infinity team please help about A898 - GSM-Forum

babaformula · 03-15-2009, 07:37

COM3 [VCP0] selected
module v2.78
Action: touchscreen calibration
mode: 3
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031

76A:FA1C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: LION6_08_26B_HL_L5SM_207_070918_LD-TR0_OV0_SS75_CTF_BT
Version: CKT26_06B_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-3)...
0 1 2 3 4 5 6 7 8 9error:
detection failed (10 tries)
What to do:
Try another calibration method, if still no luck:
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
6. if still no luck read full flash and send to support with subject: touchscreen calibration failed
error: can't read required data
error: operation failed !
Finished, time used: 14 sec
Remove/Install battery now !

i want calibration but have err pls help
i have more flash and ffs formate but problem not solved pls help

deepakgarg · 03-15-2009, 08:29

Quote:

Originally Posted by babaformula

COM3 [VCP0] selected
module v2.78
Action: touchscreen calibration
mode: 3
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031

76A:FA1C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: LION6_08_26B_HL_L5SM_207_070918_LD-TR0_OV0_SS75_CTF_BT
Version: CKT26_06B_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-3)...
0 1 2 3 4 5 6 7 8 9error:
detection failed (10 tries)
What to do:
Try another calibration method, if still no luck:
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
6. if still no luck read full flash and send to support with subject: touchscreen calibration failed
error: can't read required data
error: operation failed !
Finished, time used: 14 sec
Remove/Install battery now !

i want calibration but have err pls help
i have more flash and ffs formate but problem not solved pls help

did u tried all modes 1 2 3 4 5

babaformula · 03-15-2009, 08:48

yes i tried all modes

now i have solve that problem in hardware and phone is ok but
i want know why i have that problem ...becuz infinity is good box
so i hurt from that err.

deepakgarg · 03-15-2009, 09:34

Quote:

Originally Posted by babaformula

yes i tried all modes

now i have solve that problem in hardware and phone is ok but
i want know why i have that problem ...becuz infinity is good box
so i hurt from that err.

u said it was hardware problem than how can it b solved by infinity box???

03-15-2009, 07:37	#1 (permalink)
babaformula Freak Poster Join Date: Sep 2007 Posts: 152 Member: 593491 Status: Offline Thanks Meter: 53	infinity team please help about A898 COM3 [VCP0] selected module v2.78 Action: touchscreen calibration mode: 3 Model: Autodetect 6205-6227 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6226:8A02:8A01]... CPU: MT6226 high speed boot Off chip: 003176A:FA1C status: FF Connecting at 19200, wait... Release Power button now ! Phone detected, wait... Hardware: MT6226,E02 Date: 2005.04.12 Version: 1.0 Version: LION6_08_26B_HL_L5SM_207_070918_LD-TR0_OV0_SS75_CTF_BT Version: CKT26_06B_HW detecting structure #2... 0 done 44 byte(s) read imei: 13579024681122 warning: current phone imei is incorrect ! It's need to repair imei for correct phone functionality ! connection Ok detecting structure #5 (mode-3)... 0 1 2 3 4 5 6 7 8 9error: detection failed (10 tries) What to do: Try another calibration method, if still no luck: 1. make full flash backup for emergency case 2. make "format ffs" 3. Power-On phone 4. Power-Off phone by "Power" button (do NOT remove battery) 5. Repeat "Calibration" operation again 6. if still no luck read full flash and send to support with subject: touchscreen calibration failed error: can't read required data error: operation failed ! Finished, time used: 14 sec Remove/Install battery now ! i want calibration but have err pls help i have more flash and ffs formate but problem not solved pls help

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Infinity Team please help me to activate my pinfinder with my New Infinity Box	NawabN Sahoo	Infinity-Box	3	11-17-2009 13:50
infinity team please help about touch celebration	/\/\A/\/\|	Infinity-Box	14	05-23-2009 01:49
infinity team please help about touch celebration	/\/\A/\/\|	Chinese Models & Cloned Phones	3	04-30-2009 12:22
Infinity Team Please help with my Infinity....	ASHRIFF	Infinity-Box	1	03-10-2008 16:51
infinity team plsssss help about c168i	rk19801	Infinity-Box	3	12-15-2007 21:18

03-15-2009, 08:48	#3 (permalink)
babaformula Freak Poster Join Date: Sep 2007 Posts: 152 Member: 593491 Status: Offline Thanks Meter: 53	yes i tried all modes now i have solve that problem in hardware and phone is ok but i want know why i have that problem ...becuz infinity is good box so i hurt from that err.