GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 12-14-2019, 09:21   #61591 (permalink)
No Life Poster
 
Join Date: Oct 2011
Location: Nigeria
Posts: 6,590
Member: 1677653
Status: Offline
Thanks Meter: 2,769
Itel a33 frp reset done


Card found : A6936825 , v0138
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.03

Load IDBase v10107 Ok!


Operation : Identify [ v2.03 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : OPM2.171019.012
Display ID : W5504-F3103-8.1-OP-V032-20190418
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2019-04-01
Build Time : 1555584446
Product Model : itel W5504
Product Brand : Itel
Product Name : F3103
Product Device : itel-W5504
Product Manfct : itel
Product Info : F3103
Product Board : itel-W5504
Board Platform : sp7731e
Display ID : W5504-F3103-8.1-OP-V032-20190418

Update DataBase ...


SecInfo :
IMEI[1] : XXXXXXXXXXXXXXX
IMEI[2] : XXXXXXXXXXXXXXX
IMEI[3] : XXXXXXXXXXXXXXX
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF

Platform Version: MOCORTM_17C_W18.31.2_P13_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.31.2_P13
HW Version: sc7731e_modem
CMP_Time : 04-14-2019 16:53:52

MODEM TAG : MOCORTM_17C_W18.31.2_P13_Debug_FM_BASE_17C_W18.31. 2_P13_sc7731e_modem_pike2_pub

UserData : STATE : PLAIN


Done!
Elapsed: 00:01:33

Operation : Format FS / Reset Settings [ v2.03 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : FRP

Reconnect Power/Cable!


Done!
Elapsed: 00:00:27
  Reply With Quote
Old 12-14-2019, 09:23   #61592 (permalink)
No Life Poster
 
Join Date: Oct 2011
Location: Nigeria
Posts: 6,590
Member: 1677653
Status: Offline
Thanks Meter: 2,769
itel it2150 format done

SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]

Operation : Identify [ v1.05 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v2.0 (c)2019
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

IMEI[1] : 356506098595727
IMEI[2] : 356506098595735

Done!
Elapsed: 00:00:15

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.05 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v2.0 (c)2019
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_126 D05117D9B_NVM.nv

Executing FormatFFS ...
Format FFS Done!

Done!
Elapsed: 00:00:14

Reconnect Power/Cable!
  Reply With Quote
Old 12-14-2019, 11:05   #61593 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 8,670
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,368
Motorolla XT1254 QLM FRP Reset Done With King Infinity CM2


Card found : A19EC787 , v0138
Infinity-Box Android Service Tool [AST] v1.03

Operation : Moto ADB Enable [ v1.03 ]
Mode : Enable ADB
Waiting for NetInterface arrival ...

1. Power off device. Press and hold 'VOL DOWN' and 'POWER ON' buttons
2. Select by 'VOL DOWN' or 'VOL UP' FACTORY MODE , press 'POWER ON'
3. Connect USB cable, when device boot complete!

Connect Ok!

Waiting ...
Trying link with : 192.168.137.2
Connected to device!

Device : iled to get property ro.boot.hardware.sku, err = 0, status = 1; Property ro.boot.hardware.sku not
Switching to FACTORY ...
Setting Unsecure mode
Waiting device ...
Connect Ok!

Trying link with : 192.168.137.2
Connected to device!

Device : iled to get property ro.boot.hardware.sku, err = 0, status = 1; Property ro.boot.hardware.sku not
Setting ADB ...
Waiting device ...
Connect Ok!

Trying link with : 192.168.137.2
Connected to device!

Device : iled to get property ro.boot.hardware.sku, err = 0, status = 1; Property ro.boot.hardware.sku not
Setting ADB ...

1. Disconnect cable from device, wait device reboot
2. Make "Reset FRP"
3. Disable "FACTORY MODE" after operations done!


Done!
Elapsed: 00:00:32

Operation : Reset FRP (ADB) [ v1.03 ]

Waiting for device in ADB mode ...

1. Connect device, enable 'DEVELOPER MODE' and 'USB DEBUG', if need!
2. Insert USB cable, accept AUTH on PhoneScreen, if software ask!

Connect Ok!

Device : quark_verizon
Model : XT1254
FRP reset passed! Make FACTORY RESET from menu!

-- > MOTO FRP : Don't forget to DISABLE FACTORY MODE!


Done!
Elapsed: 00:00:13



  Reply With Quote
Old 12-14-2019, 11:09   #61594 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 8,670
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,368
Huawei Y560-U02 SPD Pattren Reset Done With King Infinity CM2


Card found: S/N : A19EC787 , v0138
Chinese Miracle II [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Generic 4.x-5.0]

Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 35 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x0000000166600000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Done!

Elapsed: 00:00:21

Reconnect Power/Cable!


  Reply With Quote
Old 12-14-2019, 11:28   #61595 (permalink)
No Life Poster
 
Tanha0321's Avatar
 
Join Date: Jul 2006
Location: Pakistan karachi
Posts: 9,737
Member: 314003
Status: Offline
Thanks Meter: 2,999
G Five Spark Dead Recaver

Code:
Operation : Format FileSystem [ v1.04 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_196A2464A0C9_NVM.nv

Executing FormatFFS ... 
Format FFS Done!

Done!
Elapsed: 00:00:24

Reconnect Power/Cable!
  Reply With Quote
Old 12-14-2019, 16:00   #61596 (permalink)
Freak Poster
 
julius84's Avatar
 
Join Date: Jan 2016
Location: Zimbabwe
Posts: 241
Member: 2524486
Status: Offline
Thanks Meter: 112
Donate money to this user
Mobicel Ultra Firmware Read Done by Infinity Spd2

Code:
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!

Device info : 
Patch Level    : OPM2.171019.012
Display ID     : OPM2.171019.012 release-keys
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2019-05-05
Build Time     : 1558585819
Product Info   : k101
Product Model  : ULTRA
Product Brand  : Mobicel
Product Name   : ULTRA
Product Device : ULTRA
Product Manfct : Mobicel
Product Board  : k101
Board Platform : sp7731e

VlnrLevel : 0x02

SP7731E__Mobicel__ULTRA__8.1.0__OPM2.171019.012__k101

Read : u-boot.bin
Read : sml.bin
Read : tos.bin
Read : vbmeta.img
Read : deltanv_w.bin
Read : pm_sys.bin
Read : modem_w.bin
Read : gdsp_w.bin
Read : nvitem_w.bin
Read : modem_wcn.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Make : persist.img
Read : phase.cfg
Read : boot.img
Read : recovery.img
Read : system.img
ExtSparse : Compression ratio : 82%
Read : vendor.img
ExtSparse : Compression ratio : 47%
Make : userdata.img
Make : cache.img
Read : prodnv.img
ExtSparse : Compression ratio : 20%
Read : u-boot-spl.bin

Waiting for device ... 
ADB : Device found!
ADB : Connected!
ADB : Prepare Ok!
Winter is coming!
In search of truth ...
Cookies!

Firmware size : 0x579FBBFC ( 1.37 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!


Done!
Elapsed: 00:41:50
  Reply With Quote
The Following User Says Thank You to julius84 For This Useful Post:
Old 12-14-2019, 18:10   #61597 (permalink)
Junior Member
 
Join Date: Dec 2017
Location: Bangladesh
Posts: 36
Member: 2788489
Status: Offline
Sonork: 1000000.1000
Thanks Meter: 36
Walton Primo EM2 1Click Frp Lock Remove By CM2

http://www.youtube.com/watch?v=KjktWXXynps
Walton Primo EM2 Frp Unlock Remove
  Reply With Quote
The Following 2 Users Say Thank You to kg tel For This Useful Post:
Old 12-15-2019, 07:50   #61598 (permalink)
Product Manager
 
>>Gsmmilon>>'s Avatar
 
Join Date: Mar 2014
Location: Bangladesh
Age: 30
Posts: 2,164
Member: 2142580
Status: Offline
Sonork: N/A
Thanks Meter: 1,211
Donate money to this user
Hisense U605 SC7731E Android 8.1 Firmware Read Done

Boot Done!

Device info :
Patch Level : OPM2.171019.012
Display ID : Hisense_U605_00_S03_20190701
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2019-05-05
Build Time : 1561954216
Product Model : Hisense U605
Product Brand : Hisense
Product Name : U605
Product Device : HS7731ESP
Product Board : Hisense_U605
Product Manfct : Hisense
Product Info : sp7731e_fs280
Product Board : sp7731e_fs280
Board Platform : sp7731e

VlnrLevel : 0x00

SP7731E__Hisense__Hisense_U605__8.1.0__Hisense_U60 5_00_S03_20190701__OPM2.171019.012__sp7731e_fs280

Read : prodnv.img
ExtSparse : Compression ratio : 37%
Read : phase.cfg
Read : recovery.img
Read : tos.bin
Read : sml.bin
Read : u-boot.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : nvitem_w.bin
Make : persist.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : modem_wcn.img
Read : modem_w.bin
Read : deltanv_w.bin
Read : gdsp_w.bin
Read : pm_sys.bin
Read : boot.img
Read : system.img
ExtSparse : Compression ratio : 88%
Make : cache.img
Read : vendor.img
ExtSparse : Compression ratio : 71%
Read : vbmeta.img
Read : fbootlogo3.bin
Read : fbootlogo4.bin
Read : fbootlogo5.bin
Read : customerdata.bin
ExtSparse : Compression ratio : 2%
Read : udc_config.bin
Make : userdata.img
Read : u-boot-spl.bin

Firmware size : 0x6300CC60 ( 1.55 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!


Done!
Elapsed: 00:29:31
  Reply With Quote
The Following User Says Thank You to >>Gsmmilon>> For This Useful Post:
Old 12-15-2019, 11:23   #61599 (permalink)
No Life Poster
 
Tanha0321's Avatar
 
Join Date: Jul 2006
Location: Pakistan karachi
Posts: 9,737
Member: 314003
Status: Offline
Thanks Meter: 2,999
Voice X840 Dead Recaver

Code:
Operation : Format FileSystem [ v1.04 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_1B80D3BFB6DE_NVM.nv

Executing FormatFFS ... 
Format FFS Done!

Done!
Elapsed: 00:00:25

Reconnect Power/Cable!
  Reply With Quote
Old 12-15-2019, 11:28   #61600 (permalink)
Freak Poster
 
Join Date: Feb 2018
Location: bahawalpur
Posts: 155
Member: 2809413
Status: Offline
Sonork: CharlesMaind
Thanks Meter: 26
Donate money to this user
QMobile X700PRO Lite flash file read by cm2

QMobile X700PRO Lite flash file 100% Tested File Downloads Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 24 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4838473165050755E5161B9385
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A4838473165050755E5161B9385
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0xB6FEA66F81A87A5DC00226DBC2104205
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : QMobile
ProdName : X700_PRO_Lite
ProdModel : QMobile X700 PRO Lite
Device : X700_PRO_Lite
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : ALPS.W10.24.p0

[Read Ok] : preloader_v2600.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / v2600 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2712 MiB
Scatter saved to : C:\Users\BASIT NAZZEER\Desktop\MT6580__QMobile__QMobile_X700_PRO_ Lite__X700_PRO_Lite__6.0__ALPS.W10.24.p0\

All done!

Done!
Elapsed: 00:12:15
Reconnect Power/Cable!


link to password protected file removed

Last edited by InfinityHelp; 12-15-2019 at 12:03. Reason: link to password protected file removed
  Reply With Quote
Old 12-15-2019, 11:32   #61601 (permalink)
Freak Poster
 
Join Date: Feb 2018
Location: bahawalpur
Posts: 155
Member: 2809413
Status: Offline
Sonork: CharlesMaind
Thanks Meter: 26
Donate money to this user
QMobile X700 PRO II flash file read by cm2

QMobile X700 PRO II flash file 100% Tested File Downloads




MT6580__QMobile__QMobile_X700_PRO_II__X700_PRO_II_ _6.0__alps-mp-m0.mp1-V2.34_tinno6580.we.m_P290



Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 18 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A484147346132A5CEAA099CC4C5
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , 2a4GA
[eMMC] : FLASH_CID : 90014A484147346132A5CEAA099CC4C5
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
DEV RID : 0xB6FEA66FBE78766E8DD95225AA30B96E
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : QMobile
ProdName : X700_PRO_II
ProdModel : QMobile X700 PRO II
Device : X700_PRO_II
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-m0.mp1-V2.34_tinno6580.we.m_P290

[Read Ok] : preloader_v2600.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / v2600 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2735 MiB
Scatter saved to : C:\Users\BASIT NAZZEER\Desktop\MT6580__QMobile__QMobile_X700_PRO_ II__X700_PRO_II__6.0__alps-mp-m0.mp1-V2.34_tinno6580.we.m_P290\

All done!

Done!
Elapsed: 00:12:25
Reconnect Power/Cable!

link to password protected file removed

Last edited by InfinityHelp; 12-15-2019 at 12:03. Reason: link to password protected file removed
  Reply With Quote
Old 12-15-2019, 12:59   #61602 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 8,670
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,368
Qmobile I6 Metal 1 SPD77xx Logo Stuck Fix By Flashing With King Infinity CM2


Card found: S/N : A19EC787 , v0138
Chinese Miracle II [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Android 6.x]

Infinity SC Firmware Detected
FW Size : 2874 MiB
Load Ok!

File Info
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : QMobile
Device Model : i6_Metal_ONE_new
Device CPU : i6_Metal_ONE
Device IntName : i6_Metal_ONE
Device Version : 6.0
Device Compile : 12/15/2016 10:31:38 AM
Device Project : MRA58K release-keys
Device ExtInfo : QMobile i6 Metal ONE


Operation : Flash [ v1.27 ]

======= Flash
Files set for flashing :
[ MCU ] : SC77xx Infinity Package

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 35 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!

PMTManager : Load 0x19 records
PMTManager : PMT Update Ok!
Flashing now

Update BootCode : u-boot-spl-16k.bin
Write Data ...
Write Data Ok!

Update BootCode : u-boot.bin
Erase block ...
Block erase Ok!
Write Data ...
Write Data Ok!

Write FSImage : prodnv.img
Write Data ...
Write Data Ok!

Write CodeData : sc7731C_CP0_modem.bin
Write Data ...
Write Data Ok!

Write CodeData : DSP_DM_Gx.bin
Write Data ...
Write Data Ok!

Erase Block : RuntimeData
Erase block ...
Block erase Ok!

Write CodeData : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
Write Data ...
Write Data Ok!

Erase Block : RuntimeData
Erase block ...
Block erase Ok!

Write CodeData : logo_480x854.bin
Write Data ...
Write Data Ok!

Write CodeData : fblogo_480x854.bin
Write Data ...
Write Data Ok!

Write CodeData : boot.img
Write Data ...
Write Data Ok!

Write FSImage : system.img
Write Data ...
Write Data Ok!

Erase Block : PERSIST
Erase block ...
Block erase Ok!

Write CodeData : sysinfo.img
Write Data ...
Write Data Ok!

Write FSImage : cache.img
Write Data ...
Write Data Ok!

Write CodeData : recovery.img
Write Data ...
Write Data Ok!

Erase Block : MISC
Erase block ...
Block erase Ok!

Write FSImage : userdata.img
Write Data ...
Write Data Ok!


Elapsed: 00:14:05

Reconnect Power/Cable!


  Reply With Quote
Old 12-16-2019, 05:58   #61603 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,775
Member: 2644066
Status: Offline
Thanks Meter: 1,772
Vgo tel i10 classic reset password done by cm2


Card found : 73CA70CC , v0137
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.04

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]


SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]

Operation : Identify [ v1.04 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v1.1 (c)2019
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

IMEI[1] :
IMEI[2] :

Done!
Elapsed: 00:00:16

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.04 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v1.1 (c)2019
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_0D8 A03976690_NVM.nv

Executing FormatFFS ...
Format FFS Done!

Done!
Elapsed: 00:00:19

Reconnect Power/Cable!
  Reply With Quote
Old 12-16-2019, 08:04   #61604 (permalink)
No Life Poster
 
Manikanika81's Avatar
 
Join Date: Feb 2019
Location: Madagascar
Posts: 573
Member: 2897012
Status: Offline
Thanks Meter: 400
Itel it5601 read user code done

SPRD mode : SC6531 : REV : C000 : NOR : [ 4MB-8MB ]

Operation : Read UserCode [ v1.05 ]

MODE : From Device
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Spreadtrum Boot Block version 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Reading data ...
Sorting data ...
STATE : ACTIVE : CODE : 2019

Done!
Elapsed: 00:00:40
  Reply With Quote
Old 12-16-2019, 08:20   #61605 (permalink)
No Life Poster
 
kothamamun's Avatar
 
Join Date: Apr 2016
Location: B A N G L A D E S H
Posts: 3,171
Member: 2556542
Status: Offline
Thanks Meter: 1,776
redmi 5 plus firmware backup done

Code:
Operation : Read Flash [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
ID_BLOCK_I : SnapDragon 625 [MSM8953]
ID_BLOCK_S : C575D1A6
ID_BLOCK_L : B8E16240ECFB2D70015BE5A034A65679
ID_BLOCK_L : 3FB9B312A5F49E4C0B9237324DB96558
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ] 
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x45 , VENDOR : SANDISK , NAME : DL2032
Boot Ok!


Brand     : xiaomi
ProdName  : vince
ProdModel : Redmi 5 Plus
Device    : vince
AndroidVer: 8.1.0
Manufact. : Xiaomi
QLMxCPU   : MSM8953

DevInfo : MSM8953__Xiaomi__xiaomi__ANDR_v8.1.0__Redmi_5_Plus__vince__vince

Reading Flash Content ... 
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : devcfg.mbn
[Read Ok] : adspso.bin
[Read Ok] : ddr.bin
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : splash.img
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : mdtp.img
[Read Ok] : lksecapp.mbn
[Read Ok] : cmnlib.mbn
[Read Ok] : cmnlib64.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : ap.mbn
[Read Ok] : msap.mbn
[Read Ok] : cust.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8953 / eMMC
Firmware Size : 3815 MiB

Done!
Elapsed: 00:05:26

Reconnect Power/Cable!
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 17:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 11:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 09:03
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 20:17

 



All times are GMT +1. The time now is 20:12.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.75465 seconds with 10 queries

SEO by vBSEO