Successfully unlocked/repaired phones by Infinity-Box

[saeedullah_khan]

registered to: saeedullah_khan

Connect phone on selected interface...

UFS S/N 113742 boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected! [DCT4+]
read info... - Ok

Operating mode is OK, no need change...

Field 1
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 6 write - Ok
Record 12 write - Ok
Record 16 write - Ok
Field 2
Record 0 write - Ok
Field 3
Record 0 write - Ok
Field 4
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 9 write - Ok
Field 5
Record 0 write - Ok
Field 7
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Field 8
Record 0 write - Ok
Field 11
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 9 write - Ok
Record 10 write - Ok
Record 11 write - Ok
Record 12 write - Ok
Record 13 write - Ok
Record 14 write - Ok
Record 15 write - Ok
Record 16 write - Ok
Record 17 write - Ok
Record 18 write - Ok
Record 19 write - Ok
Record 20 write - Ok
Record 21 write - Ok
Record 22 write - Ok
Record 23 write - Ok
Record 24 write - Ok
Record 25 write - Ok
Record 26 write - Ok
Record 27 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Record 30 write - Ok
Record 31 write - Ok
Record 32 write - Ok
Record 33 write - Ok
Record 34 write - Ok
Record 35 write - Ok
Record 36 write - Ok
Record 37 write - Ok
Record 38 write - Ok
Record 39 write - Ok
Record 40 write - Ok
Record 41 write - Ok
Record 42 write - Ok
Record 43 write - Ok
Record 44 write - Ok
Record 45 write - Ok
Record 46 write - Ok
Record 47 write - Ok
Record 48 write - Ok
Record 49 write - Ok
Record 50 write - Ok
Record 51 write - Ok
Record 52 write - Ok
Record 53 write - Ok
Record 54 write - Ok
Record 55 write - Ok
Record 56 write - Ok
Record 57 write - Ok
Record 58 write - Ok
Record 59 write - Ok
Record 60 write - Ok
Record 61 write - Ok
Record 62 write - Ok
Record 63 write - Ok
Record 64 write - Ok
Record 65 write - Ok
Record 66 write - Ok
Record 67 write - Ok
Record 68 write - Ok
Record 69 write - Ok
Record 70 write - Ok
Record 71 write - Ok
Record 72 write - Ok
Record 73 write - Ok
Record 74 write - Ok
Record 75 write - Ok
Record 76 write - Ok
Record 77 write - Ok
Record 78 write - Ok
Record 79 write - Ok
Record 80 write - Ok
Record 81 write - Ok
Record 82 write - Ok
Record 83 write - Ok
Record 84 write - Ok
Record 85 write - Ok
Record 86 write - Ok
Record 87 write - Ok
Record 88 write - Ok
Record 89 write - Ok
Record 90 write - Ok
Record 91 write - Ok
Record 92 write - Ok
Record 93 write - Ok
Record 94 write - Ok
Record 95 write - Ok
Record 96 write - Ok
Record 97 write - Ok
Record 98 write - Ok
Record 99 write - Ok
Record 100 write - Ok
Record 101 write - Ok
Record 102 write - Ok
Record 103 write - Ok
Record 104 write - Ok
Record 105 write - Ok
Record 106 write - Ok
Record 107 write - Ok
Record 108 write - Ok
Record 109 write - Ok
Record 110 write - Ok
Record 111 write - Ok
Record 112 write - Ok
Record 113 write - Ok
Record 114 write - Ok
Field 12
Record 0 write - Ok
Field 13
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 9 write - Ok
Record 10 write - Ok
Record 11 write - Ok
Record 12 write - Ok
Record 13 write - Ok
Record 14 write - Ok
Record 15 write - Ok
Record 16 write - Ok
Record 17 write - Ok
Record 18 write - Ok
Record 19 write - Ok
Record 20 write - Ok
Record 21 write - Ok
Record 22 write - Ok
Record 23 write - Ok
Record 24 write - Ok
Record 25 write - Ok
Record 26 write - Ok
Record 27 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Record 30 write - Ok
Record 31 write - Ok
Record 32 write - Ok
Record 33 write - Ok
Record 34 write - Ok
Record 35 write - Ok
Record 36 write - Ok
Record 37 write - Ok
Record 38 write - Ok
Record 39 write - Ok
Record 40 write - Ok
Record 41 write - Ok
Record 42 write - Ok
Record 43 write - Ok
Record 44 write - Ok
Record 45 write - Ok
Record 46 write - Ok
Record 47 write - Ok
Record 48 write - Ok
Record 49 write - Ok
Record 50 write - Ok
Record 51 write - Ok
Record 52 write - Ok
Record 53 write - Ok
Record 54 write - Ok
Record 55 write - Ok
Record 56 write - Ok
Record 57 write - Ok
Record 58 write - Ok
Record 59 write - Ok
Record 60 write - Ok
Record 61 write - Ok
Record 62 write - Ok
Record 63 write - Ok
Record 64 write - Ok
Record 65 write - Ok
Record 66 write - Ok
Record 67 write - Ok
Record 68 write - Ok
Record 69 write - Ok
Record 70 write - Ok
Record 71 write - Ok
Record 72 write - Ok
Record 73 write - Ok
Record 74 write - Ok
Record 75 write - Ok
Record 76 write - Ok
Record 77 write - Ok
Record 78 write - Ok
Record 79 write - Ok
Record 80 write - Ok
Record 81 write - Ok
Record 82 write - Ok
Record 83 write - Ok
Record 84 write - Ok
Record 85 write - Ok
Record 86 write - Ok
Record 87 write - Ok
Record 88 write - Ok
Record 89 write - Ok
Record 90 write - Ok
Record 91 write - Ok
Record 92 write - Ok
Record 93 write - Ok
Record 94 write - Ok
Record 95 write - Ok
Record 96 write - Ok
Record 97 write - Ok
Record 98 write - Ok
Record 99 write - Ok
Record 100 write - Ok
Record 101 write - Ok
Record 102 write - Ok
Record 103 write - Ok
Record 104 write - Ok
Record 105 write - Ok
Record 106 write - Ok
Record 107 write - Ok
Record 108 write - Ok
Record 109 write - Ok
Record 110 write - Ok
Record 111 write - Ok
Record 112 write - Ok
Record 113 write - Ok
Record 114 write - Ok
Record 115 write - Ok
Record 116 write - Ok
Record 117 write - Ok
Record 118 write - Ok
Record 119 write - Ok
Record 120 write - Ok
Record 121 write - Ok
Record 122 write - Ok
Record 123 write - Ok
Record 124 write - Ok
Record 125 write - Ok
Record 126 write - Ok
Record 127 write - Ok
Record 128 write - Ok
Record 129 write - Ok
Record 130 write - Ok
Record 131 write - Ok
Record 132 write - Ok
Record 133 write - Ok
Record 134 write - Ok
Record 135 write - Ok
Record 136 write - Ok
Record 137 write - Ok
Record 138 write - Ok
Record 139 write - Ok
Record 140 write - Ok
Record 141 write - Ok
Record 142 write - Ok
Record 143 write - Ok
Record 144 write - Ok
Record 145 write - Ok
Record 146 write - Ok
Record 147 write - Ok
Record 148 write - Ok
Record 149 write - Ok
Record 150 write - Ok
Record 151 write - Ok
Record 152 write - Ok
Record 153 write - Ok
Record 154 write - Ok
Record 155 write - Ok
Record 156 write - Ok
Record 157 write - Ok
Record 158 write - Ok
Record 159 write - Ok
Record 160 write - Ok
Record 161 write - Ok
Record 162 write - Ok
Record 163 write - Ok
Record 164 write - Ok
Record 165 write - Ok
Record 166 write - Ok
Record 167 write - Ok
Record 168 write - Ok
Record 169 write - Ok
Record 170 write - Ok
Record 171 write - Ok
Record 172 write - Ok
Record 173 write - Ok
Record 174 write - Ok
Record 175 write - Ok
Record 176 write - Ok
Record 177 write - Ok
Record 178 write - Ok
Record 179 write - Ok
Record 180 write - Ok
Record 181 write - Ok
Record 182 write - Ok
Record 183 write - Ok
Record 184 write - Ok
Record 185 write - Ok
Record 186 write - Ok
Record 187 write - Ok
Record 188 write - Ok
Record 189 write - Ok
Record 190 write - Ok
Record 191 write - Ok
Record 192 write - Ok
Record 193 write - Ok
Record 194 write - Ok
Record 195 write - Ok
Record 196 write - Ok
Record 197 write - Ok
Record 198 write - Ok
Record 199 write - Ok
Field 14
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 9 write - Ok
Record 10 write - Ok
Record 11 write - Ok
Record 12 write - Ok
Record 13 write - Ok
Record 14 write - Ok
Record 15 write - Ok
Record 16 write - Ok
Record 17 write - Ok
Record 18 write - Ok
Record 19 write - Ok
Field 15
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 9 write - Ok
Field 16
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 9 write - Ok
Field 17
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Field 18
Record 0 write - Ok
Field 19
Record 0 write - Ok
Field 22
Record 0 write - Ok
Field 26
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 9 write - Ok
Record 10 write - Ok
Record 11 write - Ok
Record 12 write - Ok
Record 13 write - Ok
Record 14 write - Ok
Record 15 write - Ok
Record 16 write - Ok
Record 17 write - Ok
Record 18 write - Ok
Record 19 write - Ok
Record 20 write - Ok
Record 21 write - Ok
Record 22 write - Ok
Record 23 write - Ok
Record 24 write - Ok
Record 25 write - Ok
Record 26 write - Ok
Record 27 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Field 27
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Field 28
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Field 29
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Field 30
Record 0 write - Ok
Field 32
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Field 33
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 9 write - Ok
Record 10 write - Ok
Record 11 write - Ok
Record 12 write - Ok
Record 13 write - Ok
Field 34
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Field 35
Record 0 write - Ok
Field 36
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 8 write - Ok
Record 9 write - Ok
Record 10 write - Ok
Record 11 write - Ok
Record 12 write - Ok
Record 13 write - Ok
Record 14 write - Ok
Record 15 write - Ok
Record 17 write - Ok
Record 18 write - Ok
Record 20 write - Ok
Field 37
Record 0 write - Ok
Field 38
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 9 write - Ok
Record 10 write - Ok
Field 40
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Field 41
Record 0 write - Ok
Field 46
Record 0 write - Ok
Record 1 write - Ok
Field 54
Record 0 write - Ok
Field 57
Record 0 write - Ok
Field 60
Record 0 write - Ok
Field 61
Record 0 write - Ok
Field 68
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 9 write - Ok
Record 10 write - Ok
Record 11 write - Ok
Record 12 write - Ok
Record 13 write - Ok
Record 14 write - Ok
Record 15 write - Ok
Record 16 write - Ok
Record 17 write - Ok
Record 18 write - Ok
Record 19 write - Ok
Field 73
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Field 74
Record 0 write - Ok
Field 91
Record 0 write - Ok
Field 93
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Field 100
Record 0 write - Ok
Field 101
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 13 write - Ok
Record 14 write - Ok
Record 16 write - Ok
Field 109
Record 0 write - Ok
Field 111
Record 0 write - Ok
Field 237
Record 0 write - Ok
Field 239
Record 15 write - Ok
Record 16 write - Ok
Record 17 write - Ok
Record 18 write - Ok
Record 19 write - Ok
Record 20 write - Ok
Record 21 write - Ok
Record 22 write - Ok
Record 23 write - Ok
Record 24 write - Ok
Record 25 write - Ok
Record 26 write - Ok
Record 27 write - Ok
Record 28 write - Ok
Field 242
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok

Done!

Elapsed: 00:00:19

Resetting selected items...
Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!
Settings Leave Factory defaults...
Set OK!

Elapsed: 00:00:12

Reading Phone Info....
SW ver : V 6.00 30-09-09 RH-105 (c) NMP
IMEI : 359335035269114
PPM : V 6.00
30-09-09
RH-105
(c) NMP
IA
DSP Ver : PR62_08w31_UPP
PCode : 0549920
BPCode : 0515534
HWID : 2601
LCDVer : SDI:NAXv88
LDS184
IMEI : 359335035269114
Sl Conf : 001-01-00000000000
Sl Prof : 800000000001000-B
Sl Aux : 000B0000
Hw Sig : 36151B8FCEDA488A
Provider : Default Test Operator

Lock info:
Block 1
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 2
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 3
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 4
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 5
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 6
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 7
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;

Done!

[saeedullah_khan]

registered to: saeedullah_khan

Connect phone on selected interface...

UFS S/N 113742 boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia 5130c-2
Software ver : V 07.91 29-10-09 RM-495 (c) Nokia
IMEI : 12345610654321?
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR72_09w33
APE Test:
PPM : V 07.91
29-10-09
RM-495
(c) Nokia
SSA
CNT :
Product SN : HEC345703
Product code : 0571584
Base Prd.code: 0567773
Module code : 0204024
Long Prod.SN : 0
Hardware info=======
HWID : 1000
Retu : 16
Tahvo : 22
Batery: 4411 mV
Camera:
CMT BT: 2222-302
APE BT:
APE HW:
LCDVer: SEIKO
RF ic : 06540601
Lock info ===========
IMEI : 12345610654321?
IMEI spNet :
IMEI svNet :

Unable to read Lock table...
User Code : 19555
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
WMDRM key found!
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006030C192101033000
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 1620020934704650F1C06E68F3A420F84A552979
CMT MODE ID : 00
CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 003F0001 , CMT , NOR
CMT Flash ID : 003F0001 < SPANSION => 72NS512P
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0
CMT Algo sent
CMT PAPUB : 0C917F11196FDB7378C18EF7260698CA4489DCA027
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Preparing for write certificates...

Switching to CMT...

CMT : NPC erase Ok
Writing NPC... Ok

CMT : CCC erase Ok
Writing CCC... Ok

CMT : HWC erase Ok
Writing HWC... Ok


Init Service mode... Wait...

Check phone mode...
Phone already in Test mode, skip change...

Writing SimLock Key... Ok!
Writing SimLock Data... Ok!

SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!!


Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Local SX4 procedure started...

Phone Imei: 359371033868003
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006030C192101033000
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 1620020934704650F1C06E68F3A420F84A552979
CMT MODE ID : 00
CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
CMT Loader sent, Boot Ok
rap= 1620020934704650F1C06E68F3A420F84A552979
hash= 9DDBFCFE6E73CED7D8C6268C8EB85723
key= 866E4995F4270C36D6AC30B85CB177C6ED643B9C

Init Service mode... Wait...

Key file updated...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Upload PM checked
Uploading RF/Battery tune to phone...
Using : RM-495.pm
Check phone mode...
Phone in Test mode
Seting Local mode... wait...
Local mode set

Field 1
Record 0 write - Error
Record 1 write - Error
Record 2 write - Error
Record 3 write - Error
Record 4 write - Error
Record 5 write - Error
Record 6 write - Error
Record 7 write - Error
Record 8 write - Error
Record 9 write - Error
Record 10 write - Error
Record 11 write - Error
Record 12 write - Error
Record 13 write - Error
Record 14 write - Error
Record 15 write - Error
Record 16 write - Error
Record 17 write - Error
Record 19 write - Error
Record 20 write - Error
Field 309
Record 0 write - Error
Record 1 write - Error
Record 2 write - Error
Record 4 write - Error
Record 5 write - Error
Record 7 write - Error
Record 8 write - Error
Record 17 write - Error
Record 22 write - Error

Check ST_SECURITY now...
Security status : ST_SECURITY => DAMAGED

Done!

Elapsed: 00:00:30

Upload done

Local SX4 procedure started...

Phone Imei: 359371033868003
Key file exists, no need to read...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Done!

Uploading RF/Battery tune to phone...
Using : RM-495.pm
Operating mode is OK, no need change...

Field 1
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 9 write - Ok
Record 10 write - Ok
Record 11 write - Ok
Record 12 write - Ok
Record 13 write - Ok
Record 14 write - Ok
Record 15 write - Ok
Record 16 write - Ok
Record 17 write - Ok
Record 19 write - Ok
Record 20 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 17 write - Ok
Record 22 write - Ok

Check ST_SECURITY now...
Security status : ST_SECURITY => OK

Done!

Elapsed: 00:00:02

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL3 phone detected

Done!

Resetting selected items...
Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!
Settings Leave Factory defaults...
Set OK!

Elapsed: 00:00:11

Checking Camera Configuration...
Operating mode is OK, no need change...

CAM1 HW : NIMMIIIIRRFF094B2F01
CAM1 SW ver : 002012
Updating Camera #1 Configuration...
CAM1 SW ver : 002012
Configuration Ok!

Secondary Camera #2 configuration info not exist

Done!

[saeedullah_khan]

registered to: saeedullah_khan

Connect phone on selected interface...

UFS S/N 113742 boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Unlock procedure started...

Phone Imei: 355536011916040
Checking locks...
Conf key : 0000000000000000
Provider key : 3102000000000000
Provider : T-Mobile;U.S.A.
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 36

LOCK STATUS :
=============================
BLK : 1
Lock1:Close
BLK : 2
Lock1:Close
BLK : 3
Lock1:Close
BLK : 4
Lock1:Close
BLK : 5
Lock1:Close
BLK : 6
Lock1:Close
BLK : 7
Lock1:Close
BLK : 8
Lock1:Close
BLK : 9
Lock1:Close
BLK : 10
Lock1:Close
BLK : 11
Lock1:Close
BLK : 12
Lock1:Close
BLK : 13
Lock1:Close
BLK : 14
Lock1:Close
BLK : 15
Lock1:Close
BLK : 16
Lock1:Close
BLK : 17
Lock1:Close
BLK : 18
Lock1:Close
BLK : 19
Lock1:Close
BLK : 20
Lock1:Close
BLK : 21
Lock1:Close
BLK : 22
Lock1:Close
BLK : 23
Lock1:Close
BLK : 24
Lock1:Close
BLK : 25
Lock1:Close
BLK : 26
Lock1:Close
BLK : 27
Lock1:Close
BLK : 28
Lock1:Close
BLK : 29
Lock1:Close
BLK : 30
Lock1:Close
BLK : 31
Lock1:Close
BLK : 32
Lock1:Close
BLK : 33

BLK : 34

BLK : 35

BLK : 36

=============================
LOCKS : Closed
=============================
PA_SL phone detected...
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006010C192101001101
CMT EM0 ID : 00000232
CMT EM1 ID : 00000353
CMT PUB ID : 03500112FE126B56351C854EDEF545E6C045F6B9
CMT MODE ID : 00
CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID : 191EC665DFAAF68F

CMT : Sending 2nd loader...
CMT Loader sent, Boot Ok
rap= 03500112FE126B56351C854EDEF545E6C045F6B9
hash= BAF3A9C3DBFA8454937DB77F2B8852B1
key= E73F0359BF7826D83E39F00786A20A88AA6CC910

Init Service mode... Wait...

Key file updated...
Using F-bus count...
Sending code 396243343835717 Level : 7 to SimLock Server...
Simlock Server Answer: Unlock code Accepted!
Unlock Done!

Reading Phone Info....
Connected phone - Nokia 6133
Software ver : V 05.60 17-11-06 RM-126 (c) Nokia.
IMEI : 355536011916040
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : dsp_mojito_05w46v31.1
APE Test:
PPM : V 05.60
17-11-06
RM-126
(c) Nokia.
NTM
CNT : ml5.14

Product SN : RJJ517594
Product code : 0537266
Base Prd.code: 0528663
Module code : 0203022
Long Prod.SN :
Hardware info=======
HWID : 8008
Retu : 32
Tahvo : 53
Batery: 4818 mV
Camera:
CMT BT:
APE BT:
APE HW:
LCDVer:
RF ic : 17211721
Lock info ===========
IMEI : 355536011916040
IMEI spNet :
IMEI svNet :

Conf key : 0000000000000000
Provider key : 3102000000000000
Provider : T-Mobile;U.S.A.
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 36

LOCK STATUS :
=============================
BLK : 1
Lock1:Open
BLK : 2
Lock1:Open
BLK : 3
Lock1:Open
BLK : 4
Lock1:Open
BLK : 5
Lock1:Open
BLK : 6
Lock1:Open
BLK : 7
Lock1:Open
BLK : 8
Lock1:Open
BLK : 9
Lock1:Open
BLK : 10
Lock1:Open
BLK : 11
Lock1:Open
BLK : 12
Lock1:Open
BLK : 13
Lock1:Open
BLK : 14
Lock1:Open
BLK : 15
Lock1:Open
BLK : 16
Lock1:Open
BLK : 17
Lock1:Open
BLK : 18
Lock1:Open
BLK : 19
Lock1:Open
BLK : 20
Lock1:Open
BLK : 21
Lock1:Open
BLK : 22
Lock1:Open
BLK : 23
Lock1:Open
BLK : 24
Lock1:Open
BLK : 25
Lock1:Open
BLK : 26
Lock1:Open
BLK : 27
Lock1:Open
BLK : 28
Lock1:Open
BLK : 29
Lock1:Open
BLK : 30
Lock1:Open
BLK : 31
Lock1:Open
BLK : 32
Lock1:Open
BLK : 33

BLK : 34

BLK : 35

BLK : 36

=============================
LOCKS : All Open
=============================
User Code : 12345
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

[***GSM007***]

5130C flashing Done

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm495__07.97.mcusw
PPM : rm495__07.97.ppm_mena_a1
CNT : rm495__07.97.image_u_red
Flashing phone now...
Check files done...
-> SWversion check skipped : Manual mode selected
Backup CRT308 data...
CRT308 Backup Created...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\354223037807724_SI M.rpl

Getting product info...
RAP_BOOT: 0803000302010000
RAP_PUBLIC: 1710010DF2A17D56C856C3B84463A54AF43F9A2A
CMT_ROOTKEY: 9DDBFCFE6E73CED7D8C6268C8EB85723
RAP_PAPUBKEY: 0C917F11196FDB7378C18EF7260698CA4489DCA0
Checking CNT sector PN<>FL
PN CNT sector : 128 kb
ConvertImage: Processing rm495__07.97.image_u_red
ConvertImage: Page Size is 128K, no need convert
Loader len: 308032, CHK: 048B
ADL -> Sending loader...
Update Server code succesfully sent to phone!
TIME : Boot time : 00:00:06
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
Waiting for response: 28
Waiting for response: 27
Waiting for response: 26
Waiting for response: 25
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Check data
ADL : Data accepted
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing rm495__07.97.mcusw
Found 6 areas to erase
Erasing area 0x00000000 - 0x000006BF, NOR, CMT
Result: 0000
Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT
Result: 0000
Erasing area 0x00040000 - 0x000BFFFF, NOR, CMT
Result: 0000
Erasing area 0x000C0000 - 0x0013FFFF, NOR, CMT
Result: 0000
Erasing area 0x00140000 - 0x0137FFFF, NOR, CMT
Result: 0000
Erasing area 0x01380000 - 0x0151FFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:02:31
Write : Processing rm495__07.97.mcusw
Total 1178 [1178/0/0] blocks to write, writing...
CMT : Writing Hash CERT [NOLO]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [UPDAPP]
CMT : Writing Hash CERT [DSP0]
CMT : Writing Hash CERT [MCUSW]
TIME : Write time : 00:01:05
MCU Write done
===Flashing [PPM]===
Erase : Processing rm495__07.97.ppm_mena_a1
Found 1 areas to erase
Erasing area 0x01520000 - 0x01DBFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:01:03
Write : Processing rm495__07.97.ppm_mena_a1
Total 388 [388/0/0] blocks to write, writing...
TIME : Write time : 00:00:20
PPM Write done
===Flashing [CNT]===
Erase : Processing rm495__07.97.image_u_red
Found 2 areas to erase
Erasing area 0x01DC0000 - 0x0215FFFF, NOR, CMT
Result: 0000
Erasing area 0x02160000 - 0x03FBFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:05:24
Write : Processing rm495__07.97.image_u_red
Total 656 [656/0/0] blocks to write, writing...
TIME : Write time : 00:00:38
CNT Write done
ADL : End flashing

Flashing done!
Total flash time : 00:11:03
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 5130c-2
Software Info: V 07.97 13-09-10 RM-495 (c) Nokia
IMEI: 354223037807724
PPM version : V 07.97 13-09-10 RM-495 (c) Nokia MEN
Product code: 0571952
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Checking User Certificates...
Total - 0 certs
Uploading certificates...
Writen 21 certs!
Set phone to Normal mode...
AfterFlash operations done...
Done!

Elapsed: 00:12:05

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok






GSM007

[md_amin]

Vodafone-340 unlock done


COM6 [VCP0] selected
module v3.91
Action: "sp-unlock"
unlock method: smart fast
Model: Vodafone-340
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A05:8A00]...
CPU: MT6225
chip: 0001:A303:A00F
status: 01
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E05
Date: 2006.06.14
Version: 1.0
Version: BM35A1.V2.22.M00.02.44
Version: FOXLINK25_08B_HW
81 byte(s) read
imei: 35592203512199
connection Ok
186 byte(s) read
reading data...
building new data...
writing data...
174 byte(s) read
reading data...
972 byte(s) read
building new data...
writing data...
verifying...
verification Ok
done
Finished, time used: 14 sec
Remove/Install battery now !

[md_amin]

AT&T ZTE-R225 UNLOCK DONE..

COM6 [VCP2] selected
module v3.91
Action: "sp-unlock"
unlock method: smart fast
Model: ZTE-R225
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A05:8A00]...
CPU: MT6225
chip: 0001:2C03:0007
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E05
Date: 2006.06.14
Version: 1.0
Version: ES-ATT-USA8-P103D13V1.1.5B01
Version: 09AZTENJ25_09A
86 byte(s) read
imei: 01229500366015
connection Ok
193 byte(s) read
reading data...
reading data #2...
building new data...
writing data...
181 byte(s) read
reading data...
264 byte(s) read
building new data...
writing data...
verifying...
verification Ok
done
Finished, time used: 13 sec
Remove/Install battery now !

[saeedullah_khan]

registered to: saeedullah_khan

Connect phone on selected interface...

UFS S/N 113742 boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected! [DCT4+]
read info... - Ok

Resetting User Code to default (12345)...
Clear data : Ok
Result: not set
Done!

Resetting selected items...
Check phone mode...
Phone already in Test mode, skip change...
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!
Settings Leave Factory defaults...
Set OK!

Elapsed: 00:00:03

Reading Phone Info....
SW ver : V 03.00 14-11-08 RH-112 (c) NMP
IMEI : 355238033923779
PPM : V 03.00
14-11-08
RH-112
(c) NMP
IC
DSP Ver : PR81_08w31_UPP
PCode : 0569746
BPCode : 0574232
HWID : 1000
LCDVer : INLX:SERIv81
NT7542
IMEI : 355238033923779
Sl Conf : 001-01-00000000000
Sl Prof : 000000000003000-2
Sl Aux : 000B0000
Hw Sig : 6CC75E72E1135605
Provider : Default Test Operator

Lock info:
Block 1
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 2
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 3
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 4
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 5
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 6
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 7
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;

Done!

[rizkypratama999]

registered to: rizkypratama

Connect phone on selected interface...

UFS S/N 73751 boot - Ok

Connect phone on selected interface...

Backup Certificates now...
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006010C192101001101
CMT EM0 ID : 00000232
CMT EM1 ID : 00000353
CMT PUB ID : 218002098B4D0052A69D291E5E889C675CF21323
CMT MODE ID : 00
CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID : 191EC665DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 00410001 , CMT , NOR
CMT Flash ID : 00410001 < SPANSION => 72NS256PD
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0
CMT Algo sent
CMT PAPUB : C0E691EA16A7593A9BB28832D7312A39F7ED668D05
Transmission mode : Dual (Ddr, TX2)

Boot Done!

CMT : Read NPC certificate...
Cert size : 12288 byte(s)
IMEI : 353080028978471
CMT : Read CCC certificate...
Cert size : 8192 byte(s)
CMT : Read HWC certificate...
Cert size : 12288 byte(s)
CMT : Read VARIANT certificate...
Cert size : 20480 byte(s)
Cert Read done!


Init Service mode... Wait...

Init service mode fail! Can't read flex keys
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\353080028978471_CR T_2nd.rpl

Connect phone on selected interface...

Core version : 1.22 , Rev : 4.5

Selected FlashSettings : Manual
Files Set for Flashing :
CNT : rm272__07.00.image_x
Check FlashFiles, Please, wait...
-> SWversion check skipped : Dead mode selected

Backup enabled, Will read Certificates now...
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006010C192101001101
CMT EM0 ID : 00000232
CMT EM1 ID : 00000353
CMT PUB ID : 218002098B4D0052A69D291E5E889C675CF21323
CMT MODE ID : 00
CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID : 191EC665DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 00410001 , CMT , NOR
CMT Flash ID : 00410001 < SPANSION => 72NS256PD
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0
CMT Algo sent
CMT PAPUB : C0E691EA16A7593A9BB28832D7312A39F7ED668D05
Transmission mode : Dual (Ddr, TX2)

Boot Done!

CMT : Read NPC certificate...
Cert size : 12288 byte(s)
IMEI : 353080028978471
CMT : Read CCC certificate...
Cert size : 8192 byte(s)
CMT : Read HWC certificate...
Cert size : 12288 byte(s)
CMT : Read VARIANT certificate...
Cert size : 20480 byte(s)
Cert Read done!


Init Service mode... Wait...

Init Service Mode Failed!
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\353080028978471_CR T_2nd.rpl

Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006010C192101001101
CMT EM0 ID : 00000232
CMT EM1 ID : 00000353
CMT PUB ID : 218002098B4D0052A69D291E5E889C675CF21323
CMT MODE ID : 00
CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID : 191EC665DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 00410001 , CMT , NOR
CMT Flash ID : 00410001 < SPANSION => 72NS256PD
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0
CMT Algo sent
CMT PAPUB : C0E691EA16A7593A9BB28832D7312A39F7ED668D05
Transmission mode : Dual (Ddr, TX2)

Boot Done!

ConvertImage: Processing rm272__07.00.image_x
ConvertImage: Page Size is 64K, converting...
ConvertImage: File converted
Transmission mode : Dual (Ddr, TX2)
Erase : Processing rm272__07.00.image_x_128
Found 1 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x01520000 - 0x01FDFFFF
Using TimeOut : 7 min ( 430 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:00:56
PrReq : NOR , 00
Transmission mode : Dual (Ddr, TX2)
Write : Processing rm272__07.00.image_x_128
Total writen 464 blocks
TIME : Write time : 00:00:49

PrReq : NOR , 00


Init Service mode... Wait...

Reading Phone Info....
Connected phone - Nokia 3500c
Software Info: V 06.60
21-05-08
RM-272
(c) Nokia.
IMEI: 353080028978471
Product code: 0549185
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Checking User Certificates...
Total - 0 certs
Uploading certificates...
Writen 21 certs!
AfterFlash operations done... Reconnect, wait...
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Resetting selected items...
Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!
Settings Leave Factory defaults...
Set OK!

Elapsed: 00:00:10

Reading User code...
User Code is: 12345
Done!

[rizkypratama999]

Flash cnt only
registered to: rizkypratama

Connect phone on selected interface...

UFS S/N 73751 boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Core version : 1.20 , Rev : 4.0

Selected FlashSettings : Manual
Files Set for Flashing :
CNT : rm495__06.65.image_x_blu
Check FlashFiles, Please, wait...
-> SWversion check skipped : Custom mode selected

Backup enabled, Will read Certificates now...
CRT308 Backup Created...
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006030C192101033000
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 08C0000336027D567E8352D85F991D65DA6EA0FE
CMT MODE ID : 00
CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 89820089 , CMT , NOR
CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo_v1331.fg , Rev : 0.0 Ver : 1.33.1
CMT Algo sent
CMT PAPUB : 917F11196FDB7378C18EF7260698CA4489DCA02700
Transmission mode : Dual (Ddr, TX2)

Boot Done!

CMT : Read NPC certificate...
Cert size : 20480 byte(s)
IMEI : 355212030412987
CMT : Read CCC certificate...
Cert size : 30600 byte(s)
CMT : Read HWC certificate...
Cert size : 20480 byte(s)
CMT : Read VARIANT certificate...
Cert size : 0 byte(s)
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\355212030412987.rp l

Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006030C192101033000
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 08C0000336027D567E8352D85F991D65DA6EA0FE
CMT MODE ID : 00
CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 89820089 , CMT , NOR
CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo_v1331.fg , Rev : 0.0 Ver : 1.33.1
CMT Algo sent
CMT PAPUB : 917F11196FDB7378C18EF7260698CA4489DCA02700
Transmission mode : Dual (Ddr, TX2)

Boot Done!

ConvertImage: Processing rm495__06.65.image_x_blu
ConvertImage: Page Size is 128K, no need convert
Transmission mode : Dual (Ddr, TX2)
Erase : Processing rm495__06.65.image_x_blu
Found 2 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x01DC0000 - 0x0215FFFF
CMT , NOR , Area : 0x02160000 - 0x03FBFFFF
Using TimeOut : 7 min ( 430 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:03:27
Transmission mode : Dual (Ddr, TX2)
Write : Processing rm495__06.65.image_x_blu
Total writen 816 blocks
TIME : Write time : 00:01:30


Init Service mode... Wait...

Reading Phone Info....
Connected phone - Nokia 5130c-2
Software Info: V 06.65
01-04-09
RM-495
(c) Nokia
IMEI: 355212030412987
Product code: 0578115
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Checking User Certificates...
Total - 0 certs
Uploading certificates...
Writen 21 certs!
AfterFlash operations done... Reconnect, wait...
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Resetting selected items...
Check phone mode...
Phone already in Test mode, skip change...
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!
Settings Leave Factory defaults...
Set OK!

Elapsed: 00:00:01

[rizkypratama999]

registered to: rizkypratama

Connect phone on selected interface...

UFS S/N 73751 boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Core version : 1.20 , Rev : 4.0

Selected FlashSettings : Manual
Files Set for Flashing :
PPM : rm783003.81.ppm_x
CNT : rm7830003.81.image_x
Check FlashFiles, Please, wait...
-> SWversion check skipped : Custom mode selected

Backup enabled, Will read Certificates now...
Backup CRT308
CRT308 Backup Created...
CRT308 Backup Created...
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006010C192101003000
CMT EM0 ID : 00000232
CMT EM1 ID : 00000352
CMT PUB ID : 023001115DB80054D80160E7D119682C559B7804
CMT MODE ID : 00
CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 002F0001 , CMT , NOR
CMT Flash ID : 002F0001 < SPANSION => 72NS256N
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0
CMT Algo sent
CMT PAPUB : 424306455C103E3853B304DD1BC0E10F839FBC9300
Transmission mode : Dual (Ddr, TX2)

Boot Done!

CMT : Read NPC certificate...
Cert size : 20480 byte(s)
IMEI : 357926009342846
CMT : Read CCC certificate...
Cert size : 0 byte(s)
CMT : Read HWC certificate...
Cert size : 0 byte(s)
CMT : Read VARIANT certificate...
Cert size : 20480 byte(s)
Cert Read done!

NPC Certificate saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\357926009342846.rp l

Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006010C192101003000
CMT EM0 ID : 00000232
CMT EM1 ID : 00000352
CMT PUB ID : 023001115DB80054D80160E7D119682C559B7804
CMT MODE ID : 00
CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 002F0001 , CMT , NOR
CMT Flash ID : 002F0001 < SPANSION => 72NS256N
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0
CMT Algo sent
CMT PAPUB : 424306455C103E3853B304DD1BC0E10F839FBC9300
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Transmission mode : Dual (Ddr, TX2)
Erase : Processing rm783003.81.ppm_x
Found 1 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x011E0000 - 0x016DFFFF
Using TimeOut : 7 min ( 430 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:00:24
Transmission mode : Dual (Ddr, TX2)
Write : Processing rm783003.81.ppm_x
Total writen 297 blocks
TIME : Write time : 00:00:31


ConvertImage: Processing rm7830003.81.image_x
ConvertImage: Page Size is 64K, converting...
ConvertImage: File converted
Transmission mode : Dual (Ddr, TX2)
Erase : Processing rm7830003.81.image_x_128
Found 1 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x016E0000 - 0x01FDFFFF
Using TimeOut : 7 min ( 430 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:00:49
Transmission mode : Dual (Ddr, TX2)
Write : Processing rm7830003.81.image_x_128
Total writen 192 blocks
TIME : Write time : 00:00:20


Init Service mode... Wait...

Reading Phone Info....
Datang memory full n semua folder ?
Sukses by best v 1.20 flash ppm n cnt sekalian bi
Connected phone - Nokia 6280
Software Info: V 03.81
09-05-06
RM-78
(c) Nokia
IMEI: 357926009342846
Product code: 0536162
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Checking User Certificates...
Total - 0 certs
Uploading certificates...
Repair user cert failed
AfterFlash operations done... Reconnect, wait...
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Resetting selected items...
Check phone mode...
Phone in Normal mode
Seting Test mode... wait...
Test mode set
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!
Settings Leave Factory defaults...
Set OK!

Elapsed: 00:00:11

[saeedullah_khan]

registered to: saeedullah_khan

Connect phone on selected interface...

UFS S/N 113742 boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Checking StartUp data ...
-----------------------
SDD Key status : SDData Damaged!!!!!
SimLock status : SimLock Damaged!!!!!
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL phone detected

Done!

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
WMDRM key found!
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006030C192101033000
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 2A90010859777D560E80A6479678AD314FED4FE0
CMT MODE ID : 00
CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 89820089 , CMT , NOR
CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0
CMT Algo sent
CMT PAPUB : 0C917F11196FDB7378C18EF7260698CA4489DCA027
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Preparing for write certificates...

Switching to CMT...

CMT : NPC erase Ok
Writing NPC... Ok

CMT : CCC erase Ok
Writing CCC... Ok

CMT : HWC erase Ok
Writing HWC... Ok


Init Service mode... Wait...

Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set

Writing SimLock Key... Ok!
Writing SimLock Data... Ok!

SDD Key status : SDData Damaged!!!!!
SimLock status : SimLock is Ok
Security status : Security is Ok


Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Repair SD procedure started...

Phone Imei: 354179034336671
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006030C192101033000
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 2A90010859777D560E80A6479678AD314FED4FE0
CMT MODE ID : 00
CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
CMT Loader sent, Boot Ok
rap= 2A90010859777D560E80A6479678AD314FED4FE0
hash= 9DDBFCFE6E73CED7D8C6268C8EB85723
key= F00C3EBFB6D0405E090B61FECE1165BFFB42AECD

Init Service mode... Wait...

Key file updated...
Check phone mode...
Phone already in Test mode, skip change...
Writing Super Dongle Key... Ok
Done!

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!!
-----------------------

PA_SimLock Version :
PA_SL3 phone detected

Done!

Local SX4 procedure started...

Phone Imei: 354179034336671
Key file exists, no need to read...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Done!

Uploading RF/Battery tune to phone...
Using : RM-495.pm
Operating mode is OK, no need change...

Field 1
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 9 write - Ok
Record 10 write - Ok
Record 11 write - Ok
Record 12 write - Ok
Record 13 write - Ok
Record 14 write - Ok
Record 15 write - Ok
Record 16 write - Ok
Record 17 write - Ok
Record 19 write - Ok
Record 20 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 17 write - Ok
Record 22 write - Ok

Check ST_SECURITY now...
Security status : ST_SECURITY => OK

Done!

Elapsed: 00:00:01

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL3 phone detected

Done!

Checking Camera Configuration...
Operating mode is OK, no need change...

CAM1 HW : NIMMIIIIRRFF094B2F01
CAM1 SW ver : XXXXXX [ SW damaged ]
Updating Camera #1 Configuration...
Upload done, checking...
CAM1 SW ver : 002014
Configuration Ok!

Secondary Camera #2 configuration info not exist

Done!

Reading Phone Info....
Connected phone - Nokia 5130c-2
Software ver : V 07.97 13-09-10 RM-495 (c) Nokia
IMEI : 354179034336671
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR72_10w01
APE Test:
PPM : V 07.97
13-09-10
RM-495
(c) Nokia
MEN
CNT : Content: mena_a1_bd_red
V 07.97
13-09-10
RM-495
(c) Nokia
Product SN : 0
Product code :
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 16
Tahvo : 22
Batery: 4706 mV
Camera:
CMT BT: 2222-302
APE BT:
APE HW:
LCDVer: SHARP
RF ic : 06540601
Lock info ===========
IMEI : 354179034336671
IMEI spNet :
IMEI svNet :

Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
User code : Crypted
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

[Mohsin-*]

Core version : 1.22 , Rev : 4.5

Selected FlashSettings : FullFlash
Files Set for Flashing :
MCU : rm495__07.97.mcusw
PPM : rm495__07.97.ppm_mena_a1
CNT : rm495__07.97.image_mena_a1_red
Check FlashFiles, Please, wait...
->  Check SW version...
FlashFile version : 07.97
Phone version : 07.97
13-09-10
RM-495
(c) Nokia            
->  Check SW version : Reflash
Backup enabled, Will read Certificates now...
SL3 Simlock read ... ok
WMDRM read ... ok
CRT308 Backup Created
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info : 
CMT ASICID   : 000000010000022600010006030C192101033000
CMT EM0 ID  : 00000296
CMT EM1 ID  : 00000B22
CMT PUB ID  : 10700112E5667D56871008308F925DA4B1725701
CMT MODE ID : 00
CMT R_HASH  : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID  : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg  ,  Rev : 0.0  Ver : 10.42.0 
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 89820089 , CMT , NOR
CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512
FLCNT   : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo_v1331.fg  ,  Rev : 0.0  Ver : 1.33.1 
CMT Algo sent
CMT PAPUB : 0C917F11196FDB7378C18EF7260698CA4489DCA027
Transmission mode :  Dual (Ddr, TX2) 

Boot Done!

CMT : Read NPC certificate...
Cert size : 20480 byte(s)
IMEI : 35932902220*****
CMT : Read CCC certificate...
Cert size : 30600 byte(s)
CMT : Read HWC certificate...
Cert size : 20480 byte(s)
CMT : Read VARIANT certificate...
Cert size : 0 byte(s)
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\359329022202****.rpl

Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info : 
CMT ASICID   : 000000010000022600010006030C192101033000
CMT EM0 ID  : 00000296
CMT EM1 ID  : 00000B22
CMT PUB ID  : 10700112E5667D56871008308F925DA4B1725701
CMT MODE ID : 00
CMT R_HASH  : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID  : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg  ,  Rev : 0.0  Ver : 10.42.0 
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 89820089 , CMT , NOR
CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512
FLCNT   : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo_v1331.fg  ,  Rev : 0.0  Ver : 1.33.1 
CMT Algo sent
CMT PAPUB : 0C917F11196FDB7378C18EF7260698CA4489DCA027
Transmission mode :  Dual (Ddr, TX2) 

Boot Done!

Transmission mode :  Dual (Ddr, TX2) 
Erase : Processing rm495__07.97.mcusw
Found 6 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x00000000 - 0x000006BF
CMT , NOR , Area : 0x000006C0 - 0x0001FFFF
CMT , NOR , Area : 0x00040000 - 0x000BFFFF
CMT , NOR , Area : 0x000C0000 - 0x0013FFFF
CMT , NOR , Area : 0x00140000 - 0x0137FFFF
CMT , NOR , Area : 0x01380000 - 0x0151FFFF
Using TimeOut : 7 min ( 430 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:01:38
PrReq : NOR , 00
Transmission mode :  Dual (Ddr, TX2) 
Write : Processing rm495__07.97.mcusw
CMT: Writing Hash CERT [NOLO]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
Total writen 1169 blocks
TIME : Write time : 00:02:30 

PrReq : NOR , 00

Transmission mode :  Dual (Ddr, TX2) 
Erase : Processing rm495__07.97.ppm_mena_a1
Found 1 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x01520000 - 0x01DBFFFF
Using TimeOut : 7 min ( 430 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:00:32
PrReq : NOR , 00
Transmission mode :  Dual (Ddr, TX2) 
Write : Processing rm495__07.97.ppm_mena_a1
Total writen 388 blocks
TIME : Write time : 00:00:49 

PrReq : NOR , 00

ConvertImage: Processing rm495__07.97.image_mena_a1_red
ConvertImage: Page Size is 128K, no need convert
Transmission mode :  Dual (Ddr, TX2) 
Erase : Processing rm495__07.97.image_mena_a1_red
Found 2 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x01DC0000 - 0x0215FFFF
CMT , NOR , Area : 0x02160000 - 0x03FBFFFF
Using TimeOut : 7 min ( 430 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:01:51
PrReq : NOR , 00
Transmission mode :  Dual (Ddr, TX2) 
Write : Processing rm495__07.97.image_mena_a1_red
Total writen 656 blocks
TIME : Write time : 00:01:24 

PrReq : NOR , 00


Init Service mode... Wait...

Reading Phone Info....
Connected phone -   Nokia 5130c-2
Software Info:     V 07.97
13-09-10
RM-495
(c) Nokia            
IMEI:  35932902220****
Product code:  0576445
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Checking User Certificates...
Total - 0 certs
Uploading certificates...
Writen 21 certs!
AfterFlash operations done... Reconnect, wait...
Connect phone on selected interface...

Phone found!
Series 40 Device detected! 
read info...  - Ok

[saeedullah_khan]

Phone found!
Series 40 Device detected!
read info... - Ok

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL phone detected

Done!

Checking Camera Configuration...
Check phone mode...
Phone in Normal mode
Seting Local mode... wait...
Local mode set

CAM1 HW : NIMMIIIIRRFF0A021001
CAM1 SW ver : XXXXXX [ SW damaged ]
Updating Camera #1 Configuration...
Upload done, checking...
CAM1 SW ver : 002007
Configuration Ok!

Secondary Camera #2 configuration info not exist

Done!

[sameera]

Core version : 1.22 , Rev : 4.5

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm217__07.30.mcusw
PPM : rm217__07.30.ppm_c
CNT : rm217__07.30.image_c_tr
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Getting product info...
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response.
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006010C192101001101
CPU ID : RAP3Gv3 , Features : No any extended features
RAP_PUB: 0B300218DB916B5649371A37599EBA7F1C191DB6
CMT_ROOT: BAF3A9C3DBFA8454937DB77F2B8852B1
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
Processing PASUBTOC...
TIME : Boot time : 00:00:05
Reopening the connection...
Waiting for response: 30
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Check data
ADL : Data accepted
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing rm217__07.30.mcusw
Found 9 areas to erase
Erasing area 0x00000000 - 0x000006BF, NOR, CMT
Result: 0000
Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT
Result: 0000
Erasing area 0x00020000 - 0x0007FFFF, NOR, CMT
Result: 0000
Erasing area 0x00080000 - 0x000DFFFF, NOR, CMT
Result: 0000
Erasing area 0x00100000 - 0x001FFFFF, NOR, CMT
Result: 0000
Erasing area 0x00200000 - 0x0031FFFF, NOR, CMT
Result: 0000
Erasing area 0x00320000 - 0x0105FFFF, NOR, CMT
Result: 0000
Erasing area 0x01060000 - 0x01067FFF, NOR, CMT
Result: 0000
Erasing area 0x01068000 - 0x0107FFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:01:11
Write : Processing rm217__07.30.mcusw
Total 944 [944/0/0] blocks to write, writing...
CMT : Writing Hash CERT [NOLO]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [UPDAPP]
CMT : Writing Hash CERT [DSP0]
CMT : Writing Hash CERT [MCUSW]
CMT : Writing Hash CERT [PMM_CONF]
CMT : Writing Hash CERT [SBIF_CONF]
TIME : Write time : 00:01:16
MCU Write done
===Flashing [PPM]===
Erase : Processing rm217__07.30.ppm_c
Found 1 areas to erase
Erasing area 0x01080000 - 0x015FFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:00:19
Write : Processing rm217__07.30.ppm_c
Total 289 [289/0/0] blocks to write, writing...
TIME : Write time : 00:00:23
PPM Write done
===Flashing [CNT]===
Erase : Processing rm217__07.30.image_c_tr
Found 1 areas to erase
Erasing area 0x01600000 - 0x01FDFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:00:48
Checking content info...
Resetting phone...
Checking CNT sector PN<>FL
PN CNT sector : 128 kb
ConvertImage: Processing rm217__07.30.image_c_tr
ConvertImage: Page Size is 64K, converting...
ConvertImage: File converted
Loader len: 248320, CHK: 36E3
ADL -> Sending loader...
Reset connection...
ADL : Check data
ADL : Data accepted
ADL : ASIC CMT select Ok
Write : Processing rm217__07.30.image_c_tr_128
Total 224 [224/0/0] blocks to write, writing...
TIME : Write time : 00:00:17
CNT Write done
ADL : End flashing

Flashing done!
Total flash time : 00:04:17
Reboot phone now...

Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Checking User Certificates...
Total - 0 certs
Uploading certificates...
Writen 21 certs!
AfterFlash operations done... Reconnect, wait...
Done!

Elapsed: 00:04:59

Connect phone on selected interface...

[sameera]

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Format File System...
Check phone mode...
Phone in Normal mode
Seting Local mode... wait...
Local mode set
Scanning FS parametres...
Checking Data...
Detected : 2 drive(s)...
Start formating....
Using Series 60 format algorithm...
==================================
Formating drive : C now...
Step1 : OK
Step2 : OK
End format...
==================================
Formating drive : D now...
Step1 : OK
Step2 : OK
End format...
==================================
Done!

Resetting selected items...
Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!
Settings Leave Factory defaults...
Set OK!

Elapsed: 00:00:16

Set phone in Normal mode...
Restarting...
Done!

Reading Phone Info....
Connected phone - Nokia N73
Software ver : V 05wk47v38.1 19-01-07 RM-133 (c) Nokia.
IMEI : 357652011025266
Ape Ver : V 3.0705.1.0.31 26-01-2007 RM-133
APE Var : V 3.0705.1.0.31-08 26-01-2007 RM-133
APE ADSP: 256
DSP Ver : scarfe_05wk46v41
APE Test:
PPM :
CNT :
Product SN : CIM024352
Product code : 0537289
Base Prd.code: 0537044
Module code : 0202855
Long Prod.SN :
Hardware info=======
HWID : 7200
Retu : 15
Tahvo : 22
Batery: 3992 mV
Camera:
CMT BT:
APE BT:
APE HW: 1
LCDVer:
RF ic :
Lock info ===========
IMEI : 357652011025266
IMEI spNet : 3A 75 56 02 11 20 25 06
IMEI svNet : 33 75 56 02 11 20 25 26 F4

Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created

User Code : 12345
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!