GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 06-22-2019, 10:29   #59296 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 8,670
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,368
Qmobile I6I MT6580 FRP Reset Done With King Infinity CM2



Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 258 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100464A32374D42020D4E9AE93389
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM72J
[eMMC] : FLASH_CID : 150100464A32374D42020D4E9AE93389
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0xD9C8F395DBF62F0077105D3480246C92
INT RAM : 0x00020000
EXT RAM : 0x30000000 [768 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!
Clear DIN
Clear Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:26
Reconnect Power/Cable!


  Reply With Quote
Old 06-22-2019, 13:33   #59297 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Sindh Pakistan
Posts: 8,857
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 15,419
Smile VGoTel Ocean 9 F.R.p Done

Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 11 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x00000002D67F7000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x/6.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:30

Reconnect Power/Cable!
  Reply With Quote
Old 06-22-2019, 16:34   #59298 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,775
Member: 2644066
Status: Offline
Thanks Meter: 1,772
Qmobile i6i hang on logo done by cm2

Card found : S/N : 73CA70CC , v0137
Chinese Miracle II [MTK module] v 1.58

Scatter Load Ok , BaseBand : MT6580 , Project : s5030 , Storage : EMMC
Files found : 9 , Set to Flash : 8
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : QMobile
Device Model : QMobile
Device CPU : MT6580
Device IntName : QMobile i6i
Device Version : 5.1
Device Compile : 6/20/2016 2:31:53 PM
Device Project : ALPS.L1.MP6.V2_TINNO6580.WE.L
Device ExtInfo : QMobile i6i
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100464A32374D4202F527683683DD
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM72J
[eMMC] : FLASH_CID : 150100464A32374D4202F527683683DD
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0xB9E2EB775AA2E483E18AC5FAAACB5D1F
INT RAM : 0x00020000
EXT RAM : 0x30000000 [768 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6580 , Project : s5030 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 3599 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 1
Erase : 0x0000000001C80000-0x00000000E6300000
Flash Pre-Erase Done, time used : 00:00:02

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_s5030.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0014
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : LK
Image Flash Ok
Flash now : BOOT
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : SECRO
Image Flash Ok
Flash now : SYSTEM
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USERDATA
Image Flash Ok
Flash Write Done, time used : 00:03:04

Processing : Verify
Verify Passed : LK
Verify Passed : BOOT
Verify Passed : RECOVERY
Verify Passed : LOGO
Verify Passed : SECRO
Verify Passed : SYSTEM
Verify Passed : CACHE
Verify Passed : USERDATA
Data Verify Done, time used : 00:00:04

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:03:27
Reconnect Power/Cable!
  Reply With Quote
Old 06-22-2019, 16:36   #59299 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,775
Member: 2644066
Status: Offline
Thanks Meter: 1,772
QMOBILE X700i HANG ON LOGO DONE BY CM2

Card found : S/N : 73CA70CC , v0137
Chinese Miracle II [MTK module] v 1.58

Scatter Load Ok , BaseBand : MT6580 , Project : d5110_qmobile , Storage : EMMC
Files found : 9 , Set to Flash : 8
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : QMobile
Device Model : d5110_qmobile
Device CPU : MT6580
Device IntName : d5110_qmobile
Device Version : 5.1
Device Compile : 7/17/2015 12:51:50 PM
Device Project : ALPS.L1.MP6.V2_RGK6580.WE.L_P2
Device ExtInfo : QMobile X700i
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100523832314D4200E003CA6E722B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM128
[eMMC] : FLASH_CID : 150100523832314D4200E003CA6E722B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0x0CF2E6DE176B77EE19AD1C77DEB15E93
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6580 , Project : d5110_qmobile , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 3550 mV
BL : [WARNING] : BatteryLevel LOW!!!

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000001C80000-0x0000000003320000
Erase : 0x00000000050A0000-0x000000039DCE0000
Flash Pre-Erase Done, time used : 00:00:08

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_d5110_qmobile.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0014
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : LK
Image Flash Ok
Flash now : BOOT
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : SECRO
Image Flash Ok
Flash now : SYSTEM
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USERDATA
Image Flash Ok
Flash Write Done, time used : 00:08:34

Processing : Verify
Verify Passed : LK
Verify Passed : BOOT
Verify Passed : RECOVERY
Verify Passed : LOGO
Verify Passed : SECRO
Verify Passed : SYSTEM
Verify Passed : CACHE
Verify Passed : USERDATA
Data Verify Done, time used : 00:00:03

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:08:57
Reconnect Power/Cable!
  Reply With Quote
Old 06-22-2019, 16:38   #59300 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,775
Member: 2644066
Status: Offline
Thanks Meter: 1,772
Qmobile z8 reset frp done by cm2

Card found : 73CA70CC , v0137
Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.16


Operation : Reset Settings [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 13C4F629
ID_BLOCK_L : BE463CDA75E1EE19C6BB55BA85DC5474
ID_BLOCK_L : 9FF658F3E46FDF54694409C6CC233D1E
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB800000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Format USER ...
Format CACHE ...
Format Ok!
Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:17

Reconnect Power/Cable!
  Reply With Quote
Old 06-22-2019, 16:40   #59301 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,775
Member: 2644066
Status: Offline
Thanks Meter: 1,772
Motorola xt907 hang on logo done by cm2

Card found : 73CA70CC , v0137
Infinity-Box Android Service Tool [AST] v1.03

Operation : Reset Settings [ v1.03 ]
Mode : Format FS
Waiting for device in fastboot mode ...
1. Power off device. Press and hold 'VOL DOWN' button
2. Insert USB cable, hold button until device will be found!
Connect Ok!
Block [1] ERASE OK!
Block [2] ERASE OK!

Done!
Elapsed: 00:00:18
  Reply With Quote
Old 06-23-2019, 06:36   #59302 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 4,574
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 761
5Star GR5 Firmware Read Done By CM2

Wait for phone...
Phone found! [ 9 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483447316404860EA2283290BB
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A483447316404860EA2283290BB
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID : 0xD3510ECE3FF0FC65DDB97FDF68CA1D60
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : GR5
ProdName : GR5
ProdModel : GR5
Device : GR5
AndroidVer: 7.0
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_YUANDA6580.WE.L

[Read Ok] : preloader_yuanda6580_we_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / yuanda6580_we_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1332 MiB
Scatter saved to : C:\nobichanmaruf\Desktop\MT6580__GR5__GR5__GR5__7. 0__ALPS.L1.MP6.V2_YUANDA6580.WE.L\

All done!

Done!
Elapsed: 00:06:48
Reconnect Power/Cable!
  Reply With Quote
Old 06-23-2019, 06:38   #59303 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 4,574
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 761
5Star GR6 Firmware Read Done By CM2

> Wait phone connected ...

Phone found! [ 3 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : m035_mjl
Model Brand : JHM
Model Device: m035_mjl
AndrVersion : 6.0
BaseBand CPU: S06_JHM_M036
Project Ver : JHM_GR6_4_20170802_V02_Duble_CARD
Model Ext : GR6

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W16.29.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2088 MiB
Saved to : C:\Users\nobichanmaruf\Desktop\S06_JHM_M036_m035_m jl_6.0_JHM_GR6_4_20170802_V02_Duble_CARD_GR6\
Done!

Elapsed: 00:36:43

Reconnect Power/Cable!
  Reply With Quote
Old 06-23-2019, 06:40   #59304 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 4,574
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 761
5 Star RX 1 Firmware Read Done By CM2

Reading Flash Content now ...
USBDL : Init HSUSB Ok!

Brand : alps
ProdName : RX-1
ProdModel : RX-1
Device : d37f6
AndroidVer: 6.0
MTKxCPU : MT6572
MTKxPRJ : D37F6_YBZ_RX_1_5STAR_EMMC4_32_M06_20170420_1547

[Read Ok] : preloader_d37f6.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / d37f6 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 802 MiB
Scatter saved to : \MT6572__alps__RX-1__d37f6__6.0__D37F6_YBZ_RX_1_5STAR_EMMC4_32_M06_2 0170420_1547\

All done!
  Reply With Quote
Old 06-23-2019, 06:45   #59305 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 4,574
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 761
5Star RX1 Firmware Read Done By CM2

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A2058494E594816A106EA34303B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A106EA34303B
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID : 0xD3510ECE418046F7C1D2074E4046F426
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : RX1
ProdName : A5
ProdModel : RX-1
Device : RX1
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29

[Read Ok] : preloader_b36e541b15.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / b36e541b15 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2044 MiB
Scatter saved to : C:\Users\nobichanmaruf\Desktop\MT6580__RX1__RX-1__RX1__6.0__alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29\

All done!
  Reply With Quote
Old 06-23-2019, 06:47   #59306 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 4,574
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 761
5Star RX1 Firmware Read Done By CM2

Reading Flash Content now ...
xGPT : Normalize settings Ok!
Brand : RX-1
ProdName : RX-1
ProdModel : RX-1
Device : RX-1
AndroidVer: 7.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29
[Read Ok] : preloader_b36a_j5_1.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6580 / V1.1.2 / b36a_j5_1 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1652 MiB
Scatter saved to : C:\\MT6580__RX-1__RX-1__RX-1__7.0__alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29\
All done!
Done!
Elapsed: 00:11:13
Reconnect Power/Cable!
  Reply With Quote
Old 06-23-2019, 06:49   #59307 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 4,574
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 761
5 Star RX 2 Firmware Read Done By CM2

Reading Flash Content now ...

Brand : UUK
ProdName : RX-2
ProdModel : RX-2
Device : UUK
AndroidVer: 6.0
MTKxCPU : MT6572
MTKxPRJ : ALPS.KK1.MP7.V1

[Read Ok] : preloader_yuanda72_cwet_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / yuanda72_cwet_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 678 MiB
Scatter saved to : \MT6572__UUK__RX-2__UUK__6.0__ALPS.KK1.MP7.V1\

All done!
  Reply With Quote
Old 06-23-2019, 06:55   #59308 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 4,574
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 761
5 Star RX 4 Firmware Read Done By CM2

Reading Flash Content now ...

Brand : RX-4
ProdName : hct82_cwet_kk
ProdModel : RX-4
Device : hct82_cwet_kk
AndroidVer: 4.4.2
MTKxCPU : MT6582
MTKxPRJ : R05

[Read Ok] : preloader_hct82_cwet_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / hct82_cwet_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 940 MiB
Scatter saved to : E:\nobichanmaruf\MT6582__RX-4__RX-4__hct82_cwet_kk__4.4.2__R05\

All done!
  Reply With Quote
Old 06-23-2019, 06:56   #59309 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 4,574
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 761
5 Star RX 5 Firmware Read Done By CM2

Reading Flash Content now ...

[Read Ok] : preloader_e118_lca.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img

[ScatCFG] : MT6572 / V1.1.1 / e118_lca / NAND
FW Size : 297 MiB

Brand : 5STAR
ProdName : RX-5
ProdModel : RX-5
Device : RX-5
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1

Android Info saved

Scatter saved to : \MT6572_NAND_5STAR__RX-5__RX-5__4.2.2__ALPS.JB3.MP.V1

Done!
  Reply With Quote
Old 06-23-2019, 06:58   #59310 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 4,574
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 761
5 Star T40+ Firmware Read Done By CM2

Brand : JTY
ProdName : kt07b_hbd_t40
ProdModel : T40+
Device : kt07b_hbd_t40
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : KT07B.3G-20150327

[Read Ok] : preloader_kt07b_hbd_t40.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / kt07b_hbd_t40 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 937 MiB
Scatter saved to : C:\Users\nobichanmaruf\Desktop\MT6572__JTY___T40+_ _kt07b_hbd_t40__4.4.2__KT07B.3G-20150327\

All done!
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 17:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 11:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 09:03
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 20:17

 



All times are GMT +1. The time now is 19:37.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.64060 seconds with 10 queries

SEO by vBSEO