plz help me to fine point plz help me to fine Pinout for zt68 18pin dr hema |
Dear Mr. Hema, Here is detailed instruction for you: Due to a lot of different models with the same name but absolutely different hardware, bottom connectors and different pinouts we recommend you to include the next info: 1. detailed description of model 2. phone CPU chip name 3. phone PCB photo (Rx/Tx/Gnd test-points may exist on phone PCB) 4. attach phone photo 5. attach phone bottom connector photo 6. include information about Gnd and Charge pins on phone bottom connector After you have this information prepared, check the next detailed description how to get pinout for your model: use "Cable Selector": http://forum.gsmhosting.com/vbb/showthread.php?t=398297 if not helps, please read: C:\Program Files\InfinityBox\pinout\ChineseMiracle\ if not helps, please read: http:///vbb/showpo...36&postcount=7 if not helps, please read: http:///vbb/showthread.php?t=433447 |
keyboard top 1.........18 1;2: Gnd 7: Rx 9: Tx for RJ-45 always : (rx=2; tx=3;gnd=8+9) .................................................. ........................ tested it work 1000/100 .................................................. ........................ replay me i need the firmwere for zt68(([email protected])) |
keyboard top 1.........18 1;2: Gnd 7: tx 9: Rx for RJ-45 always : (rx=2; tx=3;gnd=8+9) .................................................. ........................ i test this pinout and it work on many phones like any cool...etc..:rolleyes: |
All times are GMT +1. The time now is 14:02. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -