Member
 
Join Date: Mar 2016
Location: Faisalabad
Posts: 22
Member: 2546130
Status: Offline
Thanks Meter: 6
Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 5 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : E6EC6363763EF3080A62709DE7533A3A
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C200 2500 3800 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EF , [MXIC] MX25U12835FZNI_10G
[0] : FLASH_DIE : 00C2 0025 0038 0000
[0] : FLASH_LEN : 0x01000000
SDS_INFO : 0x00FFE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000

File_Info : KEYTAK60A_M210_PCB01_gprs_MT6260_S00.M210_IJ_7789V N_190803_V01.bin
FileVersion : M210_IJ_7789VN_190803_V01

Done!
Elapsed: 00:00:10
Reconnect Power/Cable!


Operation : Read UserCode [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 5 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : E6EC6363763EF3080A62709DE7533A3A
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C200 2500 3800 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EF , [MXIC] MX25U12835FZNI_10G
[0] : FLASH_DIE : 00C2 0025 0038 0000
[0] : FLASH_LEN : 0x01000000
SDS_INFO : 0x00FFE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000

Read ExtData
Sorting ExtData
Reading UserCode

Active : No , Code : 12345

PLock|MobTrack : Not active

Done!
Elapsed: 00:00:13
Reconnect Power/Cable!


Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 5 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : E6EC6363763EF3080A62709DE7533A3A
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C200 2500 3800 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EF , [MXIC] MX25U12835FZNI_10G
[0] : FLASH_DIE : 00C2 0025 0038 0000
[0] : FLASH_LEN : 0x01000000
SDS_INFO : 0x00FFE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000
Reading Flash Content now ...



Read Flash now
Read Ok , 16777216 bytes read
Check and collect compile info
File_Info : KEYTAK60A_M210_PCB01_gprs_MT6260_S00.M210_IJ_7789V N_190803_V01.bin
FileVersion : M210_IJ_7789VN_190803_V01
Saved to : C:\InfinityBox\CM2MTK\Read_out\KEYTAK60A_M210_PCB0 1_gprs_MT6260_S00.M210_IJ_7789VN_190803_V01.bin

Done!
Elapsed: 00:00:57
Reconnect Power/Cable!


Flash File Link :- https://mega.nz/file/aJJwlSrZ#34cBYx...rM8HjcRXOGdcq0
  Reply With Quote
Old 08-11-2020, 16:15   #9 (permalink)
Crazy Poster
 
Join Date: Feb 2018
Location: Sheikhupura Pakistan
Posts: 57
Member: 2812460
Status: Offline
Thanks Meter: 11
Quote:
Originally Posted by Sheraz_Ahmad70 View Post
Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 5 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : E6EC6363763EF3080A62709DE7533A3A
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C200 2500 3800 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EF , [MXIC] MX25U12835FZNI_10G
[0] : FLASH_DIE : 00C2 0025 0038 0000
[0] : FLASH_LEN : 0x01000000
SDS_INFO : 0x00FFE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000

File_Info : KEYTAK60A_M210_PCB01_gprs_MT6260_S00.M210_IJ_7789V N_190803_V01.bin
FileVersion : M210_IJ_7789VN_190803_V01

Done!
Elapsed: 00:00:10
Reconnect Power/Cable!


Operation : Read UserCode [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 5 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : E6EC6363763EF3080A62709DE7533A3A
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C200 2500 3800 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EF , [MXIC] MX25U12835FZNI_10G
[0] : FLASH_DIE : 00C2 0025 0038 0000
[0] : FLASH_LEN : 0x01000000
SDS_INFO : 0x00FFE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000

Read ExtData
Sorting ExtData
Reading UserCode

Active : No , Code : 12345

PLock|MobTrack : Not active

Done!
Elapsed: 00:00:13
Reconnect Power/Cable!


Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 5 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : E6EC6363763EF3080A62709DE7533A3A
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C200 2500 3800 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EF , [MXIC] MX25U12835FZNI_10G
[0] : FLASH_DIE : 00C2 0025 0038 0000
[0] : FLASH_LEN : 0x01000000
SDS_INFO : 0x00FFE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000
Reading Flash Content now ...



Read Flash now
Read Ok , 16777216 bytes read
Check and collect compile info
File_Info : KEYTAK60A_M210_PCB01_gprs_MT6260_S00.M210_IJ_7789V N_190803_V01.bin
FileVersion : M210_IJ_7789VN_190803_V01
Saved to : C:\InfinityBox\CM2MTK\Read_out\KEYTAK60A_M210_PCB0 1_gprs_MT6260_S00.M210_IJ_7789VN_190803_V01.bin

Done!
Elapsed: 00:00:57
Reconnect Power/Cable!


Flash File Link :- https://mega.nz/file/aJJwlSrZ#34cBYx...rM8HjcRXOGdcq0




Card found : S/N : 1DEDBB41 , v0137
Chinese Miracle II [MTK module] v 1.58

Load File
File_Info : KEYTAK60A_M210_PCB01_gprs_MT6260_S00.M210_IJ_7789V N_190803_V01.bin
FileVersion : M210_IJ_7789VN_190803_V01
Load File Ok

Operation : Flash [ v1.58 ]

======= Flash
Files set for flashing :
[ MCU ] : KEYTAK60A_M210_PCB01_gprs_MT6260_S00.M210_IJ_7789V N_190803_V01.bin

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 53 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : F8A8237842B99B06641767A50B7DDF02
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C200 2500 3800 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
SOC_VERIFY : 0xC1
BOOT_STYLE : DONE
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EF , [MXIC] MX25U12835FZNI_10G
[0] : FLASH_DIE : 00C2 0025 0038 0000
[0] : FLASH_LEN : 0x01000000
[ERROR] : DA_BLANK_FLASH
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000

File_Info : KEYTAK60A_M210_PCB01_gprs_MT6260_S00.M210_IJ_7789V N_190803_V01.bin
FileVersion : M210_IJ_7789VN_190803_V01
Flash now

Erase region , wait ...
Write data , wait ...
Write : KEYTAK60A_M210_PCB01_gprs_MT6260_S00.M210_IJ_7789V N_190803_V01.bin
[ERROR] : DA_UART_RX_BUF_FULL
Flash Error!
Check Cable, Battery , try again

Operation Failed
Elapsed: 00:03:17
Reconnect Power/Cable!


Not working Plz someone share working file
  Reply With Quote
Old 09-26-2020, 12:48   #10 (permalink)
Insane Poster
 
Join Date: Jul 2018
Location: PAKISTAN
Posts: 62
Member: 2852499
Status: Offline
Sonork: 100.1658424
Thanks Meter: 32
check this i done this with tested file

https://ibb.co/MPmTCHS

after write My backup file Phone Work perfect

https://ibb.co/1vsKh7Z


Dead Recover Flash file link 100% tested >>

https://mega.nz/file/OnwCTTxD#et64ag...YADo7QAF7FaETk
  Reply With Quote
Old 09-26-2020, 14:49   #11 (permalink)
Junior Member
 
Join Date: Sep 2020
Location: Thailand
Posts: 29
Member: 2967973
Status: Offline
Sonork: diamond2020
Thanks Meter: 2
I need nokia c1 TA-1165 rom pac file
Who can share it for me?
  Reply With Quote
Old 09-27-2020, 15:05   #12 (permalink)
Freak Poster
 
rsa7262's Avatar
 
Join Date: Oct 2015
Location: eArTh
Posts: 268
Member: 2470191
Status: Offline
Sonork: 100.1652036
Thanks Meter: 307
Donate money to this user
Quote:
Originally Posted by citymobile2020 View Post
check this i done this with tested file

https://ibb.co/MPmTCHS

after write My backup file Phone Work perfect

https://ibb.co/1vsKh7Z


Dead Recover Flash file link 100% tested >>

https://mega.nz/file/OnwCTTxD#et64ag...YADo7QAF7FaETk
Plz dont Share Password Protect files here...
  Reply With Quote
Old 09-27-2020, 15:11   #13 (permalink)
Junior Member
 
Join Date: Jan 2015
Location: Tanzania
Posts: 19
Member: 2328361
Status: Offline
Sonork: 100-1624119
Thanks Meter: 2
i have nokia 800 tough locked with user code (password) how to solve it
  Reply With Quote
Old 11-19-2020, 13:54   #14 (permalink)
Freak Poster
 
haadimobiles's Avatar
 
Join Date: Aug 2014
Location: Pakistan
Posts: 105
Member: 2241683
Status: Offline
Thanks Meter: 11
Quote:
Originally Posted by citymobile2020 View Post
check this i done this with tested file

https://ibb.co/MPmTCHS

after write My backup file Phone Work perfect

https://ibb.co/1vsKh7Z


Dead Recover Flash file link 100% tested >>

https://mega.nz/file/OnwCTTxD#et64ag...YADo7QAF7FaETk
Here you go
another PAKISTANI Mind on his peek...
no offence I'm also Pakistani....
  Reply With Quote
Old 12-05-2020, 10:51   #15 (permalink)
Insane Poster
 
Join Date: Dec 2010
Location: Pakistan
Posts: 64
Member: 1472098
Status: Offline
Thanks Meter: 26
Nokia 210 TA-1139 CLONE MT6260

Start at : [12/5/2020 / 12:07:36 PM]
Operation : Flash [ v1.58 ]

======= Flash
Files set for flashing :
[ MCU ] : J021_4_60A_BT_11B_PCB01_GPRS_MT6260_S00.J021_4_60A _11B_240X320.BIN.bin

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 4 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : E90F12C6AD0294A0F78D587D5DFF50D0
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : 2C00 CB00 1800 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EE , [Numonyx] N25W128
[0] : FLASH_DIE : 002C 00CB 0018 0000
[0] : FLASH_LEN : 0x01000000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000

File_Info : J021_4_60A_BT_11B_PCB01_gprs_MT6260_S00.J021_4_60A _11B_240X320.bin
FileVersion : J021_4_60A_11B_240X320
Flash now

Erase region , wait ...
Write data , wait ...
Write : J021_4_60A_BT_11B_PCB01_GPRS_MT6260_S00.J021_4_60A _11B_240X320.BIN.bin

Done!
Elapsed: 00:03:52
Reconnect Power/Cable!

Finish at : [12/5/2020 / 12:11:28 PM]

FileVersion : J021_4_60A_11B_240X320

Firmware Link Without Password::

https://mega.nz/file/3p8G3aLJ#4M3vBT...h_c6-aNGssJ2hg
  Reply With Quote
The Following User Says Thank You to fonelab1o1 For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 09:12.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.30009 seconds with 8 queries

SEO by vBSEO