GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)
-   -   Successfully unlocked/repaired phones by Infinity-Box (https://forum.gsmhosting.com/vbb/f296/successfully-unlocked-repaired-phones-infinity-box-725574/)

raychevski 12-14-2011 12:11

Core version : 1.30 Rev : 1.1

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm243_06.01_prd_core.fpsx
PPM : rm243_06.01_prd_vB05_01_russian.fpsx
CNT : rm243_06.01_prd_UDA_Nokia_Noir.fpsx
Flashing phone now...
Check files done...
-> Check SW version...
FlashFile version : 06.01
Phone version : 03.83
-> Check SW version : Upgrade
Backup CRT308 data...
CRT308 Backup Created
SLx Simlock Data read ... ok
SL2 Simlock read ... ok
SimLock Data saved...
SimLock Key saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\359850010025919_SI M.rpl

Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Gathering phone info...
Check communication with phone...
Reboot....
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101021103
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 0D600009A8590052CF883AED92756B34591FBFEE
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP ...
Processing PASUBTOC ...
Boot Done! :)
TIME : Boot time : 00:00:04
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL Server confirm flashmode!
Get req info : empty
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing rm243_06.01_prd_core.fpsx
Found 3 areas to erase
Erasing area 0x00040000 - 0x00082FFF, NAND, CMT
Result: 0000
Erasing area 0x00083400 - 0x0087FFFF, NAND, CMT
Result: 0000
Erasing area 0x00B80000 - 0x04DFFFFF, NAND, CMT
Result: 0000
Partition erase not allowed by loader
Partitioning : Ok [5]
TIME : Erase time : 00:00:01
Write : Processing rm243_06.01_prd_core.fpsx
Total 385 [385/0/0] blocks to write, writing...
CMT : Writing Hash CERT [ADA]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [RAP3NAND]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [SOS*UPDAPP]
CMT : Writing Hash CERT [SOS*DSP0]
CMT : Writing Hash CERT [SOS*ISASW]
CMT : Writing Hash CERT [SOS*CORE]
CMT : Writing Hash CERT [SOS+ROFS]
TIME : Write time : 00:00:57
MCU Write done
===Flashing [PPM]===
Erase : Processing rm243_06.01_prd_vB05_01_russian.fpsx
Found 1 areas to erase
Erasing area 0x03300000 - 0x04DFFFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing rm243_06.01_prd_vB05_01_russian.fpsx
Total 178 [178/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS+ROFX]
TIME : Write time : 00:00:29
PPM Write done
===Flashing [CNT]===
Erase : Processing rm243_06.01_prd_UDA_Nokia_Noir.fpsx
Found 1 areas to erase
Erasing area 0x04E00000 - 0x07B3FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing rm243_06.01_prd_UDA_Nokia_Noir.fpsx
Total 1 [1/0/0] blocks to write, writing...
TIME : Write time : 00:00:00
CNT Write done
=================
ADL : End flashing
ADL : Finalize...

Flashing done!
Total flash time : 00:01:28
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 6120
Software Info: V 06.01 02-09-08 RM-243 (c) Nokia
IMEI: 359850010025919
Ape Version: 06.01
Product code: 0552630
Checking...
SimLock status : Can't get status
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Set phone to Normal mode...

AfterFlash operations done ;D
Done!

Elapsed: 00:01:47
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Namangan 12-14-2011 12:31

Succesfully flashed C2
card found: S/N -----
registered to: Akramjon

Connect phone on selected interface...

Core version : 1.30 Rev : 1.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm721__11.10.mcusw
PPM : rm721__11.10.ppm_e
CNT : rm721__11.10.image_e_059D5D3_006
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600000001020C192102044100
CPU ID : RAP3Gv4 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: 2250020D91E358401F27B9CE611C0009A6EF7DAB
ASIC MODE ID: 00
ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
ROM ID: 67E82268F29CEA60
Use RAP3Gv40_2nd.fg , Rev : 3.0 Ver : 11.34.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAP3Gv40_XSR17_alg.fg , Rev : 3.0 Ver : 11.34.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:05
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 8443ECD57D2EDADDAADBAD248F1B3B559E14D184
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 358607046004313
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\358607046004313_CR T.rpl

===Flashing [MCU]===
Erase : Processing rm721__11.10.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm721__11.10.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 134 blocks
TIME : Write time : 00:00:35
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [PPM]===
Erase : Processing rm721__11.10.ppm_e
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm721__11.10.ppm_e
Total writen 26 blocks
TIME : Write time : 00:00:07
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [CNT]===
Erase : Processing rm721__11.10.image_e_059D5D3_006
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm721__11.10.image_e_059D5D3_006
Total writen 68 blocks
TIME : Write time : 00:00:21
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot

Flashing done!
Total flash time : 00:01:06
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia C2-01
Software Info: V 11.10 13-05-11 RM-721 (c) Nokia
IMEI: 358607046004313
PPM version : V 11.10 13-05-11 RM-721 (c) Nokia E
Product code: 059D5M5
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Checking User Certificates...
Total - 34 certs
Data exist, skip certificate repair...
AfterFlash operations done ;D
Done!

Elapsed: 00:01:37
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...

raychevski 12-14-2011 13:00

Core version : 1.30 Rev : 1.1

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm20030004.100.mcusw
PPM : rm2003004.10.ppm_i
CNT : rm20030004.10.image_i
Flashing phone now...
Check files done...
-> Check SW version...
FlashFile version : 04.10
Phone version : 04.10 21-12-06 RM-200 (c) Nokia
-> Check SW version : Reflash
Backup CRT308 data...
CRT308 Backup Created
Getting product info...
RAP_BOOT: 0803000002010000
RAP_PUBLIC: 0B800109149701545069BDF927C3D419590FC4CF
CMT_ROOTKEY: BAF3A9C3DBFA8454937DB77F2B8852B1
RAP_PAPUBKEY: 261C8D4E30412FC576EAF46275B6DC1B895A84ED
Checking CNT sector PN<>FL
PN CNT sector : 64 kb
Loader len: 225152, CHK: 03D5
ADL -> Sending loader...
Update Server code succesfully sent to phone!
TIME : Boot time : 00:00:04
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
Waiting for response: 28
Waiting for response: 27
Waiting for response: 26
Waiting for response: 25
Waiting for response: 24
ADL Server confirm flashmode!
===Flashing [MCU]===
Erase : Processing rm20030004.100.mcusw
Found 9 areas to erase
Erasing area 0x00000000 - 0x000202BF, NOR, CMT
Result: 0000
Erasing area 0x00020300 - 0x000252FF, NOR, CMT
Result: 0000
Erasing area 0x00020000 - 0x0007FFFF, NOR, CMT
Result: 0000
Erasing area 0x00080000 - 0x000DFFFF, NOR, CMT
Result: 0000
Erasing area 0x00200000 - 0x0037FFFF, NOR, CMT
Result: 0000
Erasing area 0x00380000 - 0x011DDFFF, NOR, CMT
Result: 0000
Erasing area 0x011DE000 - 0x011DEFFF, NOR, CMT
Result: 0000
Erasing area 0x011DF000 - 0x011DFFFF, NOR, CMT
Result: 0000
Erasing area 0x00100000 - 0x001FFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:01:41
Write : Processing rm20030004.100.mcusw
Total 965 [965/0/0] blocks to write, writing...
CMT : Writing Hash CERT [NOLO]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [UPDAPP]
CMT : Writing Hash CERT [DSP0]
CMT : Writing Hash CERT [MCUSW]
CMT : Writing Hash CERT [PMM_CONF]
CMT : Writing Hash CERT [SBIF_CONF]
TIME : Write time : 00:01:48
MCU Write done
===Flashing [PPM]===
Erase : Processing rm2003004.10.ppm_i
Found 1 areas to erase
Erasing area 0x011E0000 - 0x016DFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:00:20
Write : Processing rm2003004.10.ppm_i
Total 182 [182/0/0] blocks to write, writing...
TIME : Write time : 00:00:20
PPM Write done
===Flashing [CNT]===
Erase : Processing rm20030004.10.image_i
Found 2 areas to erase
Erasing area 0x04000000 - 0x05FEFFFF, NOR, CMT
Result: 0000
Erasing area 0x01D00000 - 0x01FDFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:04:00
Write : Processing rm20030004.10.image_i
Total 256 [256/0/0] blocks to write, writing...
TIME : Write time : 00:00:28
CNT Write done
ADL : End flashing

Flashing done!
Total flash time : 00:08:40
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 6151
Software Info: V 04.10 21-12-06 RM-200 (c) Nokia
IMEI: 352743017980961
PPM version : V 04.10 21-12-06 RM-200 (c) Nokia I
Product code: 0541277
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Set phone to Normal mode...

AfterFlash operations done ;D
Done!

Elapsed: 00:09:13

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

raychevski 12-14-2011 15:10

Core version : 1.30 Rev : 1.1

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm414__05.60.mcusw
PPM : rm414__05.60.ppm_i
CNT : rm414__05.60_ISM_009.image_i_bg_black
Flashing phone now...
Check files done...
-> Check SW version...
FlashFile version : 05.60
Phone version : 04.81 29-07-08 RM-414 (c) Nokia
-> Check SW version : Upgrade
Backup CRT308 data...
CRT308 Backup Created
SLx Simlock Data read ... ok
SL2 Simlock read ... ok
WMDRM read ... ok
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\356383023135767_SI M.rpl

Getting product info...
RAP_BOOT: 0803000202010000
RAP_PUBLIC: 18700107F01E0354086F083D2EBB6338BC2E551B
CMT_ROOTKEY: 9DDBFCFE6E73CED7D8C6268C8EB85723
RAP_PAPUBKEY: A4B03CEB0AC8A915C4ECE9894BC44D6CE68F3AA4
Checking CNT sector PN<>FL
PN CNT sector : 128 kb
ConvertImage: Processing rm414__05.60_ISM_009.image_i_bg_black
ConvertImage: Page Size is 128K, no need convert
Loader len: 302272, CHK: D2C2
ADL -> Sending loader...
Update Server code succesfully sent to phone!
TIME : Boot time : 00:00:05
Reopening the connection...
Waiting for response: 30
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Check data
ADL : Data accepted
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing rm414__05.60.mcusw
Found 5 areas to erase
Erasing area 0x00000000 - 0x0001FFFF, NOR, CMT
Result: 0000
Erasing area 0x00040000 - 0x000BFFFF, NOR, CMT
Result: 0000
Erasing area 0x000C0000 - 0x0013FFFF, NOR, CMT
Result: 0000
Erasing area 0x01780000 - 0x0197FFFF, NOR, CMT
Result: 0000
Erasing area 0x00140000 - 0x0177FFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:01:34
Write : Processing rm414__05.60.mcusw
Total 116 [116/0/0] blocks to write, writing...
CMT : Writing Hash CERT [NOLO]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [UPDAPP]
CMT : Writing Hash CERT [DSP0]
CMT : Writing Hash CERT [MCUSW]
TIME : Write time : 00:01:40
MCU Write done
===Flashing [PPM]===
Erase : Processing rm414__05.60.ppm_i
Found 1 areas to erase
Erasing area 0x01980000 - 0x021BFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:00:29
Write : Processing rm414__05.60.ppm_i
Total 30 [30/0/0] blocks to write, writing...
TIME : Write time : 00:00:32
PPM Write done
===Flashing [CNT]===
Erase : Processing rm414__05.60_ISM_009.image_i_bg_black
Found 2 areas to erase
Erasing area 0x02620000 - 0x03F9FFFF, NOR, CMT
Result: 0000
Erasing area 0x021C0000 - 0x0261FFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:02:10
Write : Processing rm414__05.60_ISM_009.image_i_bg_black
Total 39 [39/0/0] blocks to write, writing...
TIME : Write time : 00:00:38
CNT Write done
ADL : End flashing

Flashing done!
Total flash time : 00:07:06
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 6600 slide
Software Info: V 05.60 10-12-08 RM-414 (c) Nokia
IMEI: 356383023135767
PPM version : V 05.60 10-12-08 RM-414 (c) Nokia I
Product code: 0570364
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Set phone to Normal mode...

AfterFlash operations done ;D
Done!

Elapsed: 00:07:37

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

KYEJUSA 12-14-2011 15:57

OT-209X UNLOCKED
module v4.12
Device: Alcatel-209X
Checking data, wait...
advanced flash detection enabled
Action: rebuild security area
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A08]...
CPU: MT6223
high speed boot On
chip: 0011:7B13:A00C
status: 01
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 8C22F60000000D:2BEA0000000000
flash: AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
otp offset: 003F0000
number of flash chip/regions detected: 01/01
Initialize Done
====> Set baud ...
115200
Set baud Done
====> Initialize bootcode ...
interesting cpu type found
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: [standard] type (05)
TCL-ID is present
rom info detection finished
TCL-ID detection...
TCL-ID detection done
rom info ver: 05
sw version: JRD23_NEP_08A_PCB01_GSM_MT6223_S00.MAUI_08A_W08_36 _SP1_V28_F1.BIN
project-id: MAUI.08A.W08.36.SP1.V28.F1, 00000000
code offset: 00000000
ffs offset/size [01]: 003A0000/00058000
TCL-ID identification
version: 76S
provider: 209X-2ARGUG9
customization: CM76CE80
customization: XM76CE80
TCL-ID identification done
rom info structure: [standard] type (05)
TCL-ID is present
ffs/eeprom address assigned: 003A0000
sec info (detailed) detection...
searching sec info#1...
search sec info#1 finished
sim-lock status: disabled
product id: JRD_COMMUNICATION_U91X_PRODUCTS
area1 is valid
area2 is valid
area3 is valid
area4 is valid
searching sec info#2...
.
search sec info#2 finished
security area (sec info, cust) calculation...
identification header detected
customization: XM76CE80
customization name adjusted
flash: 8C22F60000000D:2BEA0000000000
flash: 8C22F60000000D:2BEA0000000000
Write: security area (sec info, cust)
security area (sec info, cust) calculation done
security area (sec info, hash) calculation...
..................security area (sec info, hash) detecting size...
security area (sec info, hash) detecting parameters...
security area (sec info, hash) encoding...
done
flash: 8C22F60000000D:2BEA0000000000
flash: 8C22F60000000D:2BEA0000000000
Write: security area (sec info, hash)
security area (sec info, hash) calculation done
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
original imei: FFFFFFFFFFFFFF
flash: 8C22F60000000D:2BEA0000000000
Backup required data Done
====> Patch required data ...
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
Write Done
====> Finalization ...
ffs formatting...
flash: 8C22F60000000D:2BEA0000000000
Finalization Done
file saved: c:\InfinityBox\MModule\backup_security\Alcatel-209X_JRD23_NEP_08A_PCB01_GSM_MT6223_S00.MAUI_08A_W 08_36_SP1_V28_F1__system_log__00000000_20111214-165234.B0X.bin
Finished, time used: 1 min 59 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

braham12 12-15-2011 00:22

COM6 [VCP0] selected
module v4.11
Device: Alcatel-355X, 355A
Checking data, wait...
advanced flash detection enabled
Action: repair security area
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A08]...
CPU: MT6223
high speed boot On
chip: 0011:83AD:A00C
status: 01
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: EC240200010000:2BEA0000000000
flash: Samsung K5L2833ATA T 16Mb
otp offset: 00FF0000
number of flash chip/regions detected: 01/01
Initialize Done
====> Set baud ...
115200
Set baud Done
====> Initialize bootcode ...
interesting cpu type found
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: [protected] type (05), 1 record(s)
TCL-ID is present
startup code area #1 is Ok
startup code area #1 backup saved: c:\InfinityBox\MModule\backup_security\id.3A3EE513 .[JRD23_08A_PCB01_GPRS_MT6223P_S00.MAUI_08A_W08_36_S P1_V34.BIN_DA8A30F2].rpl
rom info detection finished
TCL-ID detection...
TCL-ID detection done
device-id: 3A3EE513
rom info ver: 05
sw version: JRD23_08A_PCB01_GPRS_MT6223P_S00.MAUI_08A_W08_36_S P1_V34.BIN
project-id: MAUI.08A.W08.36.SP1.V34, F2308ADA
code offset: 00000000
ffs offset/size [01]: 00C00000/00400000
TCL-ID identification
version: 46B
provider: 355A-2DAVDO3
customization: CI46NK63
customization: XI46NK63
TCL-ID identification done
rom info structure: [protected] type (05), 1 record(s)
TCL-ID is present
ffs/eeprom address assigned: 00C00000
startup code area #1 check...
startup code area #1 fixed
sec info (fast) detection...
searching sec info#1...
search sec info#1 finished
searching sec info#2...
.
search sec info#2 finished
security area (sec info, cust) calculation...
identification header detected
relocation table detected
name table[00] #7000000 detected
customization: CI46NK63
customization name adjusted
customization: CI46NK63
customization name adjusted
customization detected: CI46NK63
customization: CI46NK63
flash: EC240200010000:2BEA0000000000
flash: EC240200010000:2BEA0000000000
Write: security area (sec info, cust)
security area (sec info, cust) calculation done
security area (sec info, hash) calculation...
..................security area (sec info, hash) detecting size...
security area (sec info, hash) detecting parameters...
security area (sec info, hash) encoding...
done
flash: EC240200010000:2BEA0000000000
flash: EC240200010000:2BEA0000000000
Write: security area (sec info, hash)
security area (sec info, hash) calculation done
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
original imei: FFFFFFFFFFFFFF
flash: EC240200010000:2BEA0000000000
Backup required data Done
====> Patch required data ...
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
Write Done
====> Finalization ...
ffs formatting...
flash: EC240200010000:2BEA0000000000
Finalization Done
file saved: c:\InfinityBox\MModule\backup_security\Alcatel-355X,355A_JRD23_08A_PCB01_GPRS_MT6223P_S00.MAUI_08 A_W08_36_SP1_V34__system_log_3A3EE513_DA8A30F2_201 11214-191832.B0X.bin
Finished, time used: 3 min 16 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

Rhyan777 12-15-2011 06:13

Done by BEST,,,,,,,,, :D

Code:

card found: S/N VAH-777
registered to: Rhyan

Connect phone on selected interface...

UFS S/N TWISTER boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Core version : 1.30  Rev : 1.1

Selected FlashSettings : Manual
Files Set for Flashing :
MCU : rm635__10.65.mcusw
PPM : rm635__10.65.ppm_t
CNT : rm635__10.65.image_t_pink_ph
Check FlashFiles, Please, wait...
-> SWversion check skipped : Manual mode selected

Backup enabled, Will read Certificates now...
SLx Simlock Data read ... ok
SL3 Simlock Sign read ... ok
WMDRM read ... ok
CRT308 Backup Created
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID  : 000000010000022600010006030C192101033000
CMT EM0 ID  : 00000296
CMT EM1 ID  : 00000B22
CMT PUB ID  : 27E00116A6810156D78334E914D0A9D91A81BFCA
CMT MODE ID : 00
CMT R_HASH  : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID  : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg  ,  Rev : 0.0  Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 89820089 , CMT , NOR
CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512
FLCNT  : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo_v1331.fg  ,  Rev : 0.0  Ver : 1.33.1
CMT Algo sent
CMT PAPUB : C6B9354E81AC464DED33FC7B90295086150F453935
Transmission mode :  Dual (Ddr, TX2)

Boot Done!

CMT : Read NPC certificate...
Cert size : 20480 byte(s)
IMEI : 353753043333803
CMT : Read CCC certificate...
Cert size : 30600 byte(s)
CMT : Read HWC certificate...
Cert size : 20480 byte(s)
CMT : Read VARIANT certificate...
Cert size : 0 byte(s)
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\VAH-777_2nd.rpl

Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID  : 000000010000022600010006030C192101033000
CMT EM0 ID  : 00000296
CMT EM1 ID  : 00000B22
CMT PUB ID  : 27E00116A6810156D78334E914D0A9D91A81BFCA
CMT MODE ID : 00
CMT R_HASH  : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID  : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg  ,  Rev : 0.0  Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 89820089 , CMT , NOR
CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512
FLCNT  : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo_v1331.fg  ,  Rev : 0.0  Ver : 1.33.1
CMT Algo sent
CMT PAPUB : C6B9354E81AC464DED33FC7B90295086150F453935
Transmission mode :  Dual (Ddr, TX2)

Boot Done!

Transmission mode :  Dual (Ddr, TX2)
Erase : Processing rm635__10.65.mcusw
Found 6 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x00000000 - 0x000006BF
CMT , NOR , Area : 0x000006C0 - 0x0001FFFF
CMT , NOR , Area : 0x00040000 - 0x000BFFFF
CMT , NOR , Area : 0x000C0000 - 0x0013FFFF
CMT , NOR , Area : 0x00140000 - 0x0137FFFF
CMT , NOR , Area : 0x01380000 - 0x0151FFFF
Using TimeOut : 7 min ( 430 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:01:31
PrReq : NOR , 00
Transmission mode :  Dual (Ddr, TX2)
Write : Processing rm635__10.65.mcusw
CMT: Writing Hash CERT [NOLO]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
Total writen 1156 blocks
TIME : Write time : 00:02:26

PrReq : NOR , 00

Transmission mode :  Dual (Ddr, TX2)
Erase : Processing rm635__10.65.ppm_t
Found 1 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x01520000 - 0x01DBFFFF
Using TimeOut : 7 min ( 430 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:00:19
PrReq : NOR , 00
Transmission mode :  Dual (Ddr, TX2)
Write : Processing rm635__10.65.ppm_t
Total writen 242 blocks
TIME : Write time : 00:00:29

PrReq : NOR , 00

ConvertImage: Processing rm635__10.65.image_t_pink_ph
ConvertImage: Page Size is 128K, no need convert
Transmission mode :  Dual (Ddr, TX2)
Erase : Processing rm635__10.65.image_t_pink_ph
Found 2 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x01DC0000 - 0x0215FFFF
CMT , NOR , Area : 0x02160000 - 0x03FBFFFF
Using TimeOut : 7 min ( 430 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:03:51
PrReq : NOR , 00
Transmission mode :  Dual (Ddr, TX2)
Write : Processing rm635__10.65.image_t_pink_ph
Total writen 472 blocks
TIME : Write time : 00:00:57

PrReq : NOR , 00


Init Service mode... Wait...

Reading Phone Info....
Connected phone -  Nokia 2690
Software Info:    V 10.65
09-12-10
RM-635
(c) Nokia           
IMEI:  VAH-777
Product code:  0592395
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Checking User Certificates...
Total - 0 certs
Uploading certificates...
Writen 21 certs!
AfterFlash operations done ;D
Connect phone on selected interface...

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Restoring UserData : [PhoneBook]
Generation mode    : [S40]
Check phone mode...
Phone in Test mode
Seting Local mode... wait...
Local mode set
Writing Phonebook...
88 phonebook records write ok!
Done...

BEST is the BEST,,,, ;)



Br,.
Rhyan

md_amin 12-15-2011 10:16

Tesco-Mobile-Mojo-Chat unlock done.

COM10 [VCP0] selected
module v4.12
Action: "sp-unlock"
unlock method: smart fast
Model: Tesco-Mobile-Mojo-Chat
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6253:8A02:8A00]...
CPU: MT6253
high speed boot On
chip: 0000:0000:000F
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6253,E02
Date: 2000.00.00
Version: 1.0
Version: MOJO_CHAT_C200UK_V3.5_110616
Version:
86 byte(s) read
imei: 35762804063008
connection Ok
192 byte(s) read
reading data...
reading data #2...
building new data...
writing data...
180 byte(s) read
reading data...
188 byte(s) read
building new data...
writing data...
verifying...
verification Ok
done
Finished, time used: 16 sec
Remove/Install battery now !

totmititelu 12-15-2011 12:30

unlock motorola W375 ok
 
COM1 [Serial1] selected
Action: unlock
Device: W375
Checking data, wait...
Connect...
Press and HOLD Power button...
rom version: 0411
Connecting...
initial boot phase complete
Release Power button !
Connect Done
Boot...
Boot Done
Set Baud...
115200
Set Baud Done
Check Flash-1...
SW version: 0.0.73
HW version: MOTOROLA_H80S
LP ver: 0073_010
Flex ver: FLEX_DZ_006
cpu id: 08B6
imei eeprom: 3558380189962810
required SW version: 0.0.73
sp-locked: 22610.
Check Flash-1 Done
Check Flash-2...
reading ...
file saved: C:\InfinityBox\Moto01\backup_eeprom_calibration_35 583801899628_20111215-132423.34E.bin
unlock step-1 Ok
unlock step-2 Ok
unlock step-3 Ok
unlock step-4 Ok
unlock step-5 Ok
finished Ok
Finished, time used: 67 sec
Remove/Install battery now !

KYEJUSA 12-15-2011 14:32

OT-300X UNLOCKED SUCCESSFULY
module v4.12
Device: Alcatel-300X
Checking data, wait...
advanced flash detection enabled
Action: rebuild security area
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
high speed boot On
chip: 0011:AEDB:A00C
status: 01
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: EC240200000000:2BEA0000000000
flash: Samsung K5L2833ATA T 16Mb
otp offset: 00FF0000
number of flash chip/regions detected: 01/01
Initialize Done
====> Set baud ...
115200
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: [protected] type (05), 1 record(s)
TCL-ID is present
startup code area #1 is Ok
startup code area #1 backup saved: c:\InfinityBox\MModule\backup_security\id.51573261 .[JRD23_08A_PCB01_GPRS_MT6223P_S00.MAUI_08A_W08_36_S P1_V34.BIN_F75461B5].rpl
rom info detection finished
TCL-ID detection...
TCL-ID detection done
device-id: 51573261
rom info ver: 05
sw version: JRD23_08A_PCB01_GPRS_MT6223P_S00.MAUI_08A_W08_36_S P1_V34.BIN
project-id: MAUI.08A.W08.36.SP1.V34, B56154F7
code offset: 00000000
ffs offset/size [01]: 00C00000/00400000
TCL-ID identification
version: F32
provider: 300X-2BRGKE9
customization: CPF3CG10
customization: XPF3CG10
TCL-ID identification done
rom info structure: [protected] type (05), 1 record(s)
TCL-ID is present
ffs/eeprom address assigned: 00C00000
startup code area #1 check...
startup code area #1 fixed
sec info (detailed) detection...
searching sec info#1...
search sec info#1 finished
sim-lock status: enabled
product id: JRD_COMMUNICATION_U82X_PRODUCTS
area1 is valid
area2 is valid
area3 is valid
area4 is valid
searching sec info#2...
.
search sec info#2 finished
security area (sec info, cust) calculation...
identification header detected
customization: XPF3CG10
customization name adjusted
flash: EC240200000000:2BEA0000000000
flash: EC240200000000:2BEA0000000000
Write: security area (sec info, cust)
security area (sec info, cust) calculation done
security area (sec info, hash) calculation...
..................security area (sec info, hash) detecting size...
security area (sec info, hash) detecting parameters...
security area (sec info, hash) encoding...
done
flash: EC240200000000:2BEA0000000000
flash: EC240200000000:2BEA0000000000
Write: security area (sec info, hash)
security area (sec info, hash) calculation done
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
original imei: FFFFFFFFFFFFFF
flash: EC240200000000:2BEA0000000000
Backup required data Done
====> Patch required data ...
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
Write Done
====> Finalization ...
ffs formatting...
flash: EC240200000000:2BEA0000000000
Finalization Done
file saved: c:\InfinityBox\MModule\backup_security\Alcatel-300X_JRD23_08A_PCB01_GPRS_MT6223P_S00.MAUI_08A_W08 _36_SP1_V34__system_log_51573261_F75461B5_20111215-151648.B0X.bin
Finished, time used: 3 min 16 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

raychevski 12-15-2011 15:35

Core version : 1.30 Rev : 1.1

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-588_12.0.089_prd.core.C00
PPM : RM-588_12.0.089_prd.rofs2.V05
PPM2 : RM-588_12.0.089_C02_prd.rofs3.fpsx
CNT : RM588_12.0.089_006_000_U001.uda.fpsx
Flashing phone now...
Check files done...
-> Check SW version...
FlashFile version : 12.0.089
Phone version : V 12.0.089
-> Check SW version : Reflash
Backup CRT308 data...
CRT308 Backup Created
SLx Simlock Data read ... ok
SL3 Simlock Sign read ... ok
WMDRM read ... ok
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\351514040867660_SI M_2nd.rpl

Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Gathering phone info...
Check communication with phone...
Reboot....
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101051103
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 1A300019808B0052527053DBC5CAAF92737CB2FA
ASIC MODE ID: 00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID: 4B9B75103E691FF8
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing RAP3NAND ...
Processing PASUBTOC ...
Processing PAPUBKEYS...
Processing UPDAPP ...
Boot Done! :)
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Auth done...
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing RM-588_12.0.089_prd.core.C00
Found 4 areas to erase
Erasing area 0x00040000 - 0x00082FFF, NAND, CMT
Result: 0000
Erasing area 0x00083400 - 0x003FFFFF, NAND, CMT
Result: 0000
Erasing area 0x00800000 - 0x00D5FFFF, NAND, CMT
Result: 0000
Erasing area 0x00D60000 - 0x09E5FFFF, NAND, CMT
Result: 0000
Erase partition 0x0A
Partition erase Ok
Partitioning : Ok [5]
TIME : Erase time : 00:00:00
Write : Processing RM-588_12.0.089_prd.core.C00
Total 403 [403/0/0] blocks to write, writing...
CMT : Writing Hash CERT [ADA]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [RAP3NAND]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [SOS*UPDAPP]
CMT : Writing Hash CERT [SOS*DSP0]
CMT : Writing Hash CERT [SOS*ISASW]
CMT : Writing Hash CERT [SOS+CORE]
CMT : Writing Hash CERT [SOS+ROFS1]
TIME : Write time : 00:00:28
MCU Write done
===Flashing [PPM]===
Erase : Processing RM-588_12.0.089_prd.rofs2.V05
Found 1 areas to erase
Erasing area 0x06AA0000 - 0x0915FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-588_12.0.089_prd.rofs2.V05
Total 111 [111/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS+ROFS2]
TIME : Write time : 00:00:08
PPM Write done
===Flashing [PPM2]===
Erase : Processing RM-588_12.0.089_C02_prd.rofs3.fpsx
Found 1 areas to erase
Erasing area 0x09160000 - 0x09E5FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-588_12.0.089_C02_prd.rofs3.fpsx
Total 29 [29/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS+ROFS3]
TIME : Write time : 00:00:02
PPM Write done
===Flashing [CNT]===
Erase : Processing RM588_12.0.089_006_000_U001.uda.fpsx
Found 1 areas to erase
Erasing area 0x09E60000 - 0x0F47FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM588_12.0.089_006_000_U001.uda.fpsx
Total 22 [22/0/0] blocks to write, writing...
TIME : Write time : 00:00:01
CNT Write done
=================
ADL : End flashing
ADL : Finalize...

Flashing done!
Total flash time : 00:00:42
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 5230
Software Info: V ICPR72_09w36.16 01-12-09 RM-588 (c) Nokia
IMEI: 351514040867660
Ape Version: V 12.0.089
Product code: 0598971
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Set phone to Normal mode...

AfterFlash operations done ;D
Done!

Elapsed: 00:01:16
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

kmaxmax 12-15-2011 19:49

N97 RM-553 dead phone recovered...!
 
Code:

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-553_30.2.004_prd.core.C00
PPM : RM-553_30.2.004_prd.rofs2.V49
PPM2 : RM-553_30.2.004_C01_prd.rofs3.fpsx
CNT : RM-553_30.2.004_uda_11_001.uda.fpsx
APE : RM555_APE_ONLY_ENO_09w40_v0.032.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:      000000010000022600010006400C192101051103
CPU ID :      RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID:        00000296
EM1 ID:        00000B22
PUBLIC ID:    08B0010ABC900052C4C65B06F644BEAE4546988E
ASIC MODE ID:  00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID:        4B9B75103E691FF8
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing RAP3NAND ...
Processing PASUBTOC ...
Processing PAPUBKEYS...
Processing UPDAPP ...
Boot Done! :)
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Auth done...
ADL : ASIC CMT select Ok
  ===Flashing [MCU]===
Erase : Processing RM-553_30.2.004_prd.core.C00
Found 4 areas to erase
Erasing area 0x00040000 - 0x00082FFF, NAND, CMT
Result: 0000
Erasing area 0x00083400 - 0x003FFFFF, NAND, CMT
Result: 0000
Erasing area 0x00800000 - 0x00D5FFFF, NAND, CMT
Result: 0000
Erasing area 0x00D60000 - 0x0D39FFFF, NAND, CMT
Result: 0000
Erase partition 0x0A
Partition erase Ok
Partitioning : Ok [5]
TIME : Erase time : 00:00:01
Write : Processing RM-553_30.2.004_prd.core.C00
Total 517 [517/0/0] blocks to write, writing...
CMT : Writing Hash CERT [ADA]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [RAP3NAND]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [SOS*UPDAPP]
CMT : Writing Hash CERT [SOS*DSP0]
CMT : Writing Hash CERT [SOS*ISASW]
CMT : Writing Hash CERT [SOS+CORE]
CMT : Writing Hash CERT [SOS+ROFS1]
TIME : Write time : 00:00:38
MCU Write done
  ===Flashing [PPM]===
Erase : Processing RM-553_30.2.004_prd.rofs2.V49
Found 1 areas to erase
Erasing area 0x094A0000 - 0x0C49FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-553_30.2.004_prd.rofs2.V49
Total 73 [73/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS+ROFS2]
TIME : Write time : 00:00:05
PPM Write done
  ===Flashing [PPM2]===
Erase : Processing RM-553_30.2.004_C01_prd.rofs3.fpsx
Found 1 areas to erase
Erasing area 0x0C4A0000 - 0x0D39FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-553_30.2.004_C01_prd.rofs3.fpsx
Total 7 [7/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS+ROFS3]
TIME : Write time : 00:00:00
PPM Write done
  ===Flashing [CNT]===
Erase : Processing RM-553_30.2.004_uda_11_001.uda.fpsx
Found 1 areas to erase
Erasing area 0x0D3A0000 - 0x1EF7FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-553_30.2.004_uda_11_001.uda.fpsx
Total 64 [64/0/0] blocks to write, writing...
TIME : Write time : 00:00:05
CNT Write done
  ===Flashing [APE]===
Erase : Processing RM555_APE_ONLY_ENO_09w40_v0.032.fpsx
Found 1 areas to erase
Erasing area 0x00400000 - 0x007FFFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM555_APE_ONLY_ENO_09w40_v0.032.fpsx
Total 17 [17/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS*ENO]
TIME : Write time : 00:00:00
APE Write done
 =================
ADL : End flashing
ADL : Finalize...

Flashing done!
Total flash time : 00:00:52
Reboot phone now...

Reading Phone Info....
Connected phone -  Nokia N97 mini
Software Info:    V ICPR72_11w18 09-05-11 RM-553 (c) Nokia
IMEI:  35798xxxxxxxxxxx
Ape Version: v 30.2.004
Product code:  0598970
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
AfterFlash operations done... Reconnect, wait...
Done!

Elapsed: 00:01:20
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

Backup Certificates now...
Backup CRT308 data...
CRT308 Backup Created
SLx Simlock Data read ... ok
SL3 Simlock Sign read ... ok
WMDRM read ... ok
Check communication with phone....
Reboot....
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:      000000010000022600010006400C192101051103
CPU ID :      RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID:        00000296
EM1 ID:        00000B22
PUBLIC ID:    08B0010ABC900052C4C65B06F644BEAE4546988E
ASIC MODE ID:  00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID:        4B9B75103E691FF8
Use URAPIDOv11_2nd.fg  ,  Rev : 2.0  Ver : 11.24.0
Processing RAWLOADER...
2nd boot not accepted... Alive Request not done :(
Boot error... :(

Looks like ASIC not supported, or HW failure
Supported : RapuYama, RAP3Gv4, BroadComm, RAPIDO
If RAPIDO - use dead mode for read rpl/force local

SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\35798xxxxxxxxxxx_SIM.rpl

Phone disconected!

Connect phone on selected interface...

Br
kmaxmax

carlos32 12-15-2011 21:22

hawey unlock wed sucess...no errors...perfect

Quote:

==== [15-12-2011 16:10:59] ====
COM7 [VCP0] selected
module v4.12
Device: Huawei-G6
Checking data, wait...
Action: read flash NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6253:8A02:8A00
status: FF
bbchip bl ver: FE
NOR flash id[00C0]: 0098:009E00000000 [TOSHIBA] TC58FYM7T8C
chip size: 16Mb
otp status/size: S_DA_NOR_OTP_EXIST/00020000
NAND flash chip: not installed
internal RAM size: 00020000
external RAM: absent
done
Set baudrate (115200)...
done
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 00000000/00000000
detect sec ro...
detect custom parameters...
detect project-id...
project-id: PTRC77B168SSC
detect NOR info...
number of areas/bytes to read: 1:00050000
reading (HW_STORAGE_NOR)...
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: HUAWEI53_09B_PCB01_GPRS_MT6253_S00.PTRC77B168SSC.B IN_FLNTY6701111184KC
project-id: PTRC77B168SSC, 00000000
code offset: 00000000
ffs offset/size [02]: 00D40000/002C0000
rom info structure: [standard] type (07)
TCL-ID is absent
===> done
area size: 16Mb
number of areas/bytes to read: 1:01000000
reading (HW_STORAGE_NOR)...
file saved: C:\Users\Desktop\InfinityBox\MModule\Huawei-G6_HUAWEI53_09B_PCB01_GPRS_MT6253_S00.PTRC77B168SS C.BIN_FLNTY6701111184KC__fullflash_20111215-163958.B0M.bin
Disconnect...
done
Finished, time used: 29 min 9 sec
Remove/Install battery now !

==== [15-12-2011 16:42:45] ====
COM7 [VCP0] selected
module v4.12
Model: Huawei-G6
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6253:8A02:8A00]...
CPU: MT6253
high speed boot On
chip: 0000:0000:000F
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6253,E02
Date: 2000.00.00
Version: 1.0
Version: PTRC77B168SSC
Version: VER.B
115 byte(s) read
imei: 35391604035286
Finished, time used: 22 sec
Remove/Install battery now !
Now click to "OK" button and press and HOLD phone "Power" button again !
interface: META_DLL_v6.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
done
Release Power button now !
Shutdown...
done
Finished, time used: 7 sec
Remove/Install battery now !
here´s backup file...https://rapidshare.com/files/6797245...163958.B0M.rar

atozdeepu 12-16-2011 09:14

hello sir pls tell me my crt cut but code failed how to back my crt in act

alhameed 12-16-2011 09:24

Quote:

Originally Posted by atozdeepu (Post 7988324)
hello sir pls tell me my crt cut but code failed how to back my crt in act

Bro post here with logs if u want help


All times are GMT +1. The time now is 12:26.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 1.17025 seconds with 6 queries

SEO by vBSEO