PinFinder AFTER SHORT-CIRCUIT - GSM-Forum

jeanbrume · 08-05-2010, 06:05

HI infinity team
when traying to connect anycool t818 i have a little short circuit(the red led in PinFinder shutdown)
now i tray to read flash the red &green led blink ( in the box )the same time & without any phone connected to PinFinder .
when i remove the PinFinder only the green one blink (as usual).
the soft detect PinFinder :
Initializing...
software version: 1.23
Dongle S/N:
Dongle firmware version: 0116
Initializing PinFinder...
Initializing database...
base/user database version: 01/01
Loading configuration...
Initializing cable list...
Initializing platforms...
Initialization finished
searching adapter at COM3 (115200)...
adapter found, version: 2000
S/N:
done
Initializing...
done

but dont work .
can u help with this?
is it soft or hardware?
if its hard can u tell me what i can chek or change or what else.
many thnx.

jeanbrume · 08-05-2010, 10:46

Hi
tankxall
it was pinfinder 1.23 dont work after roll back to 1.20 all ok!
Wbr
jb

InfinityHelp · 08-05-2010, 15:52

hello!

can you get it correctly work on some other phone?

jeanbrume · 08-09-2010, 00:36

hi
with soft 1.23 none work but
all working good with pinfinder 1.20
tnx.

InfinityHelp · 08-09-2010, 21:49

hello!

please do not use 1.23, it has some bugs

WILUNLOCK · 08-10-2010, 19:25

hi

this version is only for use with the new infinity, which is infinity and pinfinder in 1 ... infinity with the old version does not work....

infinity old using 1.20
infinity new using 1.23 onwards

jeanbrume · 08-13-2010, 00:38

Hi
thanks for support.
We are allways happy with a good product like yours.
Wbr.

08-05-2010, 06:05	#1 (permalink)
jeanbrume Freak Poster Join Date: May 2006 Location: agadir oufla. Posts: 364 Member: 273511 Status: Offline Thanks Meter: 84	PinFinder AFTER SHORT-CIRCUIT HI infinity team when traying to connect anycool t818 i have a little short circuit(the red led in PinFinder shutdown) now i tray to read flash the red &green led blink ( in the box )the same time & without any phone connected to PinFinder . when i remove the PinFinder only the green one blink (as usual). the soft detect PinFinder : Initializing... software version: 1.23 Dongle S/N: Dongle firmware version: 0116 Initializing PinFinder... Initializing database... base/user database version: 01/01 Loading configuration... Initializing cable list... Initializing platforms... Initialization finished searching adapter at COM3 (115200)... adapter found, version: 2000 S/N: done Initializing... done but dont work . can u help with this? is it soft or hardware? if its hard can u tell me what i can chek or change or what else. many thnx.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My 6150 (5.23) No network after Flashing	AboAli	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	01-31-2001 15:56
5110 v 6.0 after unlocking problem with net	cole	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	01-10-2001 16:11
5110/6110 after unlocking see only network to which it was locked and ...	2M	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	07-25-2000 00:51
5110 5.24 locked all 4 locks after unlocking...	MCG	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	03-07-2000 22:24
"Menu 11"? after Net monitor	Pyron	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	08-09-1999 10:07

08-05-2010, 10:46	#2 (permalink)
jeanbrume Freak Poster Join Date: May 2006 Location: agadir oufla. Posts: 364 Member: 273511 Status: Offline Thanks Meter: 84	Hi tankxall it was pinfinder 1.23 dont work after roll back to 1.20 all ok! Wbr jb

08-05-2010, 15:52	#3 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! can you get it correctly work on some other phone?

08-09-2010, 00:36	#4 (permalink)
jeanbrume Freak Poster Join Date: May 2006 Location: agadir oufla. Posts: 364 Member: 273511 Status: Offline Thanks Meter: 84	hi with soft 1.23 none work but all working good with pinfinder 1.20 tnx.

08-09-2010, 21:49	#5 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! please do not use 1.23, it has some bugs

08-10-2010, 19:25	#6 (permalink)
WILUNLOCK No Life Poster Join Date: Mar 2008 Location: Colombia Posts: 1,858 Member: 726741 Status: Offline Thanks Meter: 1,256	hi this version is only for use with the new infinity, which is infinity and pinfinder in 1 ... infinity with the old version does not work.... infinity old using 1.20 infinity new using 1.23 onwards

08-13-2010, 00:38	#7 (permalink)
jeanbrume Freak Poster Join Date: May 2006 Location: agadir oufla. Posts: 364 Member: 273511 Status: Offline Thanks Meter: 84	Hi thanks for support. We are allways happy with a good product like yours. Wbr.