Oppo F7 Hang On Logo After FOrmat By CM2 R4 - Page 2 - GSM-Forum

M Osman · 07-12-2018, 12:04

Quote:

Originally Posted by john kenneth

F7 (CPH1819) Restart after Format

Sir,try this way ..

Perform Reset Settings/Format FS
Full Factory (Forced + FRP)

After reset phone RESTART
Try Reboot via Recovery
If phone still Restart,Do Init MemoryTool

Init MemoryTool
Select CACHE
press and hold CTRL key
Select USERDATA
Now both selected. Right click - Wipe/Erase partitions
Reboot device

Phone stop Restarting but always loading
Now do Wipe Data and Reboot via Recovery
Now my phone Fix,hope your phone too
Done

problem solved but when phone restart again yhang on logo

fooof · 07-14-2018, 14:51

problem solved but after reboot still hang on logo any solution plz

tsabila · 07-15-2018, 05:03

Quote:

Originally Posted by fooof

problem solved but after reboot still hang on logo any solution plz

i have same problem, the problem is just screen lock before

Quote:

Operation : Reset Settings/Format FS [ v2.00 r4 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM45)
MODE : BOOTROM
PORT : 45
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+SEL
BROM : BOOTROM
MODE : Oppo : F7 | Manual : Disabled
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_BR_HIGH.bin
AGENT : Found MT6771
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
EMI : CNT : 000E
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256,00 KB ]
DRAM: 0xC0000000 [ 3,00 GB ]

EMMC: 90014A484347386134A24886DED915C7
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HCG8a4
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0xE8F800000 [ 58,24 GB ]

CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : CCB2E83A04C8FD68C148B17D77E3783

DA : USB : HIGH-SPEED

Boot done!

Format Ok : USERDATA
Format Ok : CACHE
Format Ok : RESET PROTECTION

Done!
Elapsed: 00.00.33

Reconnect Power/Cable!

Operation : Memory Tool Init [ v2.00 r4 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM45)
MODE : BOOTROM
PORT : 45
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+SEL
BROM : BOOTROM
MODE : Oppo : F7 | Manual : Disabled
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_BR_HIGH.bin
AGENT : Found MT6771
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
EMI : CNT : 000E
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256,00 KB ]
DRAM: 0xC0000000 [ 3,00 GB ]

EMMC: 90014A484347386134A24886DED915C7
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HCG8a4
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0xE8F800000 [ 58,24 GB ]

CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : CCB2E83A04C8FD68C148B17D77E3783

DA : USB : HIGH-SPEED

Boot done!

Set default path : D:\INFINITY\CM2MT2\phdata\

Ready!

Operation : Erase Memory [ v2.00 r4 ]

Erase selected partitions [2]
[0] Erase partition : CACHE
Erase partition Ok!
[1] Erase partition : USERDATA
Erase partition Ok!

Operation finished!

Close MemoryTool session

Done!
Elapsed: 00.00.57

Reconnect Power/Cable!

after wipe cache and userdata phone become alive, but hang on logo after rebooted

any suggestion?

tsabila · 07-15-2018, 19:17

Quote:

Originally Posted by tsabila

i have same problem, the problem is just screen lock before

after wipe cache and userdata phone become alive, but hang on logo after rebooted

any suggestion?

any suggestion
please help

WBR

joseck · 07-28-2018, 06:24

Quote:

Originally Posted by bisubikash

Set default path : C:\InfinityBox\CM2MT2\phdata\

Ready!

Operation : Erase Memory [ v2.00 r4 ]

Erase selected partitions [2]
[0] Erase partition : CACHE
Erase partition Ok!
[1] Erase partition : USERDATA
Erase partition Ok!

Operation finished!

NOW working but when you switch off and on again goes back to hang on logo,any other remedy?

mubarak2344 · 07-28-2018, 08:31

Write Usedata and cache from cm2 readed file....

danishamini.sai · 07-28-2018, 10:32

Infinity Team to look and resolve.. This is the problem who has tiface anyone who remove pattern

bisubikash · 07-28-2018, 12:41

Init MemoryTool
Select CACHE
press and hold CTRL key
Select USERDATA
Now both selected. Right click - Wipe/Erase partitions
Do.
Reboot device n wipe again

sgreenphone · 07-28-2018, 21:39

MT6771__OPPO__CPH1819__8.1.0__CPH1819EX_11_A.07_18 0401__O11019__CPH1819

download this firmware and flash

only CACHE AND USERDATA

[IMG]

[/IMG]

anoamocreative · 07-29-2018, 08:26

Don't forget if device has boot normally... use reset all in menu setting on phone... I have try it... 2 set already done

Quote:

Operation : Identify [ v2.00 r4 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+SEL
BROM : BOOTROM
MODE : Oppo : F7 | Manual : Disabled
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_BR_HIGH.bin
AGENT : Found MT6771
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
EMI : CNT : 000E
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256,00 KB ]
DRAM: 0xC0000000 [ 3,00 GB ]

EMMC: 150100444836444D4205D3A1AC69B4B5
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : DH6DMB
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0xE8F800000 [ 58,24 GB ]

CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 75BFCAEA4D7B347361A7F19CA4125012

DA : USB : HIGH-SPEED

Boot done!

Patch Level : O11019
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-04-05
Product Manfct : OPPO
Build Time : 1527012355
Product Brand : OPPO
Product Model : CPH1819
Product Info : CPH1819
Product Device : CPH1819
Product Name : CPH1819
SW OTA Version : CPH1819EX_11.A.14_0140_201805230117
Display ID : CPH1819EX_11_A.14_180523
Kernel Info : 4.4.95-G201805230117

USERDATA : ENCRYPTED

Done!
Elapsed: 00:00:24

Quote:

Operation : Read Firmware [ v2.00 r4 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+SEL
BROM : BOOTROM
MODE : Oppo : F7 | Manual : Disabled
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_BR_HIGH.bin
AGENT : Found MT6771
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
EMI : CNT : 000E
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256,00 KB ]
DRAM: 0xC0000000 [ 3,00 GB ]

EMMC: 150100444836444D4205D3A1AC69B4B5
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : DH6DMB
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0xE8F800000 [ 58,24 GB ]

CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 75BFCAEA4D7B347361A7F19CA4125012

DA : USB : HIGH-SPEED

Boot done!

Patch Level : O11019
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-04-05
Product Manfct : OPPO
Build Time : 1527012355
Product Brand : OPPO
Product Model : CPH1819
Product Info : CPH1819
Product Device : CPH1819
Product Name : CPH1819
SW OTA Version : CPH1819EX_11.A.14_0140_201805230117
Display ID : CPH1819EX_11_A.14_180523
Kernel Info : 4.4.95-G201805230117

MT6771__OPPO__CPH1819__8.1.0__CPH1819EX_11_A.14_18 0523__O11019__CPH1819

Read : preloader.bin
Read : recovery.img
Read : oppo_custom.img
Read : persist.img
ExtSparse : Compression ratio : 98%
Read : proinfo.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : tinysys-sspm.bin
Read : cam_vpu1.img
Read : cam_vpu2.img
Read : cam_vpu3.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : odmdtbo.img
Read : tz.img
Read : odm.img
ExtSparse : Compression ratio : 100%
Read : vendor.img
ExtSparse : Compression ratio : 38%
Read : system.img
ExtSparse : Compression ratio : 35%
Read : cache.img
Read : userdata.img

FW Size : 3,92 GB
Android Info saved : _Android_info.txt
Scatter : MT6771_Android_scatter.txt
Saved to : C:\Users\a1\Desktop\MTK\MT6771__OPPO__CPH1819__8.1 .0__CPH1819EX_11_A.14_180523__O11019__CPH1819\

Done!
Elapsed: 00:04:12

azwanboyz_6044 · 08-08-2018, 13:08

thank a lot sir... from malaysia

sameerrc · 08-12-2018, 15:22

just wipe after all this from Recovery u will get seceful result
trust me.
a was same condition,
thn i did wipe from recovery
finaly mobile got full working

khanrbszafar · 09-04-2018, 11:36

after reboot phone stark on logo

bilkers · 09-04-2018, 15:08

I read in this post explaining how to repair oppoF7, I tried using the init memory tool on cm2mt2 but it was still an error, I have asked several times in this infinty forum but until now there is no solution from team infinity, I am a new user of this story, maybe there is something wrong with the installation on this dongle, please help me solve this mobile problem, there has been 1 month for me, and it hasn't been resolved, even though the other users I see almost all solved, thank you very much,

abdul kadhar · 11-11-2018, 09:24

Quote:

Originally Posted by M Osman

problem solved but when phone restart again yhang on logo

me tested 1000%%% redy thank you

07-28-2018, 12:41	#23 (permalink)
bisubikash Major Poster Join Date: Nov 2008 Posts: 47 Member: 912384 Status: Offline Thanks Meter: 18	f7 Init MemoryTool Select CACHE press and hold CTRL key Select USERDATA Now both selected. Right click - Wipe/Erase partitions Do. Reboot device n wipe again

07-28-2018, 21:39	#24 (permalink)
sgreenphone Freak Poster Join Date: Feb 2011 Location: ALGERIA Age: 43 Posts: 354 Member: 1513870 Status: Offline Thanks Meter: 46	MT6771__OPPO__CPH1819__8.1.0__CPH1819EX_11_A.07_18 0401__O11019__CPH1819 download this firmware and flash only CACHE AND USERDATA [IMG][/IMG]

07-14-2018, 14:51	#17 (permalink)
fooof Junior Member Join Date: Sep 2008 Posts: 4 Member: 856382 Status: Offline Sonork: 12345 Thanks Meter: 0	problem solved but after reboot still hang on logo any solution plz

07-28-2018, 08:31	#21 (permalink)
mubarak2344 No Life Poster Join Date: Aug 2013 Location: CHENNAI, TAMILNADU,INDIA Posts: 730 Member: 2001848 Status: Offline Sonork: 100.1658212 Thanks Meter: 581	Write Usedata and cache from cm2 readed file....

07-28-2018, 10:32	#22 (permalink)
danishamini.sai Freak Poster Join Date: Oct 2017 Posts: 110 Member: 2763706 Status: Offline Thanks Meter: 60	Infinity Team to look and resolve.. This is the problem who has tiface anyone who remove pattern

08-08-2018, 13:08	#26 (permalink)
azwanboyz_6044 Junior Member Join Date: Nov 2015 Location: kota bharu Age: 33 Posts: 14 Member: 2493412 Status: Offline Thanks Meter: 0	thank a lot sir... from malaysia

08-12-2018, 15:22	#27 (permalink)
sameerrc Insane Poster Join Date: May 2017 Posts: 65 Member: 2712589 Status: Offline Thanks Meter: 6	just wipe after all this from Recovery u will get seceful result trust me. a was same condition, thn i did wipe from recovery finaly mobile got full working

09-04-2018, 11:36	#28 (permalink)
khanrbszafar Junior Member Join Date: Nov 2016 Location: Dhaka,bangladesh Age: 36 Posts: 23 Member: 2643609 Status: Offline Sonork: zafar-01 Thanks Meter: 21	after reboot phone stark on logo

09-04-2018, 15:08	#29 (permalink)
bilkers Freak Poster Join Date: Oct 2013 Location: asia Posts: 116 Member: 2038233 Status: Offline Thanks Meter: 7	I read in this post explaining how to repair oppoF7, I tried using the init memory tool on cm2mt2 but it was still an error, I have asked several times in this infinty forum but until now there is no solution from team infinity, I am a new user of this story, maybe there is something wrong with the installation on this dongle, please help me solve this mobile problem, there has been 1 month for me, and it hasn't been resolved, even though the other users I see almost all solved, thank you very much,