GSM-Forum - [SC7731] Selecline S6S5IN3G Firmware [Infinity PAC.SC]

[SC7731] Selecline S6S5IN3G Firmware [Infinity PAC.SC]

Model Name : S6S5IN3G
Model Brand : SELECLINE
Model Device: S6S5IN3G
AndrVersion : 6.0
BaseBand CPU: S6S5IN3G
Project Ver : 877947_V1.2_20170322
Model Ext : S6S5IN3G

Code:

Operation : Read FullFlash [ v1.27 ]
 

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 

3. Insert cable
 

Phone found! [ 32 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SPRD 773x eMMC loader v3 Infinity

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!
 

Model Name  : S6S5IN3G

Model Brand : SELECLINE

Model Device: S6S5IN3G

AndrVersion : 6.0

BaseBand CPU: S6S5IN3G

Project Ver : 877947_V1.2_20170322

Model Ext   : S6S5IN3G
 

[Read Mode] : HSUSB : 0x3000
 

[FW_READER] : Reading Firmware Now ... 
 

[Read Ok] : u-boot-spl-16k.bin

[Read Ok] : u-boot.bin

[Read Ok] : prodnv.img

[Read Ok] : sc7731g_CP0_modem.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : nvitem_w.bin

[Read Ok] : sc8830g_modem_CP2_WCN_14D_W17.14.5_Release.bin

[Read Ok] : nvitem_wcn.bin

[Read Ok] : logo_480x854.bin

[Read Ok] : fblogo_480x854.bin

[Read Ok] : boot.img

[Read Ok] : system.img

[Read Ok] : sysinfo.img

[Build Ok] : cache.img

[Read Ok] : recovery.img

[Read Ok] : fbootlogo3.bin

[Read Ok] : fbootlogo4.bin

[Read Ok] : fbootlogo5.bin

[Build Ok] : userdata.img
 

AndroidInfo created

Firmware Size : 2431 MiB

Saved to : D:\S6S5IN3G_S6S5IN3G_6.0_877947_V1.2_20170322_S6S5IN3G\

Done!
 

Elapsed: 00:17:43
 

Reconnect Power/Cable!