GSMSERVER GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 05-03-2019, 15:44   #58471 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 3,154
Member: 2644066
Status: Offline
Thanks Meter: 1,069
Gresso m3330 hang on logo done by cm2


Card found : 73CA70CC , v0137
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.04

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]


Operation : Identify [ v1.04 ]

----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x00600000
BOOT_INIT : 0x81C0024C
BOOT_MODE : DOWNLOAD
BOOT_INTV : 6533G-FPTRUNK-W16.44.2
InternalVersion: g8bec5c4c
Setting BOOTROM mode
BOOT_MODE : BOOTROM
Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV : 0xFBA2A250
Boot done!

Identify : Code Integrity Check pass!

Device Info Details :
[0] : S03_DNT_Q14
[1] : 8809
[2] : 8809e2
[3] : CT8851C
[4] : pasw_rda6625
[5] : flsh_spi32m
[6] : gc9304/gc9305/gc9306/nv3029G/rm68090
[7] : bf3a01serial/gc6123/sp0820
[8] : rdabt_8809
[9] : rdafm_8809e
[10] : release
[11] : S03_DNT_Q14-A_GRESSO_XY9306CPT_FF9305CTC_HXW68090CTC_XY9304CTC _HG3029GBOE_6625PA_V03_20181226
[12] : 20181226
[13] : 2018-12-26_21:40:17
[14] : test_version
inf_usb-dll:err [_usb_read_async] timeout error


Done!
Elapsed: 00:02:58

Reconnect Power/Cable!

Operation : Reset Settings [ v1.04 ]
----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x00600000
BOOT_INIT : 0x81C0024C
BOOT_MODE : DOWNLOAD
BOOT_INTV : 6533G-FPTRUNK-W16.44.2
InternalVersion: g8bec5c4c
Setting BOOTROM mode
BOOT_MODE : BOOTROM
Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV : 0xFBA2A250
Boot done!

Preparing PMT
Verifying PMT
Erasing 1474560 bytes

FileSystem format done!


Done!
Elapsed: 00:01:00

Reconnect Power/Cable!

Operation : Read Flash [ v1.04 ]

----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x00600000
BOOT_INIT : 0x81C0024C
BOOT_MODE : BOOTROM
Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV : 0xFBA2A250
Boot done!

Read done, 0x00400000

Verify FlashContent
MCU verified
CAL verified
FAC verified

Device Info Details :
[0] : S03_DNT_Q14
[1] : 8809
[2] : 8809e2
[3] : CT8851C
[4] : pasw_rda6625
[5] : flsh_spi32m
[6] : gc9304/gc9305/gc9306/nv3029G/rm68090
[7] : bf3a01serial/gc6123/sp0820
[8] : rdabt_8809
[9] : rdafm_8809e
[10] : release
[11] : S03_DNT_Q14-A_GRESSO_XY9306CPT_FF9305CTC_HXW68090CTC_XY9304CTC _HG3029GBOE_6625PA_V03_20181226
[12] : 20181226
[13] : 2018-12-26_21:40:17
[14] : test_version

Saved to : E:\Mix Flash Files\GRESSO M3330\
Saved as : SC6533G_4MiB_S03_DNT_Q14_2018-12-26_214017.ilod

inf_usb-dll:err [_usb_read_async] timeout error


Done!
Elapsed: 00:03:13

Reconnect Power/Cable!
  Reply With Quote
Old 05-03-2019, 15:51   #58472 (permalink)
Freak Poster
 
Join Date: Feb 2009
Location: Nigeria
Posts: 165
Member: 974244
Status: Offline
Thanks Meter: 40
Tecno S9 read firmware ok

Card found : S/N : E3B1B8F3 , v0137
Chinese Miracle II [MTK module] v 1.58

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 142 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 700100533130303038060BDD5A415117
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 80001
[eMMC] : FLASH_CID : 700100533130303038060BDD5A415117
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x9BE78CE1D0E6C0AC0A9DF05924477330
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand : TECNO
ProdName : reallytek82_tb_jb5
ProdModel : TECNO S9
Device : gp831_a1_cy_aisai
AndroidVer: 4.2.2
MTKxCPU : MT6582
MTKxPRJ : S9-GP831-20140710

Fatal error, buffer empty! Phone connection lost???
Error while reading block! Something went wrong

Read error

Operation Failed
Elapsed: 00:00:47
Reconnect Power/Cable!


Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 142 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 700100533130303038060BDD5A415117
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 80001
[eMMC] : FLASH_CID : 700100533130303038060BDD5A415117
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x9BE78CE1D0E6C0AC0A9DF05924477330
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand : TECNO
ProdName : reallytek82_tb_jb5
ProdModel : TECNO S9
Device : gp831_a1_cy_aisai
AndroidVer: 4.2.2
MTKxCPU : MT6582
MTKxPRJ : S9-GP831-20140710

[Read Ok] : preloader_reallytek82_tb_jb5.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / reallytek82_tb_jb5 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 1991 MiB
Scatter saved to : C:\Users\princejt\Desktop\vol music\CM2\MT6582__TECNO__TECNO_S9__gp831_a1_cy_ais ai__4.2.2__S9-GP831-20140710\

All done!

Done!
Elapsed: 00:08:53
Reconnect Power/Cable!
  Reply With Quote
Old 05-03-2019, 15:54   #58473 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 3,154
Member: 2644066
Status: Offline
Thanks Meter: 1,069
Gresso m3330 flash file

Operation: Upload
File: E:\Mix Flash Files\GRESSO M3330 SC6533G_4MiB_S03_DNT_Q14_2018-12-26_214017.rar
Authentication...
Initialization...
5/3/2019: 19:49:08: Upload file 2.99 Mb
5/3/2019: 19:49:12: Uploading 2.99 Mb...
5/3/2019: 19:49:46: Finished

Card found : 73CA70CC , v0137
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.04

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]


Operation : Identify [ v1.04 ]

----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x00600000
BOOT_INIT : 0x81C0024C
BOOT_MODE : DOWNLOAD
BOOT_INTV : 6533G-FPTRUNK-W16.44.2
InternalVersion: g8bec5c4c
Setting BOOTROM mode
BOOT_MODE : BOOTROM
Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV : 0xFBA2A250
Boot done!

Identify : Code Integrity Check pass!

Device Info Details :
[0] : S03_DNT_Q14
[1] : 8809
[2] : 8809e2
[3] : CT8851C
[4] : pasw_rda6625
[5] : flsh_spi32m
[6] : gc9304/gc9305/gc9306/nv3029G/rm68090
[7] : bf3a01serial/gc6123/sp0820
[8] : rdabt_8809
[9] : rdafm_8809e
[10] : release
[11] : S03_DNT_Q14-A_GRESSO_XY9306CPT_FF9305CTC_HXW68090CTC_XY9304CTC _HG3029GBOE_6625PA_V03_20181226
[12] : 20181226
[13] : 2018-12-26_21:40:17
[14] : test_version
inf_usb-dll:err [_usb_read_async] timeout error


Done!
Elapsed: 00:02:58

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to A.G.Shahid For This Useful Post:
Old 05-03-2019, 19:05   #58474 (permalink)
No Life Poster
 
Yusuf Lawal's Avatar
 
Join Date: Oct 2011
Location: Nigeria
Posts: 5,767
Member: 1677653
Status: Offline
Thanks Meter: 2,177
Donate money to this user
Inifinix x608 password + frp done

Card found : A6936825 , v0137
Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.16


Operation : Identify [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 425 [MSM8917]
ID_BLOCK_S : 28F9A1AE
ID_BLOCK_L : 3BCDA75FFE64919C4B20D03DFA41D1F9
ID_BLOCK_L : D0A36DBCB1208A1BBE79528B99140249
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8917 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : QE63MB
Boot Ok!


Brand : Infinix
ProdName : QL1661
ProdModel : Infinix X608
Device : Infinix-X608
AndroidVer: 8.0.0
Manufact. : INFINIX MOBILITY LIMITED
SysPatch : OPR1.170623.032
DevComTime: 3/11/2019 3:21:27 PM
QLMxPRJ : X608-QL1661ABCDEF-O-190312V28

USERData : ENCRYPTED
GCSec : NORMAL

Done!
Elapsed: 00:00:20

Reconnect Power/Cable!

Operation : Reset Settings [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 425 [MSM8917]
ID_BLOCK_S : 28F9A1AE
ID_BLOCK_L : 3BCDA75FFE64919C4B20D03DFA41D1F9
ID_BLOCK_L : D0A36DBCB1208A1BBE79528B99140249
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8917 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : QE63MB
Boot Ok!

Format USER ...
Format CACHE ...
Format Ok!
Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:23

Reconnect Power/Cable!
  Reply With Quote
Old 05-03-2019, 19:07   #58475 (permalink)
No Life Poster
 
Yusuf Lawal's Avatar
 
Join Date: Oct 2011
Location: Nigeria
Posts: 5,767
Member: 1677653
Status: Offline
Thanks Meter: 2,177
Donate money to this user
Infinix x623 frp reset + format all done

Card found : A6936825 , v0137
Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.16


Operation : Identify [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 425 [MSM8917]
ID_BLOCK_S : D0A10481
ID_BLOCK_L : 06FE9462CD5946413E13FDE22D74FCCC
ID_BLOCK_L : 780BB514198832B356A1EA2321CCDAE1
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8917 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : GD6BMB
Boot Ok!


Brand : Infinix
ProdName : QL1819
ProdModel : Infinix X623
Device : Infinix-X623
AndroidVer: 8.1.0
Manufact. : INFINIX MOBILITY LIMITED
SysPatch : OPM1.171019.026
DevComTime: 3/18/2019 2:37:23 AM
QLMxPRJ : X623-QL1819ABCDEFI-O-190316V50

USERData : ENCRYPTED
GCSec : NORMAL

Done!
Elapsed: 00:00:21

Reconnect Power/Cable!

Operation : Reset Settings [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 425 [MSM8917]
ID_BLOCK_S : D0A10481
ID_BLOCK_L : 06FE9462CD5946413E13FDE22D74FCCC
ID_BLOCK_L : 780BB514198832B356A1EA2321CCDAE1
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8917 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : GD6BMB
Boot Ok!

Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:23

Reconnect Power/Cable!

Operation : Reset Settings [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 425 [MSM8917]
ID_BLOCK_S : D0A10481
ID_BLOCK_L : 06FE9462CD5946413E13FDE22D74FCCC
ID_BLOCK_L : 780BB514198832B356A1EA2321CCDAE1
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8917 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : GD6BMB
Boot Ok!

Format USER ...
Format CACHE ...
Format Ok!
Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:24

Reconnect Power/Cable!
  Reply With Quote
Old 05-04-2019, 05:56   #58476 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Earth
Posts: 7,983
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 14,913
Smile gFive falak Format DOne

SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]

Operation : Format FileSystem [ v1.04 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v1.1 (c)2019
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_086 F1983B146_NVM.nv

Executing FormatFFS ...
Format FFS Done!

Done!
Elapsed: 00:00:15

Reconnect Power/Cable!
  Reply With Quote
Old 05-04-2019, 06:57   #58477 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 3,154
Member: 2644066
Status: Offline
Thanks Meter: 1,069
Motorola moto g4 play reset frp done by cm2

Card found : 73CA70CC , v0137
Infinity-Box Android Service Tool [AST] v1.03

Operation : Identify [ v1.03 ]
Waiting for device in fastboot mode ...
1. Power off device. Press and hold 'VOL DOWN' button
2. Insert USB cable, hold button until device will be found!
Connect Ok!
Main Info ============
CPU : MSM8916
CID : 0x0002
UID : 728F342300000000000000000000

Model Info ============
IntName : harpia

SW Info ============
DevSWVer : Blur_Version.24.201.3.harpia_vzw.verizon.en.US
DevQCVer : AU_LINUX_ANDROID_LA.BR.1.1.3_RB1.05.01.00.032.015
BaseBand : M8916_20250106.08.05.23.01R HARPIA_NA_CUST
BootLDRv : moto-msm8916-81.04

HW Info ============
eMMCInfo : 16GB Samsung REV=08 PRV=07 TYPE=57
DRAMInfo : 2GB Samsung S8 SDRAM DIE=8Gb

Lock Info ============
BLUnlock : no
WarrantyVoid : no
FRP Lock : protected (77)

Done!
Elapsed: 00:00:06

Operation : Moto ADB Enable [ v1.03 ]
Mode : Enable Factory
Waiting for device in fastboot mode ...
1. Power off device. Press and hold 'VOL DOWN' button
2. Insert USB cable, hold button until device will be found!
Connect Ok!
Operation done!
-- > Info : Wait till device boot, make "Enable ADB" operation after
-- > Info : Don't forget DISABLE "FACTORY MODE" after make "RESET FRP"!


Done!
Elapsed: 00:00:06

Operation : Moto ADB Enable [ v1.03 ]
Mode : Enable ADB
Waiting for NetInterface arrival ...
1. Power off device. Press and hold 'VOL DOWN' and 'POWER ON' buttons
2. Select by 'VOL DOWN' or 'VOL UP' FACTORY MODE , press 'POWER ON'
3. Connect USB cable, when device boot complete!
Connect Ok!
Waiting ...
Trying link with : 192.168.137.2
Connected to device!
Device : XT1609
Switching to FACTORY ...
Setting Unsecure mode
Waiting device ...
Connect Ok!
Trying link with : 192.168.137.2
Connected to device!
Device : XT1609
Setting ADB ...
Waiting device ...
Connect Ok!
Trying link with : 192.168.137.2
Connected to device!
Device : XT1609
Setting ADB ...

1. Disconnect cable from device, wait device reboot
2. Make "Reset FRP"
3. Disable "FACTORY MODE" after operations done!


Done!
Elapsed: 00:00:40

Operation : Reset FRP (ADB) [ v1.03 ]
Waiting for device in ADB mode ...
1. Connect device, enable 'DEVELOPER MODE' and 'USB DEBUG', if need!
2. Insert USB cable, accept AUTH on PhoneScreen, if software ask!
Connect Ok!
Device : harpia_vzw
Model : XT1609
FRP reset passed! Make FACTORY RESET from menu!
-- > MOTO FRP : Don't forget to DISABLE FACTORY MODE!

Done!
Elapsed: 00:00:12

Operation : Moto ADB Enable [ v1.03 ]
Mode : Disable Factory
Waiting for device in fastboot mode ...
1. Power off device. Press and hold 'VOL DOWN' button
2. Insert USB cable, hold button until device will be found!
Connect Ok!
Operation done!


Done!
Elapsed: 00:00:07
  Reply With Quote
Old 05-04-2019, 08:12   #58478 (permalink)
Freak Poster
 
Join Date: Jun 2009
Posts: 307
Member: 1051138
Status: Offline
Sonork: 123456
Thanks Meter: 292
coolpade 3505i read flash done

Chinese Miracle II [MTK module] v 1.58

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 470001154D4236456F5503423F2DB4B4
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMB6E
[eMMC] : FLASH_CID : 150100474536424D4203556FB4B4A43F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0x199FFE86489706CC39D09C0F121C121D
INT RAM : 0x00020000
EXT RAM : 0xC0000000 [3 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : Coolpad
ProdName : CP3505I
ProdModel : Coolpad 3505I
Device : CP3505I
AndroidVer: 6.0
MTKxCPU : MT6735
MTKxPRJ : alps-mp-m0.mp1-V2.84_yl6735.66.m0_P88

[Read Ok] : preloader_cp3505i.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : lk_bak.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : oem.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735 / V1.1.2 / cp3505i / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 3593 MiB
Scatter saved to : C:\Users\akeel\Desktop\MT6735__Coolpad__Coolpad_35 05I__CP3505I__6.0__alps-mp-m0.mp1-V2.84_yl6735.66.m0_P88\

All done!

Done!
Elapsed: 00:08:07
Reconnect Power/Cable!
  Reply With Quote
Old 05-04-2019, 08:14   #58479 (permalink)
Freak Poster
 
Join Date: Jun 2009
Posts: 307
Member: 1051138
Status: Offline
Sonork: 123456
Thanks Meter: 292
coolpade 3505i frp reset done

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 470001154D4236456F5503423F2DB4B4
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMB6E
[eMMC] : FLASH_CID : 150100474536424D4203556FB4B4A43F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0x199FFE86489706CC39D09C0F121C121D
INT RAM : 0x00020000
EXT RAM : 0xC0000000 [3 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!

Done!
Elapsed: 00:00:12
Reconnect Power/Cable!
  Reply With Quote
Old 05-04-2019, 08:22   #58480 (permalink)
No Life Poster
 
Ankit Verma's Avatar
 
Join Date: May 2007
Location: Indore
Posts: 550
Member: 506648
Status: Offline
Sonork: 100.1614254
Thanks Meter: 676
Donate money to this user
VIVO Y11 Phone Lock Reset by Infinity CM2 Dongle

VIVO Y11 Phone Lock Reset by Infinity CM2 Dongle

Thanks To Infinity CM2 Dongle

http://www.youtube.com/watch?v=hQWJULrq06A
  Reply With Quote
The Following User Says Thank You to Ankit Verma For This Useful Post:
Old 05-04-2019, 11:24   #58481 (permalink)
No Life Poster
 
yuranc8's Avatar
 
Join Date: Feb 2017
Location: Quelimane Mz
Age: 22
Posts: 1,286
Member: 2680008
Status: Offline
Thanks Meter: 608
Donate money to this user
Thumbs up Tecno ka7 mt6580 8.1.0 frp done

Operation : Identify [ v2.05 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM17)
MODE : PRELOADER PORT
PORT : 17
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : PRELOADER PORT
MODE : TECNO : BASE_SECURE | Manual : Enabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA_SP.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 460001154D323645C6B10342191611F2
DAInf: 4 : 2 : 156
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

EMMC: 150100464536324D4203B1C6F2111619
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FE62MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3A3E00000 [ 14.56 GB ]

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]

CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 3E89597F3B5609471F7A584D8A64B1D6

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level : O11019
Display ID : KA7-H8024ABC-GO-181227V193
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-12-05
Build Time : 1545840469
Product Model : TECNO KA7
Product Brand : TECNO
Product Name : H8024
Product Device : TECNO-KA7-GO
Product Manfct : TECNO MOBILE LIMITED
Product Info : TECNO-KA7-GO
Board Platform : mt6580

USERDATA : ENCRYPTED



Done!
Elapsed: 00:00:43

Operation : Memory Tool Init [ v2.05 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM17)
MODE : PRELOADER PORT
PORT : 17
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : PRELOADER PORT
MODE : TECNO : BASE_SECURE | Manual : Enabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA_SP.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 460001154D323645C6B10342191611F2
DAInf: 4 : 2 : 156
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

EMMC: 150100464536324D4203B1C6F2111619
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FE62MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3A3E00000 [ 14.56 GB ]

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]

CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 3E89597F3B5609471F7A584D8A64B1D6

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Set default path : C:\InfinityBox\CM2MT2\phdata\

Ready!

Operation : Erase Memory

Erase selected partitions [3]
[0] Erase partition : FRP
Erase partition Ok!
[1] Erase partition : CACHE
Erase partition Ok!
[2] Erase partition : USERDATA
Erase partition Ok!

Operation finished!

Operation : Update Memory Info


Operation finished!



Close MemoryTool session

Done!
Elapsed: 00:01:57

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to yuranc8 For This Useful Post:
Old 05-04-2019, 11:56   #58482 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 3,154
Member: 2644066
Status: Offline
Thanks Meter: 1,069
Vgo tel i800 reset password done by cm2

Card found : S/N : 73CA70CC , v0137
Chinese Miracle II [MTK module] v 1.58

Operation : Reset UserCode [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 15 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CA02
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 44513420D2A5F2B2B251775D5DC806E6
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , [MXIC] MX25L3291FWJI_09
[0] : FLASH_DIE : 00C2 0020 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

Backup done
Read ExtData
Sorting ExtData
Sort Ok, Rebuild Ok
Restore ExtData
All done
UserCode request removed
UserCode set to default ( 0000 or 1122 )

Done!
Elapsed: 00:00:11
Reconnect Power/Cable!
  Reply With Quote
Old 05-04-2019, 11:58   #58483 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 3,154
Member: 2644066
Status: Offline
Thanks Meter: 1,069
G five gold reset password done by cm2

Card found : 73CA70CC , v0137
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.04

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]


SPRD mode : SC6531 : REV : E000 : NOR : [ 4MB ]

Operation : Format FileSystem [ v1.04 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_0D7 0DF088F7A_NVM.nv

Executing FormatFFS ...
Format FFS Done!

Done!
Elapsed: 00:00:23

Reconnect Power/Cable!
  Reply With Quote
Old 05-04-2019, 12:35   #58484 (permalink)
No Life Poster
 
nessyb's Avatar
 
Join Date: Jan 2013
Location: zimbabwe south africa
Posts: 1,434
Member: 1866877
Status: Offline
Sonork: 100.1681933
Thanks Meter: 681
Thumbs up WORLD FIRST Gtel x7s read firmware and frp done

Code:
Operation : Read Firmware [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM45)
MODE : BOOTROM
PORT : 45
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+ARB
BROM : BOOTROM
MODE : gtel_x7s : s7s_| Manual : Disabled
BROM : ARB : ACTIVE : LOG : F0: 102B 0000  F3: 0000 0000 [0200]  V0: 0000 0000 [0001]
BROM : SOCID : 37F26825E077D74393C9968C11C0F356E826B8E0899C4E5F5E766D77E00888EB
BROM : SLA
BROM : SLA Passed!
BROM : SLA CHLNG not used
AGENT : Look for suitable BootChain in DA ... 
AGENT : mtk_x7s_loader_v3.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : MT6765
     EMI : SRC : preloader_kgn45_g.bin
     EMI : CNT : 0004
     EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG   | DEV : RD64MB : RAM : [ 4.00 GB ]
     EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG   | DEV : RH64AB : RAM : [ 4.00 GB ]
     EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG   | DEV : GD6BMB : RAM : [ 3.00 GB ]
     EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 4.00 GB ]
     EMI : Init EMI from PRELOADER
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x30000000 [ 768.00 MB ]

        EMMC: 1501004744364244201065596C5454F
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : GD6BMB
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 

DA : USB : HIGH-SPEED

Boot done!

Display ID     : X7s
Product Info   : Gtel_X7s
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-08-05
Product Board  : Gtel_X7s
Product Brand  : Gtel
Product Device : Gtel_X7s
Product Manfct : Gtel
Product Model  : Gtel X7s
Product Name   : X7s
Board Platform : mt6765

MT6765__Gtel__Gtel_X7s__8.1.0__X7s

Read : preloader.bin
Read : recovery.img
Read : persist.img
ExtSparse : Compression ratio : 96%
Read : proinfo.img
Read : efuse.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : tinysys-sspm.bin
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : odmdtbo.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 56%
Read : system.img
ExtSparse : Compression ratio : 11%
Read : cache.img
Read : userdata.img

FW Size  : 3.21 GB
Android Info saved : _Android_info.txt
Scatter  : MT6765_Android_scatter.txt
Saved to : xxMT6765__Gtel__Gtel_X7s__8.1.0-Gtel_X7s\

Done!
Elapsed: 00:05:36

FRP


Code:
      SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x30000000 [ 768.00 MB ]

        EMMC: 1501004744364244201065596C5454F
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : GD6BMB
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 

DA : USB : HIGH-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:16

Reconnect Power/Cable!
  Reply With Quote
The Following 5 Users Say Thank You to nessyb For This Useful Post:
Show/Hide list of the thanked
Old 05-04-2019, 13:21   #58485 (permalink)
Insane Poster
 
Join Date: Mar 2017
Location: Zimbabwe
Posts: 64
Member: 2692778
Status: Offline
Thanks Meter: 17
Donate money to this user
FAILED TO FORMART THIS PHONE WITH MT2 V 2.05 PLEASE HELP
Operation : Reset Settings/Format FS [ v2.05 ]


Info : Operation break by user!

Reconnect Power/Cable!


Operation : Reset Settings/Format FS [ v2.05 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM9)
MODE : PRELOADER PORT
PORT : 9
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6572 , SBID : 0x8B00 , HWVR : 0xCA01 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : MT6570_INFINITY | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6572
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : OK
NAND : 002C00BC0090005500560000
eMMC : BROM : DA NOT ACCEPTED
eMMC : 00000000000000000000000000000000
DAInf: 4 : 2 : 136
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

NAND: 00932C00BC00900055005600
NAND:
TSIZE : 0x20000000 [ 512.00 MB ]
ASIZE : 0x00000000 [ 0 B ]
PSIZE : 0x00000800 [ 2.00 KB ]
BSIZE : 0x00020000 [ 128.00 KB ]
SSIZE : 0x00000040
STYPE : 0x0000

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x10000000 [ 256.00 MB ]

CHIP : MT6572 , SBID : 0x8B00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 8B5F88B7CE2235AC1C3AB1E337529484

STATUS : BLANK FLASH
BSTYLE : NAND FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!


Error : Failed to read initial info! Erased/Damaged or unsupported device???
Seems as something wrong with device! Check battery charge and device state!

Reconnect Power/Cable!
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 16:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 11:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 08:03
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 20:17

 



All times are GMT +1. The time now is 12:44.



Powered by Searchlight © 2020 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.87326 seconds with 9 queries

SEO by vBSEO