GSM-Forum - possible to unlock y336-u02

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)

- - possible to unlock y336-u02 (https://forum.gsmhosting.com/vbb/f296/possible-unlock-y336-u02-2152823/)

possible to unlock y336-u02

set always in emergency mode

here is svc mode info

Code:

Operation : Check/Read Info [ v1.22 ]
 

1. Remove battery. Insert battery back

2. Insert cable

3. In case of SVC init problems - connect with hold "VolDown" button!
 

 ====  Wait for phone...
 

Phone found! [ 16 ]

Port Opened

Sync...

InitSvc Done

Wait for phone...

Sync...

Phone Initial Info : 

Platform : MOCORTM_14B_TSHARK28_HUAWEI_W15.30_Debug

Project  : sc7731g_CP0_modem

HWInfo   : sc7731g_CP0_modem

Compile  : 07-20-2015 10:33:15

Phone Security Info : 

IMEI [1] : 869811025342---

IMEI [2] : 86981102534----

BT_ADDR  : 000000000000

SelfInfo : 

BatVoltage : 3.798 V
 

Done
 

Reconnect Power/Cable!

flash mode always error

Code:

SLDR Load Ok

BB CPU  : SC7731

Huawei Y336-U02 (Y3C)
 

For disable SLDR - select PAC or other SLDR or re-select CPU in settings tab!
 

Operation : Check/Read Info [ v1.22 ]
 

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

3. Insert cable
 

 ====  Wait for phone...
 

Phone found! [ 66 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

Boot failed!

                 

Boot failed!
 

Reconnect Power/Cable!

Code:

Operation : Check/Read Info [ v1.22 ]
 

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

3. Insert cable
 

 ====  Wait for phone...
 

Phone found! [ 66 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

Boot failed!

Loader start failed! Wrong Model selection!

Boot failed!
 

Reconnect Power/Cable!
 
 

Operation : Check/Read Info [ v1.22 ]
 

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

3. Insert cable
 

 ====  Wait for phone...
 

Phone found! [ 66 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

Boot failed!

Loader start failed! Wrong Model selection!

Boot failed!
 

Reconnect Power/Cable!

Hello. Those phones doesn't have lock. They have personalization. Try flash different FW version. Probably, some, will give result.

Flash mode boot not work
Always show error

Quote:

Originally Posted by alamgir80 (Post 12192702)

Flash mode boot not work
Always show error

Hello,
Use latest version currently v1.24 and post result.

ok sir see log and see another one thread on this forum

Code:

SLDR Load Ok

BB CPU  : SC7731

Huawei Y336-U02 (Y3C)
 

For disable SLDR - select PAC or other SLDR or re-select CPU in settings tab!
 

Operation : Check/Read Info [ v1.24 ]
 

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

3. Insert cable
 

 ====  Wait for phone...
 

Phone found! [ 118 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

Boot failed!

                 

Boot failed!
 

Reconnect Power/Cable!

Quote:

Originally Posted by alamgir80 (Post 12192872)

and what u say about this...how could i done this??

Code:

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

3. Insert cable
 

 ====  Wait for phone...
 

Phone found! [ 44 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : Spreadtrum Boot Block version 1.1

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!
 

FLASH : eMMC Flash , Structure : Ok!
 

Reading extended info ... 
 

Model Name  : Y336-U02

Model Brand : HUAWEI

Model Device: HWY336-U

AndrVersion : 4.4.2

BaseBand CPU: Y336-U02

CompileDate : 07/08/2015 12:09:39 PM

Project Ver : Y336-U02V100R001C567B111

Model Ext   : HUAWEI Y336-U02
 

ExtraInfo : HWInfo not exists, normal phone
 

Elapsed: 00:00:14

Read Firmware

Code:

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

3. Insert cable
 

 ====  Wait for phone...
 

Phone found! [ 44 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : Spreadtrum Boot Block version 1.1

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!
 

FlashMode Set : Ok!

Detected eMMC Flash , Structure detect Ok!
 

[FW_READER] : Step #1 Passed!

[FW_READER] : Step #2 Passed!

[FW_READER] : Step #3 Passed!
 

Phone found! [ 44 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : Spreadtrum Boot Block version 1.1

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!
 
 
 

Model Name  : Y336-U02

Model Brand : HUAWEI

Model Device: HWY336-U

AndrVersion : 4.4.2

BaseBand CPU: Y336-U02

Project Ver : Y336-U02V100R001C567B111

Model Ext   : HUAWEI Y336-U02
 

[Read Mode] : HSUSB : 0x3000
 

[FW_READER] : Reading Firmware Now ... 
 

[Read Ok] : u-boot-spl-16k.bin

[Read Ok] : u-boot.bin

[Read Ok] : dlstat.bin

[Read Ok] : prodnv.img

[Read Ok] : sc7731g_CP0_modem.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : nvitem_w.bin

[Read Ok] : logo_480x800.bin

[Read Ok] : fblogo_480x800.bin

[Read Ok] : boot.img

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : recovery.img

[Read Ok] : sysinfo.bin

[Read Ok] : custom.bin

[Read Ok] : globalinfo.bin

[Read Ok] : userdata.img
 

AndroidInfo created

Firmware Size : 1400 MiB

Saved to : C:\Program Files\InfinityBox\CM2SPD\Flash\Y336-U02_HWY336-U_4.4.2_Y336-U02V100R001C567B111_HUAWEI_Y336-U02\

Done!

Quote:

Originally Posted by danishalnoor (Post 12193366)

and what u say about this...how could i done this??

it's not complete log
Mybe old security phone and old log.