plz team urgent help need - GSM-Forum

joni_rajpura · 02-20-2008, 13:20

still cant able to fine any pin out with 2x6 conector plz team work on this convector type i try with 9-10 phone still cant able to get pinout from any phone connector type 2x6 1x8 and 1x5 is working fine for me see here

/vbb/showthread...69#post3102269

but most of phones have 1x6 conector type so team u have to do more work on this conector type i hopw u recover this point soon

best of luck in advance

joni_rajpura · 02-20-2008, 13:35

cect k300 1x12 pins

software version: 1.05
searching adapter at COM3...
adapter found, version: 2000
pins: 12
power cycles: 2
activation cycles: 7
power control: via adapter
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
CPU: MT6225
result: Rx:7 Tx:6
time required: 76 sec
Power On !

InfinityHelp · 02-20-2008, 20:47

hello!

please open user manual on last pages.
there you will see correct pinout for all cables.
Please use multimeter and make sure that your 2x6 cable is assembled correctly and have good contact.
also make sure that connector of phone is not dirty.

rasik · 09-17-2008, 03:51

cect k300 rx tx picture urgent

Shakeel_pattoki · 09-17-2008, 16:36

Quote:

Originally Posted by rasik

cect k300 rx tx picture urgent

open phone and see where are printed rx/tx on pcb.

02-20-2008, 13:20	#1 (permalink)
joni_rajpura No Life Poster Join Date: May 2007 Location: uk Posts: 2,642 Member: 508072 Status: Offline Thanks Meter: 1,621	plz team urgent help need still cant able to fine any pin out with 2x6 conector plz team work on this convector type i try with 9-10 phone still cant able to get pinout from any phone connector type 2x6 1x8 and 1x5 is working fine for me see here /vbb/showthread...69#post3102269 but most of phones have 1x6 conector type so team u have to do more work on this conector type i hopw u recover this point soon best of luck in advance

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
plz plz plz urgent help needed	mr.hassouna	HTC & PDA WM( With Touchscreen)	0	04-24-2009 14:28
nspro team urgent help required plz	gsmservices	NSPRO	4	01-25-2009 16:30
urgent help need plz	joni_rajpura	Nokia Hardware & Hardware Repair	3	02-29-2008 06:25
Urgent help needed plz	DigiMOb	BF, BG, TH, BHx Series	3	10-26-2006 18:24
Problem with DreamBox== Urgent Help Needed. Wake up dreambox team	KSM1	DreamBox	6	05-26-2006 14:37

02-20-2008, 13:35	#2 (permalink)
joni_rajpura No Life Poster Join Date: May 2007 Location: uk Posts: 2,642 Member: 508072 Status: Offline Thanks Meter: 1,621	cect k300 1x12 pins software version: 1.05 searching adapter at COM3... adapter found, version: 2000 pins: 12 power cycles: 2 activation cycles: 7 power control: via adapter power-off delay: 20 start Rx/Tx: 1/1 Loading configuration... Initializing... Press and HOLD phone Power button now ! detecting pins... CPU: MT6225 result: Rx:7 Tx:6 time required: 76 sec Power On !

02-20-2008, 20:47	#3 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! please open user manual on last pages. there you will see correct pinout for all cables. Please use multimeter and make sure that your 2x6 cable is assembled correctly and have good contact. also make sure that connector of phone is not dirty.

09-17-2008, 03:51	#4 (permalink)
rasik Major Poster Join Date: Oct 2006 Posts: 49 Member: 367398 Status: Offline Thanks Meter: 1	cect k300 rx tx picture urgent