GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box
Reload this Page Successfully unlocked/repaired phones by Infinity-Box
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source


Reply
Page 3626 of 5073 « First 26263126352635763616362336243625 3626 36273628362936363676372641264626 Last »
 
LinkBack Thread Tools Display Modes
Old 11-08-2018, 15:08   #54376 (permalink)
No Life Poster
 
Kirumira's Avatar
 
Join Date: Dec 2004
Location: Uganda
Age: 45
Posts: 2,919
Member: 96478
Status: Offline
Sonork: 100.1674604
Thanks Meter: 1,420
XBO MTK6580 Read FIRMWARE & NV DONE MT2

Code:
Operation : Identify [ v2.01 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM5)
MODE : PRELOADER PORT
PORT : 5
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
NAND : DEVICE NOT FOUND
eMMC : OK
eMMC : 300001113947343010D9513019C18961
DAInf: 4 : 2 : 156
     DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

        EMMC: 11010030303447393051D9106189C119
        EMMC: VEN : TOSHIBA | OEM : 01 | DEV : 004G90
        EMMC: 
              BOOT1  : 0x00200000 [ 2.00 MB ]
              BOOT2  : 0x00200000 [ 2.00 MB ]
              RPMB   : 0x00080000 [ 512.00 KB ]
              USER   : 0xEC000000 [ 3.69 GB ]

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x20000000 [ 512.00 MB ]

        CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 6006AEDE96E2C7331F2BB0072231F550

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : LMY47I
Display ID     : U925QA_V043En
Ver. CodeName  : REL
Ver. Release   : 5.1
Sec. Patch     : 2016-03-01
Build Time     : 1490346148
Product Model  : gxq6580_weg_l
Product Brand  : alps
Product Name   : full_gxq6580_weg_l
Product Device : gxq6580_weg_l
Product Manfct : alps
Board Platform : mt6580
Product Info   : gxq6580_weg_l

USERDATA : PLAIN ( NOT encrypted )

IMEI[0] : 35XXXXXXXXXXX
IMEI[1] : 35XXXXXXXXXXX
NVRAM check : Passed!

Done!
Elapsed: 00:00:31
Code:
Operation : Read Firmware [ v2.01 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM5)
MODE : PRELOADER PORT
PORT : 5
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
NAND : DEVICE NOT FOUND
eMMC : OK
eMMC : 300001113947343010D9513019C18961
DAInf: 4 : 2 : 156
     DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

        EMMC: 11010030303447393051D9106189C119
        EMMC: VEN : TOSHIBA | OEM : 01 | DEV : 004G90
        EMMC: 
              BOOT1  : 0x00200000 [ 2.00 MB ]
              BOOT2  : 0x00200000 [ 2.00 MB ]
              RPMB   : 0x00080000 [ 512.00 KB ]
              USER   : 0xEC000000 [ 3.69 GB ]

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x20000000 [ 512.00 MB ]

        CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 6006AEDE96E2C7331F2BB0072231F550

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : LMY47I
Display ID     : U925QA_V043En
Ver. CodeName  : REL
Ver. Release   : 5.1
Sec. Patch     : 2016-03-01
Build Time     : 1490346148
Product Model  : gxq6580_weg_l
Product Brand  : alps
Product Name   : full_gxq6580_weg_l
Product Device : gxq6580_weg_l
Product Manfct : alps
Board Platform : mt6580
Product Info   : gxq6580_weg_l

MT6580__alps__gxq6580_weg_l__5.1__U925QA_V043En__LMY47I__gxq6580_weg_l

Read : preloader.bin
Read : proinfo.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 20%
Read : cache.img
Read : userdata.img

FW Size  : 1.00 GB
Android Info saved : _Android_info.txt
Scatter  : MT6580_Android_scatter.txt
Saved to : C:\Users\rival\Desktop\MT6580__alps__gxq6580_weg_l__5.1__U925QA_V043En__LMY47I__gxq6580_weg_l\

Done!
Elapsed: 00:06:01
Code:
Operation : Read Security [ v2.01 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM5)
MODE : PRELOADER PORT
PORT : 5
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
NAND : DEVICE NOT FOUND
eMMC : OK
eMMC : 300001113947343010D9513019C18961
DAInf: 4 : 2 : 156
     DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

        EMMC: 11010030303447393051D9106189C119
        EMMC: VEN : TOSHIBA | OEM : 01 | DEV : 004G90
        EMMC: 
              BOOT1  : 0x00200000 [ 2.00 MB ]
              BOOT2  : 0x00200000 [ 2.00 MB ]
              RPMB   : 0x00080000 [ 512.00 KB ]
              USER   : 0xEC000000 [ 3.69 GB ]

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x20000000 [ 512.00 MB ]

        CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 6006AEDE96E2C7331F2BB0072231F550

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

SEC Data : 
IMEI[0] : 35xxxxxxxxxxxxx6
IMEI[1] : 35xxxxxxxxxxxxx4

NVRAM check : Passed!

NVM saved as : MT6580__eMMC__358463052953286.mt_sec
NVM saved to : C:\Users\rival\Desktop\MT6580__alps__gxq6580_weg_l__5.1__U925QA_V043En__LMY47I__gxq6580_weg_l\

Done!
Elapsed: 00:00:32

Reconnect Power/Cable!
  Reply With Quote
Old 11-08-2018, 15:09   #54377 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,789
Member: 2644066
Status: Offline
Thanks Meter: 1,773
Qmobile d3 illegul use error done by cm2
Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 15 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00EF 0040 0016 0000
[0] Flash VEN : Winbond , W25Q32
[0] Flash CAP : 00400000
Verify data... Can take some time
Init Ok, formatting DIN area ...
Format Block Done!
Done!

Elapsed: 00:00:10

Reconnect Power/Cable!
  Reply With Quote
Old 11-08-2018, 15:10   #54378 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,789
Member: 2644066
Status: Offline
Thanks Meter: 1,773
Qmobile m95 spd 7731 blue display done by cm2
Infinity SC Firmware Detected
FW Size : 1239 MiB
Load Ok!

Operation : Flash [ v1.27 ]

======= Flash
Files set for flashing :
[ MCU ] : SC77xx Infinity Package

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 11 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!

[FL] : Enabled NVM update. Will program all NVM images found in FW !


PMTManager : Load 0x17 records
PMTManager : PMT Update Ok!
Flashing now

Update BootCode : u-boot-spl-16k.bin
Write Data ...
Write Data Ok!

Update BootCode : u-boot.bin
Erase block ...
Block erase Ok!
Write Data ...
Write Data Ok!

Write FSImage : prodnv.img
Write Data ...
Write Data Ok!

Update NVM image : nvitem.bin
Update NVM Data Ok!

Erase Block : RuntimeData
Erase block ...
Block erase Ok!

Erase Block : RuntimeData
Erase block ...
Block erase Ok!

Update NVM image : nvitem_wcn.bin
Update NVM Data Ok!

Erase Block : RuntimeData
Erase block ...
Block erase Ok!

Erase Block : RuntimeData
Erase block ...
Block erase Ok!

Write CodeData : sc7731g_CP0_modem.bin
Write Data ...
Write Data Ok!

Write CodeData : DSP_DM_Gx.bin
Write Data ...
Write Data Ok!

Write CodeData : sc8830g_modem_CP2_WCN_14D_W15.16_Release.bin
Write Data ...
Write Data Ok!

Write CodeData : logo_540x960.bin
Write Data ...
Write Data Ok!

Write CodeData : fblogo_540x960.bin
Write Data ...
Write Data Ok!

Write CodeData : boot.img
Write Data ...
Write Data Ok!

Write FSImage : system.img
Write Data ...
Write Data Ok!

Write FSImage : cache.img
Write Data ...
FSImage : Make and Flush SPImage
Write Data Ok!

Write CodeData : recovery.img
Write Data ...
Write Data Ok!

Process : Flush
Flush Ok!

Write FSImage : userdata.img
Write Data ...
FSImage : Make and Flush SPImage
Write Data Ok!


Elapsed: 00:03:44

Reconnect Power/Cable!
  Reply With Quote
Old 11-08-2018, 19:46   #54379 (permalink)
Freak Poster
 
Join Date: Oct 2007
Location: colombia
Posts: 311
Member: 603138
Status: Offline
Thanks Meter: 100
Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.16


Operation : Reset Settings [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 12D9D99C
ID_BLOCK_L : 29DBB14DE876636E590EC6CF0853E3EB
ID_BLOCK_L : B0C34DDCD140EA7B9E5932EBF9342229
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Repair block Ok!
Repair block Ok!
Repair block Ok!
Forced Fix Ok!

Done!
Elapsed: 00:00:31

Reconnect Power/Cable!
  Reply With Quote
Old 11-09-2018, 06:23   #54380 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Sindh Pakistan
Posts: 8,873
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 15,424
Smile Qmobile X20 Read Pattern Lock Done
Operation : Read Pattern/DP Lock [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 437 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 700100533130303034083480847F52F9
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 40001
[eMMC] : FLASH_CID : 700100533130303034083480847F52F9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E4000000
[eMMC] : FLASH_UCP : 3648 MiB [eMMC 4 GiB]
DEV RID : 0xE6C52A7D8EA9BCC451B13201F9CE7789
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading data ...

Get Locks ...
PatternLock Sequnce : 7415963

Done!
Elapsed: 00:00:28
Reconnect Power/Cable!
  Reply With Quote
Old 11-09-2018, 07:14   #54381 (permalink)
No Life Poster
 
surajnad's Avatar
 
Join Date: Feb 2007
Location: Sri lanka
Age: 43
Posts: 662
Member: 454011
Status: Offline
Sonork: 1656095
Thanks Meter: 147
Donate money to this user
optus x spirit sp unlock Done
Card found : S/N : xxxxxx , v0136
Chinese Miracle II [MTK module] v 1.58

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 13 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 460001154D32364EC25B034287DE799B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM26N
[eMMC] : FLASH_CID : 150100464E36324D42035BC29B794587
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x6AC8928A3333C6D0C48BAA3F32257266
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : TCL
ProdName : 5044T
ProdModel : 5044T
Device : BUZZ6T4G
AndroidVer: 6.0
MTKxCPU : MT6737M
MTKxPRJ : alps-mp-m0.mp1-V2.55.6_jhz6737m.35.b.m0_P126

Done!
Elapsed: 00:00:08
Reconnect Power/Cable!


Operation : SP Unlock [ v1.58 ]
Mode : Direct Unlock

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 13 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 460001154D32364EC25B034287DE799B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM26N
[eMMC] : FLASH_CID : 150100464E36324D42035BC29B794587
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x6AC8928A3333C6D0C48BAA3F32257266
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


SIM Lock Status : Locked!
Unlocking now ...
Unlock done!

Done!
Elapsed: 00:00:39
Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to surajnad For This Useful Post:
Old 11-09-2018, 07:48   #54382 (permalink)
No Life Poster
 
localizator's Avatar
 
Join Date: Mar 2016
Location: Ukraine
Posts: 1,024
Member: 2550141
Status: Offline
Thanks Meter: 1,115
Donate money to this user
HUAWEI CUN-U29 Read Info Done [CM2MT2 v2.02]
HUAWEI CUN-U29 Read Info Done [CM2MT2 v2.02]



Code:
Operation : Identify [ v2.02 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM18)
MODE : PRELOADER PORT
PORT : 18
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6582 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
     TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : Huawei : CUN-U29 | Manual : Enabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : DA_SWSEC.bin
AGENT : Found MT6582
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
NAND : DEVICE NOT FOUND
eMMC : OK
eMMC : 460001154D32584E0D3706424FB32EDE
DAInf: 4 : 2 : 135
     DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

        EMMC: 150100464E58324D4206370DDE2EB34F
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FNX2MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00080000 [ 512,00 KB ]
              USER   : 0x1D2000000 [ 7,28 GB ]

        SRAM: 0x00020000 [ 128,00 KB ]
        DRAM: 0x40000000 [ 1,00 GB ]

        CHIP : MT6582 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001 , EVOL : 0x0000

        RNID : 42E5B63E487E298DC2823B851A45EF17

 STATUS : DA : NOR OTP GETSIZE FAIL
 BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : HUAWEICUN-U29
Display ID     : CUN-U29C479B125
Ver. CodeName  : REL
Ver. Release   : 5.1
Sec. Patch     : 2016-10-05
Build Time     : 1479648229
Product Model  : HUAWEI CUN-U29
Product Brand  : HUAWEI
Product Name   : CUN-U29
Product Device : HUAWEI-U6582
Product Board  : CUN-U29
Product Manfct : HUAWEI
Board Platform : mt6582
Product Info   : hq6582_we_b1b_l1

USERDATA : PLAIN ( NOT encrypted )


Done!
Elapsed: 00:00:14
DA Agent: CUN-U29.7z
Code:
Archive: 
DA_SWSEC.bin
preloader_hq6582_we_b1b_l1.bin
MT6582_Android_scatter.txt
Last edited by localizator; 11-09-2018 at 07:53.
  Reply With Quote
The Following 3 Users Say Thank You to localizator For This Useful Post:
Show/Hide list of the thanked
Old 11-09-2018, 08:51   #54383 (permalink)
Insane Poster
 
Join Date: Feb 2016
Location: multan pakistan
Age: 42
Posts: 84
Member: 2536582
Status: Offline
Thanks Meter: 34
Cm2 ast moto droid max factory reset done
Card found : BAFB6697 , v0136
Infinity-Box Android Service Tool [AST] v1.03

Operation : Reset Settings [ v1.03 ]
Mode : Format FS

Waiting for device in fastboot mode ...

1. Power off device. Press and hold 'VOL DOWN' button
2. Insert USB cable, hold button until device will be found!

Connect Ok!

Block [1] ERASE FAIL!
Block [2] ERASE OK!

Done!
Elapsed: 00:00:34
  Reply With Quote
Old 11-09-2018, 09:31   #54384 (permalink)
No Life Poster
 
localizator's Avatar
 
Join Date: Mar 2016
Location: Ukraine
Posts: 1,024
Member: 2550141
Status: Offline
Thanks Meter: 1,115
Donate money to this user
myPhone MAGNUS Read Info and Read/Write Firmware [CM2MT2 ver.2.02]
myPhone MAGNUS Read Info and Read/Write Firmware [CM2MT2 ver.2.02]

Identify

Code:
Operation : Identify [ v2.02 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM18)
MODE : PRELOADER PORT
PORT : 18
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6753 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6753
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
NAND : DEVICE NOT FOUND
eMMC : OK
eMMC : 150100513832334D4200C54EDCA92A13
DAInf: 4 : 2 : 155
     DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

        EMMC: 150100513832334D4200C54EDCA98313
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : Q823MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0x3A3E00000 [ 14,56 GB ]

        SRAM: 0x00020000 [ 128,00 KB ]
        DRAM: 0x80000000 [ 2,00 GB ]

        CHIP : MT6753 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 325CED0AFE01E54E7DE374785296E776

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : MRA58K
Display ID     : MYPHONE_MAGNUS_V005_20161025
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2016-09-05
Build Time     : 1477342525
Product Model  : MAGNUS
Product Brand  : myPhone
Product Name   : MAGNUS_JMP
Product Device : MAGNUS_JMP
Product Board  : x5602_ym_s55138_myphone_5365u
Product Manfct : myPhone
Board Platform : mt6753
Product Info   : MAGNUS_JMP

USERDATA : ENCRYPTED 


Done!
Elapsed: 00:00:19
Read Firmware

Code:
Operation : Read Firmware [ v2.02 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM162)
MODE : PRELOADER PORT
PORT : 162
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6753 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6753
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
NAND : DEVICE NOT FOUND
eMMC : OK
eMMC : 150100513832334D4200C54EDCA92A13
DAInf: 4 : 2 : 155
     DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

        EMMC: 150100513832334D4200C54EDCA98313
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : Q823MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0x3A3E00000 [ 14,56 GB ]

        SRAM: 0x00020000 [ 128,00 KB ]
        DRAM: 0x80000000 [ 2,00 GB ]

        CHIP : MT6753 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 325CED0AFE01E54E7DE374785296E776

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : MRA58K
Display ID     : MYPHONE_MAGNUS_V005_20161025
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2016-09-05
Build Time     : 1477342525
Product Model  : MAGNUS
Product Brand  : myPhone
Product Name   : MAGNUS_JMP
Product Device : MAGNUS_JMP
Product Board  : x5602_ym_s55138_myphone_5365u
Product Manfct : myPhone
Board Platform : mt6753
Product Info   : MAGNUS_JMP

MT6753__myPhone__MAGNUS__6.0__MYPHONE_MAGNUS_V005_20161025__MRA58K__MAGNUS_JMP

Read : preloader.bin
Read : proinfo.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : secro.img
Read : tz.img
Read : system.img
ExtSparse : Compression ratio : 11%
Read : cache.img
Read : userdata.img

FW Size  : 3,29 GB
Android Info saved : _Android_info.txt
Scatter  : MT6753_Android_scatter.txt
Saved to : D:\dump\MT6753__myPhone__MAGNUS__6.0__MYPHONE_MAGNUS_V005_20161025__MRA58K__MAGNUS_JMP\

Done!
Elapsed: 00:09:44
Write Firmware

Code:
Created by Infinity-Box (c) 2018
Chinese Miracle II : MediaTek Service Module
Device Info file   : _Android_info.txt

Patch Level    : MRA58K
Display ID     : MYPHONE_MAGNUS_V005_20161025
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2016-09-05
Build Time     : 1477342525
Product Model  : MAGNUS
Product Brand  : myPhone
Product Name   : MAGNUS_JMP
Product Device : MAGNUS_JMP
Product Board  : x5602_ym_s55138_myphone_5365u
Product Manfct : myPhone
Board Platform : mt6753
Product Info   : MAGNUS_JMP

Preloader [HW DEV] Info : 
 EMI : DEV : MT6752
 EMI : SRC : preloader_x5602_ym_s55138_myphone_5365u.bin
 EMI : CNT : 0008
 EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 150100513832334D42 : VEN : SAMSUNG   | DEV : Q823MB : RAM : [ 2,00 GB ]
 EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 150100523832314D42 : VEN : SAMSUNG   | DEV : R821MB : RAM : [ 2,00 GB ]
 EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100523231424D42 : VEN : SAMSUNG   | DEV : R21BMB : RAM : [ 3,00 GB ]
 EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100525831424D42 : VEN : SAMSUNG   | DEV : RX1BMB : RAM : [ 3,00 GB ]
 EMI : [04] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 3,00 GB ]
 EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524531424D42 : VEN : SAMSUNG   | DEV : RE1BMB : RAM : [ 3,00 GB ]
 EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100523331424142 : VEN : SAMSUNG   | DEV : R31BAB : RAM : [ 3,00 GB ]
 EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 90014A484147326505 : VEN : HYNIX     | DEV : HAG2e : RAM : [ 3,00 GB ]

Operation : Write Flash [ v2.02 ]

Repartition   : Enabled
Flash Verify  : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW  : Enabled
SData Backup  : Disabled
Safe UserData : Disabled

Files :11
[FL] : Set : preloader_x5602_ym_s55138_myphone_5365u.bin
[FL] : Set : lk.bin
[FL] : Set : boot.img
[FL] : Set : recovery.img
[FL] : Set : logo.bin
[FL] : Set : secro.img
[FL] : Set : tz.img
[FL] : Set : tz.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0xD26D2184 [ 3,29 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM162)
MODE : PRELOADER PORT
PORT : 162
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6753 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6753
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
NAND : DEVICE NOT FOUND
eMMC : OK
eMMC : 150100513832334D4200C54EDCA92A13
DAInf: 4 : 2 : 155
     DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

        EMMC: 150100513832334D4200C54EDCA98313
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : Q823MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0x3A3E00000 [ 14,56 GB ]

        SRAM: 0x00020000 [ 128,00 KB ]
        DRAM: 0x80000000 [ 2,00 GB ]

        CHIP : MT6753 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 325CED0AFE01E54E7DE374785296E776

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

[FL] : HW verification passed!

SEC_DL : False (CUST)
SEC_ID : 0x35464646304237304435444533464335

[FL] : Pre-Erase 
Erase : 0x0000000000000000 : 0x0000000000080000
Erase : 0x0000000001C80000 : 0x00000003A1100000

[FL] : RePartition 
[FL] : RePartition Ok!

[FL] : Flashing now ... 

Write : PRELOADER
Update bootloader code ... 
Update bootloader Ok!
Write : LK
Write : BOOT
Write : RECOVERY
Write : LOGO
Write : SECRO
Write : TEE1
Write : TEE2
Write : SYSTEM
Write : CACHE
Write : USERDATA

[FL] : RePartition 
[FL] : RePartition Ok!

[FL] : Flashing finished!

Done!
Elapsed: 00:10:10
  Reply With Quote
The Following 2 Users Say Thank You to localizator For This Useful Post:
Old 11-09-2018, 10:11   #54385 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 2,079
Member: 118520
Status: Offline
Thanks Meter: 3,551
Smile SAMSUNG GT-N8000 BRUSH HANG ON LOGO Done
SUCCESSFULLY BRUSH HANG ON LOGO(SAMSUNG GT-N8000)USB


N8000XXUDNE5_OLBDNE3_2
Phone found on COM20
Phone In Download mode...
Port open Ok!
LOKE received!
Prepare Ok!
Enter Setup...
Setup Done!
Try download PIT...
Download PIT Ok!
Start flashing!

Flashing sboot.bin
Flashing param.bin
Flashing tz.img
Flashing boot.img
Flashing recovery.img
Flashing system.img
Flashing modem.bin
Flashing done

Reboot phone...

Phone Disconnected


THANKS INFINITY-BOX TEAM
  Reply With Quote
The Following User Says Thank You to gracy_elec For This Useful Post:
Old 11-09-2018, 10:20   #54386 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 2,079
Member: 118520
Status: Offline
Thanks Meter: 3,551
Smile SAMSUNG GT-I8262 BRUSH HANG ON LOGO Done
SUCCESSFULLY BRUSH HANG ON LOGO(SAMSUNG GT-I8262)USB


I8262XXANB4_OLBBNB2
Phone found on COM20
Phone In Download mode...
Port open Ok!
LOKE received!
Prepare Ok!
Enter Setup...
Setup Done!
Try download PIT...
Download PIT Ok!
Start flashing!

Flashing oemsbl
Flashing appsbl
Flashing qcsbl.mbn
Flashing qcsblhd_cfgdata.mbn
Flashing boot.img
Flashing recovery.img
Flashing system.img.ext4
Flashing userdata.img.ext4
Flashing persist.img.ext4
Flashing fat.bin
Flashing cache.img.ext4
Flashing hidden.img.ext4
Flashing done

Reboot phone...

Phone Disconnected


THANKS INFINITY-BOX TEAM
  Reply With Quote
The Following User Says Thank You to gracy_elec For This Useful Post:
Old 11-09-2018, 10:46   #54387 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,789
Member: 2644066
Status: Offline
Thanks Meter: 1,773
Qmobile w7 hang on logo done by cm2
Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 11 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected NAND Flash , Structure detect Ok!

Formatting NAND Flash
Format UserData
Format Ok!
Format Cache
Format Ok!

Done!

Elapsed: 00:00:45

Reconnect Power/Cable!
  Reply With Quote
Old 11-09-2018, 10:49   #54388 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,789
Member: 2644066
Status: Offline
Thanks Meter: 1,773
Huawei mya l22 reset frp done by cm2
Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 510001154D33314553B30D421DB7DDF2
Initialize Memory ...
DRAM configured from IDB!
DRAM initialize passed!
DRAM size : 0x80000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM31E
[eMMC] : FLASH_CID : 150100514531334D420DB353F2DD841D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0xB9E2EB77E68A3B3D1F62EDDF3E78564D
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!

Done!
Elapsed: 00:00:20
Reconnect Power/Cable!
  Reply With Quote
Old 11-09-2018, 10:57   #54389 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,789
Member: 2644066
Status: Offline
Thanks Meter: 1,773
Vgo tel v2 reset password done by cm2
Operation : Format FileSystem [ v1.03 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_019 54441CD2E_NVM.nv

Executing FormatFFS ...
Format FFS Done!

Done!
Elapsed: 00:00:16

Reconnect Power/Cable!
  Reply With Quote
Old 11-09-2018, 12:13   #54390 (permalink)
No Life Poster
 
trenac's Avatar
 
Join Date: Feb 2010
Location: Macedonia
Age: 49
Posts: 1,741
Member: 1246981
Status: Offline
Sonork: 100.1590424
Thanks Meter: 314
GOME K1 frp reset done

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM7)
MODE : PRELOADER PORT
PORT : 7
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6757 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : PRELOADER PORT
MODE : gome : | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL.bin
AGENT : Found MT6757
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 150100524331344D420715EDD0CDB363
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RC14MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6757 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 7A7D4CCA4ABF7306E1E87C6937ED339

DA : USB : HIGH-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
  Reply With Quote
Reply
Page 3626 of 5073 « First 26263126352635763616362336243625 3626 36273628362936363676372641264626 Last »

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 17:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 11:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 09:03
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 20:17

 



All times are GMT +1. The time now is 23:37.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.71099 seconds with 10 queries

SEO by vBSEO