GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 10-29-2019, 07:02   #61036 (permalink)
Freak Poster
 
limonbogra's Avatar
 
Join Date: Aug 2018
Location: bagbari bogra dhaka bangladesh
Posts: 250
Member: 2856614
Status: Offline
Sonork: 100.650600
Thanks Meter: 149
symphony v98 spd773x 8.1.0 frp reset by cm2


1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP

Reconnect Power/Cable!


Done!
Elapsed: 00:00:30
  Reply With Quote
The Following 2 Users Say Thank You to limonbogra For This Useful Post:
Old 10-29-2019, 07:18   #61037 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 4,081
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 458
Mircomax Q3555 FRP Remove Done By CM2

==== Wait for phone...

Phone found! [ 4 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x000000013F4F7000
State : 0x0001

Mount : /cache
Size : 0x000000000DC00000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x/6.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:16

Reconnect Power/Cable!
  Reply With Quote
Old 10-29-2019, 12:56   #61038 (permalink)
No Life Poster
 
4G Telecom's Avatar
 
Join Date: Jul 2015
Location: India
Posts: 577
Member: 2421242
Status: Offline
Sonork: 100.1614558
Thanks Meter: 693
Donate money to this user
Tecno KB2 32GB+2GB D2 Formatting done
Read Info ...................
Quote:
Operation : Identify [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM8)
MODE : PRELOADER PORT
PORT : 8
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Enabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 7001005441323833322019E6A3C4C56B
EMMC: VEN : KINGSTON | OEM : 01 | DEV : TA2832
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x74A000000 [ 29.16 GB ]

CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 8A8A7081FB559FE86D7688F762166597

DA : USB : HIGH-SPEED

Boot done!

Patch Level : O11019
Display ID : KB2-H613DJ-O-190111V118
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2019-01-05
Build Time : 1547198231
Product Model : TECNO KB2
Product Brand : TECNO
Product Name : H613
Product Device : TECNO-KB2
Product Manfct : TECNO MOBILE LIMITED
Product Info : kb2_h613
Board Platform : mt6761
Product Board : TECNO-KB2

USERDATA : ENCRYPTED


Done!
Elapsed: 00:00:16
Format............
Quote:
Operation : Reset Settings/Format FS [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM8)
MODE : PRELOADER PORT
PORT : 8
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Enabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 7001005441323833322019E6A3C4C56B
EMMC: VEN : KINGSTON | OEM : 01 | DEV : TA2832
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x74A000000 [ 29.16 GB ]

CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 8A8A7081FB559FE86D7688F762166597

DA : USB : HIGH-SPEED

Boot done!

Format Ok : USERDATA
Format Ok : CACHE
Format Ok : RESET PROTECTION
Format Ok : USERDATA

Done!
Elapsed: 00:00:32

Reconnect Power/Cable!

  Reply With Quote
Old 10-29-2019, 13:37   #61039 (permalink)
Junior Member
 
Join Date: Dec 2017
Posts: 30
Member: 2788489
Status: Offline
Thanks Meter: 35
RANGS S100 Wireless flash file cm2 read

RANGS S100 Wireless bin flash file

RANGS S100 Wireless busy call solution

RANGS S100 Wireless flash file cm2 read

http://www.youtube.com/watch?v=FP1Hq1mj8NI&feature
  Reply With Quote
The Following User Says Thank You to kg tel For This Useful Post:
Old 10-29-2019, 13:45   #61040 (permalink)
No Life Poster
 
Tanha0321's Avatar
 
Join Date: Jul 2006
Location: Pakistan karachi
Posts: 7,881
Member: 314003
Status: Offline
Thanks Meter: 2,783
TECNO KC1 Frp Reset

Code:
Patch Level    : PPR1.180610.011
Display ID     : KC1-H6114A-P-190912V205
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2019-08-05
Build Time     : 1568266395
Product Model  : TECNO KC1
Product Brand  : TECNO
Product Name   : H6114A
Product Device : TECNO-KC1
Product Manfct : TECNO MOBILE LIMITED
Product Info   : kc1_h6114
Product Board  : TECNO-KC1
Board Platform : mt6761

USERDATA : ENCRYPTED 

NVRAM check : Passed!

Done!
Elapsed: 00:00:25

Operation : Reset Settings/Format FS [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM11)
MODE : PRELOADER PORT
PORT : 11
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1836 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA_SWSEC.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00080000 [ 512.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 90014A484147346132A552001261A54B
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HAG4a2
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3AB400000 [ 14.68 GB ]

        CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : E6AC7B36388C2CBF3BE55D8B0B1BDFF

DA : USB : HIGH-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:26

Reconnect Power/Cable!
  Reply With Quote
Old 10-30-2019, 05:29   #61041 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 4,206
Member: 2644066
Status: Offline
Thanks Meter: 1,670
Qmobile m2 hang on logo done by cm2


Card found : 73CA70CC , v0137
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.04

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]


SPRD mode : SC6531 : REV : 0000 : NOR : [ 8MB-16MB]

Operation : Identify [ v1.04 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 653x NOR v1.3(c)2019
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

IMEI[1] :
IMEI[2] :

Done!
Elapsed: 00:00:19

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.04 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 653x NOR v1.3(c)2019
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_156 C528ADD2B_NVM.nv

Executing FormatFFS ...
Format FFS Done!

Done!
Elapsed: 00:00:24

Reconnect Power/Cable!

  Reply With Quote
Old 10-30-2019, 05:32   #61042 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 4,206
Member: 2644066
Status: Offline
Thanks Meter: 1,670
Vivo y71 reset frp done by cm2


Card found : 73CA70CC , v0137
Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.16


Operation : Reset Settings [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 425 [MSM8917]
ID_BLOCK_S : 1A334845
ID_BLOCK_L : EE2912F17CE3306E2A026E8C6857EBB8
ID_BLOCK_L : EC512BDED6DC1BAC15A2A6E7404479C3
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8917 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HAG4a2
Boot Ok!

Format USER ...
Format CACHE ...
Format Ok!
Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:18

Reconnect Power/Cable!
  Reply With Quote
Old 10-30-2019, 08:59   #61043 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 7,745
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,245
Infinity K MT6735 FRP Reset Done With King Infinnity CM2


Card found : S/N : A19EC787 , v0137
Chinese Miracle II [MTK module] v 1.58

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 460001154D32314588A70D42AB0B2FE0
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM21E
[eMMC] : FLASH_CID : 150100464531324D420DA788E02F54AB
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0xD9C8F395577720F507D8BC3DCECF37FD
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!
Clear DIN
Clear Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:39
Reconnect Power/Cable!


  Reply With Quote
Old 10-30-2019, 10:15   #61044 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 4,206
Member: 2644066
Status: Offline
Thanks Meter: 1,670
Qmobile infinity c hang on logo done by cm2


Card found: S/N : 73CA70CC , v0137
Chinese Miracle II [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Android 7.x]

Infinity SC Firmware Detected
FW Size : 3439 MiB
Load Ok!

File Info
Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand : Qmobile
Device Model : Q_Infinity_C
Device CPU : sp7731cea
Device IntName : Q_Infinity_C
Device Version : 7.0
Device Compile : 2/9/2018 2:28:02 AM
Device Project : QMobile_Q Infinity C_MP_26_01
Device ExtInfo : QMobile Q Infinity C


Operation : Flash [ v1.27 ]

======= Flash
Files set for flashing :
[ MCU ] : SC77xx Infinity Package

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 26 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!

PMTManager : Load 0x1B records
PMTManager : PMT Update Ok!
Flashing now

Update BootCode : u-boot-spl-16k.bin
Write Data ...
Write Data Ok!

Update BootCode : u-boot.bin
Erase block ...
Block erase Ok!
Write Data ...
Write Data Ok!

Write FSImage : prodnv.img
Write Data ...
Write Data Ok!

Write CodeData : sc7731C_CP0_modem.bin
Write Data ...
Write Data Ok!

Write CodeData : DSP_DM_Gx.bin
Write Data ...
Write Data Ok!

Erase Block : RuntimeData
Erase block ...
Block erase Ok!

Write CodeData : sc8830g_modem_CP2_WCN_trunk_W18.03.4_Release.bin
Write Data ...
Write Data Ok!

Write CodeData : logo_480x960.bin
Write Data ...
Write Data Ok!

Write CodeData : fblogo_480x960.bin
Write Data ...
Write Data Ok!

Write CodeData : boot.img
Write Data ...
Write Data Ok!

Write FSImage : system.img
Write Data ...
Write Data Ok!

Erase Block : PERSIST
Erase block ...
Block erase Ok!

Write CodeData : trustos.bin
Write Data ...
Write Data Ok!

Write CodeData : vmm.bin
Write Data ...
Write Data Ok!

Write CodeData : sysinfo.img
Write Data ...
Write Data Ok!

Write FSImage : cache.img
Write Data ...
Write Data Ok!

Write CodeData : recovery.img
Write Data ...
Write Data Ok!

Erase Block : MISC
Erase block ...
Block erase Ok!

Write FSImage : userdata.img
Write Data ...
Write Data Ok!


Elapsed: 00:05:34

Reconnect Power/Cable!
  Reply With Quote
Old 10-30-2019, 10:19   #61045 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 7,745
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,245
Motorolla XT1767 FRP RESET Done With king Infinity CM2


Card found : A19EC787 , v0137
Infinity-Box Android Service Tool [AST] v1.03

Operation : Moto ADB Enable [ v1.03 ]
Mode : Enable ADB
Waiting for NetInterface arrival ...

1. Power off device. Press and hold 'VOL DOWN' and 'POWER ON' buttons
2. Select by 'VOL DOWN' or 'VOL UP' FACTORY MODE , press 'POWER ON'
3. Connect USB cable, when device boot complete!

Connect Ok!

Waiting ...
Trying link with : 192.168.137.2
Connected to device!

Device : XT1767
Switching to FACTORY ...
Setting Unsecure mode
Waiting device ...
Connect Ok!

Trying link with : 192.168.137.2
Connected to device!

Device : XT1767
Setting ADB ...
Waiting device ...
Connect Ok!

Trying link with : 192.168.137.2
Connected to device!

Device : XT1767
Setting ADB ...

1. Disconnect cable from device, wait device reboot
2. Make "Reset FRP"
3. Disable "FACTORY MODE" after operations done!


Done!
Elapsed: 00:00:59

Operation : Reset FRP (ADB) [ v1.03 ]

Waiting for device in ADB mode ...

1. Connect device, enable 'DEVELOPER MODE' and 'USB DEBUG', if need!
2. Insert USB cable, accept AUTH on PhoneScreen, if software ask!

Connect Ok!

Device : perry_verizon_f
Model : Moto E (4)
FRP reset passed! Make FACTORY RESET from menu!

-- > MOTO FRP : Don't forget to DISABLE FACTORY MODE!


Done!
Elapsed: 00:00:12



  Reply With Quote
Old 10-30-2019, 11:46   #61046 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 7,745
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,245
Qmobile Z8 MT6735 FRP Reset Done With King Infinity CM2


Card found : S/N : A19EC787 , v0137
Chinese Miracle II [MTK module] v 1.58

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 520001154D42313230A0064299134EDC
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMB12
[eMMC] : FLASH_CID : 150100523231424D4206A030DC4E1399
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0xD9C8F3954B3875DC08684B0399626929
INT RAM : 0x00020000
EXT RAM : 0xC0000000 [3 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!
Clear DIN
Clear Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:52
Reconnect Power/Cable!


  Reply With Quote
Old 10-30-2019, 12:28   #61047 (permalink)
No Life Poster
 
Join Date: Mar 2008
Location: In My Shop, Bangladesh
Posts: 869
Member: 733449
Status: Offline
Sonork: 100.334100
Thanks Meter: 266
LG G3 D855 Flash Done

Infinity-Box LG Service Tool [ LGS ] v1.03

Loading firmware ...
FType : KDZ file
BB_Gen : QLM
Model : LG-D855
Version : LGD855AT-00-V30a-GLOBAL-SCA-SEP-22-2016+0
SWInfo : 6.0 user
File [0] : PrimaryGPT_0.bin
File [1] : modem_32768.bin
File [2] : sbl1_163840.bin
File [3] : dbi_165888.bin
File [4] : aboot_167936.bin
File [5] : rpm_172032.bin
File [6] : tz_174080.bin
File [7] : boot_196608.bin
File [8] : persist_229376.bin
File [9] : recovery_294912.bin
File [10] : rct_350224.bin
File [11] : laf_393216.bin
File [12] : factory_655360.bin
File [13] : system_720896.bin
File [14] : system_984136.bin
File [15] : system_1249088.bin
File [16] : system_1508424.bin
File [17] : system_1512328.bin
File [18] : system_1773376.bin
File [19] : system_2032712.bin
File [20] : system_2036616.bin
File [21] : system_2297664.bin
File [22] : system_2557000.bin
File [23] : system_2560904.bin
File [24] : system_2821952.bin
File [25] : system_3081288.bin
File [26] : system_3085192.bin
File [27] : system_3346240.bin
File [28] : system_3608384.bin
File [29] : system_3870528.bin
File [30] : system_4132672.bin
File [31] : system_4394816.bin
File [32] : system_4656960.bin
File [33] : system_4915200.bin
File [34] : system_4918264.bin
File [35] : cust_6193152.bin
File [36] : cust_6455296.bin
File [37] : cust_6459544.bin
File [38] : BackupGPT_30776320.bin

Load Ok!

Operation : Flash [ v1.03 ]
Forced Flash : Disabled
Factory Reset : Enabled

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD VOLUME UP KEY!
3. Insert USB cable, wait until Download mode screen will appear

Wait for phone...

Device not found!
Check cable, battery, connection and drivers!

Reconnect Power/Cable!

Operation : Flash [ v1.03 ]
Forced Flash : Disabled
Factory Reset : Enabled

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD VOLUME UP KEY!
3. Insert USB cable, wait until Download mode screen will appear

Wait for phone...
Connection opened successfully!
Waiting for loader ...
Handshake passed!
Collect info...
Prepare passed, mode 0x00
Boot done!

Loading firmware
Load ok!
Checking compatibility
Checking passed!
Prepare device
Prepare Passed!
Secure prepare skipped!

Start flashing device

Flash : PrimaryGPT_0.bin
Flash : modem_32768.bin
Flash : sbl1_163840.bin
Flash : dbi_165888.bin
Flash : aboot_167936.bin
Flash : rpm_172032.bin
Flash : tz_174080.bin
Flash : boot_196608.bin
Flash : persist_229376.bin
Flash : recovery_294912.bin
Flash : rct_350224.bin
Flash : laf_393216.bin
Flash : factory_655360.bin
Flash : system_720896.bin
Flash : system_984136.bin
Flash : system_1249088.bin
Flash : system_1508424.bin
Flash : system_1512328.bin
Flash : system_1773376.bin
Flash : system_2032712.bin
Flash : system_2036616.bin
Flash : system_2297664.bin
Flash : system_2557000.bin
Flash : system_2560904.bin
Flash : system_2821952.bin
Flash : system_3081288.bin
Flash : system_3085192.bin
Flash : system_3346240.bin
Flash : system_3608384.bin
Flash : system_3870528.bin
Flash : system_4132672.bin
Flash : system_4394816.bin
Flash : system_4656960.bin
Flash : system_4915200.bin
Flash : system_4918264.bin
Flash : cust_6193152.bin
Flash : cust_6455296.bin
Flash : cust_6459544.bin
Flash : BackupGPT_30776320.bin

Processing Post-Flashing tune
Flash done!

Reconnect Power/Cable!

Done!
Elapsed: 00:03:25

Reconnect Power/Cable!

Done!
Elapsed: 00:03:25
  Reply With Quote
The Following 3 Users Say Thank You to somratjisan For This Useful Post:
Show/Hide list of the thanked
Old 10-30-2019, 12:33   #61048 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 4,206
Member: 2644066
Status: Offline
Thanks Meter: 1,670
Dbeif tv d1000+ reset password done by cm2


Card found : S/N : 73CA70CC , v0137
Chinese Miracle II [MTK module] v 1.58

Operation : Reset UserCode [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 6 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : B47A020A2CA749FB026F980F7DADEAB0
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

Backup done
Read ExtData
Sorting ExtData
Sort Ok, Rebuild Ok
Restore ExtData
All done
UserCode request removed
UserCode set to default ( 0000 or 1122 )

Done!
Elapsed: 00:00:10
Reconnect Power/Cable!
  Reply With Quote
Old 10-30-2019, 13:21   #61049 (permalink)
No Life Poster
 
Join Date: Mar 2011
Location: Faisalabad
Posts: 1,154
Member: 1527968
Status: Offline
Sonork: 100.1651182
Thanks Meter: 353
MT6582__alps__BH702__BH702__4.4.2__ALPS.KK1.MP1.V2 .36

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 7001004548384542380128056BE0B375
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 8BE8H
[eMMC] : FLASH_CID : 7001004548384542380128056BE0B375
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001C8000000
[eMMC] : FLASH_UCP : 7296 MiB [eMMC 8 GiB]
DEV RID : 0x750C26B69224044D620E5B49D880BCC4
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand : alps
ProdName : BH702
ProdModel : BH702
Device : BH702
AndroidVer: 4.4.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.KK1.MP1.V2.36

[Read Ok] : preloader_hm72.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / hm72 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 526 MiB
Scatter saved to : C:\Users\alimobile\Desktop\MT6582__alps__BH702__BH 702__4.4.2__ALPS.KK1.MP1.V2.36\

All done!


Operation: Upload
File: C:\Users\alimobile\Desktop\MT6582__alps__BH702__BH 702__4.4.2__ALPS.KK1.MP1.V2.36.rar
Authentication...
Initialization...
10/30/2019: 16:31:20: Upload file 228.32 Mb
10/30/2019: 16:31:23: Uploading 228.32 Mb...
10/30/2019: 17:08:29: Finished
  Reply With Quote
The Following User Says Thank You to alimobile279 For This Useful Post:
Old 10-30-2019, 16:04   #61050 (permalink)
No Life Poster
 
Join Date: Mar 2011
Location: Faisalabad
Posts: 1,154
Member: 1527968
Status: Offline
Sonork: 100.1651182
Thanks Meter: 353
MT6572__Fly__IQ4407__Fly_IQ4407__4.2.2

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E35585A4D4201CA9AC66F31AD
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZX5
[eMMC] : FLASH_CID : 1501004E35585A4D4201CA9AC66F31AD
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0x750C26B6E80C6D8EF3CC545A69A8E0D4
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand : Fly
ProdName : Fly IQ4407
ProdModel : IQ4407
Device : Fly_IQ4407
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : 2014-04-10 19:24:20

[Read Ok] : preloader_konka72_i128_emmc.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / konka72_i128_emmc / EMMC
Android Info saved
HWConfig Info saved
FW Size : 595 MiB
Scatter saved to : C:\Users\alimobile\Desktop\MT6572__Fly__IQ4407__Fl y_IQ4407__4.2.2__2014-04-10_192420\

All done!
Operation: Upload
File: C:\Users\alimobile\Desktop\MT6572__Fly__IQ4407__Fl y_IQ4407__4.2.2__2014-04-10_192420.rar
Authentication...
Initialization...
10/30/2019: 18:00:57: Upload file 291.29 Mb
10/30/2019: 18:01:00: Uploading 291.29 Mb...
10/30/2019: 19:21:53: Finished
  Reply With Quote
The Following User Says Thank You to alimobile279 For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 17:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 11:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 09:03
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 20:17

 



All times are GMT +1. The time now is 10:39.



Powered by Searchlight © 2021 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.59307 seconds with 9 queries

SEO by vBSEO