Oppo A5s CPH1909 Full Report :) - Page 2 - GSM-Forum

InfinityHelp · 01-25-2021, 16:52

Quote:

Originally Posted by Mudasir Ali

i cant find mtk 2.18 on support and base 2044

plz share a5s in hand

Infinity CM2MT2 v2.18 should be available at support in a short time

Vincelfixer · 01-28-2021, 06:57

Quote:

Originally Posted by kamal_singla

Identify

Code:

Operation : Identify [ v2.18 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1633 (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN RAPHAEL
BROM : MEID : 0857FC03F9F676297CC06144C133B0C5
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : 87B802E06214D8B83B161D1A58EF5D40A9C0DFC384B6DFB15AB3F624D2790AF3
BROM : SLA : Local Auth 
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : INFINITY
     EMI : SRC : PRELOADER_INFINITY_0
     EMI : CNT : 0003
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 150100514436334D4203E537C6A8168F
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QD63MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 94821208740527DBEE4A7426913C5198

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : O11019
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2020-10-05
Product Manfct : OPPO
Build Time     : 20.10.2020
Product Brand  : OPPO
Product Model  : CPH1909
Product Info   : CPH1909
Product Device : CPH1909
Product Name   : CPH1909
SW OTA Version : CPH1909EX_11.A.42_0420_202010202115
Display ID     : CPH1909EX_11_A.42
Kernel Info    : 4.9.77

USERDATA : FILESYSTEM : EXT4  with FDE ( Full Disk Encryption *)

NVRAM check : Passed!
NVRAM : SEC ENCRYPT [ IMEI ENCRYPTED ]

STORAGE : LifeStatus : eMMC : OK!

Read Firmware

Code:

Operation : Read Firmware [ v2.18 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1633 (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN RAPHAEL
BROM : MEID : 0857FC03F9F676297CC06144C133B0C5
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : 87B802E06214D8B83B161D1A58EF5D40A9C0DFC384B6DFB15AB3F624D2790AF3
BROM : SLA : Local Auth 
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : INFINITY
     EMI : SRC : PRELOADER_INFINITY_0
     EMI : CNT : 0003
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 150100514436334D4203E537C6A8168F
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QD63MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 94821208740527DBEE4A7426913C5198

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : O11019
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2020-10-05
Product Manfct : OPPO
Build Time     : 20.10.2020
Product Brand  : OPPO
Product Model  : CPH1909
Product Info   : CPH1909
Product Device : CPH1909
Product Name   : CPH1909
SW OTA Version : CPH1909EX_11.A.42_0420_202010202115
Display ID     : CPH1909EX_11_A.42
Kernel Info    : 4.9.77

MT6765__OPPO__CPH1909__8.1.0__CPH1909EX_11_A.42__O11019__CPH1909

Read : preloader.bin
Read : recovery.img
Read : opporeserve.img
Read : oppo_custom.img
Read : persist.img
ExtSparse : Compression ratio : 82%
Read : proinfo.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : tinysys-sspm.bin
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : odmdtbo.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 35%
Read : system.img
ExtSparse : Compression ratio : 20%
Read : cache.img
Read : userdata.img

FW Size  : 4.43 GB
Android Info saved : _Android_info.txt
Scatter  : MT6765_Android_scatter.txt
Saved to : C:\Users\kamal\Desktop\MT6765__OPPO__CPH1909__8.1.0__CPH1909EX_11_A.42__O11019__CPH1909\

Done!
Elapsed: 00.06.37

Smart Reset

Code:

Operation : Reset Settings/Format FS [ v2.18 ]
Mode : SMART RESET
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1633 (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN RAPHAEL
BROM : MEID : 0857FC03F9F676297CC06144C133B0C5
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : 87B802E06214D8B83B161D1A58EF5D40A9C0DFC384B6DFB15AB3F624D2790AF3
BROM : SLA : Local Auth 
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : INFINITY
     EMI : SRC : PRELOADER_INFINITY_0
     EMI : CNT : 0003
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 150100514436334D4203E537C6A8168F
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QD63MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 94821208740527DBEE4A7426913C5198

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x805757

Format Ok : USERDATA
Format Ok : CACHE
Format Ok : RESET PROTECTION
Format Ok : USERDATA

Done!
Elapsed: 00.00.35

Reconnect Power/Cable!

Write Factory Firmware

Code:

Operation : Write Flash [ v2.18 ]

Repartition   : Enabled
Flash Verify  : Enabled
Reg.Pre-Erase : Enabled
Verify HW/SW  : Enabled
SData Backup  : Disabled
Safe UserData : Disabled
Flash Format  : Disabled

Files :21
[FL] : Set : preloader_oppo6765_18511.bin
[FL] : Set : recovery.img
[FL] : Set : opporeserve2.img
[FL] : Set : md1img.img
[FL] : Set : spmfw.img
[FL] : Set : scp.img
[FL] : Set : scp.img
[FL] : Set : sspm.img
[FL] : Set : sspm.img
[FL] : Set : lk.img
[FL] : Set : lk.img
[FL] : Set : boot.img
[FL] : Set : logo.bin
[FL] : Set : odmdtbo.img
[FL] : Set : tee.img
[FL] : Set : tee.img
[FL] : Set : odm.img
[FL] : Set : vendor.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0x23CC6D6C0 [ 8.95 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1633 (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN RAPHAEL
BROM : MEID : 0857FC03F9F676297CC06144C133B0C5
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : 87B802E06214D8B83B161D1A58EF5D40A9C0DFC384B6DFB15AB3F624D2790AF3
BROM : SLA : Local Auth 
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : MT6765
     EMI : SRC : preloader_oppo6765_18511.bin
     EMI : CNT : 0009
 EMI : [00] : eMMC : DDR3 : ID : 150100514536334D42 : VEN : SAMSUNG   | DEV : QE63MB : RAM : [ 2.00 GB ]
 EMI : [01] : eMMC : DDR3 : ID : 90014A484147346132 : VEN : HYNIX     | DEV : HAG4a2 : RAM : [ 2.00 GB ]
 EMI : [02] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 3.00 GB ]
 EMI : [03] : eMMC : DDR3 : ID : 150100474436424D42 : VEN : SAMSUNG   | DEV : GD6BMB : RAM : [ 3.00 GB ]
 EMI : [04] : eMMC : DDR3 : ID : 150100524436344D42 : VEN : SAMSUNG   | DEV : RD64MB : RAM : [ 4.00 GB ]
 EMI : [05] : eMMC : DDR3 : ID : 90014A484347386134 : VEN : HYNIX     | DEV : HCG8a4 : RAM : [ 4.00 GB ]
 EMI : [06] : eMMC : DDR3 : ID : 150100475036424D42 : VEN : SAMSUNG   | DEV : GP6BMB : RAM : [ 3.00 GB ]
 EMI : [07] : eMMC : DDR3 : ID : 150100524836344142 : VEN : SAMSUNG   | DEV : RH64AB : RAM : [ 4.00 GB ]
 EMI : [08] : eMMC : DDR3 : ID : 150100514436334D42 : VEN : SAMSUNG   | DEV : QD63MB : RAM : [ 2.00 GB ]
     EMI : Init EMI from PRELOADER
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 150100514436334D4203E537C6A8168F
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QD63MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 94821208740527DBEE4A7426913C5198

DA : USB : HIGH-SPEED

Boot done!

[FL] : HW verification passed!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : Pre-Erase 
Erase : 0x0000000000000000 : 0x0000000004188000
Erase : 0x0000000008A88000 : 0x0000000001500000
Erase : 0x000000000BF88000 : 0x0000000006000000
Erase : 0x0000000013000000 : 0x0000000000800000
Erase : 0x0000000016800000 : 0x0000000000200000
Erase : 0x0000000016D00000 : 0x0000000009300000
Erase : 0x0000000024000000 : 0x0000000386800000

[FL] : RePartition 
[FL] : RePartition Ok!


[FL] : Flashing now ... 

Write : PRELOADER
Update bootloader backup copy ... 
Update bootloader backup copy Ok!
Write : RECOVERY
Write : OPPORESERVE2
FAIL : SEC : IMG TYPE MISMATCH
Write : MD1IMG
Write : SPMFW
Write : SCP1
Write : SCP2
Write : SSPM_1
Write : SSPM_2
Write : LK
Write : LK2
Write : BOOT
Write : LOGO
Write : ODMDTBO
Write : TEE1
Write : TEE2
Write : ODM
Write : VENDOR
Write : SYSTEM
Write : CACHE
Write : USERDATA

Ultra : Ok!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : RePartition 
[FL] : RePartition Ok!

[FL] : Flashing finished!

Done!
Elapsed: 00.05.28

Reconnect Power/Cable!

HW Report

Code:

Operation : HW Report [ v2.18 ]
HWreport : Mode : eMMC
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1633 (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN RAPHAEL
BROM : MEID : 0857FC03F9F676297CC06144C133B0C5
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : 87B802E06214D8B83B161D1A58EF5D40A9C0DFC384B6DFB15AB3F624D2790AF3
BROM : SLA : Local Auth 
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : MT6765
     EMI : SRC : preloader_oppo6765_18511.bin
     EMI : CNT : 0009
 EMI : [00] : eMMC : DDR3 : ID : 150100514536334D42 : VEN : SAMSUNG   | DEV : QE63MB : RAM : [ 2.00 GB ]
 EMI : [01] : eMMC : DDR3 : ID : 90014A484147346132 : VEN : HYNIX     | DEV : HAG4a2 : RAM : [ 2.00 GB ]
 EMI : [02] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 3.00 GB ]
 EMI : [03] : eMMC : DDR3 : ID : 150100474436424D42 : VEN : SAMSUNG   | DEV : GD6BMB : RAM : [ 3.00 GB ]
 EMI : [04] : eMMC : DDR3 : ID : 150100524436344D42 : VEN : SAMSUNG   | DEV : RD64MB : RAM : [ 4.00 GB ]
 EMI : [05] : eMMC : DDR3 : ID : 90014A484347386134 : VEN : HYNIX     | DEV : HCG8a4 : RAM : [ 4.00 GB ]
 EMI : [06] : eMMC : DDR3 : ID : 150100475036424D42 : VEN : SAMSUNG   | DEV : GP6BMB : RAM : [ 3.00 GB ]
 EMI : [07] : eMMC : DDR3 : ID : 150100524836344142 : VEN : SAMSUNG   | DEV : RH64AB : RAM : [ 4.00 GB ]
 EMI : [08] : eMMC : DDR3 : ID : 150100514436334D42 : VEN : SAMSUNG   | DEV : QD63MB : RAM : [ 2.00 GB ]
     EMI : Init EMI from PRELOADER
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 150100514436334D4203E537C6A8168F
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QD63MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 94821208740527DBEE4A7426913C5198

DA : USB : HIGH-SPEED

Boot done!

Memory Info : 
    CID : 150100514436334D4203E537C6A8168F
    MEM : VEN : SAMSUNG | OEM : 01 | DEV : QD63MB
    DAT :  Size: 29820 MB, Max.Speed: 52000 kHz, blklen(512), nblks(61071360), ro(0)

EXT_CSD Info : 
EXT_CSD rev.		 : v1.8 ( MMC v5.1 )
     CSD struct rev.		 : v1.2
     Supported command sets	 : 1h
     HPI features		 : 1h
     BG operations support	 : 1h
     BG operations status	 : 0h
     Correct prg. sectors	 : 0h
     1st init time after part. : 3000 ms
     Min. write perf.(DDR,52MH,8b): 0h
     Min. read perf. (DDR,52MH,8b): 0h
     TRIM timeout: 0 ms
     Secure feature support: 55h
     Secure erase timeout  : 8100 ms
     Secure trim timeout   : 5100 ms
     Access size	     : 3584 bytes
     HC erase unit size    : 512 kbytes
     HC erase timeout      : 300 ms
     HC write prot grp size: 8192 kbytes
     HC erase grp def.     : 0h
     Reliable write sect count: 1h
     Sleep current (VCC) : 7h
     Sleep current (VCCQ): 7h
     Sleep/awake timeout : 26214400 ns
     Sector count : 3a3e000h
     Min. WR Perf.  (52MH,8b): 0h
     Min. Read Perf.(52MH,8b): 0h
     Min. WR Perf.  (26MH,8b,52MH,4b): 0h
     Min. Read Perf.(26MH,8b,52MH,4b): 0h
     Min. WR Perf.  (26MH,4b): 0h
     Min. Read Perf.(26MH,4b): 0h
     Power class: 0
     Power class(DDR,52MH,3.6V): 0h
     Power class(DDR,52MH,1.9V): 0h
     Power class(26MH,3.6V)	 : 0h
     Power class(52MH,3.6V)	 : 0h
     Power class(26MH,1.9V)	 : 0h
     Power class(52MH,1.9V)	 : 0h
     Part. switch timing    : 2h
     Out-of-INTR busy timing: ah
     Card type       : 57h
     Command set     : 0h
     Command set rev.: 0h
     HS timing       : 0h
     Bus width       : 0h
     Erase memory content : 0h
     Partition config      : 48h
     Boot partition size   : 4096 kbytes
     Boot information      : 7h
     Boot config protection: 0h
     Boot bus width	     : 2h
     Boot area write prot  : 0h
     User area write prot  : 0h
     FW configuration      : 0h
     RPMB size : 16384 kbytes
     Write rel. setting  : 1fh
     Write rel. parameter: 14h
     Start background ops : 0h
     Enable background ops: 2h
     H/W reset function   : 1h
     HPI management	    : 0h
     Max. enhanced area size : 747h (15261696 kbytes)
     Part. support  : 7h
     Part. attribute: 0h
     Part. setting  : 0h
     General purpose 1 size : 0h (0 kbytes)
     General purpose 2 size : 0h (0 kbytes)
     General purpose 3 size : 0h (0 kbytes)
     General purpose 4 size : 0h (0 kbytes)
     Enh. user area size : 0h (0 kbytes)
     Enh. user area start: 0h
     Bad block mgmt mode: 0h

Overall status : 

    MLC status : 30% - 40% used
    SLC status : 30% - 40% used
    EOL status : Normal  ( Less than 80% reserved blocks used )


    RPMB : RPMB  KEY EXISTS!  [State : NOT CLEAN : UNUSABLE]


Done!
Elapsed: 00.00.20

can you please share firmware

kamal_singla · 01-28-2021, 07:13

uploading soon you can download from IOS

Arslanmayo · 01-28-2021, 13:52

Quote:

Originally Posted by kamal_singla

https://drive.google.com/file/d/1Kq2...ew?usp=sharing

factory firmware for CPH1909 A5s

bro i need this firmware and the link is not working

kamal_singla · 01-28-2021, 14:01

Quote:

Originally Posted by Arslanmayo

bro i need this firmware and the link is not working

soon you can download from IOS

Arslanmayo · 01-28-2021, 14:05

Quote:

Originally Posted by jong2

need firmware oppo a5s cm2

Operation : Identify [ v2.19 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM53)
MODE : BOOTROM
PORT : 53
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN RAPHAEL
BROM : MEID : 4C808A6CAFBE9BB02168F4FA9C76FBA9
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : 5C710942998C7BDC84FD654F76B44D77DFEDAEF2387E23D541 AB8A1C108DAD54
BROM : SLA : Local Auth

Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

Operation : HW Report [ v2.19 ]
HWreport : Mode : eMMC
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM53)
MODE : BOOTROM
PORT : 53
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN RAPHAEL
BROM : MEID : 4C808A6CAFBE9BB02168F4FA9C76FBA9
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : 5C710942998C7BDC84FD654F76B44D77DFEDAEF2387E23D541 AB8A1C108DAD54
BROM : SLA : Local Auth

Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

Info : LEGACY : HW reporting feature unavailable for current device!

Done!
Elapsed: 00:00:17

Arslanmayo · 01-28-2021, 14:06

im getting this error on oppo a5s cph 1909

Arslanmayo · 01-28-2021, 14:08

Operation : HW Report [ v2.19 ]
HWreport : Mode : eMMC
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM53)
MODE : BOOTROM
PORT : 53
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN RAPHAEL
BROM : MEID : 4C808A6CAFBE9BB02168F4FA9C76FBA9
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2012 | Manual : Disabled
BROM : SOCID : 5C710942998C7BDC84FD654F76B44D77DFEDAEF2387E23D541 AB8A1C108DAD54
BROM : SLA : Local Auth

Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

Info : LEGACY : HW reporting feature unavailable for current device!

Done!
Elapsed: 00:00:25

Arslanmayo · 01-28-2021, 14:08

Operation : HW Report [ v2.19 ]
HWreport : Mode : eMMC
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM53)
MODE : BOOTROM
PORT : 53
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN RAPHAEL
BROM : MEID : 4C808A6CAFBE9BB02168F4FA9C76FBA9
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2012 | Manual : Disabled
BROM : SOCID : 5C710942998C7BDC84FD654F76B44D77DFEDAEF2387E23D541 AB8A1C108DAD54
BROM : SLA : Local Auth

Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

Info : LEGACY : HW reporting feature unavailable for current device!

Done!
Elapsed: 00:00:25

Arslanmayo · 01-28-2021, 14:11

problem solved but need firmware bro urgent
Operation : Identify [ v2.19 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM53)
MODE : BOOTROM
PORT : 53
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN RAPHAEL
BROM : MEID : 4C808A6CAFBE9BB02168F4FA9C76FBA9
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : 5C710942998C7BDC84FD654F76B44D77DFEDAEF2387E23D541 AB8A1C108DAD54
BROM : SLA : Local Auth
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : PRELOADER_INFINITY_0
EMI : CNT : 0003
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 150100514436334D42037B687BFB60B
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QD63MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 2CB244FBC5D21F61E589BC724AC69AEA

DA : USB : HIGH-SPEED

Boot done!

Done!
Elapsed: 00:00:19

Reconnect Power/Cable!

Arslanmayo · 01-28-2021, 14:11

problem solved but need firmware bro urgent
Operation : Identify [ v2.19 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM53)
MODE : BOOTROM
PORT : 53
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN RAPHAEL
BROM : MEID : 4C808A6CAFBE9BB02168F4FA9C76FBA9
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : 5C710942998C7BDC84FD654F76B44D77DFEDAEF2387E23D541 AB8A1C108DAD54
BROM : SLA : Local Auth
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : PRELOADER_INFINITY_0
EMI : CNT : 0003
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 150100514436334D42037B687BFB60B
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QD63MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 2CB244FBC5D21F61E589BC724AC69AEA

DA : USB : HIGH-SPEED

Boot done!

Done!
Elapsed: 00:00:19

Reconnect Power/Cable!

JayDi · 01-28-2021, 14:12

Quote:

Originally Posted by Arslanmayo

Operation : HW Report [ v2.19 ]
HWreport : Mode : eMMC
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM53)
MODE : BOOTROM
PORT : 53
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN RAPHAEL
BROM : MEID : 4C808A6CAFBE9BB02168F4FA9C76FBA9
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2012 | Manual : Disabled
BROM : SOCID : 5C710942998C7BDC84FD654F76B44D77DFEDAEF2387E23D541 AB8A1C108DAD54
BROM : SLA : Local Auth

Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

Info : LEGACY : HW reporting feature unavailable for current device!

Done!
Elapsed: 00:00:25

Restart software one more time.

If still have any error - re-install CM2MT2 module again.

zouhir · 01-28-2021, 14:13

please when you phone is good and you do read flash so upload it to infinity support flash file

Arslanmayo · 01-28-2021, 14:21

Quote:

Originally Posted by JayDi

Restart software one more time.

If still have any error - re-install CM2MT2 module again.

solved bro but phone is not working normaly some times menu opens and sometime black screen here are hw reprt logs 80% reserved blocks used can it be fixed with flashing
Load IDBase v125162 Ok!

Operation : HW Report [ v2.19 ]
HWreport : Mode : eMMC
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM53)
MODE : BOOTROM
PORT : 53
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN RAPHAEL
BROM : MEID : 4C808A6CAFBE9BB02168F4FA9C76FBA9
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2012 | Manual : Disabled
BROM : SOCID : 5C710942998C7BDC84FD654F76B44D77DFEDAEF2387E23D541 AB8A1C108DAD54
BROM : SLA : Local Auth
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : PRELOADER_INFINITY_0
EMI : CNT : 0003
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00038000 [ 224.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 150100514436334D42037B687BFB60B
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QD63MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 2CB244FBC5D21F61E589BC724AC69AEA

DA : USB : HIGH-SPEED

Boot done!

Memory Info :
CID : 150100514436334D42037B6807BFB60B
MEM : VEN : SAMSUNG | OEM : 01 | DEV : QD63MB
DAT : Size: 29820 MB, Max.Speed: 52000 kHz, blklen(512), nblks(61071360), ro(0)

EXT_CSD Info :
EXT_CSD rev. : v1.8 ( MMC v5.1 )
CSD struct rev. : v1.2
Supported command sets : 1h
HPI features : 1h
BG operations support : 1h
BG operations status : 0h
Correct prg. sectors : 0h
1st init time after part. : 3000 ms
Min. write perf.(DDR,52MH,8b): 0h
Min. read perf. (DDR,52MH,8b): 0h
TRIM timeout: 0 ms
Secure feature support: 55h
Secure erase timeout : 8100 ms
Secure trim timeout : 5100 ms
Access size : 3584 bytes
HC erase unit size : 512 kbytes
HC erase timeout : 300 ms
HC write prot grp size: 8192 kbytes
HC erase grp def. : 0h
Reliable write sect count: 1h
Sleep current (VCC) : 7h
Sleep current (VCCQ): 7h
Sleep/awake timeout : 26214400 ns
Sector count : 3a3e000h
Min. WR Perf. (52MH,8b): 0h
Min. Read Perf.(52MH,8b): 0h
Min. WR Perf. (26MH,8b,52MH,4b): 0h
Min. Read Perf.(26MH,8b,52MH,4b): 0h
Min. WR Perf. (26MH,4b): 0h
Min. Read Perf.(26MH,4b): 0h
Power class: 0
Power class(DDR,52MH,3.6V): 0h
Power class(DDR,52MH,1.9V): 0h
Power class(26MH,3.6V) : 0h
Power class(52MH,3.6V) : 0h
Power class(26MH,1.9V) : 0h
Power class(52MH,1.9V) : 0h
Part. switch timing : 2h
Out-of-INTR busy timing: ah
Card type : 57h
Command set : 0h
Command set rev.: 0h
HS timing : 0h
Bus width : 0h
Erase memory content : 0h
Partition config : 48h
Boot partition size : 4096 kbytes
Boot information : 7h
Boot config protection: 0h
Boot bus width : 2h
Boot area write prot : 0h
User area write prot : 0h
FW configuration : 0h
RPMB size : 16384 kbytes
Write rel. setting : 1fh
Write rel. parameter: 14h
Start background ops : 0h
Enable background ops: 2h
H/W reset function : 1h
HPI management : 0h
Max. enhanced area size : 747h (15261696 kbytes)
Part. support : 7h
Part. attribute: 0h
Part. setting : 0h
General purpose 1 size : 0h (0 kbytes)
General purpose 2 size : 0h (0 kbytes)
General purpose 3 size : 0h (0 kbytes)
General purpose 4 size : 0h (0 kbytes)
Enh. user area size : 0h (0 kbytes)
Enh. user area start: 0h
Bad block mgmt mode: 0h

Overall status :

MLC status : 10% - 20% used
SLC status : 10% - 20% used
EOL status : Normal ( Less than 80% reserved blocks used )

RPMB : RPMB KEY EXISTS! [State : NOT CLEAN : UNUSABLE]

Done!
Elapsed: 00:00:21

Operation : Reset Settings/Format FS [ v2.19 ]
Mode : SMART RESET
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM53)
MODE : BOOTROM
PORT : 53
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN RAPHAEL
BROM : MEID : 4C808A6CAFBE9BB02168F4FA9C76FBA9
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2012 | Manual : Disabled
BROM : SOCID : 5C710942998C7BDC84FD654F76B44D77DFEDAEF2387E23D541 AB8A1C108DAD54
BROM : SLA : Local Auth
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : PRELOADER_INFINITY_0
EMI : CNT : 0003
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00038000 [ 224.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 150100514436334D42037B687BFB60B
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QD63MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 2CB244FBC5D21F61E589BC724AC69AEA

DA : USB : HIGH-SPEED

Boot done!

SmartInfo detect failed!

Done!
Elapsed: 00:01:53

Reconnect Power/Cable!

JayDi · 01-28-2021, 15:32

Just try reflash it. Maybe, it helps. But maybe not. Ugly flash IC inside.

01-28-2021, 07:13	#18 (permalink)
kamal_singla Product Supporter Join Date: Jun 2014 Location: India Posts: 5,063 Member: 2211790 Status: Offline Thanks Meter: 5,118	uploading soon you can download from IOS

01-28-2021, 14:06	#22 (permalink)
Arslanmayo No Life Poster Join Date: Oct 2015 Location: Pakistan Posts: 1,732 Member: 2478233 Status: Offline Thanks Meter: 596	im getting this error on oppo a5s cph 1909

01-28-2021, 14:08	#23 (permalink)
Arslanmayo No Life Poster Join Date: Oct 2015 Location: Pakistan Posts: 1,732 Member: 2478233 Status: Offline Thanks Meter: 596	Operation : HW Report [ v2.19 ] HWreport : Mode : eMMC 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port_V1632 (COM53) MODE : BOOTROM PORT : 53 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 CODE : Cervino TYPE : MODERN RAPHAEL BROM : MEID : 4C808A6CAFBE9BB02168F4FA9C76FBA9 BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SDA+EXT BROM : BROM\|BL : 0x05\|0xFE BROM : BOOTROM MODE : 0_base : BASE_v2012 \| Manual : Disabled BROM : SOCID : 5C710942998C7BDC84FD654F76B44D77DFEDAEF2387E23D541 AB8A1C108DAD54 BROM : SLA : Local Auth Error : Fail to init protocol! >>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation! Reconnect Power/Cable! Info : LEGACY : HW reporting feature unavailable for current device! Done! Elapsed: 00:00:25

01-28-2021, 14:08	#24 (permalink)
Arslanmayo No Life Poster Join Date: Oct 2015 Location: Pakistan Posts: 1,732 Member: 2478233 Status: Offline Thanks Meter: 596	Operation : HW Report [ v2.19 ] HWreport : Mode : eMMC 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port_V1632 (COM53) MODE : BOOTROM PORT : 53 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 CODE : Cervino TYPE : MODERN RAPHAEL BROM : MEID : 4C808A6CAFBE9BB02168F4FA9C76FBA9 BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SDA+EXT BROM : BROM\|BL : 0x05\|0xFE BROM : BOOTROM MODE : 0_base : BASE_v2012 \| Manual : Disabled BROM : SOCID : 5C710942998C7BDC84FD654F76B44D77DFEDAEF2387E23D541 AB8A1C108DAD54 BROM : SLA : Local Auth Error : Fail to init protocol! >>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation! Reconnect Power/Cable! Info : LEGACY : HW reporting feature unavailable for current device! Done! Elapsed: 00:00:25

01-28-2021, 14:11	#25 (permalink)
Arslanmayo No Life Poster Join Date: Oct 2015 Location: Pakistan Posts: 1,732 Member: 2478233 Status: Offline Thanks Meter: 596	problem solved but need firmware bro urgent Operation : Identify [ v2.19 ] Mode : FLASH 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port_V1632 (COM53) MODE : BOOTROM PORT : 53 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 CODE : Cervino TYPE : MODERN RAPHAEL BROM : MEID : 4C808A6CAFBE9BB02168F4FA9C76FBA9 BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SDA+EXT BROM : BROM\|BL : 0x05\|0xFE BROM : BOOTROM MODE : 0_base : BASE_v2044 \| Manual : Disabled BROM : SOCID : 5C710942998C7BDC84FD654F76B44D77DFEDAEF2387E23D541 AB8A1C108DAD54 BROM : SLA : Local Auth BROM : SLA : Auth Passed! BROM : SLA : 0x0000001F AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6765 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized! EMI : DEV : INFINITY EMI : SRC : PRELOADER_INFINITY_0 EMI : CNT : 0003 EMI : Init EMI from INTERNAL DB EMI : EXT_RAM CFG Passed! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x0003A000 [ 232.00 KB ] DRAM: 0x80000000 [ 2.00 GB ] EMMC: 150100514436334D42037B687BFB60B EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : QD63MB EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x01000000 [ 16.00 MB ] USER : 0x747C00000 [ 29.12 GB ] CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 2CB244FBC5D21F61E589BC724AC69AEA DA : USB : HIGH-SPEED Boot done! Done! Elapsed: 00:00:19 Reconnect Power/Cable!

01-28-2021, 14:11	#26 (permalink)
Arslanmayo No Life Poster Join Date: Oct 2015 Location: Pakistan Posts: 1,732 Member: 2478233 Status: Offline Thanks Meter: 596	problem solved but need firmware bro urgent Operation : Identify [ v2.19 ] Mode : FLASH 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port_V1632 (COM53) MODE : BOOTROM PORT : 53 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 CODE : Cervino TYPE : MODERN RAPHAEL BROM : MEID : 4C808A6CAFBE9BB02168F4FA9C76FBA9 BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SDA+EXT BROM : BROM\|BL : 0x05\|0xFE BROM : BOOTROM MODE : 0_base : BASE_v2044 \| Manual : Disabled BROM : SOCID : 5C710942998C7BDC84FD654F76B44D77DFEDAEF2387E23D541 AB8A1C108DAD54 BROM : SLA : Local Auth BROM : SLA : Auth Passed! BROM : SLA : 0x0000001F AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6765 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized! EMI : DEV : INFINITY EMI : SRC : PRELOADER_INFINITY_0 EMI : CNT : 0003 EMI : Init EMI from INTERNAL DB EMI : EXT_RAM CFG Passed! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x0003A000 [ 232.00 KB ] DRAM: 0x80000000 [ 2.00 GB ] EMMC: 150100514436334D42037B687BFB60B EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : QD63MB EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x01000000 [ 16.00 MB ] USER : 0x747C00000 [ 29.12 GB ] CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 2CB244FBC5D21F61E589BC724AC69AEA DA : USB : HIGH-SPEED Boot done! Done! Elapsed: 00:00:19 Reconnect Power/Cable!

01-28-2021, 14:13	#28 (permalink)
zouhir No Life Poster Join Date: Jun 2005 Posts: 878 Member: 154448 Status: Offline Sonork: not yet Thanks Meter: 50	please when you phone is good and you do read flash so upload it to infinity support flash file

01-28-2021, 15:32	#30 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Just try reflash it. Maybe, it helps. But maybe not. Ugly flash IC inside.