Opp F1s pattran Locked - GSM-Forum

khanzada606 · 02-26-2017, 10:11

Card found : S/N : 29BC6477 , v0135
Chinese Miracle II [MTK module] v 1.58

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Device boot not done
Check Drivers
Try again

Boot Error!

Operation Failed
Elapsed: 00:00:16
Reconnect Power/Cable!

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : BROM

[DA_ERROR] : DRAM Configure failed!
ErroCode : 0x2122
EMICFG_NOT_ACCEPTED_CONFIG
Boot Error!

Operation Failed
Elapsed: 00:00:28
Reconnect Power/Cable!

appsworlmardan · 02-26-2017, 10:34

Try with custom ROM may work for you
Other wise mmc problem

khanzada606 · 02-26-2017, 10:47

EMMC Problem Huh?
Phone Is Okay , only pattran on Screen

appsworlmardan · 02-26-2017, 10:49

Try to hard reset
Or TWRP

Sent from my XT1058 using Tapatalk

farsi_007 · 02-26-2017, 10:54

Quote:

Originally Posted by khanzada606

Card found : S/N : 29BC6477 , v0135
Chinese Miracle II [MTK module] v 1.58

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Device boot not done
Check Drivers
Try again

Boot Error!

Operation Failed
Elapsed: 00:00:16
Reconnect Power/Cable!

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : BROM

[DA_ERROR] : DRAM Configure failed!
ErroCode : 0x2122
EMICFG_NOT_ACCEPTED_CONFIG
Boot Error!

Operation Failed
Elapsed: 00:00:28
Reconnect Power/Cable!

Bro try alternately with:
vol- key and insert cable
vol+ key and insert cable
and without battery also
WBR

moh032 · 02-26-2017, 11:53

WHY NO ONE USES SEARCH BUTTON!!!
hi , this model is already FULLY SUPPORTED
1.download firmware ( any version)
2.select it in flasher tab .
3.do any needed operations

khanzada606 · 02-27-2017, 10:43

there are 3 Different Versions OPPo F1s
Not Compatible With Each Other.
Only one of Them Supported By CM2 So Far Which has 2 GB of RAM
3 GB & 4 GB RAM Versions Not Supported BY CM2 Or Any Third Party Tool
Glad To See Team is Busy On Samsung & LG module & No update For MTK

lahdache · 02-27-2017, 11:21

Quote:

[DA_ERROR] : DRAM Configure failed!

boot not supported .

try whith edl cable.

using qualcomm tool ( full factory reset )

pintu mangaraj · 02-27-2017, 12:34

Quote:

Originally Posted by lahdache

boot not supported .

try whith edl cable.

using qualcomm tool ( full factory reset )

fro mtk, you are saying to use the edl cable..
Plese do explain more.

khanzada606 · 02-27-2017, 21:22

Its aint Qcom phone EDL cable
Its MT6755

Sent from my SM-G570F using Tapatalk

bilalhabshe · 02-28-2017, 07:28

after flash oppo 1601 f1s just on vibrate any solution plzzzz help me

Shubhanshu~ · 02-28-2017, 08:29

3GB Ram Version Tested to be Supported

In Logs It Shows 2 Gb in Phone it shows 3GB.

Code:

Operation : Read Pattern/DP Lock [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 10 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer   : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : BROM
DRAM configured from IDB!
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , 2a4GB
[eMMC] : FLASH_CID : 90014A484247346132A423D4B81C638F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID    : 0x600921FC2983C22709D061DAACB9EFC4
INT RAM    : 0x00000000
EXT RAM    : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : FULL-SPEED
Boot Ok!

USBDL : Init HSUSB Ok
Reading data ... 

Get Locks ...
PatternLock Sequnce : 12587

Done!
Elapsed: 00:00:30
Reconnect Power/Cable!

Read Flash Supported

Code:

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 10 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer   : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : BROM
DRAM configured from IDB!
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , 2a4GB
[eMMC] : FLASH_CID : 90014A484247346132A423D4B81C638F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID    : 0x600921FC2983C22709D061DAACB9EFC4
INT RAM    : 0x00000000
EXT RAM    : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : FULL-SPEED
Boot Ok!

Reading Flash Content now ... 
USBDL : Init HSUSB Ok!

xGPT : Normalize settings Ok!

Brand     : OPPO
ProdName  : A1601
ProdModel : A1601
Device    : A1601
AndroidVer: 5.1
MTKxCPU   : MT6755
MTKxPRJ   : A1601EX_11_A.27_170111

[Read Ok] : preloader_oppo6750_15131.bin
[Read Ok] : recovery.img
[Read Ok] : md1img.img
[Read Ok] : md1dsp.img
[Read Ok] : md1arm7.img
[Read Ok] : lk.bin
[Read Ok] : lk2.bin
[Read Ok] : boot.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6755 / V1.1.2 / oppo6750_15131 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3259 MiB
Scatter saved to : E:\Oppo\A1601 F1S\MT6755__OPPO__A1601__A1601__5.1__A1601EX_11_A.27_170111\

All done!

Done!
Elapsed: 00:05:57
Reconnect Power/Cable!

BR

alex_030385 · 03-01-2017, 08:35

for me error
Card found : S/N : , v0135
Chinese Miracle II [MTK module] v 1.58

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 311 ]
Sync...
Brom Init not done
Boot Error!

Operation Failed
Elapsed: 00:00:05
Reconnect Power/Cable!

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 311 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : BROM

[DA_ERROR] : DRAM Configure failed!
ErroCode : 0x2122
EMICFG_NOT_ACCEPTED_CONFIG
Boot Error!

Operation Failed
Elapsed: 00:00:13
Reconnect Power/Cable!

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 311 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : BROM

[DA_ERROR] : DRAM Configure failed!
ErroCode : 0x2122
EMICFG_NOT_ACCEPTED_CONFIG
Boot Error!

Operation Failed
Elapsed: 00:00:13
Reconnect Power/Cable!

amancommunicati · 03-01-2017, 08:48

OPPO F1S A1601 MTK6755 V5.1 Flash File - GsmSociety

Oppo 1601 F1s Dead & Only Vibrate Recovery File - GsmSociety

10000000000000000000000000000000% working file i m chq this file

kothamamun · 03-01-2017, 08:49

change cable or try without battery

02-26-2017, 10:11	#1 (permalink)
khanzada606 No Life Poster Join Date: Sep 2015 Location: Earth Posts: 2,156 Member: 2455344 Status: Offline Sonork: Ask me Thanks Meter: 420	Opp F1s pattran Locked Card found : S/N : 29BC6477 , v0135 Chinese Miracle II [MTK module] v 1.58 Operation : Check / Read Info [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Device boot not done Check Drivers Try again Boot Error! Operation Failed Elapsed: 00:00:16 Reconnect Power/Cable! Operation : Read Flash [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 15 ] Sync... Inital Boot Ok! BB_CPU_PID : 6755 BB_CPU_NME : [MediaTek] Helio[P10]\|MT6755_S00 BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x01000000 BromVer : 0x0005 BLVersion : 0x00FE PreLoader : NOT Active [ Erased ] BootLdrSS : SIGNED with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... DAgent configured successfully Connection agent : BROM [DA_ERROR] : DRAM Configure failed! ErroCode : 0x2122 EMICFG_NOT_ACCEPTED_CONFIG Boot Error! Operation Failed Elapsed: 00:00:28 Reconnect Power/Cable!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-26-2017, 10:34	#2 (permalink)
appsworlmardan No Life Poster Join Date: Oct 2013 Location: MajeedGsm Posts: 578 Member: 2046498 Status: Offline Sonork: 100.1676751 Thanks Meter: 162	Try with custom ROM may work for you Other wise mmc problem

02-26-2017, 10:47	#3 (permalink)
khanzada606 No Life Poster Join Date: Sep 2015 Location: Earth Posts: 2,156 Member: 2455344 Status: Offline Sonork: Ask me Thanks Meter: 420	EMMC Problem Huh? Phone Is Okay , only pattran on Screen

02-26-2017, 10:49	#4 (permalink)
appsworlmardan No Life Poster Join Date: Oct 2013 Location: MajeedGsm Posts: 578 Member: 2046498 Status: Offline Sonork: 100.1676751 Thanks Meter: 162	Try to hard reset Or TWRP Sent from my XT1058 using Tapatalk

02-26-2017, 11:53	#6 (permalink)
moh032 Freak Poster Join Date: Jul 2008 Posts: 353 Member: 804466 Status: Offline Thanks Meter: 27	WHY NO ONE USES SEARCH BUTTON!!! hi , this model is already FULLY SUPPORTED 1.download firmware ( any version) 2.select it in flasher tab . 3.do any needed operations

02-27-2017, 10:43	#7 (permalink)
khanzada606 No Life Poster Join Date: Sep 2015 Location: Earth Posts: 2,156 Member: 2455344 Status: Offline Sonork: Ask me Thanks Meter: 420	there are 3 Different Versions OPPo F1s Not Compatible With Each Other. Only one of Them Supported By CM2 So Far Which has 2 GB of RAM 3 GB & 4 GB RAM Versions Not Supported BY CM2 Or Any Third Party Tool Glad To See Team is Busy On Samsung & LG module & No update For MTK

02-27-2017, 21:22	#10 (permalink)
khanzada606 No Life Poster Join Date: Sep 2015 Location: Earth Posts: 2,156 Member: 2455344 Status: Offline Sonork: Ask me Thanks Meter: 420	Its aint Qcom phone EDL cable Its MT6755 Sent from my SM-G570F using Tapatalk

02-28-2017, 07:28	#11 (permalink)
bilalhabshe Freak Poster Join Date: Apr 2011 Location: pakistan Posts: 108 Member: 1565288 Status: Offline Thanks Meter: 5	after flash oppo 1601 f1s just on vibrate any solution plzzzz help me

03-01-2017, 08:35	#13 (permalink)
alex_030385 No Life Poster Join Date: Oct 2008 Age: 39 Posts: 1,478 Member: 875541 Status: Offline Sonork: 100.1604468 Thanks Meter: 327	for me error Card found : S/N : , v0135 Chinese Miracle II [MTK module] v 1.58 Operation : Read Flash [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 311 ] Sync... Brom Init not done Boot Error! Operation Failed Elapsed: 00:00:05 Reconnect Power/Cable! Operation : Read Flash [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 311 ] Sync... Inital Boot Ok! BB_CPU_PID : 6755 BB_CPU_NME : [MediaTek] Helio[P10]\|MT6755_S00 BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x01000000 BromVer : 0x0005 BLVersion : 0x00FE PreLoader : NOT Active [ Erased ] BootLdrSS : SIGNED with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... DAgent configured successfully Connection agent : BROM [DA_ERROR] : DRAM Configure failed! ErroCode : 0x2122 EMICFG_NOT_ACCEPTED_CONFIG Boot Error! Operation Failed Elapsed: 00:00:13 Reconnect Power/Cable! Operation : Read Flash [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 311 ] Sync... Inital Boot Ok! BB_CPU_PID : 6755 BB_CPU_NME : [MediaTek] Helio[P10]\|MT6755_S00 BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x01000000 BromVer : 0x0005 BLVersion : 0x00FE PreLoader : NOT Active [ Erased ] BootLdrSS : SIGNED with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... DAgent configured successfully Connection agent : BROM [DA_ERROR] : DRAM Configure failed! ErroCode : 0x2122 EMICFG_NOT_ACCEPTED_CONFIG Boot Error! Operation Failed Elapsed: 00:00:13 Reconnect Power/Cable!

03-01-2017, 08:48	#14 (permalink)
amancommunicati No Life Poster Join Date: Feb 2008 Location: budaun Age: 38 Posts: 935 Member: 702572 Status: Offline Sonork: 9837200009 Thanks Meter: 74	OPPO F1S A1601 MTK6755 V5.1 Flash File - GsmSociety Oppo 1601 F1s Dead & Only Vibrate Recovery File - GsmSociety 10000000000000000000000000000000% working file i m chq this file

03-01-2017, 08:49	#15 (permalink)
kothamamun No Life Poster Join Date: Apr 2016 Location: B A N G L A D E S H Posts: 3,186 Member: 2556542 Status: Offline Thanks Meter: 1,788	change cable or try without battery