problem trying to unlock coral620 - GSM-Forum

denisirias · 07-01-2009, 01:51

dear friends i tried to unlock coral620 without success i dont know if i got wrong pinout since in soft there is not pinout
i tried to open phone and check if it is indicated in board but nothing here is log of my operation

COM9 [VCP0] selected
module v2.79
Action: unlock
unlock method: smart fast
Model: Coral-620
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
error: boot initialization step #3 failed: 01
error: boot initialization step #3 failed: 00
9600 autodetect
error: boot phase #2/2 failed
Can not initialize test mode !
Possible reasons:
1. communication fault, repeat required operation
2. ffs/eeprom is serious damaged, use repair ffs/eeprom files or use other unlock/format method
error: operation failed !
Finished, time used: 7 sec
Remove/Install battery now !

can somebody give me right pinout i have tried all pinouts i found in this forum but all are uncomplete, i need to know right pinout rx, tx and gnd

CELLTOWN · 07-01-2009, 13:59

still waiting for your help

denisirias · 07-01-2009, 16:07

still waiting for support

denisirias · 07-01-2009, 19:11

nevermind i already find pinout my self
thanks anyway

**InfinitySupport** · 07-01-2009, 20:24

Quote:

Originally Posted by denisirias

nevermind i already find pinout my self
thanks anyway

Hello,

Please, post here your pinout so we will compare pinout given by Shell with your pinout.

**InfinitySupport** · 07-01-2009, 20:26

Quote:

Originally Posted by CELLTOWN

still waiting for your help

Hello,

Please, explain your problem little bit more detailed.

07-01-2009, 01:51	#1 (permalink)
denisirias No Life Poster Join Date: Jul 2006 Location: DAVIE FLORIDA Posts: 1,629 Member: 309299 Status: Offline Thanks Meter: 259	problem trying to unlock coral620 dear friends i tried to unlock coral620 without success i dont know if i got wrong pinout since in soft there is not pinout i tried to open phone and check if it is indicated in board but nothing here is log of my operation COM9 [VCP0] selected module v2.79 Action: unlock unlock method: smart fast Model: Coral-620 Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! error: boot initialization step #3 failed: 01 error: boot initialization step #3 failed: 00 9600 autodetect error: boot phase #2/2 failed Can not initialize test mode ! Possible reasons: 1. communication fault, repeat required operation 2. ffs/eeprom is serious damaged, use repair ffs/eeprom files or use other unlock/format method error: operation failed ! Finished, time used: 7 sec Remove/Install battery now ! can somebody give me right pinout i have tried all pinouts i found in this forum but all are uncomplete, i need to know right pinout rx, tx and gnd

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I have a problem trying to unlock A2 z750	yurais	Universalbox	5	11-18-2008 23:34
problem trying to unlock always	tito millo	MT-BOX	5	10-31-2007 03:42
Problems trying to unlock nokia 6125 v4.20	Racionais	BB5BOX	0	10-27-2007 17:27
Found some problems trying to unlock Zv10...	luskao	UST Pro II	16	05-17-2006 15:20
Problem trying to unlock a GX30 !	Patrick	Sharp	4	03-22-2005 10:23

07-01-2009, 13:59	#2 (permalink)
CELLTOWN Crazy Poster Join Date: Apr 2009 Posts: 51 Member: 1010671 Status: Offline Thanks Meter: 15	still waiting for your help

07-01-2009, 16:07	#3 (permalink)
denisirias No Life Poster Join Date: Jul 2006 Location: DAVIE FLORIDA Posts: 1,629 Member: 309299 Status: Offline Thanks Meter: 259	still waiting for support

07-01-2009, 19:11	#4 (permalink)
denisirias No Life Poster Join Date: Jul 2006 Location: DAVIE FLORIDA Posts: 1,629 Member: 309299 Status: Offline Thanks Meter: 259	nevermind i already find pinout my self thanks anyway