GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 01-12-2012, 15:29   #15166 (permalink)
Freak Poster
 
Bilal1984's Avatar
 
Join Date: Sep 2010
Location: searching
Age: 39
Posts: 215
Member: 1404229
Status: Offline
Sonork: 100.1612419
Thanks Meter: 44

COM3 [Serial2] selected
module v4.01
Action: "sp-unlock"
unlock method: smart fast
Model: ZTE-X760
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:5303:000A
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: X760_Z15UK_FS_BFFA110
Version: ZTEMT25_07A_HW_C
44 byte(s) read
imei: 35235302110699
connection Ok
157 byte(s) read
reading data...
building new data...
writing data...
145 byte(s) read
reading data...
972 byte(s) read
building new data...
writing data...
verifying...
verification Ok
done
Finished, time used: 10 sec
  Reply With Quote
Old 01-12-2012, 15:31   #15167 (permalink)
No Life Poster
 
naeem janjua's Avatar
 
Join Date: Jun 2005
Location: rawalpindi,pakistan.
Posts: 904
Member: 155992
Status: Offline
Sonork: 1585672
Thanks Meter: 171
g6620 unlock.

COM7 [VCP3] selected
module v3.91
Action: "sp-unlock"
unlock method: smart fast
Model: Huawei-G6620
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6253:8A02:8A00]...
CPU: MT6253
chip: 0000:0000:000F
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6253,E02
Date: 2000.00.00
Version: 1.0
Version: G6620SS.C210.M40.05.03N
Version: CKT53_12832_09B_HW
====================
New firmware found (v.3.91, database date: 16.05.2011):
G6620SS.C210.M40.05.03N

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare ? Secure Data Logistics or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
116 byte(s) read
imei: 86775100017700
connection Ok
217 byte(s) read
reading data...
reading data #2...
building new data...
writing data...
205 byte(s) read
reading data...
220 byte(s) read
building new data...
writing data...
verifying...
verification Ok
done
Finished, time used: 16 sec
Remove/Install battery now !
  Reply With Quote
Old 01-12-2012, 15:32   #15168 (permalink)
Freak Poster
 
Bilal1984's Avatar
 
Join Date: Sep 2010
Location: searching
Age: 39
Posts: 215
Member: 1404229
Status: Offline
Sonork: 100.1612419
Thanks Meter: 44
COM3 [Serial2] selected
module v4.01
Action: "sp-unlock"
unlock method: smart fast
Model: ZTE-R221_16mb
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A08]...
CPU: MT6223
high speed boot On
chip: 0011:4001:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E08
Date: 2000.00.00
Version: 1.0
Version: TMO_UK_P109A17V1.0.1B07
Version: ZTENJ23D_09A_HW
86 byte(s) read
imei: 86853300595296
connection Ok
192 byte(s) read
reading data...
reading data #2...
building new data...
writing data...
180 byte(s) read
reading data...
972 byte(s) read
building new data...
writing data...
verifying...
verification Ok
done
Finished, time used: 13 sec
  Reply With Quote
Old 01-12-2012, 15:33   #15169 (permalink)
Freak Poster
 
Bilal1984's Avatar
 
Join Date: Sep 2010
Location: searching
Age: 39
Posts: 215
Member: 1404229
Status: Offline
Sonork: 100.1612419
Thanks Meter: 44
COM3 [Serial2] selected
module v4.01
Device: Alcatel-355X, 355A
Checking data, wait...
advanced flash detection enabled
Action: rebuild security area
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
high speed boot On
chip: 0011:A5CB:A00C
status: 01
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 01227E22202200:2BEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
otp offset: 00000000
number of flash chip/regions detected: 01/01
Initialize Done
====> Set baud ...
230400
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: [protected] type (05), 1 record(s)
TCL-ID is present
startup code area #1 is Ok
startup code area #1 backup saved: c:\InfinityBox\MModule\backup_security\id.095F8391 .[JRD23_08A_PCB01_GPRS_MT6223P_S00.MAUI_08A_W08_36_S P1_V34.BIN_1FCF6C5F].rpl
rom info detection finished
TCL-ID detection...
TCL-ID detection done
device-id: 095F8391
rom info ver: 05
sw version: JRD23_08A_PCB01_GPRS_MT6223P_S00.MAUI_08A_W08_36_S P1_V34.BIN
project-id: MAUI.08A.W08.36.SP1.V34, 5F6CCF1F
code offset: 00000000
ffs offset/size [01]: 00C00000/00400000
TCL-ID identification
version: 46G
provider: 355X-2DRGGB1
customization: CI46CN81
customization: XI46CN81
TCL-ID identification done
rom info structure: [protected] type (05), 1 record(s)
TCL-ID is present
ffs/eeprom address assigned: 00C00000
startup code area #1 check...
startup code area #1 fixed
sec info (detailed) detection...
searching sec info#1...
search sec info#1 finished
sim-lock status: disabled
product id: JRD_COMMUNICATION_U91X_PRODUCTS
area1 is valid
area2 is valid
area3 is valid
area4 is valid
searching sec info#2...
.
search sec info#2 finished
security area (sec info, cust) calculation...
identification header detected
customization: XI46CN81
customization name adjusted
flash: 01227E22202200:2BEA0000000000
flash: 01227E22202200:2BEA0000000000
Write: security area (sec info, cust)
security area (sec info, cust) calculation done
security area (sec info, hash) calculation...
..................security area (sec info, hash) detecting size...
security area (sec info, hash) detecting parameters...
security area (sec info, hash) encoding...
done
flash: 01227E22202200:2BEA0000000000
flash: 01227E22202200:2BEA0000000000
Write: security area (sec info, hash)
security area (sec info, hash) calculation done
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
original imei: 35392304345992
flash: 01227E22202200:2BEA0000000000
Backup required data Done
====> Patch required data ...
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
Write Done
====> Finalization ...
ffs formatting...
flash: 01227E22202200:2BEA0000000000
Finalization Done
file saved: c:\InfinityBox\MModule\backup_security\Alcatel-355X,355A_JRD23_08A_PCB01_GPRS_MT6223P_S00.MAUI_08 A_W08_36_SP1_V34__system_log_095F8391_1FCF6C5F_201 11011-071901.B0X.bin
Finished, time used: 3 min 10 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !
  Reply With Quote
Old 01-12-2012, 15:35   #15170 (permalink)
Freak Poster
 
Bilal1984's Avatar
 
Join Date: Sep 2010
Location: searching
Age: 39
Posts: 215
Member: 1404229
Status: Offline
Sonork: 100.1612419
Thanks Meter: 44
odule v4.04
Action: "sp-unlock"
unlock method: smart fast
Model: MTS-547
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6235:8A04:8A01]...
CPU: MT6235
high speed boot On
chip: 0000:0000:0003
status: FF
rom: 4D573031
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6235,E04
Date: 2000.00.00
Version: 1.0
Version: VF_UK_EN_P107A4V1.2.0B03
Version: 09AZTENJ35_09A
83 byte(s) read
imei: 35962103111963
connection Ok
189 byte(s) read
reading data...
building new data...
writing data...
177 byte(s) read
reading data...
972 byte(s) read
building new data...
writing data...
verifying...
verification Ok
done
Finished, time used: 17 sec
Remove/Install battery now !
  Reply With Quote
Old 01-12-2012, 15:36   #15171 (permalink)
No Life Poster
 
naeem janjua's Avatar
 
Join Date: Jun 2005
Location: rawalpindi,pakistan.
Posts: 904
Member: 155992
Status: Offline
Sonork: 1585672
Thanks Meter: 171
Device: LG-KP110
Checking data, wait...
advanced flash detection enabled
Action: reset
Boot ...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting, wait...
Release Power button now !
flash: 01227E22212200:FEEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
id: 00005258
Boot Done
Set baud ...
115200
Set baud Done
Check flash ...
current eeprom imei: 35925602064*****
file saved: D:\Program Files\InfinityBox\LGA\eeprom_35925602064****_LG-KP110_20110403-150307.B1E.bin
....
reading _eeprom-ffs_359256020649112...
file saved: D:\Program Files\InfinityBox\LGA\_eeprom-ffs_3592560206****_LG-KP110_20110403-150721.B1E.bin
Check flash Done
Check space ...
Check space Done
Check parameters ...
Check parameters Done
Erase ...
Erase Done
Write ...
Write Done
Finished, time used: 300 sec
  Reply With Quote
Old 01-12-2012, 15:37   #15172 (permalink)
Freak Poster
 
Bilal1984's Avatar
 
Join Date: Sep 2010
Location: searching
Age: 39
Posts: 215
Member: 1404229
Status: Offline
Sonork: 100.1612419
Thanks Meter: 44
module v4.04
Action: "sp-unlock"
unlock method: smart fast
Model: ZTE-R221_16mb
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A05:8A00]...
CPU: MT6223
high speed boot On
chip: 0011:47D8:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E05
Date: 2000.00.00
Version: 1.0
Version: TMO_UK_P109A17V1.0.1B07
Version: ZTENJ23D_09A_HW
86 byte(s) read
imei: 35926403614754
connection Ok
192 byte(s) read
reading data...
reading data #2...
building new data...
writing data...
180 byte(s) read
reading data...
972 byte(s) read
building new data...
writing data...
verifying...
verification Ok
done
Finished, time used: 24 sec
  Reply With Quote
Old 01-12-2012, 15:37   #15173 (permalink)
No Life Poster
 
naeem janjua's Avatar
 
Join Date: Jun 2005
Location: rawalpindi,pakistan.
Posts: 904
Member: 155992
Status: Offline
Sonork: 1585672
Thanks Meter: 171
Device: LG-KG130
Checking data, wait...
advanced flash detection enabled
Action: reset
Boot ...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting, wait...
Release Power button now !
flash: 01227E22212200:FEEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
id: 00005258
Boot Done
Set baud ...
115200
Set baud Done
Check flash ...
current eeprom imei: 35531101****
current otp imei: 35531101***
file saved: D:\Program Files\InfinityBox\LGA\eeprom_35531101***_LG-KG130_20110411-212724.B1E.bin
.......
version: 208-20V10b33KG130P40FL
reading 208-20V10b33KG130P40FL_eeprom-ffs_355311010696**...
file saved: D:\Program Files\InfinityBox\LGA\208-20V10b33KG130P40FL_eeprom-ffs_3553110106*****_LG-KG130_20110411-213141.B1E.bin
Check flash Done
Check space ...
Check space Done
Check parameters ...
Check parameters Done
Erase ...
Erase Done
Write ...
Write Done
Finished, time used: 312 sec
Remove/Install battery now !
  Reply With Quote
Old 01-12-2012, 15:38   #15174 (permalink)
No Life Poster
 
naeem janjua's Avatar
 
Join Date: Jun 2005
Location: rawalpindi,pakistan.
Posts: 904
Member: 155992
Status: Offline
Sonork: 1585672
Thanks Meter: 171
zte n281 unlock

COM7 [VCP7] selected
module v3.91
Action: read unlock codes
unlock method: read codes
Model: ZTE-N281
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6235:8A04:8A01]...
CPU: MT6235
chip: 0000:0000:0003
status: FF
rom: 4D573031
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6235,E04
Date: 2000.00.00
Version: 1.0
Version: TMO_UK_P107A3V1.0.1B10
Version: 09AZTENJ35_09A
83 byte(s) read
imei: 35769203787553
connection Ok
189 byte(s) read
38 byte(s) read
Phone lock: Off
Phone code: 0000
177 byte(s) read
reading data...
972 byte(s) read
lock[1] code: + 491578789632
lock[2] code: + default
lock[3] code: + 1122
lock[4] code: - default
lock[5] code: - default
lock[6] code: + default
lock[7] code: + default
if phone do not ask for a code try: *983*8284#
if code is not accepted by phone:
- make full flash backup for emergency case
- flash phone with good eeprom file
- Power-On phone without sim-card
- Power-Off phone (do not remove battery)
- read unlock codes
- restore original imei
Finished, time used: 20 sec
Remove/Install battery now !
  Reply With Quote
Old 01-12-2012, 15:38   #15175 (permalink)
Freak Poster
 
Bilal1984's Avatar
 
Join Date: Sep 2010
Location: searching
Age: 39
Posts: 215
Member: 1404229
Status: Offline
Sonork: 100.1612419
Thanks Meter: 44
Loading data, wait...
[Infinity Box] MModule v4.04
smart-card: connected
S/N: 153E:0116
Wait...
trying to select model: /G-R221
Device: _Autodetect MT6205-6239 NOR
Initialization done
Device: ZTE-R221_16mb

==== [10/28/2011 3:22:01 AM] ====
COM8 [VCP0] selected
module v4.04
Device: ZTE-R221_16mb
Checking data, wait...
advanced flash detection enabled
Action: "sp-unlock"
unlock method: standard fast
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A08]...
CPU: MT6223
high speed boot On
chip: 0011:72EE:000C
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 208848FFFFFFFF:20884800000000
flash: ST Intel std [def 007Fx010000 0008x002000] 8Mb
otp offset: 007F0000
detecting chip #01 in region #00...
flash: 208848FFFFFFFF:20884800000000
flash: ST Intel std [def 007Fx010000 0008x002000] 8Mb
otp offset: 007F0000
number of flash chip/regions detected: 02/01
Initialize Done
====> Set baud ...
921600
Set baud Done
====> Initialize bootcode ...
interesting cpu type found
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: [standard] type (07)
TCL-ID is absent
====================
New firmware found (v.4.04, database date: 17.10.2011):
ZTENJ23D_09A_PCB01_GPRS_MT6223_S00.TMO_UK_P109A17V 1_0_1B09.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare ? Secure Data Logistics or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
rom info detection finished
rom info ver: 07
sw version: ZTENJ23D_09A_PCB01_GPRS_MT6223_S00.TMO_UK_P109A17V 1_0_1B09.BIN
project-id: TMO_UK_P109A17V1.0.1B09, 00000000
code offset: 00000000
ffs offset/size [02]: 00600000/00200000
rom info structure: [standard] type (07)
TCL-ID is absent
ffs/eeprom address assigned: 00600000
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
flash: 208848FFFFFFFF:20884800000000
Backup required data Done
====> Patch required data ...
...................
lock area found
...................
lock area found
Patch required data Done
====> Special operation ...
detecting parameters to apply patch area 1...
.................................................. ..............
error: area 1 can not apply patch
detecting parameters to apply patch area 2...
.................................................. ..............
error: area 2 can not apply patch
Special operation Done
====> Write ...
flash: 208848FFFFFFFF:20884800000000
flash: 208848FFFFFFFF:20884800000000
Write: lock-area-1
flash: 208848FFFFFFFF:20884800000000
flash: 208848FFFFFFFF:20884800000000
Write: lock-area-4
Write Done
====> Finalization ...
Finalization Done
Finished, time used: 1 min 14 sec
  Reply With Quote
Old 01-12-2012, 15:38   #15176 (permalink)
No Life Poster
 
net.tarik's Avatar
 
Join Date: Jun 2010
Location: Green Forest
Posts: 1,125
Member: 1316000
Status: Offline
Sonork: 100.1624093
Thanks Meter: 348
COM3 [VCP0] selected
module v4.13
Device: _Autodetect MT6228-6268 NAND
Checking data, wait...
Action: read firmware NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0005]: 00EC:0079005A003F [SAMSUNG] K9K1G08X0A
chip size: 128Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: absent
done
Set baudrate (921600)...
done
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 02500000/05B00000
firmware size: 37Mb
ffs size: 91Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: E600_AB_V1.6
detect NAND info...
number of areas/bytes to read: 1:00034000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: E600_AB_BOOTLOADER_V005_MT6235B_E600_AB_V1_6.bin
nfi area detection (3 cores) finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
number of areas/bytes to read: 1:00004000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
number of areas/bytes to read: 1:00004000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
startup code area #1 is valid
startup code area #1 detection done
rom info ver: 07
sw version: E600_AB_PCB01_GPRS_MT6235B_S01.E600_AB_V1_6.BIN
project-id: E600_AB_V1.6, A53F39E8
code offset: 00000000
ffs offset/size [01]: 02500000/05B00000
rom info structure: [protected] type (07), 1 record(s)
TCL-ID is absent
===> done
====================
New firmware found (v.4.13, database date: 22.12.2011):
E600_AB_PCB01_GPRS_MT6235B_S01.E600_AB_V1_6.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare ? Secure Data Logistics or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
area size: 37Mb
number of areas/bytes to read: 1:02500000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
file saved: C:\Documents and Settings\Administrator\Desktop\E600_AB_PCB01_GPRS_ MT6235B_S01.E600_AB_V1_6__firmware_20120101-192229.B4M.bin
Disconnect...
done
file saved: C:\InfinityBox\MModule\backup_security\E600_AB_PCB 01_GPRS_MT6235B_S01.E600_AB_V1_6__system_log_20120 101-192310.B4X.bin
Finished, time used: 15 min 16 sec
Remove/Install battery now !
  Reply With Quote
Old 01-12-2012, 15:39   #15177 (permalink)
No Life Poster
 
net.tarik's Avatar
 
Join Date: Jun 2010
Location: Green Forest
Posts: 1,125
Member: 1316000
Status: Offline
Sonork: 100.1624093
Thanks Meter: 348
COM5 [VCP0] selected
module v4.13
Action: "repair imei"
imei write method: mode-2
imei write channel: imei #1 for dual sim/mono CPU
new imei: 352237027456666
Model: _Autodetect MT6205-6239 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001A03:0008
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E05
Date: 2006.06.14
Version: 1.0
Version: R202_GH_S202_F12_V02_090730
Version: RONCENT25_GEMINI_08B_HW
detecting structure #2...
1 2 3 5warning: wrong packet cs
7 8 9 11 13 done
80 byte(s) read
imei: FFFFFFFFFFFFFF
connection Ok
detecting structure #2...
1 2 3 5 7 8 9 11 13 done
80 byte(s) read
verification...
verification done: 35223702745666
Finished, time used: 11 sec
Remove/Install battery now !
  Reply With Quote
Old 01-12-2012, 15:40   #15178 (permalink)
No Life Poster
 
net.tarik's Avatar
 
Join Date: Jun 2010
Location: Green Forest
Posts: 1,125
Member: 1316000
Status: Offline
Sonork: 100.1624093
Thanks Meter: 348
COM3 [VCP0] selected
module v4.13
Device: _Autodetect MT6228-6268 NAND
Checking data, wait...
Action: read firmware NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0017]: 00AD:007600AD0076 [HYNIX] HY27XS08121M
chip size: 64Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: absent
done
Set baudrate (921600)...
done
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 01800000/02800000
firmware size: 24Mb
ffs size: 40Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: GP_P107A1V1.0.0B06
detect NAND info...
number of areas/bytes to read: 1:00034000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
external bootloader is not present
bootloader version: ZTENJ35_OG_08B_BOOTLOADER_V005_MT6235B_ORANGE_ENG_ EN_P107A1V1_0_
nfi area detection (3 cores) finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 05
sw version: ZTENJ35_OG_08B_PCB01_GPRS_MT6235B_S01.GP_P107A1V1_ 0_0B06.BIN
project-id: GP_P107A1V1.0.0B06, 00000000
code offset: 00000000
ffs offset/size [01]: 01800000/02800000
rom info structure: [standard] type (05)
TCL-ID is absent
===> done
====================
New firmware found (v.4.07, database date: 09.11.2011):
ZTENJ35_OG_08B_PCB01_GPRS_MT6235B_S01.GP_P107A1V1_ 0_0B06.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare ? Secure Data Logistics or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
area size: 24Mb
number of areas/bytes to read: 1:01800000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
file saved: C:\Documents and Settings\Administrator\Desktop\ZTENJ35_OG_08B_PCB0 1_GPRS_MT6235B_S01.GP_P107A1V1_0_0B06__firmware_20 111115-173812.B4M.bin
Disconnect...
done
Finished, time used: 9 min 56 sec
Remove/Install battery now !
  Reply With Quote
Old 01-12-2012, 15:40   #15179 (permalink)
No Life Poster
 
net.tarik's Avatar
 
Join Date: Jun 2010
Location: Green Forest
Posts: 1,125
Member: 1316000
Status: Offline
Sonork: 100.1624093
Thanks Meter: 348
COM3 [VCP0] selected
module v4.13
Action: touchscreen calibration
How to calibrate touchscreen:
- for this operation you need to have full flash backup from phone
- if you have full flash backup already press "Yes", select full flash file and follow instructions given by software
- if you do not have full flash backup yet press "No", read full flash and repeat calibration procedure

Do you have full flash backup ?
Loading file v.02...
S558CV01.02B11.FOR.TV__fullflash_20111122-173738.B0M.bin loaded
ffs/eeprom record offset detected
ffs/eeprom record size detected
ffs/eeprom record offset detected
ffs/eeprom record size detected
Model: _Autodetect MT6205-6239 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:8903:000F
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E05
Date: 2006.06.14
Version: 1.0
Version: S558Cv01.02b11.FOR.TV
Version: S558_13_4BTMVR_V1.02
====================
New firmware found (v.4.09, database date: 18.11.2011):
S558Cv01.02b11.FOR.TV

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare ? Secure Data Logistics or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
67 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
512 byte(s) read
220 byte(s) read
reading data #2...
512 byte(s) read
calibration value: 0
writing data...
verification...
verification Ok
Finished, time used: 30 sec
Remove/Install battery now !
  Reply With Quote
The Following User Says Thank You to net.tarik For This Useful Post:
Old 01-12-2012, 17:46   #15180 (permalink)
Freak Poster
 
bmx21's Avatar
 
Join Date: Sep 2008
Location: ****======dz=moslem****
Posts: 354
Member: 862673
Status: Offline
Sonork: dz
Thanks Meter: 166
zte x630 unlock done
using the x632

COM1 [VCP1] selected
module v4.13
Action: "sp-unlock"
unlock method: smart fast
Model: ZTE-X632
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A08]...
CPU: MT6223
high speed boot On
chip: 0011:5C55:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E08
Date: 2000.00.00
Version: 1.0
Version: Z525.C136.HW1.SW17.V1.10
Version: YUANDA23C_09A_HW
====================
New firmware found (v.4.13, database date: 22.12.2011):
Z525.C136.HW1.SW17.V1.10

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare ? Secure Data Logistics or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
86 byte(s) read
imei: 353578*******
connection Ok
193 byte(s) read
reading data...
reading data #2...
building new data...
writing data...
181 byte(s) read
reading data...
188 byte(s) read
building new data...
writing data...
verifying...
verification Ok
done
Finished, time used: 16 sec
Remove/Install battery now !
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 17:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 11:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 09:03
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 20:17

 



All times are GMT +1. The time now is 13:50.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.42707 seconds with 10 queries

SEO by vBSEO