SE T668 China Phone Repaired with PINFINITY COMBI - GSM-Forum

alfox · 10-20-2008, 07:07

heres another new type of china phone which was tested with pinfinity combi.as usual problem is auto off when turned on with sim....first use pinfinder to detect the unit then use infinity to do the job.....i shared this since this is new model as shown in my logs "NEW FW DETECTED"...........

pinfinder

Quote:

software version: 1.14
cable type: 1x12 SE (L12A)
platform: MT: MT62xx (autodetect)
searching adapter at COM6...
adapter found, version: 2000
pins: 12, plain
power cycles: 1
activation cycles: 7
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
19200 fixed
CPU: MT6226
result: Rx:6 Tx:10
time required: 32 sec
Power On !

backup

Quote:

COM6 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read NOR flash
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:1541:ECC4
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
error: no any expected answer
error: no any expected answer: wrong answer after chip id request
flash: AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
warning: wrong data size at 0x002C829C, retry...
read error recovered
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.8DFA8BDA.[T6226_05C_PCB01_GPRS_MT6226_S01.A8_SE_VTRAIMF_7670 _V1016A.BIN_E55A5DD5].rpl
====================
New firmware detected:
T6226_05C_PCB01_GPRS_MT6226_S01.A8_SE_VTRAIMF_7670 _V1016A.BIN

- make "Read full flash" operation
- send "system_log_..." file to support: [email protected]
- send flash backup file(s) to support: [email protected]
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: 8DFA8BDA
identification#1 protocol ver: 04
ver. sw1: T6226_05C_PCB01_GPRS_MT6226_S01.A8_SE_VTRAIMF_7670 _V1016A.BIN
ver. sw2: A8_SE_VTRAIMF_7670_V1016A, 2AA2A51A
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading: flash[T6226_05C_PCB01_GPRS_MT6226_S01.A8_SE_VTRAIMF_7670 _V1016A.BIN]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\flash_SET668[T6226_05C_PCB01_GPRS_MT6226_S01.A8_SE_VTRAIMF_7670 _V1016A.BIN]_20081020-122915.B0M.bin
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\s ystem_log_8DFA8BDA_T6226_05C_PCB01_GPRS_MT6226_S01 .A8_SE_VTRAIMF_7670_V1016A.BIN_E55A5DD5_20081020-123743.B0X.bin
Finished, time used: 2414 sec
Remove/Install battery now !

format

Quote:

COM6 [VCP0] selected
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:1541:ECC4
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: A8_SE_VTRAIMF_7670_V1016A
Version:
detecting structure #2...
done
60 byte(s) read
imei: 35226061207033
connection Ok
building list...
done
items to clear: 172
warning: wrong packet cs
warning: wrong packet cs
172 of 172 items cleared
0 items remains
Finished, time used: 33 sec
Remove/Install battery now !

after format restore imei

Quote:

Action: imei
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6226, E02
Software version: A8_SE_VTRAIMF_7670_V
Software date: 2005.04.12
Barcode: MT012345678901234567
imei: 135790246811220
imei write method: mode-1
imei write channel: imei #1 for dual sim/mono-CPU
new imei: 352260612070338
imei verified Ok
Finished, time used: 31 sec
Power off phone now !

new firmware i share here for pinfinity team to add in database.more power

flash_SET668[T6226_05C_PCB01_GPRS_MT6226_S01.A8_SE_VTRAIMF_7670 _V1016A.BIN]_20081020-12291

InfinityHelp · 10-20-2008, 09:53

hello!

thank you for sharing your experience!!
would be nice if you would send this software full backup to [email protected]
or upload to rapidshare.com

alfox · 10-21-2008, 12:33

actually i uploaded it already.pls check my post #1 on the lower part.click the filename coz it contains the back up file for download....

alaamasry · 10-21-2008, 14:27

thank alfox...................

**InfinitySupport** · 10-21-2008, 18:39

@alfox
Thank you very much for test report !

Each test report with attached logs is very important for us so we can see how is Infinity-Box
software works and what is possible problems and successfully done work.

Please, in future upload files to http://rapidshare.com and send files (or links) to [email protected] to avoid lost files.

alfox · 10-24-2008, 02:20

ok thanks for the info and next time il do your request for uploading files....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
>>> SE K610i Red Blink Repaired with TP <<<	zeel_zeel	SETool2	0	10-08-2008 18:11
Vote: Online pinout and China phones repair program _?	osom	Chinese Models & Cloned Phones	1	09-04-2008 12:00
N99 China Phone Repaired With Infinity	alfox	Infinity-Box	7	07-16-2008 11:48
n95 8gb china phone "HANG" repaired with PINFINITY combination	alfox	Infinity-Box	2	06-21-2008 07:14
China Phone Repairing Solutions	cactus	Hardware Repair by brands	1	10-17-2007 22:18

10-20-2008, 09:53	#2 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! thank you for sharing your experience!! would be nice if you would send this software full backup to [email protected] or upload to rapidshare.com

10-21-2008, 12:33	#3 (permalink)
alfox No Life Poster Join Date: Nov 2004 Location: Pinas Age: 45 Posts: 1,412 Member: 91411 Status: Offline Sonork: 100.1584444 Thanks Meter: 372	actually i uploaded it already.pls check my post #1 on the lower part.click the filename coz it contains the back up file for download....

10-21-2008, 14:27	#4 (permalink)
alaamasry Freak Poster Join Date: May 2005 Age: 48 Posts: 100 Member: 146406 Status: Offline Thanks Meter: 3	thank alfox...................

10-21-2008, 18:39	#5 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	@alfox Thank you very much for test report ! Each test report with attached logs is very important for us so we can see how is Infinity-Box software works and what is possible problems and successfully done work. Please, in future upload files to http://rapidshare.com and send files (or links) to [email protected] to avoid lost files.

10-24-2008, 02:20	#6 (permalink)
alfox No Life Poster Join Date: Nov 2004 Location: Pinas Age: 45 Posts: 1,412 Member: 91411 Status: Offline Sonork: 100.1584444 Thanks Meter: 372	ok thanks for the info and next time il do your request for uploading files....