GSMSERVER GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 07-31-2020, 18:14   #1 (permalink)
No Life Poster
 
biochemistali's Avatar
 
Join Date: Oct 2005
Location: P A K I S T A N
Age: 13
Posts: 1,325
Member: 190344
Status: Offline
Thanks Meter: 268
qmobile model smart view frp not done


FRp not done....mobile is still on FRP
Code:
Card found : 10AAF75B , v0144
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.05

Load IDBase v42913 Ok!


Operation : Identify [ v2.05 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
ERROR : FDL NOT started!

Error : Fail to boot FDL!
Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!

Operation : Identify [ v2.05 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : v800-user 9 PPR1.180610.011 64 release-keys
MemoryInfo : EMMC :  32 GB  ;  DRAM : 2 GB

Platform Version: MOCORTM_18B_W19.08.1_P10_Debug
Project Version:   sharkl3_pub
BASE  Version:    FM_BASE_18B_W19.08.1_P10
HW Version:        sc9863A_modem
CMP_Time : 04-12-2019 16:35:43

MODEM TAG : MOCORTM_18B_W19.08.1_P10_Debug_FM_BASE_18B_W19.08.1_P10_sc9863A_modem_sharkl3_pub



Done!
Elapsed: 00:02:00

Operation : Format FS / Reset Settings [ v2.05 ]
Mode : Reset FRP
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 


Device not found!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Format FS / Reset Settings [ v2.05 ]
Mode : Reset FRP
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

Wipe Ok : UserData

Reconnect Power/Cable!


Done!
Elapsed: 00:00:41

Operation : Format FS / Reset Settings [ v2.05 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 


Device not found!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Format FS / Reset Settings [ v2.05 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 


Device not found!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Read PrivacyLock [ v2.05 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Read PrivacyLock [ v2.05 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Read PrivacyLock [ v2.05 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 


Device not found!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Read PrivacyLock [ v2.05 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_2GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
ERROR : FDL NOT started!

Error : Fail to boot FDL!
Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!

Operation : Read PrivacyLock [ v2.05 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Format FS / Reset Settings [ v2.05 ]
Mode : Reset FRP
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 

Unknow Error!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Identify [ v2.05 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 

Unknow Error!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Identify [ v2.05 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 

Unknow Error!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Identify [ v2.05 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 

Unknow Error!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Format FS / Reset Settings [ v2.05 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 


Device not found!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Format FS / Reset Settings [ v2.05 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

Wipe Ok : UserData

Reconnect Power/Cable!


Done!
Elapsed: 00:00:39

Operation : Read PrivacyLock [ v2.05 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Read PrivacyLock [ v2.05 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 


Device not found!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Read PrivacyLock [ v2.05 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Read PrivacyLock [ v2.05 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Read PrivacyLock [ v2.05 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Format FS / Reset Settings [ v2.05 ]
Mode : Reset FRP
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 


Device not found!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Format FS / Reset Settings [ v2.05 ]
Mode : Reset FRP
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 

Unknow Error!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Format FS / Reset Settings [ v2.05 ]
Mode : Reset FRP
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 

Unknow Error!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Format FS / Reset Settings [ v2.05 ]
Mode : Reset FRP
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 

Unknow Error!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Format FS / Reset Settings [ v2.05 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Format FS / Reset Settings [ v2.05 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Identify [ v2.05 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : v800-user 9 PPR1.180610.011 64 release-keys
MemoryInfo : EMMC :  32 GB  ;  DRAM : 2 GB

Platform Version: MOCORTM_18B_W19.08.1_P10_Debug
Project Version:   sharkl3_pub
BASE  Version:    FM_BASE_18B_W19.08.1_P10
HW Version:        sc9863A_modem
CMP_Time : 04-12-2019 16:35:43

MODEM TAG : MOCORTM_18B_W19.08.1_P10_Debug_FM_BASE_18B_W19.08.1_P10_sc9863A_modem_sharkl3_pub



Done!
Elapsed: 00:00:45

Operation : Format FS / Reset Settings [ v2.05 ]
Mode : Reset FRP
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

Wipe Ok : UserData

Reconnect Power/Cable!


Done!
Elapsed: 00:00:40

Operation : Format FS / Reset Settings [ v2.05 ]
Mode : Forced [ Format FS / Fix ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

Wipe Ok : UserData

Reconnect Power/Cable!


Done!
Elapsed: 00:00:43

Operation : Format FS / Reset Settings [ v2.05 ]
Mode : Reset FRP
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

Wipe Ok : UserData

Reconnect Power/Cable!


Done!
Elapsed: 00:00:39

Operation : Read PrivacyLock [ v2.05 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Read PrivacyLock [ v2.05 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Read PrivacyLock [ v2.05 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Format FS / Reset Settings [ v2.05 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

Wipe Ok : UserData

Reconnect Power/Cable!


Done!
Elapsed: 00:00:45
  Reply With Quote
Old 08-01-2020, 08:37   #2 (permalink)
No Life Poster
 
Yusuf Lawal's Avatar
 
Join Date: Oct 2011
Location: Nigeria
Posts: 5,851
Member: 1677653
Status: Offline
Thanks Meter: 2,255
Donate money to this user
Select correct boot and retry.

Your device info below:
MemoryInfo : EMMC : 32 GB ; DRAM : 2 GB

HW Version: sc9863A_modem
  Reply With Quote
Old 08-02-2020, 08:58   #3 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Posts: 16,690
Member: 462970
Status: Offline
Thanks Meter: 16,917
Probably, Wiko -> SC9863x_eMMC_3GB_RS
Will work. They both share same V800 project.

Use FLASH mode , instead SVC. Follow software instruction, not waste time by smashing buttons.
  Reply With Quote
The Following 3 Users Say Thank You to JayDi For This Useful Post:
Show/Hide list of the thanked
Old 08-05-2020, 11:38   #4 (permalink)
No Life Poster
 
biochemistali's Avatar
 
Join Date: Oct 2005
Location: P A K I S T A N
Age: 13
Posts: 1,325
Member: 190344
Status: Offline
Thanks Meter: 268
FRP done qmobile view smart

Quote:
Originally Posted by JayDi View Post
Probably, Wiko -> SC9863x_eMMC_3GB_RS
Will work. They both share same V800 project.

Use FLASH mode , instead SVC. Follow software instruction, not waste time by smashing buttons.
Card found : 10AA**** , v0144
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.05

Load IDBase v42913 Ok!


Operation : Format FS / Reset Settings [ v2.05 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Wiko : SC7731E_eMMC_512MB_RS
Sending Init Boot ...
ERROR : FDL Start Failed!

Error : Fail to boot FDL!
Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!

Operation : Format FS / Reset Settings [ v2.05 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Format FS / Reset Settings [ v2.05 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Wiko : SC9863x_eMMC_3GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : FRP

Reconnect Power/Cable!


Done!
Elapsed: 00:01:05
  Reply With Quote
The Following User Says Thank You to biochemistali For This Useful Post:
Old 08-09-2020, 07:26   #5 (permalink)
No Life Poster
 
biochemistali's Avatar
 
Join Date: Oct 2005
Location: P A K I S T A N
Age: 13
Posts: 1,325
Member: 190344
Status: Offline
Thanks Meter: 268
@ JayDi
Dear Sir is there any way to repair imei of this phone as i cannot see any related option to service imei repair
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 11:48.



Powered by Searchlight © 2020 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.59622 seconds with 7 queries

SEO by vBSEO