09-20-2021, 11:07
|
#3 (permalink)
|
| No Life Poster
Join Date: Apr 2005 Location: ALGERIA Age: 42
Posts: 612
Member: 135661
Status: Offline Thanks Meter: 92 | same Quote:
Operation : Flash Firmware [ v2.13 ]
Setting : Update NVRAM : True
Setting : Force NVRAM : True
Setting : Update PMT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : S19610AA1_ctcc-user-native_SHARKL5PRO_SUPER_R.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
PMTMng : Load PMT
PMTMng : 0x4C
PMTMng : Update PMT Ok!
NVRM : sharkl5pro_pubcp_SPA_nvitem.bin
NVMng : Load 0x36
NVMng : Init SRC
NVMng : SecurityInfo
IMEI[1] : 86899XXXXXXXXX
IMEI[2] : 86899XXXXXXXXX
IMEI[3] : 867400020316638
SEC : SLS:0, SKS:0, SKV:4
NVMng : Backup Ok , 0x000D9D48
NVMng : Init DST
NVMng : Rx34 : Wx33
NVMng : NVM block updated!
Prepare target ...
Prepare Ok!
FSIMG : cache.img
CODE : gnssmodem.bin
CODE : teecfg-sign.bin
CODE : vbmeta_system.img
CODE : vbmeta_system_ext.img
CODE : sharkl5pro_pubcp_SPA_AGCP_DSP.bin
CODE : sharkl5pro_pubcp_SPA_CDMA_DSP.bin
CODE : boot.img
FSIMG : socko.img
FSIMG : userdata.img
CODE : realme_hdplus_720_1600.bmp
CODE : tos-sign.bin
CODE : sharkl5pro_pubcp_SPA_LTEA_DSP.bin
CODE : sml-sign.bin
CODE : SC9600_sharkl5pro_pubcp_SPA_modem.dat
ERASE : UBOOT_LOG
FSIMG : super.img
CODE : vbmeta_vendor.img
CODE : EXEC_KERNEL_IMAGE.bin
CODE : sharkl5pro_pubcp_SPA_DM_DSP.bin
CODE : dtbo.img
UBOOT : u-boot-spl-16k-sign.bin
ERASE : METADATA
CODE : sharkl5pro_pubcp_SPA_deltanv.bin
FSIMG : persist.img
CODE : vbmeta_product.img
ERASE : SYSDUMPDB
CODE : vbmeta-sign.img
ERASE : L_RUNTIMENV1
CODE : sharkl5pro_cm4_spaxy.bin
CODE : prodnv.img
ERASE : MISC
CODE : logo.bin
UBOOT : u-boot-sign.bin
FSIMG : odmko.img
Flashing finished!
Reconnect Power/Cable!
Done!
Elapsed: 00:10:39
| and repair again Quote:
Operation : Repair Security [ v2.13 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : S19610AA1_ctcc-user-native_SHARKL5PRO_SUPER_R.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
NVMng : SecurityInfo
IMEI[1] : 86899XXXXXXXXX
IMEI[2] : 86899XXXXXXXXX
IMEI[3] : 867400020316638
SEC : SLS:0, SKS:0, SKV:4
New SecInfo :
IMEI[1] : 86899XXXXXXXXX
IMEI[2] : 86899XXXXXXXXX
NVMng : Item updated!
NVMng : Post-Process Ok!
NVMng : SecurityInfo
IMEI[1] : 86899XXXXXXXXX
IMEI[2] : 86899XXXXXXXXX
IMEI[3] : 867400020316638
SEC : SLS:0, SKS:0, SKV:4
New SecInfo :
IMEI[1] : 86899XXXXXXXXX
IMEI[2] : 86899XXXXXXXXX
NVMng : Item updated!
NVMng : Post-Process Ok!
Done!
Elapsed: 00:00:21
| in diag mode Quote:
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : S19610AA1_ctcc-user 11 RP1A.201005.001 22521 release-keys
NVMng : SecurityInfo
IMEI[1] : 86899XXXXXXXXX
IMEI[2] : 86899XXXXXXXXX
WIFIMAC : 000000000000
BT_MAC : 000000000000
SEC : SLS:0, SKS:0, SKV:4
New SecInfo :
IMEI[1] : 86899XXXXXXXXX
IMEI[2] : 86899XXXXXXXXX
NVMng : Security data updated!
Done!
Elapsed: 00:00:25
|
Last edited by zaki_barika; 09-20-2021 at 11:12.
|
|
|  |
Linear Mode
