SFR132 succes unlock(first in the word with infinity)... - GSM-Forum

chimed09 · 01-08-2012, 22:01

Unlock solution for Sfr 132 with MModule and phone must be turned on:

1-open MModule and select MT6253 NOR

2- put this imei: 861993000252001 in imei tab and press write

3- turn on phone with non accepted sim card and put this code when ask: 754993252257

4- Phone is unlocked and now just restore original imei

And thanks for Mr Malcom®(BootBox) for FREEEEE code NCK :http://forum.gsmhosting.com/vbb/8048214-post55.html

TESTED WITH 2 PHONE SFR132

LOG :

Code:

Action: read/check information Model: _Autodetect MT6253 NOR Checking data, wait... Phone should be Switched ON ! Connecting, wait... Phone detected, wait... Hardware version: MT6252" Hardware version: AT+EGMR=0,4 Software version: AT+EGMR=0,3 Software date: AT+EGMR=0,1 Barcode: AT+EGMR=0,5 Finished, time used: 18 sec Remove/Install battery now ! Action: "repair imei" Model: _Autodetect MT6253 NOR Checking data, wait... Phone should be Switched ON ! Connecting, wait... Phone detected, wait... imei-1: 861993000196695 imei write method: mode-1 imei write channel: imei #1 for dual sim/mono CPU new imei-1: 861993000252001 verification Ok Finished, time used: 4 sec Remove/Install battery now !

LOG :

Code:

Action: "repair imei" Model: _Autodetect MT6253 NOR Checking data, wait... Phone should be Switched ON ! Connecting, wait... Phone detected, wait... imei-1: 861993000195077 imei write method: mode-1 imei write channel: imei #1 for dual sim/mono CPU new imei-1: 861993000252001 verification Ok Finished, time used: 25 sec Remove/Install battery now !

chimed09 · 01-08-2012, 22:26

And this is pinout SFR132 :

RX= pine 3

TX= pine 7

smart_clip · 01-09-2012, 11:00

my first one....... ok
thanks chimed

Code:

Action: "repair imei"
Model: _Autodetect MT6253 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
imei-1: 861993000470181
imei write method: mode-1
imei write channel: imei #1 for dual sim/mono CPU
new imei-1: 861993000252001
verification Ok
Finished, time used: 13 sec
Remove/Install battery now !
Action: "repair imei"
Model: _Autodetect MT6253 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
imei-1: 861993000252001
imei write method: mode-1
imei write channel: imei #1 for dual sim/mono CPU
new imei-1: 861993000470181
verification Ok
Finished, time used: 26 sec
Remove/Install battery now !

JAVA Good · 01-09-2012, 12:22

tks to all, but this solution work if the unlocking counter is blocked ?

Best Regards,
JAVA Good.

smart_clip · 01-09-2012, 12:42

Quote:

Originally Posted by JAVA Good

tks to all, but this solution work if the unlocking counter is blocked ?

Best Regards,
JAVA Good.

make a backup first , then full format/ ffs complet mode and try to enter unlock code

chimed09 · 01-09-2012, 13:35

Quote:

Originally Posted by smart_clip

make a backup first , then full format/ ffs complet mode and try to enter unlock code

yes format ffs and try to enter unlock code...Tested

JAVA Good · 01-09-2012, 13:48

ok ok, tks for all,

Best Regards,
JAVA Good.

chimed09 · 01-09-2012, 17:03

(first in the word with infinity)

with cable not calcul

ps:and thx for FREEEE code.

keeran · 01-11-2012, 20:44

Which cable can use for this model?

chimed09 · 01-12-2012, 14:26

Quote:

Originally Posted by keeran

Which cable can use for this model?

http://forum.gsmhosting.com/vbb/8055971-post2.html

souraya · 01-16-2012, 23:52

Do YOU tel us witch cable please;,,,,???

dal-iss · 01-17-2012, 10:28

Quote:

Originally Posted by souraya

Do YOU tel us witch cable please;,,,,???

i tested pinout pin03 rx and pin07 tx and dont work ,is there any one explaine more how to sold pin cable to pin fone please

chimed09 · 01-17-2012, 19:36

Quote:

Originally Posted by dal-iss

i tested pinout pin03 rx and pin07 tx and dont work ,is there any one explaine more how to sold pin cable to pin fone please

you need TX and RX and GND ...

meddec · 01-17-2012, 20:54

how to remove pelase wait? i try to format it but no connection
please help me

RCB Telecom · 01-19-2012, 04:49

Quote:

Originally Posted by chimed09

Unlock solution for Sfr 132 with MModule and phone must be turned on:

1-open MModule and select MT6253 NOR

2- put this imei: 861993000252001 in imei tab and press write

3- turn on phone with non accepted sim card and put this code when ask: 754993252257

4- Phone is unlocked and now just restore original imei

And thanks for Mr Malcom®(BootBox) for FREEEEE code NCK :http://forum.gsmhosting.com/vbb/8048214-post55.html

TESTED WITH 2 PHONE SFR132

LOG :

Code:

Action: read/check information Model: _Autodetect MT6253 NOR Checking data, wait... Phone should be Switched ON ! Connecting, wait... Phone detected, wait... Hardware version: MT6252" Hardware version: AT+EGMR=0,4 Software version: AT+EGMR=0,3 Software date: AT+EGMR=0,1 Barcode: AT+EGMR=0,5 Finished, time used: 18 sec Remove/Install battery now ! Action: "repair imei" Model: _Autodetect MT6253 NOR Checking data, wait... Phone should be Switched ON ! Connecting, wait... Phone detected, wait... imei-1: 861993000196695 imei write method: mode-1 imei write channel: imei #1 for dual sim/mono CPU new imei-1: 861993000252001 verification Ok Finished, time used: 4 sec Remove/Install battery now !

LOG :

Code:

Action: "repair imei" Model: _Autodetect MT6253 NOR Checking data, wait... Phone should be Switched ON ! Connecting, wait... Phone detected, wait... imei-1: 861993000195077 imei write method: mode-1 imei write channel: imei #1 for dual sim/mono CPU new imei-1: 861993000252001 verification Ok Finished, time used: 25 sec Remove/Install battery now !

congrats sir.........................

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to add a language in 51xx/61xx	tati	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	05-21-2013 19:20
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29
how the **** do i make wintesla 6.03 work	Ravetrancer	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	06-16-1999 08:41
Netmonitor with FBus????	ratzfatz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	06-09-1999 17:04

01-09-2012, 12:22	#4 (permalink)
JAVA Good No Life Poster Join Date: May 2004 Age: 54 Posts: 2,440 Member: 66136 Status: Offline Thanks Meter: 200	tks to all, but this solution work if the unlocking counter is blocked ? Best Regards, JAVA Good.

01-09-2012, 13:48	#7 (permalink)
JAVA Good No Life Poster Join Date: May 2004 Age: 54 Posts: 2,440 Member: 66136 Status: Offline Thanks Meter: 200	ok ok, tks for all, Best Regards, JAVA Good.

01-09-2012, 17:03	#8 (permalink)
chimed09 No Life Poster Join Date: Mar 2007 Location: TUNISIA Age: 41 Posts: 1,243 Member: 479816 Status: Offline Thanks Meter: 851	(first in the word with infinity) with cable not calcul ps:and thx for FREEEE code.

01-11-2012, 20:44	#9 (permalink)
keeran Freak Poster Join Date: Dec 2007 Posts: 447 Member: 666861 Status: Offline Thanks Meter: 19	Which cable can use for this model?

01-16-2012, 23:52	#11 (permalink)
souraya Major Poster Join Date: Feb 2008 Location: PARIS Posts: 43 Member: 710952 Status: Offline Sonork: e-Mobile Thanks Meter: 2	Do YOU tel us witch cable please;,,,,???

01-17-2012, 20:54	#14 (permalink)
meddec Freak Poster Join Date: May 2004 Posts: 108 Member: 66354 Status: Offline Thanks Meter: 15	how to remove pelase wait? i try to format it but no connection please help me