GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box
Reload this Page Successfully unlocked/repaired phones by Infinity-Box
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source


Reply
Page 4815 of 5072 « First 38154315471547654805481248134814 4815 481648174818482548654915 Last »
 
LinkBack Thread Tools Display Modes
Old 09-30-2022, 06:27   #72211 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Sindh Pakistan
Posts: 8,871
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 15,420
Smile Qmobile : XLi

Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Qmobile : XLi
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP

Reconnect Power/Cable!

Done!
Elapsed: 00:05:35
  Reply With Quote
Old 09-30-2022, 06:58   #72212 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Sindh Pakistan
Posts: 8,871
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 15,420
Smile TECNO : KG5k
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : TECNO : KG5k
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP

Reconnect Power/Cable!

Done!
Elapsed: 00:00:16
  Reply With Quote
Old 09-30-2022, 08:29   #72213 (permalink)
No Life Poster
 
Luckey1's Avatar
 
Join Date: Jun 2014
Location: Infinity Box Team
Posts: 2,157
Member: 2197212
Status: Offline
Sonork: N/A
Thanks Meter: 680
Vgotel i252 read user code done
Operation : Read UserCode [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 3 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : F72828FA1D70D5BE68FDA34C64D92E84
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , [MXIC] MX25L3291FWJI_09
[0] : FLASH_DIE : 00C2 0020 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

Read ExtData
Sorting ExtData
Reading UserCode

Active : Yes , Code : 9852

Privacy Lock :=

Done!
Elapsed: 00:00:05
Reconnect Power/Cable!
  Reply With Quote
Old 09-30-2022, 09:29   #72214 (permalink)
No Life Poster
 
tayobjoy1's Avatar
 
Join Date: Aug 2020
Location: Mozambique
Age: 20
Posts: 967
Member: 2965136
Status: Offline
Sonork: 58846
Thanks Meter: 1,202
Nokia 105 4G TA-1385 SP Unlock Done
Code:
Card found : 46828B86 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Identify [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Platform Version: MOCOR_20A_MP_KN4_W21.30.6_Release
Software Version: 13.00.17.01
BASE     Version: FM_BASE_20A_THIN_MODEM_KN4_W21.30.6
HW       Version: UMS9117
buildtime:08-06-2021 03:48:40
Platform Version: MOCOR_20A_MP_KN4_W21.30.6_Release
BASE     Version: FM_BASE_20A_THIN_MODEM_KN4_W21.30.6
HW       Version: UMS9117

MODEM TAG : MOCOR_20A_MP_KN4_W21.30.6_Release_FM_BASE_20A_THIN_MODEM_KN4_W21.30.6_UMS9117


PSN1 : A93EAABLU
PSN2 : A93EAABLU

NVMng  : SecurityInfo 
IMEI[1] : 358530925171492
IMEI[2] : 358530925671491
WIFIMAC : FFFFFFFFFFFF
BT_MAC  : FFFFFFFFFFFF
SEC : SLS:2, SKS:0, SKV:4


Done!
Elapsed: 00:00:27
Code:
Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Platform Version: MOCOR_20A_MP_KN4_W21.30.6_Release
Software Version: 13.00.17.01
BASE     Version: FM_BASE_20A_THIN_MODEM_KN4_W21.30.6
HW       Version: UMS9117
buildtime:08-06-2021 03:48:40
Platform Version: MOCOR_20A_MP_KN4_W21.30.6_Release
BASE     Version: FM_BASE_20A_THIN_MODEM_KN4_W21.30.6
HW       Version: UMS9117

MODEM TAG : MOCOR_20A_MP_KN4_W21.30.6_Release_FM_BASE_20A_THIN_MODEM_KN4_W21.30.6_UMS9117

NVMng  : SecurityInfo 
IMEI[1] : 358530925171492
IMEI[2] : 358530925671491
WIFIMAC : FFFFFFFFFFFF
BT_MAC  : FFFFFFFFFFFF
SEC : SLS:2, SKS:0, SKV:4

SLStatus : 2C
Status : Locked! Server unlock required!

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 5,  price:5
Process...
Finished

Unlocking device ... 
Sync data ... 
Device unlocked!

Done!
Elapsed: 00:00:39
  Reply With Quote
The Following User Says Thank You to tayobjoy1 For This Useful Post:
Old 09-30-2022, 11:30   #72215 (permalink)
No Life Poster
 
Join Date: Sep 2021
Location: Germany
Posts: 627
Member: 2996196
Status: Offline
Thanks Meter: 632
Thumbs up HUAWEI P20 Pro CLONE READ FIRMWARE DONE
Load IDBase v723487 Ok!

Update configuration...
Socket Error # 11001
Host not found.
Finished

Load IDBase v723487 Ok!
Operation : Identify Device [ v2.35 ]

Mode : FLASH
Deep Info: On
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM5)
MODE : PRELOADER PORT
PORT : 5
Waiting BOOT ack...
PRELOADER : ACK confirmed
BROM : Init BROM
BROM init passed
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM : BROM|BL : 0xFF|0x01
BROM : PRELOADER PORT
Mode: 0 State: 6 Core: 0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA...
BROM : DA sent
BROM : Transfer control to DA...
DA : AGENT started
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 3000011145473430E28E0130BF92E6C7
DAInf: 4 : 2 : 156
DA : DRAM ready
DA : BOOT to 2nd DA...
DA : Receiving HW info

EMMC: CID : 110100303034474530018EE2C7E692BF
EMMC: VEN : TOSHIBA : OEM : 0 : ID : 303034474530 : PRV : 0x01
EMMC: VEN : TOSHIBA : 004GE0
EMMC: SNN : 2397226982 ( 0x8EE2C7E6 ) , MF : 9/2015

EMMC:
BOOT1 : 0x00200000 [ 2.00 MB ]
BOOT2 : 0x00200000 [ 2.00 MB ]
RPMB : 0x00080000 [ 512.00 KB ]
USER : 0xEC000000 [ 3.69 GB ]

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x20000000 [ 512.00 MB ]

CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 3C26D1A636A6963F7A9A9A83FCF4B1A1

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done

Patch Level : LMY47I
Display ID : l100_lyx_h100_welcome_480x960_en_YL_v10
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2017-03-05
Build Time : 26.04.2019
Product Model : P20 Pro
Product Brand : Android
Product Name : P20 Pro
Product Device : P20 Pro
Product Manfct : Android
Board Platform : mt6580
Product Info : aeon6580_weg_l_l100

USERDATA : FILESYSTEM : EXT4

NVRAM : 0x6A02864E
NVRAM : State : Ok
INFO : WiFi MAC : E8D5ED4D8729
INFO : BlTh MAC : 7E4546658011
INFO : IMEI[1] : 358623431991477
INFO : IMEI[2] : 358623431991485


Backup critical data [18] to backup\MT6580__3C26D1A636A6963F7A9A9A83FCF4B1A1\
[3] Read : NVRAM
[14] Read : NVDATA
[2] Read : PROINFO
[7] Read : LK
[4] Read : PROTECT1
[0] Read : PRELOADER
Backup done

Scan preloader...

PRELOADER: MT6752 preloader_aeon6580_weg_l_l100.bin with 17 memory type(s) supported
EMI : [00] : eMMC : DDR2 : ID : 700100533130303034 : VEN : KINGSTON | DEV : S10004 : RAM : [ 512.00 MB ]
EMI : [01] : eMMC : DDR2 : ID : 110100303034474530 : VEN : TOSHIBA | DEV : 004GE0 : RAM : [ 512.00 MB ]
EMI : [02] : eMMC : DDR2 : ID : 1501004E35585A4D42 : VEN : SAMSUNG | DEV : N5XZMB : RAM : [ 512.00 MB ]
EMI : [03] : eMMC : DDR2 : ID : 90014A483447316404 : VEN : HYNIX | DEV : H4G1d : RAM : [ 512.00 MB ]
EMI : [04] : eMMC : DDR2 : ID : 110100303034473930 : VEN : TOSHIBA | DEV : 004G90 : RAM : [ 512.00 MB ]
EMI : [05] : eMMC : DDR3 : ID : 8801034E4361726420 : VEN : FORESEE | DEV : NCard : RAM : [ 1.00 GB ]
EMI : [06] : eMMC : DDR3 : ID : 700100543232373038 : VEN : KINGSTON | DEV : T22708 : RAM : [ 1.00 GB ]
EMI : [07] : eMMC : DDR3 : ID : 15010038574D423352 : VEN : SAMSUNG | DEV : 8WMB3R : RAM : [ 1.00 GB ]
EMI : [08] : eMMC : DDR3 : ID : 8801034D3842313647 : VEN : FORESEE | DEV : M8B16G : RAM : [ 1.00 GB ]
EMI : [09] : eMMC : DDR2 : ID : 1501004E4A325A4D42 : VEN : SAMSUNG | DEV : NJ2ZMB : RAM : [ 512.00 MB ]
EMI : [0A] : eMMC : DDR3 : ID : 90014A483847316505 : VEN : HYNIX | DEV : H8G1e : RAM : [ 1.00 GB ]
EMI : [0B] : eMMC : DDR3 : ID : 150100385750443352 : VEN : SAMSUNG | DEV : 8WPD3R : RAM : [ 1.00 GB ]
EMI : [0C] : eMMC : DDR3 : ID : 15010038474E443352 : VEN : SAMSUNG | DEV : 8GND3R : RAM : [ 1.00 GB ]
EMI : [0D] : eMMC : DDR3 : ID : 90014A483847346192 : VEN : HYNIX | DEV : H8G4a? : RAM : [ 1.00 GB ]
EMI : [0E] : eMMC : DDR3 : ID : 90014A483847326404 : VEN : HYNIX | DEV : H8G2d : RAM : [ 1.00 GB ]
EMI : [0F] : eMMC : DDR3 : ID : 110100303038474530 : VEN : TOSHIBA | DEV : 008GE0 : RAM : [ 1.00 GB ]
EMI : [10] : eMMC : DDR3 : ID : 110100303038473330 : VEN : TOSHIBA | DEV : 008G30 : RAM : [ 1.00 GB ]
Store preloader:
PRELOADER saved to: backup\PRELOADER\preloader_aeon6580_weg_l_l100.bin

Verify backup\PRELOADER\preloader_aeon6580_weg_l_l100.bin with hash 26421776
Socket Error # 11001
Host not found.
Finished

Done
Elapsed: 00:00:29

Operation : Read Firmware [ v2.35 ]

ExtSparse : Enabled
ForceRead : Disabled

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM5)
MODE : PRELOADER PORT
PORT : 5
Waiting BOOT ack...
PRELOADER : ACK confirmed
BROM : Init BROM
BROM init passed
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM : BROM|BL : 0xFF|0x01
BROM : PRELOADER PORT
Mode: 0 State: 6 Core: 0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA...
BROM : DA sent
BROM : Transfer control to DA...
DA : AGENT started
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 3000011145473430E28E0130BF92E6C7
DAInf: 4 : 2 : 156
DA : DRAM ready
DA : BOOT to 2nd DA...
DA : Receiving HW info

EMMC: CID : 110100303034474530018EE2C7E692BF
EMMC: VEN : TOSHIBA : OEM : 0 : ID : 303034474530 : PRV : 0x01
EMMC: VEN : TOSHIBA : 004GE0
EMMC: SNN : 2397226982 ( 0x8EE2C7E6 ) , MF : 9/2015

EMMC:
BOOT1 : 0x00200000 [ 2.00 MB ]
BOOT2 : 0x00200000 [ 2.00 MB ]
RPMB : 0x00080000 [ 512.00 KB ]
USER : 0xEC000000 [ 3.69 GB ]

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x20000000 [ 512.00 MB ]

CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 3C26D1A636A6963F7A9A9A83FCF4B1A1

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done

Patch Level : LMY47I
Display ID : l100_lyx_h100_welcome_480x960_en_YL_v10
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2017-03-05
Build Time : 26.04.2019
Product Model : P20 Pro
Product Brand : Android
Product Name : P20 Pro
Product Device : P20 Pro
Product Manfct : Android
Board Platform : mt6580
Product Info : aeon6580_weg_l_l100

MT6580__Android__P20_Pro__6.0__l100_lyx_h100_welco me_480x960_en_YL_v10__LMY47I__aeon6580_weg_l_l100

Read : preloader.bin
Read : proinfo.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 13%
Read : cache.img
Read : userdata.img

FW Size : 1.37 GB
Android Info saved : _Android_info.txt
Scatter : MT6580_Android_scatter.txt
Saved to : D:\FL TOOLS\Firmwares\huawei\MT6580__Android__P20_Pro__6 .0__l100_lyx_h100_welcome_480x960_en_YL_v10__LMY47 I__aeon6580_weg_l_l100\
Check firmware [MT6580__Android__P20_Pro__6.0__l100_lyx_h100_welco me_480x960_en_YL_v10__LMY47I__aeon6580_weg_l_l100]...
Can not check

Done
Elapsed: 00:06:56
  Reply With Quote
The Following User Says Thank You to Jacobkamudyariw For This Useful Post:
Old 09-30-2022, 11:35   #72216 (permalink)
No Life Poster
 
Join Date: Sep 2021
Location: Germany
Posts: 627
Member: 2996196
Status: Offline
Thanks Meter: 632
Thumbs up HUAWEI G628-TL00 UI SYSTEM UNFORTUNATELY STOPPED FIXED By CM2
Chinese Miracle II : MediaTek Service Module
Created by Infinity-Box (c) 2022
Creation time : 2022/08/02
Module version : 2.34
Device Info file : _Android_info.txt

Patch Level : HUAWEIG628-TL00
Display ID : G628-TL00V100R001CHNC01B202
Ver. CodeName : REL
Ver. Release : 4.4.4
Build Time : 18.11.2015
Product Model : HUAWEI G628-TL00
Product Brand : HUAWEI
Product Name : G628-TL00
Product Device : HWG628-TL
Product Board : G628-TL00
Product Manfct : HUAWEI
Product Info : HWG628-TL

Preloader [HW DEV] Info :
EMI : DEV : MT6752
EMI : SRC : preloader_wt96629.bin
EMI : CNT : 0004
EMI : [00] : eMMC : DDR3 : ID : 150100513758534142 : VEN : SAMSUNG | DEV : Q7XSAB : RAM : [ 1.00 GB ]
EMI : [01] : eMMC : DDR3 : ID : 90014A483847326404 : VEN : HYNIX | DEV : H8G2d : RAM : [ 1.00 GB ]
EMI : [02] : eMMC : DDR3 : ID : 110100303038474530 : VEN : TOSHIBA | DEV : 008GE0 : RAM : [ 1.00 GB ]
EMI : [03] : eMMC : DDR3 : ID : 150100514E31534D42 : VEN : SAMSUNG | DEV : QN1SMB : RAM : [ 1.00 GB ]

Operation : Write Flash [ v2.35 ]

Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Enabled
Safe UserData : Disabled
Flash Format : Disabled

Files :10
[FL] : Set : lk.bin
[FL] : Set : boot.img
[FL] : Set : recovery.img
[FL] : Set : secro.img
[FL] : Set : logo.bin
[FL] : Set : tz.img
[FL] : Set : tz.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0x44CE3798 [ 1.08 GB ]

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MediaTek USB Port (COM8)
MODE : BOOTROM
PORT : 8
Waiting BOOT ack...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed
CHIP : MT6752 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : LEGACY [MTK]
BROM : MEID : 6789DA79606F86A6948D635914014D7C
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
Mode: 0 State: 6 Core: 0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA...
AGENT : MTK_AllInOne_DA.bin
AGENT : CHANGE : v1844
AGENT : Found MT6752
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA...
BROM : DA sent
BROM : Transfer control to DA...
DA : AGENT started
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 484A019064324738A20305047D525EBA
DAInf: 4 : 2 : 143
DA : EXT_RAM NOT initialized
eMMC : OK
eMMC : 90014A4838473264040503A2BA5E527D
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
DRAM : 0x0160
EMI : DEV : FireFly
EMI : SRC : preloader_wt96629.bin
EMI : CNT : 0003
EMI : [00] : ID : 150100513758534142 : VEN : SAMSUNG | DEV : Q7XSAB : RAM : [ 1.00 GB ]
EMI : [01] : ID : 90014A483847326404 : VEN : HYNIX | DEV : H8G2d : RAM : [ 1.00 GB ]
EMI : [02] : ID : 110100303038474530 : VEN : TOSHIBA | DEV : 008GE0 : RAM : [ 1.00 GB ]
EMI : Init EMI from PRELOADER
INIT : 0xB0 : DRAM [ 0x00000000 : [ 0 B ] ]
DRAM : DRAM: 0x40000000 [ 1.00 GB ]
DA : DRAM ready
DA : BOOT to 2nd DA...
DA : Receiving HW info

EMMC: CID : 90014A4838473264040503A2BA5E527D
EMMC: VEN : HYNIX : OEM : 74 : ID : 483847326404 : PRV : 0x05
EMMC: VEN : HYNIX : H8G2d
EMMC: SNN : 60996190 ( 0x03A2BA5E ) , MF : 5/2015

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x1D2000000 [ 7.28 GB ]

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]

CHIP : MT6752 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001 , EVOL : 0x0000

RNID : 45694A98B37468ED74D578468E3747FD

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM17)
MODE : PRELOADER PORT
PORT : 17

Boot done

[FL] : HW verification passed

[FL] : Pre-Flash backup

Backup critical data [18] to backup\MT6752__6789DA79606F86A6948D635914014D7C\
Backup done

[FL] : Pre-Flash backup passed

SEC_DL : False (CUST)
SEC_DL : SECURE USB DL DISABLED
SEC_ID : 0x35464646304237304435444533464335

[FL] : Pre-Erase
Erase : 0x0000000000000000 : 0x0000000000080000
Erase : 0x0000000001C80000 : 0x0000000003920000
Erase : 0x00000000059A0000 : 0x00000000DBE60000

[FL] : RePartition
[FL] : RePartition Ok


[FL] : Flashing now...

Write : LK
Write : BOOT
Write : RECOVERY
Write : SECRO
Write : LOGO
Write : TEE1
Write : TEE2
Write : SYSTEM
Write : CACHE
Write : USERDATA

[FL] : RePartition
[FL] : RePartition Ok

[FL] : Flashing finished

Done
Elapsed: 00:02:18

Reconnect Power/Cable now
  Reply With Quote
The Following User Says Thank You to Jacobkamudyariw For This Useful Post:
Old 09-30-2022, 14:26   #72217 (permalink)
No Life Poster
 
profkefah's Avatar
 
Join Date: Mar 2015
Location: Islam
Age: 35
Posts: 7,399
Member: 2371500
Status: Offline
Thanks Meter: 5,801
C2 CONDOR IMEI REPAIR done
ORIGINAL POSTER

BelkacemGhezzaz DZGSM


Last edited by profkefah; 09-30-2022 at 14:34. Reason: C2 CONDOR IMEI REPAIR done
  Reply With Quote
The Following User Says Thank You to profkefah For This Useful Post:
Old 09-30-2022, 14:28   #72218 (permalink)
No Life Poster
 
profkefah's Avatar
 
Join Date: Mar 2015
Location: Islam
Age: 35
Posts: 7,399
Member: 2371500
Status: Offline
Thanks Meter: 5,801
w375 motorola UNLOCK done
ORIGINAL POSTER
halfa40gsm DZGSM



Action: unlock
Device: W375
Checking data, wait...
Connect...
Press and HOLD Power button...
rom version: 0411
Connecting...
rom code version: 0411
initial boot phase complete
Release Power button !
Connect Done
Boot...
Boot Done
Set Baud...
115200
Set Baud Done
Check Flash-1...
SW version: 0.0.73
HW version: MOTOROLA_H80S
LP ver: 0073_001
Flex ver: FLEX_D4_009
cpu id: 08B6
imei eeprom: 3530030152977710
required SW version: 0.0.73
sp-locked: 20801.
Check Flash-1 Done
Check Flash-2...
reading ...
file saved: C:\InfinityBox\Moto01\backup_eeprom_calibration_35 300301529777_20131026-104446.34E.bin
unlock step-1 Ok
unlock step-2 Ok
unlock step-3 Ok
unlock step-4 Ok
unlock step-5 Ok
finished Ok
Finished, time used: 42 sec
Remove/Install battery now !
  Reply With Quote
The Following User Says Thank You to profkefah For This Useful Post:
Old 09-30-2022, 20:06   #72219 (permalink)
No Life Poster
 
tayobjoy1's Avatar
 
Join Date: Aug 2020
Location: Mozambique
Age: 20
Posts: 967
Member: 2965136
Status: Offline
Sonork: 58846
Thanks Meter: 1,202
Nokia TA-1352 SP Unlock Done
Code:
Card found : 46828B86 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.12

Load IDBase v8331 Ok!


Operation : Identify [ v2.12 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Cosmo_00WW-user 11 RP1A.201005.001 V1.270_B01 release-keys
MemoryInfo : EMMC :  16 GB  ;  DRAM : 1 GB

Platform Version: MOCORTM_20A_W21.15.3_P7_Debug
Project Version:   sharkl3_pub
BASE  Version:    4G_MODEM_20A_W21.15.3_P7
HW Version:        sc9863A_modem
CMP_Time : 06-08-2021 11:05:19

MODEM TAG : MOCORTM_20A_W21.15.3_P7_Debug_4G_MODEM_20A_W21.15.3_P7_sc9863A_modem_sharkl3_pub


PSN1 : E645400190708566
PSN1 : E286655849B91300336

NVMng  : SecurityInfo 
IMEI[1] : 356748979757220
IMEI[2] : 356748979757238
WIFIMAC : 44917C2395F5
BT_MAC  : 44917C2395F4
SEC : SLS:2, SKS:0, SKV:4


Done!
Elapsed: 00:00:23

Code:
Operation : SP Unlock [ v2.12 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Cosmo_00WW-user 11 RP1A.201005.001 V1.270_B01 release-keys
Platform Version: MOCORTM_20A_W21.15.3_P7_Debug
Project Version:   sharkl3_pub
BASE  Version:    4G_MODEM_20A_W21.15.3_P7
HW Version:        sc9863A_modem
CMP_Time : 06-08-2021 11:05:19

MODEM TAG : MOCORTM_20A_W21.15.3_P7_Debug_4G_MODEM_20A_W21.15.3_P7_sc9863A_modem_sharkl3_pub

NVMng  : SecurityInfo 
IMEI[1] : 356748979757220
IMEI[2] : 356748979757238
WIFIMAC : 44917C2395F5
BT_MAC  : 44917C2395F4
SEC : SLS:2, SKS:0, SKV:4


SLStatus : 2C
Status : Locked! Server unlock required!

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 70,  price:5
Process...
Finished

Unlocking device ... 
Sync data ... 
Device unlocked!

Done!
Elapsed: 00:00:38
  Reply With Quote
The Following User Says Thank You to tayobjoy1 For This Useful Post:
Old 10-01-2022, 07:07   #72220 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Sindh Pakistan
Posts: 8,871
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 15,420
Smile Oppo A5s (AX5s) Smart Reset Done
Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : F71E295824504A4A7A617992F5679AC9
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 83C9151E1EFCFA3D5650EE42956EEA5712EF70DBC908A26406 EAFE14AB7B75ED
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!

EMMC: CID : 90014A68423861503E032AA2753227C5
EMMC: VEN : HYNIX : OEM : 74 : ID : 68423861503E : PRV : 0x03
EMMC: VEN : HYNIX : hB8aP>
EMMC: SNN : 715289906 ( 0x2AA27532 ) , MF : 2/2020

EMI : DEV : FireFly
EMI : SRC : preloader_oppo6765_18511.bin
EMI : CNT : 0009
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: CID : 90014A68423861503E032AA2753227C5
EMMC: VEN : HYNIX : OEM : 74 : ID : 68423861503E : PRV : 0x03
EMMC: VEN : HYNIX : hB8aP>
EMMC: SNN : 715289906 ( 0x2AA27532 ) , MF : 2/2020

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : E7749EC21E2134FCB6A8CF9624108FD

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x805757

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!
Elapsed: 00:00:30

Reconnect Power/Cable!
  Reply With Quote
Old 10-01-2022, 07:44   #72221 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Sindh Pakistan
Posts: 8,871
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 15,420
Smile Digit4G Shine
Chinese Miracle II : MediaTek Service Module
Created by Infinity-Box (c) 2022
Creation time : 2022/06/07
Module version : 2.34
Device Info file : _Android_info.txt

Patch Level : MRA58K
Display ID : Digit_M42433DG_SW02_20211220_2017
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2015-10-01
Build Time : 20.12.2021
Product Model : Digit4G Shine
Product Brand : Digit
Product Name : Digit4G_Shine
Product Device : Digit4G_Shine
Product Manfct : alps
Board Platform : mt6739
Product Info : Digit4G_Shine
Product Model : V1.0

Preloader [HW DEV] Info :
EMI : DEV : MT6739
EMI : SRC : preloader_fise6731_kaio_m.bin
EMI : CNT : 0006
EMI : [00] : eMMC : DDR3 : ID : 700100454534454434 : VEN : KINGSTON | DEV : EE4ED4 : RAM : [ 512.00 MB ]
EMI : [01] : eMMC : DDR3 : ID : F40122426977696E20 : VEN : BIWIN | DEV : Biwin : RAM : [ 512.00 MB ]
EMI : [02] : eMMC : DDR3 : ID : 150100463558354342 : VEN : SAMSUNG | DEV : F5X5CB : RAM : [ 512.00 MB ]
EMI : [03] : eMMC : DDR3 : ID : 150100464A32354142 : VEN : SAMSUNG | DEV : FJ25AB : RAM : [ 512.00 MB ]
EMI : [04] : eMMC : DDR3 : ID : FE014E50314A39344D : VEN : MICRON | DEV : P1J94M : RAM : [ 512.00 MB ]
EMI : [05] : eMMC : DDR3 : ID : 90014A483447326111 : VEN : HYNIX | DEV : H4G2a : RAM : [ 512.00 MB ]

Operation : Write Flash [ v2.34 ]

Repartition : Disabled
Flash Verify : Disabled
Reg.Pre-Erase : Disabled
Verify HW/SW : Disabled
SData Backup : Disabled
Safe UserData : Disabled
Flash Format : Disabled

Files :3
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0x1C05C39C [ 448.36 MB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : 16F73D69C86D5C0639336A47ACD7A403
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 2F4A7E113CA8C2584E7A5282B486BEA1C5E2FC0B0EA6042903 035778310249FD
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!

EMI : DEV : FireFly
EMI : SRC : preloader_fise6731_kaio_m.bin
EMI : CNT : 0006
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x20000000 [ 512.00 MB ]

EMMC: CID : 90014A4834473261110211001014B4E1
EMMC: VEN : HYNIX : OEM : 74 : ID : 483447326111 : PRV : 0x02
EMMC: VEN : HYNIX : H4G2a
EMMC: SNN : 285216788 ( 0x11001014 ) , MF : 11/2017

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE9000000 [ 3.64 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : B627E2428C3D96DEA32B38DBB7BD6EE5

DA : USB : HIGH-SPEED

Boot done!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432


[FL] : Flashing now ...

Write : SYSTEM
Write : CACHE
Write : USERDATA

[FL] : Flashing finished!

Done!
Elapsed: 00:01:05

Reconnect Power/Cable!
  Reply With Quote
Old 10-01-2022, 07:54   #72222 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 8,670
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,368
Oppo F1s MT6750 FRP/Pattren Reset Done With King Infinity CM2


Code:
S/N: A19EC787 v0153
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.35

Load IDBase v312457 Ok!

Can not get data from server
Username or Password is wrong, set it at Settings tab
How to configure server access https://infinity-box.com/?r=100166

Load IDBase v312457 Ok!
Operation : Reset Settings/Format FS [ v2.35 ]

Mode : SMART RESET

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MediaTek USB Port_V1632 (COM161)
MODE : BOOTROM
PORT : 161
Waiting BOOT ack...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 5A77F1B94CCD681F76629993B1AA4432
BROM : SecLevel : 0x00000001
BROM : SecMode  : SBC
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : EMI : Search
BROM : EMI : Found
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA...
BROM : DA sent
BROM : Transfer control to DA... 
     DA : AGENT started
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized

     EMI : DEV : FireFly
     EMI : SRC : preloader_oppo6750_15131.bin
     EMI : CNT : 0006
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed

DA : BOOT to 2nd DA...
DA : 2ND stage confirmed
DA : SYNC with DA passed
DA : Receiving HW info

        SRAM: 0x00038000 [ 224.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : 150100525831344D4207AECECE211483
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 525831344D42 : PRV : 0x07
        EMMC: VEN : SAMSUNG : RX14MB
        EMMC: SNN : 2932788769 ( 0xAECECE21 ) , MF : 1/2017

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 9057FEB290A935E381C1BEEFF251F5EF

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM183)
MODE : PRELOADER PORT
PORT : 183

Boot done

SmartInfo : 0x8D5454

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done
Elapsed: 00:01:24

Reconnect Power/Cable now
  Reply With Quote
Old 10-01-2022, 12:45   #72223 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Sindh Pakistan
Posts: 8,871
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 15,420
Smile Jazz Digit 4G Smart Reset Done
Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : F8154F958CBAAA5222ECDC03E83A304B
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 868330DD1221FD9B7A9B8F8DE8135FC7588F94AC108F197949 0B2B698D3BC3FE
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!

EMI : DEV : FireFly
EMI : SRC : preloader_fise6731_kaio_m.bin
EMI : CNT : 0006
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x20000000 [ 512.00 MB ]

EMMC: CID : 90014A483447326111024232A8511523
EMMC: VEN : HYNIX : OEM : 74 : ID : 483447326111 : PRV : 0x02
EMMC: VEN : HYNIX : H4G2a
EMMC: SNN : 1110616145 ( 0x4232A851 ) , MF : 1/2018

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE9000000 [ 3.64 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 , EVOL : 0x0000

RNID : 320371EDB1EAEE975CDFDC1E540307B

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x8E5454

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!
Elapsed: 00:01:05

Reconnect Power/Cable!
  Reply With Quote
Old 10-01-2022, 13:32   #72224 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 8,670
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,368
Itel A571L SPD77xx FRP/Pattren Reset Done With King Infinity CM2


Code:
Card found : A19EC787 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : A571L
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0008
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ... 
FDL : SEC : RSA auth passed!
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP

Reconnect Power/Cable!

Done!
Elapsed: 00:00:23
  Reply With Quote
Old 10-01-2022, 14:15   #72225 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,788
Member: 2644066
Status: Offline
Thanks Meter: 1,773
Infinix smart hd reset frp done by cm2
Card found : 73CA70CC , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34

Load IDBase v723487 Ok!

Update configuration ...
Load IDBase v723487 Ok!

Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM15)
MODE : PRELOADER PORT
PORT : 15
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : Reset Interface!
PTFN : MediaTek USB Port (COM16)
MODE : BOOTROM
PORT : 16
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : MEID : A7579E30CF29FAA18C08689D824E56CC
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 9B9EED0A30B427D45E4B9E674E12E05625563845592662C987 BABAAF5D050B70
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_infinix_x612b.bin
EMI : CNT : 0009
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A400 [ 233.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: CID : 150100515836334142033F39BA1AC75F
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 515836334142
EMMC: VEN : SAMSUNG : QX63AB
EMMC: SNN : 1060747802 ( 0x3F39BA1A) , MF : 12/2020

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 3CB7F27098107097DDAFB6BB9CDA376B

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x825657

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA
Format Ok : USERDATA

Done!
Elapsed: 00:00:43

Reconnect Power/Cable!
  Reply With Quote
Reply
Page 4815 of 5072 « First 38154315471547654805481248134814 4815 481648174818482548654915 Last »

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 17:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 11:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 09:03
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 20:17

 



All times are GMT +1. The time now is 06:59.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.78788 seconds with 10 queries

SEO by vBSEO