SCR/RDA first job - GSM-Forum

yuranc8 · 12-16-2017, 10:55

Code:

Card found : 5****** , v0136
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.01
 SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR
 
Operation : Identify [ v1.01 ]
 ----- > Powered On : 
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off : 
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!
 Wait for device ... 
 Device Connected!
BOOT_PWR0 : 0x00600000
BOOT_INIT : 0x81C0024C
BOOT_MODE : DOWNLOAD
Setting BOOTROM mode
BOOT_MODE : BOOTROM
Boot_CPU  : 0x88094009 : [RDA] : RDA8851CL
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x161660C8 : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV  : 0xFBA2A2E0
Boot done!
 Identify : Code Integrity Check pass!
 Device Info Details : 
[0] : H3_88x9CL_v1d0_guangliansheng_co71_itfly_qqvga
[1] : 8809
[2] : CT8851C
[3] : pasw_rda6625
[4] : flsh_spi32m
[5] : gc9102_sc_hguang_160_128_h3_glsheng
[6] : sp0820_sbke_h3_glsheng/bf3a01_hh_h18_mke
[7] : rdabt_8809
[8] : rdafm_8809
[9] : 20160729Fri2128
[10] : H3_GUANGLS_CO71_160X128_ITFLY_Eng_Ara_Fre_Por_32m_v1.05_c01_20160729
inf_usb-dll:err [_usb_read_async] timeout error
 
Done!
Elapsed: 00:03:14
 Reconnect Power/Cable!
 Operation : Reset Settings [ v1.01 ]
----- > Powered On : 
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off : 
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!
 Wait for device ... 
 Device Connected!
BOOT_PWR0 : 0x00600000
BOOT_INIT : 0x81C0024C
BOOT_MODE : DOWNLOAD
Setting BOOTROM mode
 Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!
 Reconnect Power/Cable!
 Card found : 5C203D37 , v0136
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.01
 SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR
 
Operation : Read Flash [ v1.01 ]
 ----- > Powered On : 
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off : 
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!
 Wait for device ... 
 Device Connected!
BOOT_PWR0 : 0x00600000
BOOT_INIT : 0x81C0024C
BOOT_MODE : DOWNLOAD
Setting BOOTROM mode
 Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!
 Reconnect Power/Cable!

Now RDA Module

Code:

========================= Start ========================= 
                 16-12-2017 / 11:37:14
========================================================= 
Card found : S/N : 5******* , v0136
Chinese Miracle II [RDA module] v 1.05

Code:

 Start  at : [16-12-2017 / 11:37:51]
Operation : Read User Code
Waiting phone ... 
Connect battery, press and hold '0' button
Connect USB cable and keep hold button, until phone will be detected
Init  : 679DAAA0
Settings registers ... 
1st boot Ok
==== CPU
CPU_ID : 8809 , rev : 4009
CPU_CN : RDA Micro CT , RDA8851X
==== FLASH
FL_VEN : 60C8 , rev : 1600
FL_CNM : GigaDevice , GD25Q32
FL_CAP : 00400000
Initial : 81C0024C
==== Booting
Sending RamRun Loader ...
Set : 8809 , 00400000
Use : 8809_00400000_usb.fp
Sending HdrConf ... 
Sending LdrData ... 
Loader sent, starting...
Flush : 0400F000
Loader run
Boot Done!
 Read UDA now , wait ...
Read done, sorting EXTData
Following items found : 
Item : WAP_MM
Item : CSW
Item : NVRAM
Required data found, extracting code
 UserCode : 1978
 Elapsed: 00:00:24
Done
Reconnect Power/Cable!
 Finish at : [16-12-2017 / 11:38:17]
 Start  at : [16-12-2017 / 11:40:00]
Operation : Check Device / Info
======= Settings
Settings : Read AllInfo is Off
Settings : Full Boot disabled by default
 Waiting phone ... 
Connect battery, press and hold '0' button
Connect USB cable and keep hold button, until phone will be detected
Init  : 679DAAA0
Settings registers ... 
1st boot Ok
==== CPU
CPU_ID : 8809 , rev : 4009
CPU_CN : RDA Micro CT , RDA8851X
==== FLASH
FL_VEN : 60C8 , rev : 1600
FL_CNM : GigaDevice , GD25Q32
FL_CAP : 00400000
Initial : 81C0024C
Boot Done!
 Elapsed: 00:00:33
Done
Reconnect Power/Cable!
 Finish at : [16-12-2017 / 11:40:33]
 Start  at : [16-12-2017 / 11:41:15]
Operation : Read FullFlash
======= Settings
Settings : SafeMode is Off [Fast]
Settings : Make IFF (MCU) file
Settings : Make Calibration file
 Waiting phone ... 
Connect battery, press and hold '0' button
Connect USB cable and keep hold button, until phone will be detected
Init  : 679DAAA0
Settings registers ... 
1st boot Ok
==== CPU
CPU_ID : 8809 , rev : 4009
CPU_CN : RDA Micro CT , RDA8851X
==== FLASH
FL_VEN : 60C8 , rev : 1600
FL_CNM : GigaDevice , GD25Q32
FL_CAP : 00400000
Initial : 81C0024C
==== Booting
Sending RamRun Loader ...
Set : 8809 , 00400000
Use : 8809_00400000_usb.fp
Sending HdrConf ... 
Sending LdrData ... 
Loader sent, starting...
Flush : 0400F000
Loader run
Boot Done!
 Read Flash now ... 
Read Ok, 4194304 bytes read
Verify file...
Project Info : x.
[BIN] Saved as : x..bin
Make FlashFiles
FATNV Check passed
FSCSC Check passed
CALIB Check passed
[IFF] File saved to : C:\InfinityBox\CM2RDA\Flash\IFF\CSD_x._.iff
[CAL] File saved to : C:\InfinityBox\CM2RDA\Flash\IFF\CSD_x._.ifc
Build done
Done
Elapsed: 00:01:07
Finish at : [16-12-2017 / 11:42:22]
Reconnect Power/Cable!

Same device read info in RDA module... Incomplete info...

SCR fail to format....

JayDi · 12-16-2017, 11:38

Fail init protocol - mostly cable or not charged battery problem
Reset power and try again in this case.

12-16-2017, 11:38	#2 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Fail init protocol - mostly cable or not charged battery problem Reset power and try again in this case.