GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 09-14-2021, 11:07   #67921 (permalink)
No Life Poster
 
syed tuqeer's Avatar
 
Join Date: Dec 2007
Location: PAKISTAN
Posts: 8,788
Member: 654997
Status: Offline
Sonork: 1613804(Don't Spam Plz)
Thanks Meter: 4,023
Digit4G-Elite Hang on logo Write Firmware Done :)


Code:
Created by Infinity-Box (c) 2021
Chinese Miracle II : MediaTek Service Module
Device Info file   : _Android_info.txt

Patch Level    : MRA58K
Display ID     : Digit_M42843DG_SW09_20201023_1839
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2015-10-01
Build Time     : 23.10.2020
Product Model  : Digit4G-Elite
Product Brand  : Digit
Product Name   : Digit4G-Elite
Product Device : Digit4G-Elite
Product Manfct : alps
Board Platform : mt6739
Product Info   : Digit4G-Elite
Product Model  : mt6731

Preloader [HW DEV] Info : 
 EMI : DEV : MT6739
 EMI : SRC : preloader_fise6731_kaio_m.bin
 EMI : CNT : 0006
 EMI : [00] : eMMC : DDR3 : ID : 700100454534454434 : VEN : KINGSTON  | DEV : EE4ED4 : RAM : [ 512.00 MB ]
 EMI : [01] : eMMC : DDR3 : ID : F40122426977696E20 : VEN : BIWIN     | DEV : Biwin : RAM : [ 512.00 MB ]
 EMI : [02] : eMMC : DDR3 : ID : 150100463558354342 : VEN : SAMSUNG   | DEV : F5X5CB : RAM : [ 512.00 MB ]
 EMI : [03] : eMMC : DDR3 : ID : 150100464A32354142 : VEN : SAMSUNG   | DEV : FJ25AB : RAM : [ 512.00 MB ]
 EMI : [04] : eMMC : DDR3 : ID : FE014E50314A39344D : VEN : MICRON    | DEV : P1J94M : RAM : [ 512.00 MB ]
 EMI : [05] : eMMC : DDR3 : ID : 90014A483447326111 : VEN : HYNIX     | DEV : H4G2a : RAM : [ 512.00 MB ]

Operation : Write Flash [ v2.28 ]

Repartition   : Enabled
Flash Verify  : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW  : Enabled
SData Backup  : Disabled
Safe UserData : Disabled
Flash Format  : Disabled

Files :16
[FL] : Set : recovery.img
[FL] : Set : md1rom.img
[FL] : Set : md1dsp.img
[FL] : Set : spmfw.img
[FL] : Set : mcupmfw.img
[FL] : Set : lk.bin
[FL] : Set : lk.bin
[FL] : Set : loader_ext.img
[FL] : Set : loader_ext.img
[FL] : Set : boot.img
[FL] : Set : logo.bin
[FL] : Set : tz.img
[FL] : Set : tz.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0x1C64238C [ 454.26 MB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM9)
MODE : PRELOADER PORT
PORT : 9
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
     CODE : Zion
     TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : BROM|BL  : 0xFF|0x02
BROM : PRELOADER PORT
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
     BROM : Reset Interface!
PTFN : MediaTek USB Port_V1632 (COM461)
MODE : BOOTROM
PORT : 461
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
     CODE : Zion
     TYPE : MODERN [RAPHAEL]
BROM : MEID : A8952FA91CDE1E041A6452FEDAC96C67
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 86C6F4D929C659CCC094E9F54BA7B261026B9087F66B3F087D08767EEE0D9ED5
BROM : SLA : Local Auth 
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_fise6731_kaio_m.bin
     EMI : CNT : 0006
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x20000000 [ 512.00 MB ]

        EMMC: CID : 15010046355835434201BD03CA6C2275
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 463558354342
        EMMC: VEN : SAMSUNG : F5X5CB
        EMMC: SNN : 3171142252 ( 0xBD03CA6C) , MF : 2/2015

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00080000 [ 512.00 KB ]
              USER   : 0xE9000000 [ 3.64 GB ]

        CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 , EVOL : 0x0000

        RNID : 9F33408E91C50B8A584B181A1DADDF2C

DA : USB : HIGH-SPEED

Boot done!

[FL] : HW verification passed!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : Pre-Erase 
Erase : 0x0000000000000000 : 0x0000000002E88000
Erase : 0x0000000003688000 : 0x0000000004000000
Erase : 0x0000000008800000 : 0x0000000000A00000
Erase : 0x0000000009500000 : 0x0000000007200000
Erase : 0x0000000010C00000 : 0x0000000000200000
Erase : 0x0000000010E20000 : 0x00000000D46DBE00

[FL] : RePartition 
[FL] : RePartition Ok!


[FL] : Flashing now ... 

Write : RECOVERY
Write : MD1IMG
Write : MD1DSP
Write : SPMFW
Write : MCUPMFW
Write : LK
Write : LK2
Write : LOADER_EXT1
Write : LOADER_EXT2
Write : BOOT
Write : LOGO
Write : TEE1
Write : TEE2
Write : SYSTEM
Write : CACHE
Write : USERDATA

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : RePartition 
[FL] : RePartition Ok!

[FL] : Flashing finished!

Done!
Elapsed: 00:01:43

Reconnect Power/Cable!
  Reply With Quote
Old 09-14-2021, 11:30   #67922 (permalink)
No Life Poster
 
syed tuqeer's Avatar
 
Join Date: Dec 2007
Location: PAKISTAN
Posts: 8,788
Member: 654997
Status: Offline
Sonork: 1613804(Don't Spam Plz)
Thanks Meter: 4,023
Infinix-X690B Smart Reset Done :)

Code:
Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM461)
MODE : BOOTROM
PORT : 461
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Talbot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 10E4E42086FCE7AD8410AF8220B9AC49
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 59C6118B6A87E6957687279E630222FD9283EF868138956E30B815038347C5DA
BROM : SLA : Local Auth 
BROM : SLA : Auth Started!
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6768
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_x690b_h691.bin
     EMI : CNT : 0006
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00070000 [ 448.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : 90014A684445615033031E883C4037A3
        EMMC: VEN : HYNIX : OEM : 74 : ID : 684445615033
        EMMC: VEN : HYNIX : hDEaP3
        EMMC: SNN : 512244800 ( 0x1E883C40) , MF : 3/2020

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x1D1F000000 [ 116.48 GB ]

        CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0001 , EVOL : 0x0000

        RNID : F9FF1584930B3CA31043BABC5B3693DA

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : Infinix
Product Device : Infinix-X690B
Product Model  : Infinix X690B
Product Name   : X690B-GL
Patch Level    : QP1A.190711.020
Display ID     : X690B-H691DE-Q-GL-210630V338
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-06-05
Build Time     : 30.06.2021
Product Info   : x690b_h691
Product Board  : Infinix-X690B
Board Platform : mt6768
Product Manfct : INFINIX MOBILITY LIMITED

USERDATA : FILESYSTEM : F2FS  with FBE ( File-Base Encryption )

NVRAM : TK_MD_BASIC_MDBIN_PCB01_MT6768_S00.MOLY_LR12A_R3_MP_V94_4_P40
NVRAM : 0xB91221EF
NVRAM : State : Ok!
INFO  : WiFi MAC : AA0036004400
INFO  : BlTh MAC : 80795DF9531A
INFO  : IMEI[1] : 354359112
INFO  : IMEI[2] : 354359112


Backup sensetive data [ 16 ]
Backup path : Backup\MT6768__10E4E42086FCE7AD8410AF8220B9AC49\
[27] Read : NVRAM
[10] Read : NVDATA
[3] Read : PROINFO
[28] Read : LK
[9] Read : NVCFG
[12] Read : PROTECT1
[13] Read : PROTECT2
[1] Read : PGPT
[11] Read : PERSIST
[0] Read : PRELOADER
Backup done!


STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : UNLOCKED!

Done!
Elapsed: 00:00:28

Operation : Reset Settings/Format FS [ v2.28 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM461)
MODE : BOOTROM
PORT : 461
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Talbot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 10E4E42086FCE7AD8410AF8220B9AC49
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 59C6118B6A87E6957687279E630222FD9283EF868138956E30B815038347C5DA
BROM : SLA : Local Auth 
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6768
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_x690b_h691.bin
     EMI : CNT : 0006
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00070000 [ 448.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : 90014A684445615033031E883C4037A3
        EMMC: VEN : HYNIX : OEM : 74 : ID : 684445615033
        EMMC: VEN : HYNIX : hDEaP3
        EMMC: SNN : 512244800 ( 0x1E883C40) , MF : 3/2020

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x1D1F000000 [ 116.48 GB ]

        CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0001 , EVOL : 0x0000

        RNID : F9FF1584930B3CA31043BABC5B3693DA

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x825657

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!
Elapsed: 00:00:30

Reconnect Power/Cable!
  Reply With Quote
Old 09-14-2021, 13:21   #67923 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Sindh Pakistan
Posts: 8,344
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 15,227
Smile Oppo A12 Smart Reset Done

Operation : Reset Settings/Format FS [ v2.28 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM8)
MODE : BOOTROM
PORT : 8
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 53721C3D321996AB168170C908CCAA5A
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : EED30ED851389A365B92065F0362724FD1903AC47E9440BD16 0468151C93FD61
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_oppo6765_19451.bin
EMI : CNT : 000A
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: CID : 1501003458364B4D42030F0ECCA417C3
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 3458364B4D42
EMMC: VEN : SAMSUNG : 4X6KMB
EMMC: SNN : 252628132 ( 0x0F0ECCA4) , MF : 1/2020

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 166E7941B19A43DD3803F73F83AE4F5A

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x815757

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!
Elapsed: 00:02:54

Reconnect Power/Cable!
  Reply With Quote
Old 09-14-2021, 13:55   #67924 (permalink)
No Life Poster
 
Luckey1's Avatar
 
Join Date: Jun 2014
Location: Infinity Box Team
Posts: 2,058
Member: 2197212
Status: Offline
Sonork: N/A
Thanks Meter: 659
Operation : Reset Settings/Format FS [ v2.28 ]
Mode : FRP [ RESET PROTECTION ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM75)
MODE : PRELOADER PORT
PORT : 4
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x01
BROM : PRELOADER PORT
MODE : TECNO : LB6 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_SWSEC.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 510001154D33364465BE01426DB6CAE4
DAInf: 4 : 2 : 156
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

EMMC: 150100514436334D4201BE65E4CAB66D
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QD63MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 6E3EB2D94A1A189321B9050970A09938

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:25

Reconnect Power/Cable!
  Reply With Quote
Old 09-14-2021, 14:09   #67925 (permalink)
No Life Poster
 
Luckey1's Avatar
 
Join Date: Jun 2014
Location: Infinity Box Team
Posts: 2,058
Member: 2197212
Status: Offline
Sonork: N/A
Thanks Meter: 659
Vgotel i251 read user code done

Operation : Read UserCode [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 8 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CA02
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 9D75C037A7909E73FA093CC389089A6B
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

Read ExtData
Sorting ExtData
Reading UserCode

Active : Yes , Code : 1542

Privacy Lock :Q

Done!
Elapsed: 00:00:28
Reconnect Power/Cable!
  Reply With Quote
Old 09-14-2021, 15:08   #67926 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 7,704
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,245
Infinix X625 MT6757 Pattren/FRP Reset Done With King Infinity CM2



Code:
Card found : A19EC787 , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

UserName and/or Password not set! Can't continue!

Update failed! Check settings and/or internet connection!

Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM122)
MODE : PRELOADER PORT
PORT : 122
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6757 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     CODE : Kibo
     TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : BROM|BL  : 0xFF|0x02
BROM : PRELOADER PORT
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : TECNO : SEC_BASE | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6757
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
     BROM : Reset Interface!
PTFN : MediaTek USB Port (COM135)
MODE : BOOTROM
PORT : 135
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6757 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     CODE : Kibo
     TYPE : MODERN [RAPHAEL]
BROM : MEID : DAB4DA5DCC88E2DAAFDD42B90905C44D
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SLA : Local Auth 
BROM : SLA : Auth Started!
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001E
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : TECNO : SEC_BASE | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6757
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_x625c64_h576.bin
     EMI : CNT : 0004
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00080000 [ 512.00 KB ]
        DRAM: 0x200000000 [ 8.00 GB ]

        EMMC: CID : 90014A484347386134A20630743BB52B
        EMMC: VEN : HYNIX : OEM : 74 : ID : 484347386134
        EMMC: VEN : HYNIX : HCG8a4
        EMMC: SNN : 103838779 ( 0x0630743B) , MF : 11/2018

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6757 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 , EVOL : 0x0000

        RNID : 8E557F0AB6CC204445637BC5FA33D701

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM244)
MODE : PRELOADER PORT
PORT : 244

Boot done!

Patch Level    : PPR1.180610.011
Display ID     : X625C-H576CD-P-191021V99
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2019-10-05
Build Time     : 21.10.2019
Product Model  : Infinix X625C
Product Brand  : Infinix
Product Name   : H576CD
Product Device : Infinix-X625C
Product Manfct : alps
Product Info   : x625c64_h576
Product Board  : Infinix-X625C
Board Platform : mt6757
Product Manfct : INFINIX MOBILITY LIMITED

USERDATA : FILESYSTEM : EXT4  with FDE ( Full Disk Encryption **)

NVRAM : TK_MD_BASIC_MDBIN_PCB01_MT6757P_S00.MOLY_LR11_W1630_MD_MP_V120_P3
NVRAM : 0x3A01E5677
NVRAM : State : Ok!
INFO  : WiFi MAC : AA0036004400
INFO  : BlTh MAC : 74C17DB70201
INFO  : IMEI[1] : 355184104764769
INFO  : IMEI[2] : 355184104764777


Backup sensetive data [ 16 ]
Backup path : Backup\MT6757__DAB4DA5DCC88E2DAAFDD42B90905C44D\
[8] Read : NVRAM
[32] Read : NVDATA
[24] Read : PROINFO
[9] Read : LK
[31] Read : NVCFG
[19] Read : PROTECT1
[20] Read : PROTECT2
[1] Read : PGPT
[18] Read : PERSIST
[0] Read : PRELOADER
Backup done!


STORAGE : Life Status : eMMC : NOT implemented in selected DA!
STORAGE : OTP Status : NOT Enabled!

Done!
Elapsed: 00:00:42

Operation : Reset Settings/Format FS [ v2.28 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM122)
MODE : PRELOADER PORT
PORT : 122
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6757 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     CODE : Kibo
     TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : BROM|BL  : 0xFF|0x02
BROM : PRELOADER PORT
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : TECNO : SEC_BASE | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6757
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
     BROM : Reset Interface!
PTFN : MediaTek USB Port (COM135)
MODE : BOOTROM
PORT : 135
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6757 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     CODE : Kibo
     TYPE : MODERN [RAPHAEL]
BROM : MEID : DAB4DA5DCC88E2DAAFDD42B90905C44D
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SLA : Local Auth 
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001E
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : TECNO : SEC_BASE | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6757
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_x625c64_h576.bin
     EMI : CNT : 0004
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00080000 [ 512.00 KB ]
        DRAM: 0x200000000 [ 8.00 GB ]

        EMMC: CID : 90014A484347386134A20630743BB52B
        EMMC: VEN : HYNIX : OEM : 74 : ID : 484347386134
        EMMC: VEN : HYNIX : HCG8a4
        EMMC: SNN : 103838779 ( 0x0630743B) , MF : 11/2018

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6757 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 , EVOL : 0x0000

        RNID : 8E557F0AB6CC204445637BC5FA33D701

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM244)
MODE : PRELOADER PORT
PORT : 244

Boot done!

SmartInfo : 0x815757

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!
Elapsed: 00:00:36

Reconnect Power/Cable!
  Reply With Quote
Old 09-14-2021, 15:55   #67927 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 4,143
Member: 2644066
Status: Offline
Thanks Meter: 1,665
Qmobile lt100 reset frp done by cm2

Card found : 73CA70CC , v0150
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.13

Load IDBase v8331 Ok!


Operation : Identify [ v2.13 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC983x_BASE : SC9832A_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : NRD90M
Display ID : QMobileLT100_MP_28_08
Ver. Incmt : 69
Ver. CodeName : REL
Ver. Release : 7.0
Sec. Patch : 2018-06-05
Build Time : 28.08.2018
Product Model : QMobile LT100
Product Brand : QMobile
Product Name : LT100
Product Device : LT100
Product Board : QMobile
Product Manfct : QMobile
Board Platform : sc8830
Product Info : LT100


Platform Version: MOCORTM_15C_W17.15.4_P10_Debug
Project Version: sc983x_cp1
BASE Version: FM_BASE_15C_W17.15.4_P10
HW Version: sc983x_modem
CMP_Time : 08-07-2017 17:33:03

MODEM TAG : MOCORTM_15C_W17.15.4_P10_Debug_FM_BASE_15C_W17.15. 4_P10_sc983x_modem_sc983x_cp1



- > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:00:29

Operation : Format FS / Reset Settings [ v2.13 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC983x_BASE : SC9832A_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP

Reconnect Power/Cable!

Done!
Elapsed: 00:00:25
  Reply With Quote
Old 09-14-2021, 15:58   #67928 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 4,143
Member: 2644066
Status: Offline
Thanks Meter: 1,665
Vivo s1 read factory file done by cm2

Card found : 73CA70CC , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v98353 Ok!

Update configuration ...
Update Ok!
Load IDBase v98353 Ok!

Operation : Read Firmware [ v2.28 ]

ExtSparse : Enabled
ForceRead : Enabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM13)
MODE : BOOTROM
PORT : 13
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Talbot
TYPE : MODERN [RAPHAEL]
BROM : MEID : 2860C9E950692EADD3F429516BB96422
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 39943AD98F9470F0EE1465917324140FBD425BFF83BBF44AE4 6626778677E567
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6768
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_k68v1_64.bin
EMI : CNT : 000B
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00070000 [ 448.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]

EMMC: CID : 150100445636444D42021B1190F5A62F
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 445636444D42
EMMC: VEN : SAMSUNG : DV6DMB
EMMC: SNN : 454136053 ( 0x1B1190F5) , MF : 10/2019

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x1D1EC00000 [ 116.48 GB ]

CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0001 , EVOL : 0x0000

RNID : 64B59D1162C38FD19FE8E568C04017F1

DA : USB : HIGH-SPEED

Boot done!

Product Brand : vivo
Product Device : 1907N
Product Model : vivo 1907
Product Name : 1907N
Patch Level : RP1A.200720.012
Display ID : RP1A.200720.012 release-keys
Product Info : k68v1_64
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2021-08-01
Build Time : 29.07.2021
Product Board : k68v1_64
Board Platform : mt6768
Product Manfct : vivo

MT6768__vivo__vivo_1907__11__RP1A.200720.012__k68v 1_64

Read : preloader.bin
Read : recovery.img
Read : vbmeta.img
Read : backup.img
Read : survival.img
Read : reserved.img
Read : cust.img
ExtSparse : Compression ratio : 92%
Read : persist.img
ExtSparse : Compression ratio : 45%
Read : proinfo.img
Read : efuse.img
Read : nvram.bin
Read : logo.bin
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : gz.img
Read : lk.bin
Read : boot.img
Read : dtbo.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 57%
Read : system.img
ExtSparse : Compression ratio : 12%
Read : cache.img
Read : userdata.img

FW Size : 6.08 GB
Android Info saved : _Android_info.txt
Scatter : MT6768_Android_scatter.txt
Saved to : C:\InfinityBox\CM2MT2\Backup\MT6768__vivo__vivo_19 07__11__RP1A.200720.012__k68v1_64\

Done!
Elapsed: 00:11:51
  Reply With Quote
Old 09-14-2021, 15:59   #67929 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 4,143
Member: 2644066
Status: Offline
Thanks Meter: 1,665
Vivo s1 reset frp done by cm2

Card found : 73CA70CC , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v98353 Ok!

Update configuration ...
Update Ok!
Load IDBase v98353 Ok!

Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM13)
MODE : BOOTROM
PORT : 13
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Talbot
TYPE : MODERN [RAPHAEL]
BROM : MEID : 2860C9E950692EADD3F429516BB96422
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 39943AD98F9470F0EE1465917324140FBD425BFF83BBF44AE4 6626778677E567
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6768
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_k68v1_64.bin
EMI : CNT : 000B
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00070000 [ 448.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]

EMMC: CID : 150100445636444D42021B1190F5A62F
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 445636444D42
EMMC: VEN : SAMSUNG : DV6DMB
EMMC: SNN : 454136053 ( 0x1B1190F5) , MF : 10/2019

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x1D1EC00000 [ 116.48 GB ]

CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0001 , EVOL : 0x0000

RNID : 64B59D1162C38FD19FE8E568C04017F1

DA : USB : HIGH-SPEED

Boot done!

Product Brand : vivo
Product Device : 1907N
Product Model : vivo 1907
Product Name : 1907N
Patch Level : RP1A.200720.012
Display ID : RP1A.200720.012 release-keys
Product Info : k68v1_64
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2021-08-01
Build Time : 29.07.2021
Product Board : k68v1_64
Board Platform : mt6768
Product Manfct : vivo

USERDATA : FILESYSTEM : EXT4 with FBE ( File-Base Encryption )

NVRAM : BBK_R0MP1_K68V1_64_BSP_MDBIN_PCB01_MT6768_S00.MOLY _LR12A_R3_MP_V136_6_P25
NVRAM : 0xB50F6BAF
NVRAM : State : Ok!
INFO : WiFi MAC : 000000000000
INFO : BlTh MAC : 20311CFAAE74
INFO : IMEI[1] : 863691046128999
INFO : IMEI[2] : 863691046128981


Backup sensetive data [ 16 ]
Backup path : Backup\MT6768__2860C9E950692EADD3F429516BB96422\
[23] Read : NVRAM
[14] Read : NVDATA
[20] Read : PROINFO
[33] Read : LK
[13] Read : NVCFG
[16] Read : PROTECT1
[17] Read : PROTECT2
[1] Read : PGPT
[15] Read : PERSIST
[0] Read : PRELOADER
Backup done!


STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : UNLOCKED!

Done!
Elapsed: 00:00:40

Operation : Reset Settings/Format FS [ v2.28 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM13)
MODE : BOOTROM
PORT : 13
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Talbot
TYPE : MODERN [RAPHAEL]
BROM : MEID : 2860C9E950692EADD3F429516BB96422
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 39943AD98F9470F0EE1465917324140FBD425BFF83BBF44AE4 6626778677E567
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6768
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_k68v1_64.bin
EMI : CNT : 000B
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00070000 [ 448.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]

EMMC: CID : 150100445636444D42021B1190F5A62F
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 445636444D42
EMMC: VEN : SAMSUNG : DV6DMB
EMMC: SNN : 454136053 ( 0x1B1190F5) , MF : 10/2019

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x1D1EC00000 [ 116.48 GB ]

CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0001 , EVOL : 0x0000

RNID : 64B59D1162C38FD19FE8E568C04017F1

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x835757

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!
Elapsed: 00:00:44

Reconnect Power/Cable!
  Reply With Quote
Old 09-14-2021, 16:00   #67930 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 4,143
Member: 2644066
Status: Offline
Thanks Meter: 1,665
Vivo y91c reset frp done by cm2

Card found : 73CA70CC , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v98353 Ok!

Update configuration ...
Update Ok!
Load IDBase v98353 Ok!

Operation : Reset Settings/Format FS [ v2.28 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM13)
MODE : BOOTROM
PORT : 13
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : CD1D3A1D91BD5AC0F484902EAABA216B
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 16FC46718CFBD0DD816C9016AC87E7E458029723386468ACEC 15ED12B7B8F7CD
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_k62v1_64_bsp.bin
EMI : CNT : 000C
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232,00 KB ]
DRAM: 0x80000000 [ 2,00 GB ]

EMMC: CID : 15010051583633414209060FD48E678B
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 515836334142
EMMC: VEN : SAMSUNG : QX63AB
EMMC: SNN : 101700750 ( 0x060FD48E) , MF : 6/2020

EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x747C00000 [ 29,12 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 7B620E89FA757F5EDE18EEA8B88A73FD

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x805757

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!
Elapsed: 00:01:06

Reconnect Power/Cable!
  Reply With Quote
Old 09-15-2021, 10:39   #67931 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 7,704
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,245
Infinix X688B MT6765 FRP/pattren Reset Done With King Infinity CM2



Code:
Card found : A19EC787 , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

UserName and/or Password not set! Can't continue!

Update failed! Check settings and/or internet connection!

Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM122)
MODE : PRELOADER PORT
PORT : 122
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : BROM|BL  : 0xFF|0x03
BROM : PRELOADER PORT
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2044 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
     BROM : Reset Interface!
PTFN : MediaTek USB Port (COM135)
MODE : BOOTROM
PORT : 135
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : B0294CF2625085DD851EA17A3465C146
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 1F7F7F005380690C35E3404BA93D91A1083B8237494A51ACEDDB78E677B4BE51
BROM : SLA : Local Auth 
BROM : SLA : Auth Started!
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2044 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_x688b_h659.bin
     EMI : CNT : 0013
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : 90014A68433961503301002D248D2847
        EMMC: VEN : HYNIX : OEM : 74 : ID : 684339615033
        EMMC: VEN : HYNIX : hC9aP3
        EMMC: SNN : 2958477 ( 0x002D248D) , MF : 2/2021

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 4EE9D7B06C8827B8188391AE631FCCD

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : Infinix
Product Device : Infinix-X688B
Product Model  : Infinix X688B
Product Name   : X688B-GL
Patch Level    : QP1A.190711.020
Display ID     : X688B-H659ABCEF-Q-GL-210308V252
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-03-05
Build Time     : 08.03.2021
Product Info   : x688b_h659
Product Board  : Infinix-X688B
Board Platform : mt6765
Product Manfct : INFINIX MOBILITY LIMITED

USERDATA : FILESYSTEM : F2FS  with FBE ( File-Base Encryption )

NVRAM : TK_MD_BASIC_MDBIN_PCB01_MT6765_S00.MOLY_LR12A_R3_MP_V118_11_P29
NVRAM : 0xA208C02F
NVRAM : State : Ok!
INFO  : WiFi MAC : AA0036004400
INFO  : BlTh MAC : 04F993224A18
INFO  : IMEI[1] : 351594341585880
INFO  : IMEI[2] : 351594341585898


Backup sensetive data [ 16 ]
Backup path : Backup\MT6765__B0294CF2625085DD851EA17A3465C146\
[26] Read : NVRAM
[10] Read : NVDATA
[3] Read : PROINFO
[27] Read : LK
[9] Read : NVCFG
[12] Read : PROTECT1
[13] Read : PROTECT2
[1] Read : PGPT
[11] Read : PERSIST
[0] Read : PRELOADER
Backup done!


STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : UNLOCKED!

Done!
Elapsed: 00:00:56

Operation : Reset Settings/Format FS [ v2.28 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM122)
MODE : PRELOADER PORT
PORT : 122
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : BROM|BL  : 0xFF|0x03
BROM : PRELOADER PORT
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2044 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
     BROM : Reset Interface!
PTFN : MediaTek USB Port (COM135)
MODE : BOOTROM
PORT : 135
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : B0294CF2625085DD851EA17A3465C146
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 1F7F7F005380690C35E3404BA93D91A1083B8237494A51ACEDDB78E677B4BE51
BROM : SLA : Local Auth 
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2044 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_x688b_h659.bin
     EMI : CNT : 0013
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : 90014A68433961503301002D248D2847
        EMMC: VEN : HYNIX : OEM : 74 : ID : 684339615033
        EMMC: VEN : HYNIX : hC9aP3
        EMMC: SNN : 2958477 ( 0x002D248D) , MF : 2/2021

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 4EE9D7B06C8827B8188391AE631FCCD

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x825657

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!
Elapsed: 00:00:34

Reconnect Power/Cable!
  Reply With Quote
Old 09-15-2021, 14:08   #67932 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 7,704
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,245
Qmbile I6 MAtel 1 SPD77XX FRP Reset Done With King Infinity CM2



Code:
Card found: S/N : A19EC787 , v0150
Chinese Miracle II  [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Android 6.x]

Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 
3. Insert cable

 ====  Wait for phone...

Phone found! [ 82 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ... 
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size  : 0x0000000117FF7000
State : 0x0001

Mount : /cache
Size  : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x/6.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:22

Reconnect Power/Cable!
  Reply With Quote
Old Yesterday, 05:27   #67933 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 7,704
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,245
Oppo CPH1823 A1K Pattren/FRP Reset Done With King Infinity CM2



Code:
Card found : A19EC787 , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

UserName and/or Password not set! Can't continue!

Update failed! Check settings and/or internet connection!

Operation : Reset Settings/Format FS [ v2.28 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM135)
MODE : BOOTROM
PORT : 135
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 036976DF16BF16F59FB84D8E66F6DE9C
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : E99CA4A6DEED48EE4EEBC4E759F766094934E9F33ED197659F6B7C276CFA46E0
BROM : SLA : Local Auth 
BROM : SLA : Auth Started!
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_oppo6762_18540.bin
     EMI : CNT : 0009
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID : 150100514436334D420330AB9B2EA6AD
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 514436334D42
        EMMC: VEN : SAMSUNG : QD63MB
        EMMC: SNN : 816552750 ( 0x30AB9B2E) , MF : 10/2019

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 483E6069139E9EBE450D0174D6968309

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x815757

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!
Elapsed: 00:00:36

Reconnect Power/Cable!
  Reply With Quote
Old Yesterday, 06:19   #67934 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 7,704
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,245
Oppo A15 MT6765 FRP/Pattren Reset Done With King Infinity CM2



Code:
Card found : A19EC787 , v0150
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

UserName and/or Password not set! Can't continue!

Update failed! Check settings and/or internet connection!

Operation : Reset Settings/Format FS [ v2.28 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM135)
MODE : BOOTROM
PORT : 135
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : B805F1A73604C3B0942095073AEBD365
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : FC39157CBE54CAC11E1D316B439138D46467F9D94BB7A89913AC42B25C84E7A2
BROM : SLA : Local Auth 
BROM : SLA : Auth Started!
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_oppo6765.bin
     EMI : CNT : 000B
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : 150100444836444142089E73E8EF4811
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 444836444142
        EMMC: VEN : SAMSUNG : DH6DAB
        EMMC: SNN : 2658396399 ( 0x9E73E8EF) , MF : 4/2021

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 1C2E7B15AC0B5E165DEF5299ED8B83A0

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x825757

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!
Elapsed: 00:00:33

Reconnect Power/Cable!
  Reply With Quote
Old Yesterday, 14:17   #67935 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Sindh Pakistan
Posts: 8,344
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 15,227
Smile Qmobile Infinity E Lite Format Done

Operation : Reset Settings/Format FS [ v2.28 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM13)
MODE : PRELOADER PORT
PORT : 13
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : BROM|BL : 0xFF|0x01
BROM : PRELOADER PORT
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : Qmobile : Infinity E | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_SWSEC.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 460001154D3236451B1903426755E0D4
DAInf: 4 : 2 : 156
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

EMMC: CID : 150100464536324D4203191BD4E05567
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 464536324D42
EMMC: VEN : SAMSUNG : FE62MB
EMMC: SNN : 421254368 ( 0x191BD4E0) , MF : 5/2018

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3A3E00000 [ 14.56 GB ]

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]

CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 34D5BDF86A510347ED6FE3B8EADB815C

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x8F5454

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!
Elapsed: 00:00:36

Reconnect Power/Cable!
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 17:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 11:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 09:03
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 20:17

 



All times are GMT +1. The time now is 10:42.



Powered by Searchlight © 2021 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.46736 seconds with 9 queries

SEO by vBSEO