GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 01-26-2021, 21:02   #1 (permalink)
No Life Poster
 
atou's Avatar
 
Join Date: Sep 2010
Posts: 1,978
Member: 1388609
Status: Offline
Sonork: atou
Thanks Meter: 143
Donate money to this user
oppo f11 pro cph1969 DEAD AFTER HW REPORT


Card found : 7C446640 , v0147
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.18

Load IDBase v125162 Ok!


Operation : HW Report [ v2.18 ]
HWreport : Mode : eMMC
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM39)
MODE : BOOTROM
PORT : 39
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Sylvia
TYPE : MODERN RAPHAEL
BROM : MEID : C200DC4C60E4E4901B65F225EF9F415F
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : C28E4D097378EDC8EE8B730BDEE51DC215DDBA5BC1A070E6F0 3E56413CFF8266
BROM : LOG : F0: 102B 0000 F3: 4000 0036 [0200] F3: 4000 0036 F7: 102D 0000 00: 1005 0000 F3: 4000 0036 [0200] F3: 4000 0036 F7: 102D 0000 01: 102A 0001
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6771
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...

BROM : 0x00007017 : DA SEND ERROR!
ERROR : SECURE BOOT : SLA REQUIRED IN BROM MODE!
INFO : BROM Level : CERT/AUTH required! Try boot device in PRELOADER mode with select PL/PL_CRYPTO/SWSEC type!
Info : LEGACY : HW reporting feature unavailable for current device!


Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!



Done!
Elapsed: 00:01:34

Operation : HW Report [ v2.18 ]
HWreport : Mode : UFS
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM39)
MODE : BOOTROM
PORT : 39
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Sylvia
TYPE : MODERN RAPHAEL
BROM : MEID : C200DC4C60E4E4901B65F225EF9F415F
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : C28E4D097378EDC8EE8B730BDEE51DC215DDBA5BC1A070E6F0 3E56413CFF8266
BROM : LOG : F0: 102B 0000 F3: 4000 0036 [0200] F3: 4000 0036 F7: 102D 0000 00: 1005 0000 F3: 4000 0036 [0200] F3: 4000 0036 F7: 102D 0000 01: 102A 0001
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6771
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...

BROM : 0x00007017 : DA SEND ERROR!
ERROR : SECURE BOOT : SLA REQUIRED IN BROM MODE!
INFO : BROM Level : CERT/AUTH required! Try boot device in PRELOADER mode with select PL/PL_CRYPTO/SWSEC type!
Info : LEGACY : HW reporting feature unavailable for current device!


Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!



Done!
Elapsed: 00:00:14

Operation : HW Report [ v2.18 ]
HWreport : Mode : eMMC
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM39)
MODE : BOOTROM
PORT : 39
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Sylvia
TYPE : MODERN RAPHAEL
BROM : MEID : C200DC4C60E4E4901B65F225EF9F415F
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : C28E4D097378EDC8EE8B730BDEE51DC215DDBA5BC1A070E6F0 3E56413CFF8266
BROM : LOG : F0: 102B 0000 F3: 4000 0036 [0200] F3: 4000 0036 F7: 102D 0000 00: 1005 0000 F3: 4000 0036 [0200] F3: 4000 0036 F7: 102D 0000 01: 102A 0001
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6771
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...

BROM : 0x00007017 : DA SEND ERROR!
ERROR : SECURE BOOT : SLA REQUIRED IN BROM MODE!
INFO : BROM Level : CERT/AUTH required! Try boot device in PRELOADER mode with select PL/PL_CRYPTO/SWSEC type!
Info : LEGACY : HW reporting feature unavailable for current device!


Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!



Done!
Elapsed: 00:00:08

Operation : Reset Settings/Format FS [ v2.18 ]
Mode : SMART RESET
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
  Reply With Quote
Old 01-27-2021, 02:34   #2 (permalink)
No Life Poster
 
kamal_singla's Avatar
 
Join Date: Jun 2014
Location: https://t.me/kamal_singla
Age: 28
Posts: 4,720
Member: 2211790
Status: Offline
Thanks Meter: 4,691
We don't support such CPU and into logs it's not boot
Then how dead ?
Reconnect/charge battery check
  Reply With Quote
The Following User Says Thank You to kamal_singla For This Useful Post:
Old 01-27-2021, 04:29   #3 (permalink)
Freak Poster
 
Join Date: Jun 2010
Location: Philippines
Posts: 262
Member: 1328371
Status: Offline
Thanks Meter: 101
Try to Press Volume Up + Volume Down + Power button till phone power on..
  Reply With Quote
Old 01-27-2021, 12:36   #4 (permalink)
No Life Poster
 
atou's Avatar
 
Join Date: Sep 2010
Posts: 1,978
Member: 1388609
Status: Offline
Sonork: atou
Thanks Meter: 143
Donate money to this user
Load IDBase v125162 Ok!


Operation : HW Report [ v2.18 ]
HWreport : Mode : eMMC
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM64)
MODE : BOOTROM
PORT : 64
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Sylvia
TYPE : MODERN RAPHAEL
BROM : MEID : C200DC4C60E4E4901B65F225EF9F415F
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : C28E4D097378EDC8EE8B730BDEE51DC215DDBA5BC1A070E6F0 3E56413CFF8266
BROM : LOG : F0: 102B 0000 F3: 4000 0036 [0200] F3: 4000 0036 F7: 102D 0000 00: 1005 0000 F3: 4000 0036 [0200] F3: 4000 0036 F7: 102D 0000 01: 102A 0001
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6771
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...

BROM : 0x00007017 : DA SEND ERROR!
ERROR : SECURE BOOT : SLA REQUIRED IN BROM MODE!
INFO : BROM Level : CERT/AUTH required! Try boot device in PRELOADER mode with select PL/PL_CRYPTO/SWSEC type!
Info : LEGACY : HW reporting feature unavailable for current device!


Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!



first time phone working
now black screen
  Reply With Quote
Old 01-27-2021, 13:12   #5 (permalink)
No Life Poster
 
Aamir_Zia's Avatar
 
Join Date: Dec 2003
Location: Karachi Pakistan
Age: 36
Posts: 6,746
Member: 47321
Status: Offline
Sonork: 100.54032
Thanks Meter: 489
disconnect and reconnect battery
  Reply With Quote
Old 01-27-2021, 15:11   #6 (permalink)
No Life Poster
 
atou's Avatar
 
Join Date: Sep 2010
Posts: 1,978
Member: 1388609
Status: Offline
Sonork: atou
Thanks Meter: 143
Donate money to this user
Quote:
Originally Posted by Aamir_Zia View Post
disconnect and reconnect battery
i already try this same problem
  Reply With Quote
Old 01-27-2021, 15:41   #7 (permalink)
No Life Poster
 
Join Date: Sep 2015
Location: SINDH, PAKISTAN.
Posts: 589
Member: 2452939
Status: Offline
Thanks Meter: 253
Show MTK port in device manager?

Try again with hw report by pressing volume keys and post result.
  Reply With Quote
Old 01-27-2021, 18:52   #8 (permalink)
Junior Member
 
Join Date: Feb 2014
Location: pakistan
Posts: 31
Member: 2120470
Status: Offline
Thanks Meter: 0
Write extcsd with jtag. Only solution.
  Reply With Quote
Old 01-27-2021, 21:47   #9 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Posts: 18,112
Member: 462970
Status: Offline
Thanks Meter: 19,586
It is CAN'T dead because boot - related only to RAM memory, nothing bad happen with device at all.

If you made some kind of TP - make sure you not burn the board or broke some resistor.
  Reply With Quote
Old 01-28-2021, 05:12   #10 (permalink)
No Life Poster
 
rahihimkhan's Avatar
 
Join Date: Oct 2007
Location: Dera Ismail Khan (KPK) Pak
Posts: 2,398
Member: 613449
Status: Offline
Sonork: 100.1614074
Thanks Meter: 611
oppo f11 pro cph1969 no problem AFTER HW REPORT


i already tested

infinity Team delete this worng posting
  Reply With Quote
Old 01-28-2021, 05:20   #11 (permalink)
No Life Poster
 
sigma xi's Avatar
 
Join Date: May 2008
Location: philippines
Posts: 596
Member: 773960
Status: Offline
Thanks Meter: 522
just do hard reboot it will alive again
  Reply With Quote
The Following User Says Thank You to sigma xi For This Useful Post:
Old 01-28-2021, 08:23   #12 (permalink)
Freak Poster
 
Join Date: Aug 2015
Posts: 403
Member: 2439409
Status: Offline
Thanks Meter: 101
hello now i chack oppo f11 pro fully dead my phone
here is hw report

Card found : D1298E72 , v0147
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.19

Load IDBase v125162 Ok!

Update configuration ...
Update Ok!
Load IDBase v125162 Ok!

Operation : HW Report [ v2.19 ]
HWreport : Mode : eMMC
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB VCOM (Android) (COM8)
MODE : BOOTROM
PORT : 8
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Sylvia
TYPE : MODERN RAPHAEL
BROM : MEID : 24F82B2DB82DCB001B9F27609AA381C1
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : 6C2B1EA5691634F5DD456937AFBBA7B5E6E132B4EF88BD6E4A C00E61905CC3A8
BROM : SLA : Local Auth
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6771
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : PRELOADER_INFINITY_0
EMI : CNT : 0002
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00039000 [ 228.00 KB ]
DRAM: 0x180000000 [ 6.00 GB ]

EMMC: 90014A68444561503303CBA539783681
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : hDEaP3
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x1D1F000000 [ 116.48 GB ]

CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 45B13EBF9B0385E7919F20AFDA8588CD

DA : USB : HIGH-SPEED

Boot done!

Memory Info :
CID : 90014A68444561503303CBA539783681
MEM : VEN : HYNIX | OEM : 4A01 | DEV : hDEaP3
DAT : Size: 119280 MB, Max.Speed: 52000 kHz, blklen(512), nblks(244285440), ro(0)

EXT_CSD Info :
EXT_CSD rev. : v1.8 ( MMC v5.1 )
CSD struct rev. : v1.2
Supported command sets : 1h
HPI features : 1h
BG operations support : 1h
BG operations status : 0h
Correct prg. sectors : 0h
1st init time after part. : 1000 ms
Min. write perf.(DDR,52MH,8b): 0h
Min. read perf. (DDR,52MH,8b): 0h
TRIM timeout: 0 ms
Secure feature support: 55h
Secure erase timeout : 150000 ms
Secure trim timeout : 150000 ms
Access size : 3584 bytes
HC erase unit size : 512 kbytes
HC erase timeout : 600 ms
HC write prot grp size: 8192 kbytes
HC erase grp def. : 0h
Reliable write sect count: 1h
Sleep current (VCC) : 8h
Sleep current (VCCQ): 9h
Sleep/awake timeout : 419430400 ns
Sector count : e8f8000h
Min. WR Perf. (52MH,8b): 8ch
Min. Read Perf.(52MH,8b): 8ch
Min. WR Perf. (26MH,8b,52MH,4b): 46h
Min. Read Perf.(26MH,8b,52MH,4b): 46h
Min. WR Perf. (26MH,4b): 1eh
Min. Read Perf.(26MH,4b): 1eh
Power class: 0
Power class(DDR,52MH,3.6V): 0h
Power class(DDR,52MH,1.9V): 0h
Power class(26MH,3.6V) : 0h
Power class(52MH,3.6V) : 0h
Power class(26MH,1.9V) : 0h
Power class(52MH,1.9V) : 0h
Part. switch timing : 1h
Out-of-INTR busy timing: ah
Card type : 57h
Command set : 0h
Command set rev.: 0h
HS timing : 0h
Bus width : 0h
Erase memory content : 0h
Partition config : 48h
Boot partition size : 4096 kbytes
Boot information : 7h
Boot config protection: 0h
Boot bus width : 2h
Boot area write prot : 0h
User area write prot : 0h
FW configuration : 0h
RPMB size : 16384 kbytes
Write rel. setting : 1fh
Write rel. parameter: 15h
Start background ops : 0h
Enable background ops: 2h
H/W reset function : 1h
HPI management : 0h
Max. enhanced area size : 136ah (40714240 kbytes)
Part. support : 7h
Part. attribute: 0h
Part. setting : 0h
General purpose 1 size : 0h (0 kbytes)
General purpose 2 size : 0h (0 kbytes)
General purpose 3 size : 0h (0 kbytes)
General purpose 4 size : 0h (0 kbytes)
Enh. user area size : 0h (0 kbytes)
Enh. user area start: 0h
Bad block mgmt mode: 0h

Overall status :

MLC status : 0% - 10% used
SLC status : Not defined
EOL status : Normal ( Less than 80% reserved blocks used )


RPMB : RPMB KEY EXISTS! [State : NOT CLEAN : UNUSABLE]


Done!
Elapsed: 00:00:18



any one have firmware please share
  Reply With Quote
Old 01-28-2021, 11:16   #13 (permalink)
No Life Poster
 
atou's Avatar
 
Join Date: Sep 2010
Posts: 1,978
Member: 1388609
Status: Offline
Sonork: atou
Thanks Meter: 143
Donate money to this user
Quote:
Originally Posted by Gsm Unkown View Post
hello now i chack oppo f11 pro fully dead my phone
here is hw report

Card found : D1298E72 , v0147
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.19

Load IDBase v125162 Ok!

Update configuration ...
Update Ok!
Load IDBase v125162 Ok!

Operation : HW Report [ v2.19 ]
HWreport : Mode : eMMC
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB VCOM (Android) (COM8)
MODE : BOOTROM
PORT : 8
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Sylvia
TYPE : MODERN RAPHAEL
BROM : MEID : 24F82B2DB82DCB001B9F27609AA381C1
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : 6C2B1EA5691634F5DD456937AFBBA7B5E6E132B4EF88BD6E4A C00E61905CC3A8
BROM : SLA : Local Auth
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6771
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : PRELOADER_INFINITY_0
EMI : CNT : 0002
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00039000 [ 228.00 KB ]
DRAM: 0x180000000 [ 6.00 GB ]

EMMC: 90014A68444561503303CBA539783681
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : hDEaP3
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x1D1F000000 [ 116.48 GB ]

CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 45B13EBF9B0385E7919F20AFDA8588CD

DA : USB : HIGH-SPEED

Boot done!

Memory Info :
CID : 90014A68444561503303CBA539783681
MEM : VEN : HYNIX | OEM : 4A01 | DEV : hDEaP3
DAT : Size: 119280 MB, Max.Speed: 52000 kHz, blklen(512), nblks(244285440), ro(0)

EXT_CSD Info :
EXT_CSD rev. : v1.8 ( MMC v5.1 )
CSD struct rev. : v1.2
Supported command sets : 1h
HPI features : 1h
BG operations support : 1h
BG operations status : 0h
Correct prg. sectors : 0h
1st init time after part. : 1000 ms
Min. write perf.(DDR,52MH,8b): 0h
Min. read perf. (DDR,52MH,8b): 0h
TRIM timeout: 0 ms
Secure feature support: 55h
Secure erase timeout : 150000 ms
Secure trim timeout : 150000 ms
Access size : 3584 bytes
HC erase unit size : 512 kbytes
HC erase timeout : 600 ms
HC write prot grp size: 8192 kbytes
HC erase grp def. : 0h
Reliable write sect count: 1h
Sleep current (VCC) : 8h
Sleep current (VCCQ): 9h
Sleep/awake timeout : 419430400 ns
Sector count : e8f8000h
Min. WR Perf. (52MH,8b): 8ch
Min. Read Perf.(52MH,8b): 8ch
Min. WR Perf. (26MH,8b,52MH,4b): 46h
Min. Read Perf.(26MH,8b,52MH,4b): 46h
Min. WR Perf. (26MH,4b): 1eh
Min. Read Perf.(26MH,4b): 1eh
Power class: 0
Power class(DDR,52MH,3.6V): 0h
Power class(DDR,52MH,1.9V): 0h
Power class(26MH,3.6V) : 0h
Power class(52MH,3.6V) : 0h
Power class(26MH,1.9V) : 0h
Power class(52MH,1.9V) : 0h
Part. switch timing : 1h
Out-of-INTR busy timing: ah
Card type : 57h
Command set : 0h
Command set rev.: 0h
HS timing : 0h
Bus width : 0h
Erase memory content : 0h
Partition config : 48h
Boot partition size : 4096 kbytes
Boot information : 7h
Boot config protection: 0h
Boot bus width : 2h
Boot area write prot : 0h
User area write prot : 0h
FW configuration : 0h
RPMB size : 16384 kbytes
Write rel. setting : 1fh
Write rel. parameter: 15h
Start background ops : 0h
Enable background ops: 2h
H/W reset function : 1h
HPI management : 0h
Max. enhanced area size : 136ah (40714240 kbytes)
Part. support : 7h
Part. attribute: 0h
Part. setting : 0h
General purpose 1 size : 0h (0 kbytes)
General purpose 2 size : 0h (0 kbytes)
General purpose 3 size : 0h (0 kbytes)
General purpose 4 size : 0h (0 kbytes)
Enh. user area size : 0h (0 kbytes)
Enh. user area start: 0h
Bad block mgmt mode: 0h

Overall status :

MLC status : 0% - 10% used
SLC status : Not defined
EOL status : Normal ( Less than 80% reserved blocks used )


RPMB : RPMB KEY EXISTS! [State : NOT CLEAN : UNUSABLE]


Done!
Elapsed: 00:00:18



any one have firmware please share
i have same problem
i need too firmware
  Reply With Quote
Old 01-31-2021, 15:29   #14 (permalink)
No Life Poster
 
atou's Avatar
 
Join Date: Sep 2010
Posts: 1,978
Member: 1388609
Status: Offline
Sonork: atou
Thanks Meter: 143
Donate money to this user
help

i need help plz

thx
  Reply With Quote
Old 01-31-2021, 22:36   #15 (permalink)
Freak Poster
 
Join Date: Mar 2014
Location: NIGERIA
Posts: 135
Member: 2156069
Status: Offline
Thanks Meter: 67
False allegations, maybe you have done some testpoint and messed up the device with other tools... F11 pro, fully tested by me. Even dead f11 pro revived by cm2 by me, tomorrow I will post logs...
  Reply With Quote
The Following User Says Thank You to merujeffrey For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 09:28.



Powered by Searchlight © 2021 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.23887 seconds with 7 queries

SEO by vBSEO