GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 06-10-2021, 07:58   #66826 (permalink)
No Life Poster
 
umarnlw's Avatar
 
Join Date: Dec 2005
Location: Narowal
Posts: 3,229
Member: 207708
Status: Offline
Sonork: 100.1602241
Thanks Meter: 915
Infinix Hot 10 FRP Reset | Infinix X682B PIN Code | Infinix Factory Reset By CM2MT2


Infinix Hot 10 FRP Reset | Infinix X682B PIN Code | Infinix Factory Reset By CM2MT2

Here are logs

Its a MRK base phone.
All operation done in flash mode.



Youtube Link

https://www.youtube.com/watch?v=781OOxsd57E
  Reply With Quote
The Following User Says Thank You to umarnlw For This Useful Post:
Old 06-10-2021, 10:31   #66827 (permalink)
Freak Poster
 
Join Date: Feb 2018
Location: Congo Brazzaville
Posts: 266
Member: 2809120
Status: Offline
Thanks Meter: 69
hi

Itel A36 successfully remove FRP

Card found : 21B1154E , v0148
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.12

Load IDBase v8331 Ok!


Operation : Format FS / Reset Settings [ v2.12 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!

Boot Done!

Wipe Ok : FRP

Reconnect Power/Cable!

Done!
Elapsed: 00:00:29
  Reply With Quote
The Following User Says Thank You to leroi2018 For This Useful Post:
Old 06-10-2021, 13:23   #66828 (permalink)
Insane Poster
 
Join Date: Feb 2018
Location: UZB
Posts: 85
Member: 2808071
Status: Offline
Sonork: none
Thanks Meter: 82
BQ-6035L Imei Repair Done Just One Click

Read Info

Quote:
Operation : Identify [ v2.12 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : BQ-6035L_V08_201907032206.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0004
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : PPR1.180610.011
Display ID : PPR1.180610.011 release-keys
Ver. Incmt : 1562162649
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2019-06-05
Build Time : 03.07.2019
Product Model : BQ-6035L
Product Brand : BQru
Product Name : BQru-6035L
Product Device : BQru-6035L
Product Manfct : BQru
Product Info : BQru-6035L
Product Board : BQru-6035L
Board Platform : sp9863a


Platform Version: MOCORTM_18B_W19.10.2_P8_Debug
Project Version: sharkl3_pub
BASE Version: FM_BASE_18B_W19.10.2_P8
HW Version: sc9863A_modem
CMP_Time : 05-11-2019 15:24:10

MODEM TAG : MOCORTM_18B_W19.10.2_P8_Debug_FM_BASE_18B_W19.10.2 _P8_sc9863A_modem_sharkl3_pub

USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)

- > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:01:23
Repair Secerity

Quote:
Operation : Repair Security [ v2.12 ]

BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : BQ-6035L_V08_201907032206.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0004
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : Control transfered!

Boot Done!

NVMng : SecurityInfo
IMEI[1] : 35743410010****
IMEI[2] : 35743410010****
IMEI[3] : 86740002031****

SEC : SLS:0, SKS:0, SKV:4


New SecInfo :
IMEI[1] : 35491910038****
IMEI[2] : 35491910038****

NVMng : Item updated!
NVMng : Post-Process Ok!


Done!
Elapsed: 00:00:20
  Reply With Quote
The Following 2 Users Say Thank You to Mardanov.T For This Useful Post:
Old 06-10-2021, 13:26   #66829 (permalink)
Insane Poster
 
Join Date: Feb 2018
Location: UZB
Posts: 85
Member: 2808071
Status: Offline
Sonork: none
Thanks Meter: 82
Itel L6005 Imei Repair Done World 1st

Read Info

Quote:
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.11

Load IDBase v8331 Ok!


VER : BP_R1.0.0
LEN : FF2C289F ( 3,99 GiB )
CPU : s9863a1h10
VER : L6005-F6308RU-9.0-RU-V015-20200113_1520-user

Operation : Identify [ v2.11 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : L6005-F6308RU-9.0-RU-V015-20200113_1520_user.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0006
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : PPR1.180610.011
Display ID : L6005-F6308RU-9.0-RU-V018-20200728
Ver. Incmt : RU-V018-20200728
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2020-07-05
Build Time : 28.07.2020
Product Model : itel L6005
Product Brand : Itel
Product Name : F6308RU
Product Device : itel-L6005
Product Manfct : itel
Product Info : L6005
Product Board : L6005
Board Platform : sp9863a
Product Name : L6005
Product Device : L6005


Platform Version: MOCORTM_18B_ITEL_W19.28.5_P10_Debug
Project Version: sharkl3_pub
BASE Version: FM_BASE_18B_ITEL_W19.28.5_P10
HW Version: sc9863A_modem
CMP_Time : 04-08-2020 18:13:00

MODEM TAG : MOCORTM_18B_ITEL_W19.28.5_P10_Debug_FM_BASE_18B_IT EL_W19.28.5_P10_sc9863A_modem_sharkl3_pub

USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)

- > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:01:56
Repair Secerity

Quote:
Operation : Repair Security [ v2.11 ]

BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : L6005-F6308RU-9.0-RU-V015-20200113_1520_user.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0006
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
ProtoEx : Fail to enable Forced FlashWrite!
FDL : Control transfered!

Boot Done!

NVMng : SecurityInfo
IMEI[1] : 35410211562****
IMEI[2] : 35410211562****
IMEI[3] : 86740002031****

SEC : SLS:0, SKS:0, SKV:4


New SecInfo :
IMEI[2] : 35989108194****

NVMng : Item updated!
NVMng : Post-Process Ok!


Done!
Elapsed: 00:00:36
  Reply With Quote
The Following 2 Users Say Thank You to Mardanov.T For This Useful Post:
Old 06-10-2021, 18:56   #66830 (permalink)
Freak Poster
 
Join Date: Oct 2005
Location: AsTeknik Elektronik
Posts: 441
Member: 194874
Status: Offline
Thanks Meter: 371
Infinix X687 (Zero 8) [UNBRICK & IMEI REPAIR]






FLASH
-------

Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.21

Load IDBase v21168 Ok!


Preloader [HW DEV] Info :
EMI : DEV : MT6752
EMI : SRC : preloader_x687_h851.bin
EMI : CNT : 0007
EMI : [00] : eUFS : LP_DDR4X : DEV : H9HQ16AECMMDAR : RAM : [ 6,00 GB ]
EMI : [01] : eUFS : LP_DDR4X : DEV : KM8V7001JA-B813 : RAM : [ 8,00 GB ]
EMI : [02] : eMMC : LP_DDR4X : ID : 90014A684445615033 : VEN : HYNIX | DEV : hDEaP3 : RAM : [ 6,00 GB ]
EMI : [03] : eUFS : LP_DDR4X : DEV : H9HQ15AFAMADAR : RAM : [ 8,00 GB ]
EMI : [04] : eUFS : LP_DDR4X : DEV : KM8V8001JM-B813 : RAM : [ 8,00 GB ]
EMI : [05] : eUFS : LP_DDR4X : DEV : KM8F8001JM-B813 : RAM : [ 8,00 GB ]
EMI : [06] : eUFS : LP_DDR4X : DEV : H9HQ21AFAMZDAR : RAM : [ 8,00 GB ]

Operation : Write Flash [ v2.21 ]

Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Disabled
Safe UserData : Disabled
Flash Format : Disabled

Files :26
[FL] : Set : preloader_x687_h851.bin
[FL] : Set : tkv.img
[FL] : Set : recovery.img
[FL] : Set : md1img.img
[FL] : Set : spmfw.img
[FL] : Set : scp.img
[FL] : Set : scp.img
[FL] : Set : sspm.img
[FL] : Set : sspm.img
[FL] : Set : cam_vpu1.img
[FL] : Set : cam_vpu2.img
[FL] : Set : cam_vpu3.img
[FL] : Set : lk.img
[FL] : Set : lk.img
[FL] : Set : boot.img
[FL] : Set : logo.bin
[FL] : Set : dtbo.img
[FL] : Set : tee.img
[FL] : Set : tee.img
[FL] : Set : vbmeta.img
[FL] : Set : vbmeta_system.img
[FL] : Set : vbmeta_vendor.img
[FL] : Set : super.img
[FL] : Set : cache.img
[FL] : Set : tranfs.img
[FL] : Set : userdata.img

[FL] : Total size : 0x12BC8A654 [ 4,68 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6785 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Krug
TYPE : MODERN RAPHAEL
BROM : MEID : 83B7F0F37B8A1CC2B3C1A222FDA25A5B
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : D1DAF8B0B8699CD3425F0A1CC4023728DE1B333615715D9A7A EB3D958E1D70CA
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6785
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6752
EMI : SRC : preloader_x687_h851.bin
EMI : CNT : 0007
EMI : [00] : eUFS : LP_DDR4X : DEV : H9HQ16AECMMDAR : RAM : [ 6,00 GB ]
EMI : [01] : eUFS : LP_DDR4X : DEV : KM8V7001JA-B813 : RAM : [ 8,00 GB ]
EMI : [02] : eMMC : LP_DDR4X : ID : 90014A684445615033 : VEN : HYNIX | DEV : hDEaP3 : RAM : [ 6,00 GB ]
EMI : [03] : eUFS : LP_DDR4X : DEV : H9HQ15AFAMADAR : RAM : [ 8,00 GB ]
EMI : [04] : eUFS : LP_DDR4X : DEV : KM8V8001JM-B813 : RAM : [ 8,00 GB ]
EMI : [05] : eUFS : LP_DDR4X : DEV : KM8F8001JM-B813 : RAM : [ 8,00 GB ]
EMI : [06] : eUFS : LP_DDR4X : DEV : H9HQ21AFAMZDAR : RAM : [ 8,00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00080000 [ 512,00 KB ]
DRAM: 0x200000000 [ 8,00 GB ]

UFS: AD014839485131354146414D41444152
UFS:
VEN : 0x01AD
VID : H9HQ15AFAMADAR
IFW : A102
LU0 : 0x00400000 [ 4,00 MB ]
LU1 : 0x00400000 [ 4,00 MB ]
LU2 : 0x1DCB000000 [ 119,17 GB ]
FSN : 1d04f6a0c185000000000000
REG : 0x101010000

CHIP : MT6785 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 937BDE78605B112F06EBAC4BD2B786

DA : USB : HIGH-SPEED

Boot done!

[FL] : COMBO scatter! Update settings to UFS
[FL] : Set : preloader_x687_h851.bin
[FL] : Set : tkv.img
[FL] : Set : recovery.img
[FL] : Set : md1img.img
[FL] : Set : spmfw.img
[FL] : Set : scp.img
[FL] : Set : scp.img
[FL] : Set : sspm.img
[FL] : Set : sspm.img
[FL] : Set : cam_vpu1.img
[FL] : Set : cam_vpu2.img
[FL] : Set : cam_vpu3.img
[FL] : Set : lk.img
[FL] : Set : lk.img
[FL] : Set : boot.img
[FL] : Set : logo.bin
[FL] : Set : dtbo.img
[FL] : Set : tee.img
[FL] : Set : tee.img
[FL] : Set : vbmeta.img
[FL] : Set : vbmeta_system.img
[FL] : Set : vbmeta_vendor.img
[FL] : Set : super.img
[FL] : Set : cache.img
[FL] : Set : tranfs.img
[FL] : Set : userdata.img

[FL] : HW verification passed!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : Pre-Erase
Erase : 0x0000000000000000 : 0x0000000001A08000
Erase : 0x0000000001D08000 : 0x0000000006D9A000
Erase : 0x000000000AAA2000 : 0x0000000004000000
Erase : 0x0000000012800000 : 0x0000000003000000
Erase : 0x0000000016000000 : 0x0000000000A00000
Erase : 0x000000001AA00000 : 0x0000000237600000

[FL] : RePartition
[FL] : RePartition Ok!


[FL] : Flashing now ...

Write : PRELOADER
Update bootloader backup copy ...
Update bootloader backup copy Ok!
Write : TKV
FAIL : SEC : IMG TYPE MISMATCH
Write : RECOVERY
Write : MD1IMG
Write : SPMFW
Write : SCP1
Write : SCP2
Write : SSPM_1
Write : SSPM_2
Write : CAM_VPU1
Write : CAM_VPU2
Write : CAM_VPU3
Write : LK
Write : LK2
Write : BOOT
Write : LOGO
Write : DTBO
Write : TEE1
Write : TEE2
Write : VBMETA
Write : VBMETA_SYSTEM
Write : VBMETA_VENDOR
Write : SUPER
Write : CACHE
Write : TRANFS
FAIL : SEC : IMG TYPE MISMATCH
Write : USERDATA

Ultra : Ok!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : RePartition
[FL] : RePartition Ok!

[FL] : Flashing finished!

Done!
Elapsed: 00:02:57

Reconnect Power/Cable!






IMEI REPAIR

------------

Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.21

Load IDBase v21168 Ok!


Operation : Repair Security [ v2.21 ]
Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6785 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : MEID : 83B7F0F37B8A1CC2B3C1A222FDA25A5B
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BOOTROM
BROM : LOG : F0: 102B 0000 F3: 1001 0000 [0200] F3: 1001 0000 F7: 0000 0000 V0: 0000 0000 [0001]
BROM : SOCID : D1DAF8B0B8699CD3425F0A1CC4023728DE1B333615715D9A7A EB3D958E1D70CA
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : Configuring target for META

BROM : META configured!

INIT : META confirmed!

Boot done!

AP_CHIP : MT6785
AP_SWTM : Thu Jun 11 06:33:22 CST 2020
AP_SWVR : alps-mp-q0.mp1-V9.77
MD_CHIP : MT6785
MD_SWTM : 2000.00.00
MD_DSPV : 1.0
MD_DSPP : MOLY.LR13.R1.MP.V58.12.P1
MD_SWVR : TK_MD_HW
MD_HWVR : Unknown

IMEI[0] : 355XX
IMEI[1] : 359XX

IMEI[0] : 351XX
Item : update Ok!
IMEI[1] : 351XX
Item : update Ok!

Done!
Elapsed: 00:00:55

Reconnect Power/Cable!
  Reply With Quote
The Following 3 Users Say Thank You to WhyLeR For This Useful Post:
Show/Hide list of the thanked
Old 06-10-2021, 19:04   #66831 (permalink)
Freak Poster
 
Join Date: Oct 2005
Location: AsTeknik Elektronik
Posts: 441
Member: 194874
Status: Offline
Thanks Meter: 371
Xiaomi Redmi 9 Indian (M2006C3MII)(Cattail) [IMEI REPAIR]





DIRECT IMEI REPAIR (BL LOCKED)

-----------

1 - Repair Baseband
2 - Modem Init
3 - Repair Security






Operation : Repair Security [ v2.21 ]
Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : MEID : 122EC461518A4F82964A70CB68F6A7B4
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BOOTROM
BROM : LOG : F0: 102B 0000 F3: 0000 0000 [0200] V0: 0000 0000 [0001]
BROM : SOCID : 8E048EB973A695F6D873A6B28E90EAE2095FC05C44BBB8D7E5 3AAA76FF600C6C
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : Configuring target for META

BROM : META configured!

INIT : META confirmed!

Boot done!

AP_CHIP : MT6765
AP_SWTM : Tue Dec 22 09:11:08 CST 2020
AP_SWVR : alps-mp-q0.mp1.tc8sp3-V1.4_lcsh.q0mp1.k62v1.64.bsp_P50
MD_CHIP : MT6765
MD_SWTM : 2000.00.00
MD_DSPV : 1.0
MD_DSPP : MOLY.LR12A.R3.MP.V107.5.P75
MD_SWVR : LCSH_Q0MP1_MT6765_SP_HW
MD_HWVR : Unknown

IMEI[0] : [ ERASED ]
IMEI[1] : [ ERASED ]

IMEI[1] : 351XX
Item : update Ok!

Done!
Elapsed: 00:01:05

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to WhyLeR For This Useful Post:
Old 06-10-2021, 19:55   #66832 (permalink)
Freak Poster
 
Join Date: Oct 2005
Location: AsTeknik Elektronik
Posts: 441
Member: 194874
Status: Offline
Thanks Meter: 371
Xiaomi Redmi 9 (M2004J19G-C-AG-AC)(Lancelot) [IMEI REPAIR]





It has 4 different models. There are 2 types of engineering firmware.

All tested and repaired successfully.



AG-AC models may not boot after stock rom. The solution is to open the BL.


M2004J19G - Global
M2004J19C - China
M2004J19AG - Global
M2004J19AC - China


IMEI REPAIR WITH ENG ROM (BL LOCKED) (G-C)
-------------------------------------------------

1 - Flash Eng Firmware
2 - Repair Baseband
3 - Repair Security
4 - Flash Stock Rom



IMEI REPAIR WITH ENG ROM (BL LOCKED) (AG-AC)
-------------------------------------------------

1 - Flash Eng Firmware
2 - Repair Baseband
3 - Repair Security
4 - Flash Stock Rom
5 - BL Unlock (Chimera Tool) (This Mui Cant Be ..)




IMEI REPAIR (CHINA)
------------------------

INIT : META confirmed!

Boot done!

AP_CHIP : MT6768
AP_SWTM : Tue Jun 23 16:00:24 CST 2020
AP_DSPP : lancelotcn
AP_SWVR : alps-mp-q0.mp1.tc8sp2-V1.9.1_huaqin.q0mp1.k69v1.64_P17
MD_CHIP : MT6768
MD_SWTM : 2000.00.00
MD_DSPV : 1.0
MD_DSPP : MOLY.LR12A.R3.MP.V98.P16
MD_SWVR : HUAQIN_Q0MP1_MT6769_SP_HW
MD_HWVR : Unknown

IMEI[0] : [ ERASED ]
IMEI[1] : [ ERASED ]

IMEI[1] : 356XX
Item : update Ok!

Done!
Elapsed: 00:00:43

Reconnect Power/Cable!


IMEI REPAIR (GLOBAL)
----------------------


INIT : META confirmed!

Boot done!

AP_CHIP : MT6768
AP_SWTM : Tue Jun 23 16:00:24 CST 2020
AP_DSPP : lancelotgl
AP_SWVR : alps-mp-q0.mp1.tc8sp2-V1.9.1_huaqin.q0mp1.k69v1.64_P17
MD_CHIP : MT6768
MD_SWTM : 2000.00.00
MD_DSPV : 1.0
MD_DSPP : MOLY.LR12A.R3.MP.V98.P16
MD_SWVR : HUAQIN_Q0MP1_MT6769_SP_HW
MD_HWVR : Unknown

IMEI[0] : [ ERASED ]
IMEI[1] : [ ERASED ]

IMEI[1] : 356XX
Item : update Ok!


Done!
Elapsed: 00:00:40

Reconnect Power/Cable!



  Reply With Quote
The Following User Says Thank You to WhyLeR For This Useful Post:
Old 06-11-2021, 07:46   #66833 (permalink)
Freak Poster
 
jddj's Avatar
 
Join Date: Jul 2008
Location: Pakistan
Posts: 120
Member: 826534
Status: Offline
Sonork: 100.1660561
Thanks Meter: 30
Thumbs up Telenor infinity k2 identify and sp unlock

Operation : Identify [ v2.24 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM4)
MODE : PRELOADER PORT
PORT : 4
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0xFF|0x01
BROM : PRELOADER PORT
MODE : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6735
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 150100464531324D42076D57D09124A5
DAInf: 4 : 2 : 155
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

EMMC: 150100464531324D42076D57D09124A5
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FE12MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3A3E00000 [ 14.56 GB ]

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]

CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : EEEA03C6D693536E4E3B7B9AD3BEE83

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level : NRD90M
Display ID : telenor_Infinity_k2_V007
Ver. CodeName : REL
Ver. Release : 7.0
Sec. Patch : 2018-02-05
Build Time : 17.05.2018
Product Model : Infinity_k2
Product Brand : TELENOR
Product Name : Infinity_k2
Product Device : Infinity_k2
Product Board : TELENOR
Product Manfct : TELENOR
Board Platform : mt6737t
Product Info : Infinity_k2

USERDATA : FILESYSTEM : EXT4 with FDE ( Full Disk Encryption *)

IMEI[0] : 358022090640865
IMEI[1] : 358022090640873
NVRAM check : Passed!
NVRAM : SEC NORMAL [ No extra security ]

Backup sensetive data [ 14 ]
Backup path : Backup\MT6735__0EEEA03C6D693536E4E3B7B9AD3BEE83\
[3] Read : NVRAM
[19] Read : NVDATA
[2] Read : PROINFO
[6] Read : LK
[4] Read : PROTECT1
[5] Read : PROTECT2
[0] Read : PRELOADER
[12] Read : SECCFG
Backup done!


Done!
Elapsed: 00:00:49

Operation : SP Unlock [ v2.24 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM4)
MODE : PRELOADER PORT
PORT : 4
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0xFF|0x01
BROM : PRELOADER PORT
MODE : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6735
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 150100464531324D42076D57D09124A5
DAInf: 4 : 2 : 155
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

EMMC: 150100464531324D42076D57D09124A5
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FE12MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3A3E00000 [ 14.56 GB ]

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]

CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : EEEA03C6D693536E4E3B7B9AD3BEE83

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

ID0 : Lock : Not Locked | MNC : 1024 | CNT : 5 | CODE : 20180124
ID1 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 56781234
ID2 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 11112222
ID3 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 33334444
ID4 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 55556666
ID5 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 77778888
ID6 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 99990000



Done!
Elapsed: 00:00:12
  Reply With Quote
The Following User Says Thank You to jddj For This Useful Post:
Old 06-12-2021, 07:46   #66834 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 7,632
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,237
Qmobile I8I SPD77XX 2019 FRP Reset Done With King Infinity CM2



Code:
Card found: S/N : A19EC787 , v0147
Chinese Miracle II  [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Android 7.x]

Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 
3. Insert cable

 ====  Wait for phone...

Phone found! [ 82 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ... 
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size  : 0x00000001276F7000
State : 0x0001

Mount : /cache
Size  : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x/6.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:25

Reconnect Power/Cable!
  Reply With Quote
Old 06-12-2021, 15:37   #66835 (permalink)
No Life Poster
 
ribbentrop's Avatar
 
Join Date: Sep 2003
Location: Ukraine
Age: 48
Posts: 4,295
Member: 40400
Status: Offline
Thanks Meter: 1,125
ZTE A5_2020 FRP wiped!

Code:
Operation : Format FS / Reset Settings [ v2.12 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : ZTE : ZTE_BLADE_A5_A7_[2019]
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0004
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : Control transfered!

Boot Done!

Wipe Ok : FRP

Reconnect Power/Cable!

Done!
Elapsed: 00:00:21
  Reply With Quote
Old 06-13-2021, 05:20   #66836 (permalink)
Freak Poster
 
Join Date: Jun 2016
Location: INDIA (BIHAR,MOTIHARI)
Posts: 265
Member: 2589490
Status: Offline
Sonork: live:.cid.32a2af136177ed3
Thanks Meter: 178
Donate money to this user
Arrow Vivo Y17 Password frp reset With CM2 Tool Vivo 1902

  Reply With Quote
Old 06-13-2021, 06:09   #66837 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 7,632
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,237
Vivo Y20 MTK6765 FRP/Pattren Reset Done With Phardo King Infinity CM2



Code:
Card found : A19EC787 , v0147
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.20

Load IDBase v125162 Ok!


Operation : Reset Settings/Format FS [ v2.20 ]
Mode : FULL FACTORY ( FORCED + FRP )
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM7)
MODE : BOOTROM
PORT : 7
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN RAPHAEL
BROM : MEID : 4AEC4A9E0AEADF0538B3205C58095EB8
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2112 | Manual : Disabled
BROM : SOCID : 33FCB50F4F803F817C50BEB15E98FB04AB3035851CD9B636D7086D8F6AB519EB
BROM : SLA : Local Auth 
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : INFINITY
     EMI : SRC : PRELOADER_INFINITY_0
     EMI : CNT : 0004
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0xC0000000 [ 3.00 GB ]

        EMMC: 90014A68423861503E030088C052A723
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : hB8aP>
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : B91CB645C85B5C523C2773E1AC0B00C5

DA : USB : HIGH-SPEED

Boot done!


Done!
Elapsed: 00:00:41

Reconnect Power/Cable!

Operation : Reset Settings/Format FS [ v2.20 ]
Mode : FULL FACTORY ( FORCED + FRP )
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM7)
MODE : BOOTROM
PORT : 7
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN RAPHAEL
BROM : MEID : 4AEC4A9E0AEADF0538B3205C58095EB8
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2112 | Manual : Disabled
BROM : SOCID : 33FCB50F4F803F817C50BEB15E98FB04AB3035851CD9B636D7086D8F6AB519EB
BROM : SLA : Local Auth 
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : INFINITY
     EMI : SRC : PRELOADER_INFINITY_0
     EMI : CNT : 0004
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0xC0000000 [ 3.00 GB ]

        EMMC: 90014A68423861503E030088C052A723
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : hB8aP>
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : B91CB645C85B5C523C2773E1AC0B00C5

DA : USB : HIGH-SPEED

Boot done!

Format Ok : USERDATA
Format Ok : CACHE
Format Ok : RESET PROTECTION
Format Ok : USERDATA

Done!
Elapsed: 00:00:23

Reconnect Power/Cable!
  Reply With Quote
Old 06-13-2021, 10:51   #66838 (permalink)
No Life Poster
 
technomak's Avatar
 
Join Date: Sep 2013
Location: KERALA, INDIA
Posts: 1,014
Member: 2035802
Status: Offline
Sonork: 100.1675827
Thanks Meter: 709
Donate money to this user
MI Play flashing done

Operation : Identify [ v2.24 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM26)
MODE : BOOTROM
PORT : 26
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN RAPHAEL
BROM : MEID : D792CDF38D46314005C110F520516936
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2112 | Manual : Disabled
BROM : SOCID : 3FC2C138635D59E3FBD4343C5D9D145214CB216BAF012E6718 E1327932484070
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Look for cookies
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_lotus.bin
EMI : CNT : 000A
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]

EMMC: 90014A68433861503E0361162990160F
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : hC8aP>
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 52B182141A6DD424D7E39DA887A041F4

DA : USB : HIGH-SPEED

Boot done!

USERDATA : ENCRYPTED

NVRAM check : Passed!
NVRAM : SEC SIGNED [ IMEI RSA SIGNED ]

Backup sensetive data [ 14 ]
Backup path : Backup\MT6765__52B182141A6DD424D7E39DA887A041F4\
[25] Read : NVRAM
[8] Read : NVDATA
[15] Read : PROINFO
[26] Read : LK
[7] Read : NVCFG
[10] Read : PROTECT1
[11] Read : PROTECT2
[13] Read : PERSIST
[0] Read : PRELOADER
[12] Read : SECCFG
Backup done!


STORAGE : LifeStatus : eMMC : OK!

Done!
Elapsed: 00:00:46

Preloader [HW DEV] Info :
EMI : DEV : MT6765
EMI : SRC : preloader_lotus.bin
EMI : CNT : 000A
EMI : [00] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX | DEV : hB8aP> : RAM : [ 3.00 GB ]
EMI : [01] : eMMC : DDR3 : ID : 90014A484147346132 : VEN : HYNIX | DEV : HAG4a2 : RAM : [ 2.00 GB ]
EMI : [02] : eMMC : DDR3 : ID : 13014E53304A394237 : VEN : MICRON | DEV : S0J9B7 : RAM : [ 3.00 GB ]
EMI : [03] : eMMC : DDR3 : ID : 150100514536334D42 : VEN : SAMSUNG | DEV : QE63MB : RAM : [ 2.00 GB ]
EMI : [04] : eMMC : LP_DDR4X : ID : 90014A484347386134 : VEN : HYNIX | DEV : HCG8a4 : RAM : [ 4.00 GB ]
EMI : [05] : eMMC : LP_DDR4X : ID : 90014A68433861503E : VEN : HYNIX | DEV : hC8aP> : RAM : [ 4.00 GB ]
EMI : [06] : eMMC : LP_DDR4X : ID : 150100334836434142 : VEN : SAMSUNG | DEV : 3H6CAB : RAM : [ 6.00 GB ]
EMI : [07] : eMMC : LP_DDR4X : ID : 150100335636434D42 : VEN : SAMSUNG | DEV : 3V6CMB : RAM : [ 6.00 GB ]
EMI : [08] : eMMC : LP_DDR4X : ID : 90014A68433861503E : VEN : HYNIX | DEV : hC8aP> : RAM : [ 6.00 GB ]
EMI : [09] : eMMC : LP_DDR4X : ID : 450100444134303634 : VEN : SANDISK | DEV : DA4064 : RAM : [ 4.00 GB ]

Operation : Write Flash [ v2.24 ]

Repartition : Enabled
Flash Verify : Enabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Disabled
Safe UserData : Disabled
Flash Format : Disabled

Files :22
[FL] : Set : preloader_lotus.bin
[FL] : Set : recovery.img
[FL] : Set : efuse.img
[FL] : Set : md1img.img
[FL] : Set : spmfw.img
[FL] : Set : scp.img
[FL] : Set : scp.img
[FL] : Set : sspm.img
[FL] : Set : sspm.img
[FL] : Set : lk.img
[FL] : Set : lk.img
[FL] : Set : boot.img
[FL] : Set : logo.bin
[FL] : Set : odmdtbo.img
[FL] : Set : tee.img
[FL] : Set : tee.img
[FL] : Set : vendor.img
[FL] : Set : cust.img
[FL] : Set : system.img
[FL] : Set : vbmeta.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0xFD800B30 [ 3.96 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM26)
MODE : BOOTROM
PORT : 26
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN RAPHAEL
BROM : MEID : D792CDF38D46314005C110F520516936
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2112 | Manual : Disabled
BROM : SOCID : 3FC2C138635D59E3FBD4343C5D9D145214CB216BAF012E6718 E1327932484070
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_lotus.bin
EMI : CNT : 000A
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]

EMMC: 90014A68433861503E0361162990160F
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : hC8aP>
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 52B182141A6DD424D7E39DA887A041F4

DA : USB : HIGH-SPEED

Boot done!

[FL] : HW verification passed!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : Pre-Erase
Erase : 0x0000000000000000 : 0x0000000003688000
Erase : 0x0000000005688000 : 0x0000000006000000
Erase : 0x000000000C800000 : 0x0000000000800000
Erase : 0x0000000010000000 : 0x0000000000200000
Erase : 0x0000000010500000 : 0x0000000008980000
Erase : 0x000000001CE80000 : 0x0000000204980000

[FL] : RePartition
[FL] : RePartition Ok!


[FL] : Flashing now ...

Write : PRELOADER
Update bootloader backup copy ...
Update bootloader backup copy Ok!
Write : RECOVERY
Write : EFUSE
Write : MD1IMG
Write : SPMFW
Write : SCP1
Write : SCP2
Write : SSPM_1
Write : SSPM_2
Write : LK
Write : LK2
Write : BOOT
Write : LOGO
Write : ODMDTBO
Write : TEE1
Write : TEE2
Write : VENDOR
Write : CUST
FAIL : SEC : IMG TOO LARGE
Write : SYSTEM
Write : VBMETA
Write : CACHE
Write : USERDATA

Ultra : OK! [ All failed parts successfully flashed ]

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : RePartition
[FL] : RePartition Ok!

[FL] : Flashing finished!

Done!
Elapsed: 00:02:24

Reconnect Power/Cable!
  Reply With Quote
Old 06-13-2021, 11:47   #66839 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 3,932
Member: 2644066
Status: Offline
Thanks Meter: 1,601
Vgo tel s500 hang on logo done by cm2

Card found : S/N : 73CA70CC , v0148
Chinese Miracle II [MTK module] v 1.58

Load File
File_Info : KEYTAK61D_GB_11C_PCB01_gprs_MT6261_S00.T2014_VERSI ON.bin
FileVersion : T2014_VERSION
Load File Ok


Operation : Flash [ v1.58 ]

======= Flash
Files set for flashing :
[ MCU ] : KEYTAK61D_GB_11C_PCB01_gprs_MT6261_S00.T2014_VERSI ON.bin

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 3 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : AEBE2CF719C4AB65A86E63FC51F92DF3
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

File_Info : KEYTAK61D_GB_11C_PCB01_gprs_MT6261_S00.T2014_VERSI ON.bin
FileVersion : T2014_VERSION
Flash now

Erase region , wait ...
Write data , wait ...
Write : KEYTAK61D_GB_11C_PCB01_gprs_MT6261_S00.T2014_VERSI ON.bin

Done!
Elapsed: 00:00:42
Reconnect Power/Cable!
  Reply With Quote
Old 06-13-2021, 11:49   #66840 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 3,932
Member: 2644066
Status: Offline
Thanks Meter: 1,601
Qmobile e1 reset frp done by cm2

Card found : S/N : 73CA70CC , v0148
Chinese Miracle II [MTK module] v 1.58

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 5200011541423133E0CD064297175EC4
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BAB13
[eMMC] : FLASH_CID : 15010052333142414206CDE0C45E8397
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0x0CF2E6DE3E80C5F6F6B221A4090CFFFD
INT RAM : 0x00020000
EXT RAM : 0xC0000000 [3 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!
Clear DIN
Clear Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:45
Reconnect Power/Cable!
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 17:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 11:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 09:03
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 20:17

 



All times are GMT +1. The time now is 01:49.



Powered by Searchlight © 2021 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.55999 seconds with 9 queries

SEO by vBSEO