GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 04-03-2022, 07:28   #70516 (permalink)
No Life Poster
 
Nadeem Waris's Avatar
 
Join Date: Jul 2009
Location: SINDH PAKISTAN
Posts: 7,042
Member: 1080718
Status: Offline
Sonork: 100.1596539 QQ-2710826805
Thanks Meter: 2,217
jazz digit4g elite format done


Operation : Reset Settings/Format FS [ v2.34 ]

Mode : FULL FACTORY ( WIPE + FRP )

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x02
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : Reset Interface!
PTFN : MediaTek USB Port_V1632 (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : FAFD2B6821845EEBE3C75AAAEED2DE65
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 335B2D05B024B238F36820D90C27BD5A1586DEB22659E2C291 4153550FB0BBC4
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!

EMI : DEV : FireFly
EMI : SRC : preloader_fise6731_kaio_m.bin
EMI : CNT : 0006
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x20000000 [ 512.00 MB ]

EMMC: CID : 90014A4834473261110226C9ECB195DD
EMMC: VEN : HYNIX : OEM : 74 : ID : 483447326111 : PRV : 0x02
EMMC: VEN : HYNIX : H4G2a
EMMC: SNN : 650767537 ( 0x26C9ECB1 ) , MF : 9/2018

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE9000000 [ 3.64 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 , EVOL : 0x0000

RNID : 4C483AC637714584E21F21EF43F8BA5D

DA : USB : HIGH-SPEED

Boot done!

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : USERDATA

Done!
Elapsed: 00:00:23

Reconnect Power/Cable!
  Reply With Quote
Old 04-03-2022, 09:31   #70517 (permalink)
No Life Poster
 
yuranc8's Avatar
 
Join Date: Feb 2017
Location: Quelimane Mz
Age: 24
Posts: 1,944
Member: 2680008
Status: Offline
Thanks Meter: 1,360
Donate money to this user
Wink iTEL L5006S NETWORK UNLOCK Done

Code:
Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : L5006S-F3212MZ-10.0-MZ-Vodacom-V014-20210901
Platform Version: MOCORTM_18A_W20.23.2_P8_Debug
Project Version:   sharkle_Smart_Phone
BASE  Version:    FM_BASE_18A_W20.23.2_P8
HW Version:        sc9832e_modem
CMP_Time : 12-29-2020 18:41:45

MODEM TAG : MOCORTM_18A_W20.23.2_P8_Debug_FM_BASE_18A_W20.23.2_P8_sc9832e_modem_sharkle_Smart_Phone

NVMng  : SecurityInfo 
IMEI[1] : 357068261953505
IMEI[2] : 354648020000004
WIFIMAC : CCA3BDE36C26
BT_MAC  : CCA3BDE36C25
SEC : SLS:0, SKS:0, SKV:4

SLStatus : 31
Unlocking device ... 
Sync data ... 
Device unlocked!

Done!
Elapsed: 00:02:47
  Reply With Quote
The Following User Says Thank You to yuranc8 For This Useful Post:
Old 04-03-2022, 09:34   #70518 (permalink)
No Life Poster
 
yuranc8's Avatar
 
Join Date: Feb 2017
Location: Quelimane Mz
Age: 24
Posts: 1,944
Member: 2680008
Status: Offline
Thanks Meter: 1,360
Donate money to this user
Wink Xiaomi Redmi Note 8 2021 (biloba) MT6768 IMEI REPAIR Done

Code:
Operation : Identify [ v2.34 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Talbot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 00D0541BDB6369A7F14E9C5E2ED43FCF
BROM : SecLevel : 0x000000E7
BROM : SecMode  : SBC+SLA+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 6C96E24EBB69B161C276375AF5AC55336C8C33A3666AA353E041B6A0B6C70E38
BROM : SLA : Local Auth 
BROM : SLA : Starting Auth 
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6768
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!

        EMMC: CID : 13014E53304A394B391021EE99F1B777
        EMMC: VEN : MICRON : OEM : 78 : ID : 53304A394B39 : PRV : 0x10
        EMMC: VEN : MICRON : S0J9K9
        EMMC: SNN : 569285105 ( 0x21EE99F1 ) , MF : 11/2020

     EMI : DEV : FireFly
     EMI : SRC : preloader_k69v1_64.bin
     EMI : CNT : 0009
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00070000 [ 448.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : 13014E53304A394B391021EE99F1B777
        EMMC: VEN : MICRON : OEM : 78 : ID : 53304A394B39 : PRV : 0x10
        EMMC: VEN : MICRON : S0J9K9
        EMMC: SNN : 569285105 ( 0x21EE99F1 ) , MF : 11/2020

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x1D1F000000 [ 116.48 GB ]

        CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0001 , EVOL : 0x0000

        RNID : 5CA84039BF88E5A319153F2118090101

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : Redmi
Product Device : biloba
Product Model  : biloba
Product Name   : biloba_global
Patch Level    : RP1A.200720.011
Display ID     : RP1A.200720.011
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2021-04-01
Build Time     : 11.05.2021
Product Info   : biloba
Product Manfct : Xiaomi
Product Board  : biloba
Board Platform : mt6768

USERDATA : FILESYSTEM : F2FS  with FBE ( File-Base Encryption )

NVRAM : 0xB40F747D
NVRAM : State : Ok!
NVRAM : SecLv : Vendor Signed
INFO  : WiFi MAC : 081C6ECC05D0
INFO  : BlTh MAC : 081C6ECC05CD
INFO  : IMEI[1] : 869917057903929
INFO  : IMEI[2] : 358745875678763


Backup sensetive data [ 18 ]
Backup path : Backup\MT6768__00D0541BDB6369A7F14E9C5E2ED43FCF\
[40] Read : NVRAM
[21] Read : NVDATA
[37] Read : PROINFO
[20] Read : NVCFG
[23] Read : PROTECT1
[1] Read : PGPT
[22] Read : PERSIST
[0] Read : PRELOADER
Backup done!


STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : UNLOCKED!
STORAGE : RPMB Status : eMMC : RPMB  KEY PROGRAMMED [UNUSABLE]

Done!
Elapsed: 00:02:26
Code:
Operation : Unlock BootLoader [ v2.34 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Talbot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 00D0541BDB6369A7F14E9C5E2ED43FCF
BROM : SecLevel : 0x000000E7
BROM : SecMode  : SBC+SLA+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 6C96E24EBB69B161C276375AF5AC55336C8C33A3666AA353E041B6A0B6C70E38
BROM : Sending FireFly 
FireFly : Starting ...  
FireFly : Init Core
FireFly : Core init done!
FireFly : Running : v05.05.05 on MT6768
FireFly : eMMC init passed!

        EMMC: CSD : D05F01328F5913FFFFFFFFEF964000A9
        EMMC: CSD : TEMP_WRITE_PROTECT: False
        EMMC: CSD : PERM_WRITE_PROTECT: False

        EMMC: CID : 13014E53304A394B391021EE99F1B777
        EMMC: VEN : MICRON : OEM : 78 : ID : 53304A394B39 : PRV : 0x10
        EMMC: VEN : MICRON : S0J9K9
        EMMC: SNN : 569285105 ( 0x21EE99F1 ) , MF : 11/2020

        EMMC: EXTCSD : rev1.8 ( eMMC 5.1 )
        EMMC: EXTCSD [CONFIG] : 0x48,  0x02,  0x01
        EMMC: EXTCSD [PARTITION_CONFIG] : 0x48
        EMMC: EXTCSD [BOOT_BUS_WIDTH]   : 0x02
        EMMC: EXTCSD [RST_N_FUNCTION]    : 0x01
        EMMC: EXTCSD [PART_S_COMPLETED] : False
        EMMC: EXTCSD [SIZE] : Market    : 128 GB
        EMMC: EXTCSD [SIZE] : Actual    : 0x1D1F000000  [ 116.48 GB ]
        EMMC: EXTCSD [EOL] : EOL status : Normal  ( Less than 80% reserved blocks used )
        EMMC: EXTCSD [EOL_A] : SLC status : 0% - 10% used
        EMMC: EXTCSD [EOL_B] : MLC status : 0% - 10% used

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              USER   : 0x1D1F000000 [ 116.48 GB ]

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : Redmi
Product Device : biloba
Product Model  : biloba
Product Name   : biloba_global
Patch Level    : RP1A.200720.011
Display ID     : RP1A.200720.011
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2021-04-01
Build Time     : 11.05.2021
Product Info   : biloba
Product Manfct : Xiaomi
Product Board  : biloba
Board Platform : mt6768

BootLoader State : Locked!

BootLoader State : Unlocked!

Done!
Elapsed: 00:02:58

Reconnect Power/Cable!
Code:
Operation : Memory Tool Init [ v2.34 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Talbot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 00D0541BDB6369A7F14E9C5E2ED43FCF
BROM : SecLevel : 0x000000E7
BROM : SecMode  : SBC+SLA+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 6C96E24EBB69B161C276375AF5AC55336C8C33A3666AA353E041B6A0B6C70E38
BROM : Sending FireFly 
FireFly : Starting ...  
FireFly : Init Core
FireFly : Core init done!
FireFly : Running : v05.05.05 on MT6768
FireFly : eMMC init passed!

        EMMC: CSD : D05F01328F5913FFFFFFFFEF964000A9
        EMMC: CSD : TEMP_WRITE_PROTECT: False
        EMMC: CSD : PERM_WRITE_PROTECT: False

        EMMC: CID : 13014E53304A394B391021EE99F1B777
        EMMC: VEN : MICRON : OEM : 78 : ID : 53304A394B39 : PRV : 0x10
        EMMC: VEN : MICRON : S0J9K9
        EMMC: SNN : 569285105 ( 0x21EE99F1 ) , MF : 11/2020

        EMMC: EXTCSD : rev1.8 ( eMMC 5.1 )
        EMMC: EXTCSD [CONFIG] : 0x48,  0x02,  0x01
        EMMC: EXTCSD [PARTITION_CONFIG] : 0x48
        EMMC: EXTCSD [BOOT_BUS_WIDTH]   : 0x02
        EMMC: EXTCSD [RST_N_FUNCTION]    : 0x01
        EMMC: EXTCSD [PART_S_COMPLETED] : False
        EMMC: EXTCSD [SIZE] : Market    : 128 GB
        EMMC: EXTCSD [SIZE] : Actual    : 0x1D1F000000  [ 116.48 GB ]
        EMMC: EXTCSD [EOL] : EOL status : Normal  ( Less than 80% reserved blocks used )
        EMMC: EXTCSD [EOL_A] : SLC status : 0% - 10% used
        EMMC: EXTCSD [EOL_B] : MLC status : 0% - 10% used

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              USER   : 0x1D1F000000 [ 116.48 GB ]

DA : USB : HIGH-SPEED

Boot done!

Set default path : C:\InfinityBox\CM2MT2\phdata\

Ready!

MemoryTool Operation : Erase Memory

Erase selected partitions [2]
[0] Erase partition : NVDATA
Erase partition Ok!
[1] Erase partition : NVRAM
Erase partition Ok!

Operation finished!

MemoryTool Operation : Erase Memory

Erase selected partitions [2]
[0] Erase partition : NVDATA
Erase partition Ok!
[1] Erase partition : NVRAM
Erase partition Ok!

Operation finished!

MemoryTool Operation : Erase Memory

Erase selected partitions [2]
[0] Erase partition : NVDATA
Erase partition Ok!
[1] Erase partition : NVRAM
Erase partition Ok!

Operation finished!


Close MemoryTool session

Done!
Elapsed: 00:03:59

Reconnect Power/Cable!
Code:
Operation : Repair Security [ v2.34 ]
Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Talbot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 00D0541BDB6369A7F14E9C5E2ED43FCF
BROM : SecLevel : 0x000000E7
BROM : SecMode  : SBC+SLA+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 6C96E24EBB69B161C276375AF5AC55336C8C33A3666AA353E041B6A0B6C70E38
BROM : SLA : Local Auth 
BROM : SLA : Starting Auth 
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
BROM : Configuring target for META

BROM : META configured!

INIT : META confirmed!

Boot done!

AP_CHIP : MT6768
AP_SWTM : Tue May 11 23:34:19 CST 2021
AP_DSPP : global
AP_SWVR : alps-mp-r0.mp1.tc8sp3-mt6785-V1.10_lcsh.xm.r0mp1.k69v1.64_P44
MD_CHIP : MT6768
MD_SWTM : 2000.00.00
MD_DSPV : 1.0
MD_DSPP : MOLY.LR12A.R3.MP.V145.8.P22
MD_SWVR : LCSH_XM_R0MP1_MT6769_SP_HW
MD_HWVR : Unknown

IMEI[1] : FFFFFFFFFFFFFFF
IMEI[2] : FFFFFFFFFFFFFFF

IMEI[2] : 354646465464552
Item : update Ok!

Done!
Elapsed: 00:01:29

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to yuranc8 For This Useful Post:
Old 04-03-2022, 10:21   #70519 (permalink)
No Life Poster
 
Join Date: Aug 2020
Location: Mozambique
Age: 18
Posts: 581
Member: 2965136
Status: Offline
Sonork: 58846
Thanks Meter: 687
Oppo A31 FACTORY RESET Done

Code:
Card found : 46828B86 , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34

Load IDBase v312457 Ok!

UserName and/or Password not set! Can't continue!

Load IDBase v312457 Ok!

Operation : Identify [ v2.34 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM12)
MODE : BOOTROM
PORT : 12
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 4F09BE30AA44B07F4EE93F881B846174
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 0EA76CA2AF1A747DD3D87E4696F2A4F67143B7D7C96DF922633E8E10F299EC5D
BROM : SLA : Local Auth 
BROM : SLA : Starting Auth 
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!

        EMMC: CID : 90014A684339615033011041D398C77F
        EMMC: VEN : HYNIX : OEM : 74 : ID : 684339615033 : PRV : 0x01
        EMMC: VEN : HYNIX : hC9aP3
        EMMC: SNN : 272749464 ( 0x1041D398 ) , MF : 12/2020

     EMI : DEV : FireFly
     EMI : SRC : preloader_oppo6765_19181.bin
     EMI : CNT : 000A
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232,00 KB ]
        DRAM: 0x100000000 [ 4,00 GB ]

        EMMC: CID : 90014A684339615033011041D398C77F
        EMMC: VEN : HYNIX : OEM : 74 : ID : 684339615033 : PRV : 0x01
        EMMC: VEN : HYNIX : hC9aP3
        EMMC: SNN : 272749464 ( 0x1041D398 ) , MF : 12/2020

        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x01000000 [ 16,00 MB ]
              USER   : 0xE8F800000 [ 58,24 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 6A8149CCE8B4EA3B1EF48DCD67D4D6A

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : PPR1.180610.011
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2021-11-05
Product Manfct : OPPO
Build Time     : 25.11.2021
Product Brand  : OPPO
Product Model  : PDBM00
Product Info   : PDBM00
Product Name   : PDBM00
Product Device : OP4AED
SW OTA Version : PDBM00_11.A.29_0290_202111251213
Display ID     : PDBM00_11_A.29
Display ID     : PDBM00_11_A.29_211125
Kernel Info    : 4.9.117

Device UID : MT6765__PDBM00_11_A.25_210307_8cc5b21e

USERDATA : FILESYSTEM : EXT4  with FBE ( File-Base Encryption )

NVRAM : OPPO6765_19181_MDBIN_PCB01_MT6765_S00.MOLY_LR12A_R2_PIE_P35_PR1_TC16_SP_V1_P109
NVRAM : 0xC20ADC67
NVRAM : State : Ok!
INFO  : WiFi MAC : B0C952141C91
INFO  : BlTh MAC : B0C952141C90


Backup sensetive data [ 18 ]
Backup path : Backup\MT6765__4F09BE30AA44B07F4EE93F881B846174\
[28] Read : NVRAM
[12] Read : NVDATA
[19] Read : PROINFO
[29] Read : LK
[11] Read : NVCFG
[14] Read : PROTECT1
[1] Read : PGPT
[17] Read : PERSIST
[0] Read : PRELOADER
[7] Read : OPPORESERVE3
[8] Read : OPPO_CUSTOM
Backup done!


STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : UNLOCKED!
STORAGE : RPMB Status : eMMC : RPMB  KEY PROGRAMMED [UNUSABLE]

Done!
Elapsed: 00:01:39
Code:
Operation : Reset Settings/Format FS [ v2.34 ]

Mode : FACTORY RESET ( WIPE )

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM12)
MODE : BOOTROM
PORT : 12
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 4F09BE30AA44B07F4EE93F881B846174
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 0EA76CA2AF1A747DD3D87E4696F2A4F67143B7D7C96DF922633E8E10F299EC5D
BROM : SLA : Local Auth 
BROM : SLA : Starting Auth 
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!

        EMMC: CID : 90014A684339615033011041D398C77F
        EMMC: VEN : HYNIX : OEM : 74 : ID : 684339615033 : PRV : 0x01
        EMMC: VEN : HYNIX : hC9aP3
        EMMC: SNN : 272749464 ( 0x1041D398 ) , MF : 12/2020

     EMI : DEV : FireFly
     EMI : SRC : preloader_oppo6765_19181.bin
     EMI : CNT : 000A
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232,00 KB ]
        DRAM: 0x100000000 [ 4,00 GB ]

        EMMC: CID : 90014A684339615033011041D398C77F
        EMMC: VEN : HYNIX : OEM : 74 : ID : 684339615033 : PRV : 0x01
        EMMC: VEN : HYNIX : hC9aP3
        EMMC: SNN : 272749464 ( 0x1041D398 ) , MF : 12/2020

        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x01000000 [ 16,00 MB ]
              USER   : 0xE8F800000 [ 58,24 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 6A8149CCE8B4EA3B1EF48DCD67D4D6A

DA : USB : HIGH-SPEED

Boot done!

Format Ok : USERDATA

Done!
Elapsed: 00:00:43
  Reply With Quote
The Following 2 Users Say Thank You to tayobjoy1 For This Useful Post:
Old 04-03-2022, 10:49   #70520 (permalink)
No Life Poster
 
Join Date: Aug 2020
Location: Mozambique
Age: 18
Posts: 581
Member: 2965136
Status: Offline
Sonork: 58846
Thanks Meter: 687
Samsung A22 5G Android 11 Frp Reset Done

Code:
Card found : 46828B86 , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34

Load IDBase v312457 Ok!

UserName and/or Password not set! Can't continue!

Load IDBase v312457 Ok!

Operation : Identify [ v2.34 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM13)
MODE : PRELOADER PORT
PORT : 13
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6833 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Palmer
     TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : BROM|BL  : 0xFF|0x03
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6833
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
     BROM : Reset Interface!
PTFN : MediaTek USB Port (COM8)
MODE : BOOTROM
PORT : 8
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6833 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Palmer
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 223D320AF42585825E61F1590A33480C
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 09F03C3DDF502D56B03D6AE62A9DEA622DFC4BC05AB909132733403DB884B9CB
BROM : SLA : Local Auth 
BROM : SLA : Starting Auth 
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6833
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!

        EMMC: CID : 13014E47314331324C101788A49BA87D
        EMMC: VEN : MICRON : OEM : 78 : ID : 47314331324C : PRV : 0x10
        EMMC: VEN : MICRON : G1C12L
        EMMC: SNN : 394831003 ( 0x1788A49B ) , MF : 10/2021

     EMI : DEV : FireFly
     EMI : SRC : preloader_s96801aa1.bin
     EMI : CNT : 000B
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00070000 [ 448.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : 13014E47314331324C101788A49BA87D
        EMMC: VEN : MICRON : OEM : 78 : ID : 47314331324C : PRV : 0x10
        EMMC: VEN : MICRON : G1C12L
        EMMC: SNN : 394831003 ( 0x1788A49B ) , MF : 10/2021

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x1D1F000000 [ 116.48 GB ]

        CHIP : MT6833 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0001 , EVOL : 0x0000

        RNID : 5D63FC2336C4DA77828389672B60187E

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : samsung
Product Device : a22x
Product Model  : SM-A226B
Product Name   : a22xnsxx
Patch Level    : RP1A.200720.012
Display ID     : RP1A.200720.012.A226BXXU4AVB1
Build Time     : 03.02.2022
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2022-02-01
Product Info   : a22x
Product Board  : S96801AA1
Board Platform : mt6833
Product Manfct : samsung



NVRAM : TITAN_A22_R0MP1_K6833_MDBIN_PCB01_MT6833_S00.MOLY_NR15_R3_TC10_A22_PR_SP_V2_P1
NVRAM : 0xAB539979
NVRAM : State : Ok!
INFO  : WiFi MAC : AA0036004400
INFO  : BlTh MAC : 9880EEEB29ED


Backup sensetive data [ 18 ]
Backup path : Backup\MT6833__223D320AF42585825E61F1590A33480C\
[10] Read : NVRAM
[6] Read : NVDATA
[36] Read : PROINFO
[18] Read : LK
[24] Read : NVCFG
[7] Read : PROTECT1
[1] Read : PGPT
[25] Read : PERSIST
[0] Read : PRELOADER
[3] Read : EFS
[4] Read : SEC_EFS
[35] Read : PERSISTENT
Backup done!


STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : NOT Enabled!
STORAGE : RPMB Status : eMMC : RPMB  KEY PROGRAMMED [UNUSABLE]

Done!
Elapsed: 00:01:30
Code:
Operation : Memory Tool Init [ v2.34 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM13)
MODE : PRELOADER PORT
PORT : 13
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6833 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Palmer
     TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : BROM|BL  : 0xFF|0x03
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6833
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
     BROM : Reset Interface!
PTFN : MediaTek USB Port (COM8)
MODE : BOOTROM
PORT : 8
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6833 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Palmer
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 223D320AF42585825E61F1590A33480C
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 09F03C3DDF502D56B03D6AE62A9DEA622DFC4BC05AB909132733403DB884B9CB
BROM : SLA : Local Auth 
BROM : SLA : Starting Auth 
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6833
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!

        EMMC: CID : 13014E47314331324C101788A49BA87D
        EMMC: VEN : MICRON : OEM : 78 : ID : 47314331324C : PRV : 0x10
        EMMC: VEN : MICRON : G1C12L
        EMMC: SNN : 394831003 ( 0x1788A49B ) , MF : 10/2021

     EMI : DEV : FireFly
     EMI : SRC : preloader_s96801aa1.bin
     EMI : CNT : 000B
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00070000 [ 448.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : 13014E47314331324C101788A49BA87D
        EMMC: VEN : MICRON : OEM : 78 : ID : 47314331324C : PRV : 0x10
        EMMC: VEN : MICRON : G1C12L
        EMMC: SNN : 394831003 ( 0x1788A49B ) , MF : 10/2021

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x1D1F000000 [ 116.48 GB ]

        CHIP : MT6833 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0001 , EVOL : 0x0000

        RNID : 5D63FC2336C4DA77828389672B60187E

DA : USB : HIGH-SPEED

Boot done!

Set default path : C:\InfinityBox\CM2MT2\phdata\

Ready!

MemoryTool Operation : Erase Memory

Erase selected partitions [1]
[0] Erase partition : PERSISTENT
Erase partition Ok!

Operation finished!


Close MemoryTool session

Done!
Elapsed: 00:02:36
  Reply With Quote
The Following 2 Users Say Thank You to tayobjoy1 For This Useful Post:
Old 04-03-2022, 11:32   #70521 (permalink)
No Life Poster
 
Join Date: Aug 2020
Location: Mozambique
Age: 18
Posts: 581
Member: 2965136
Status: Offline
Sonork: 58846
Thanks Meter: 687
Itel A23 Pro SP Unlock Done

Code:
Card found : 46828B86 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : MANUAL LDR
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0008
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ... 
FDL : SEC : RSA auth passed!
FDL : Control transfered!

Boot Done!

Device info : 
Product Brand  : Itel
Product Device : L5006S
Product Model  : itel L5006S
Product Name   : L5006S
Patch Level    : QP1A.190711.020
Display ID     : L5006S-F3212MZ-10.0-MZ-Vodacom-V015-20211126
Ver. Incmt     : MZ-Vodacom-V015-20211126
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-11-05
Build Time     : 26.11.2021
Product Name   : F3212MZ
Product Device : itel-L5006S
Product Info   : L5006S
Product Board  : L5006S
Board Platform : sp9832e
Product Manfct : itel


NVMng  : SecurityInfo 
IMEI[1] : 357068261355271
IMEI[2] : 354648020000004
IMEI[3] : 867400020316638
WIFIMAC : FFFFFFFFFFFF
BT_MAC  : FFFFFFFFFFFF
SEC : SLS:0, SKS:0, SKV:4

Platform Version: MOCORTM_18A_W20.23.2_P8_Debug
Project Version:   sharkle_Smart_Phone
BASE  Version:    FM_BASE_18A_W20.23.2_P8
HW Version:        sc9832e_modem
CMP_Time : 12-29-2020 18:41:45

MODEM TAG : MOCORTM_18A_W20.23.2_P8_Debug_FM_BASE_18A_W20.23.2_P8_sc9832e_modem_sharkle_Smart_Phone

USERDATA : FILESYSTEM : F2FS  with FDE ( Full Disk Encryption ***)

 - > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:00:29
Code:
Operation : SP Unlock [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : MANUAL LDR
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0008
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ... 
FDL : SEC : RSA auth passed!
FDL : Control transfered!

Boot Done!

NVMng  : SecurityInfo 
IMEI[1] : 357068261355271
IMEI[2] : 354648020000004
IMEI[3] : 867400020316638
WIFIMAC : FFFFFFFFFFFF
BT_MAC  : FFFFFFFFFFFF
SEC : SLS:0, SKS:0, SKV:4

SLStatus : 31
Unlocking device ... 
Sync data ... 
Device unlocked!

Done!
Elapsed: 00:00:46
  Reply With Quote
The Following User Says Thank You to tayobjoy1 For This Useful Post:
Old 04-03-2022, 15:36   #70522 (permalink)
Freak Poster
 
Jacobkamudyariw's Avatar
 
Join Date: Sep 2021
Location: Karoi , Zimbabwe 🇿
Age: 26
Posts: 205
Member: 2996196
Status: Offline
Thanks Meter: 152
Arrow Itel ac60 l6004l sp permanently lock...sp unlock done by cm2 👏👋👏

Operation : Identify [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : L6004L-SQ591-9.0-ZA-MTN-L-V007-20210423
MemoryInfo : EMMC : 16 GB ; DRAM : 1 GB

Platform Version: MOCORTM_18A_ITEL_RLS1_W19.36.4_P15_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_ITEL_RLS1_W19.36.4_P15
HW Version: sc9832e_modem
CMP_Time : 03-26-2021 12:53:24

MODEM TAG : MOCORTM_18A_ITEL_RLS1_W19.36.4_P15_Debug_FM_BASE_1 8A_ITEL_RLS1_W19.36.4_P15_sc9832e_modem_sharkle_Sm art_Phone


PSN1 : 05487150AW006218

NVMng : SecurityInfo
IMEI[1] : 354932110211808
IMEI[2] : 354932110211816
WIFIMAC : 40D25F4EB50C
BT_MAC : 40D25F4EB50B
SEC : SLS:1, SKS:0, SKV:3


Done!
Elapsed: 00:00:21


Operation : SP Unlock [ v2. 14 ]
BootMode : SVC

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : L6004L-SQ591-9.0-ZA-MTN-L-V007-20210423
Platform Version: MOCORTM_18A_ITEL_RLS1_W19.36.4_P15_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_ITEL_RLS1_W19.36.4_P15
HW Version: sc9832e_modem
CMP_Time : 03-26-2021 12:53:24

MODEM TAG : MOCORTM_18A_ITEL_RLS1_W19.36.4_P15_Debug_FM_BASE_1 8A_ITEL_RLS1_W19.36.4_P15_sc9832e_modem_sharkle_Sm art_Phone

NVMng : SecurityInfo
IMEI[1] : 354932110211808
IMEI[2] : 354932110211816
WIFIMAC : 40D25F4EB50C
BT_MAC : 40D25F4EB50B
SEC : SLS:1, SKS:0, SKV:3

SLStatus : 32
Status : Locked! Server unlock required!

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 10, price:5
Process...
Finished

Unlocking device ...
Sync data ...
Device unlocked!

Done!
Elapsed: 00:01:02
  Reply With Quote
The Following 2 Users Say Thank You to Jacobkamudyariw For This Useful Post:
Old 04-03-2022, 18:41   #70523 (permalink)
No Life Poster
 
profkefah's Avatar
 
Join Date: Mar 2015
Location: Islam
Age: 34
Posts: 6,711
Member: 2371500
Status: Offline
Thanks Meter: 5,102
Condor g6 write firmwaredone

original poster
MS-GSM DZGSM



  Reply With Quote
The Following User Says Thank You to profkefah For This Useful Post:
Old 04-03-2022, 18:45   #70524 (permalink)
No Life Poster
 
profkefah's Avatar
 
Join Date: Mar 2015
Location: Islam
Age: 34
Posts: 6,711
Member: 2371500
Status: Offline
Thanks Meter: 5,102
Condor p6 pro lte pgn -528 -flash done

original poster
ALICHAIMA DZGSM




  Reply With Quote
The Following User Says Thank You to profkefah For This Useful Post:
Old 04-04-2022, 06:26   #70525 (permalink)
No Life Poster
 
Nadeem Waris's Avatar
 
Join Date: Jul 2009
Location: SINDH PAKISTAN
Posts: 7,042
Member: 1080718
Status: Offline
Sonork: 100.1596539 QQ-2710826805
Thanks Meter: 2,217
vivo y91 reset done

Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : MEID : 645D3305897805AB10F28A0CF065ECA4
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 789FF578D484D24D3A8D9106AA43FCD4783CDC1F7E7D6DB438 BA5A06ACD01BA5
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!

EMMC: CID : 150100514436334D42012A0BD22AC623
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 514436334D42 : PRV : 0x01
EMMC: VEN : SAMSUNG : QD63MB
EMMC: SNN : 705417770 ( 0x2A0BD22A ) , MF : 12/2019

EMI : DEV : FireFly
EMI : SRC : preloader_k61v1_64_bsp.bin
EMI : CNT : 0006
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A400 [ 233.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: CID : 150100514436334D42012A0BD22AC623
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 514436334D42 : PRV : 0x01
EMMC: VEN : SAMSUNG : QD63MB
EMMC: SNN : 705417770 ( 0x2A0BD22A ) , MF : 12/2019

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : BC65BD0EABC2ED3AF3D1E0D79A1D571C

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x805757

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!
Elapsed: 00:00:43

Reconnect Power/Cable!
  Reply With Quote
Old 04-04-2022, 07:33   #70526 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 4,884
Member: 2644066
Status: Offline
Thanks Meter: 1,734
Card found : 73CA70CC , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34

Load IDBase v312457 Ok!

Update configuration ...
Load IDBase v312457 Ok!

Operation : Identify [ v2.34 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM28)
MODE : BOOTROM
PORT : 28
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 161F7DB1684FEBADB4F5057F83BFABE2
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : F13D14D52A290FD1AE76B5E62E5B3A02B64445EA47A7929D56 609DBA379B7E7B
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!

EMMC: CID : 150100525036344D42012A46E463B637
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 525036344D42 : PRV : 0x01
EMMC: VEN : SAMSUNG : RP64MB
EMMC: SNN : 709289059 ( 0x2A46E463 ) , MF : 11/2019

EMI : DEV : FireFly
EMI : SRC : preloader_k62v1_64_bsp.bin
EMI : CNT : 000F
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]

EMMC: CID : 150100525036344D42012A46E463B637
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 525036344D42 : PRV : 0x01
EMMC: VEN : SAMSUNG : RP64MB
EMMC: SNN : 709289059 ( 0x2A46E463 ) , MF : 11/2019

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 31558A59731CA9C5FDB0359AAE767AA2

DA : USB : HIGH-SPEED

Boot done!

Product Brand : vivo
Product Device : 1901
Product Model : vivo 1901
Product Name : 1901
Patch Level : RP1A.200720.012
Display ID : RP1A.200720.012 release-keys
Product Info : k62v1_64_bsp
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2021-12-01
Build Time : 22.12.2021
Product Board : k62v1_64_bsp
Board Platform : mt6765
Product Manfct : vivo

USERDATA : FILESYSTEM : EXT4 with FDE ( Full Disk Encryption **)

NVRAM : BBK_R0MP1_K62V1_64_BSP_MDBIN_PCB01_MT6765_S00.MOLY _LR12A_R3_MP_V136_6_P74
NVRAM : 0xB50AF66F
NVRAM : State : Ok!
INFO : WiFi MAC : 98C8B8BFA303
INFO : BlTh MAC : 98C8B8BFA302
INFO : IMEI[1] :
INFO : IMEI[2] :


Backup sensetive data [ 18 ]
Backup path : Backup\MT6765__161F7DB1684FEBADB4F5057F83BFABE2\
[29] Read : NVRAM
[8] Read : NVDATA
[19] Read : PROINFO
[30] Read : LK
[7] Read : NVCFG
[14] Read : PROTECT1
[1] Read : PGPT
[17] Read : PERSIST
[0] Read : PRELOADER
Backup done!


STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : UNLOCKED!
STORAGE : RPMB Status : eMMC : RPMB KEY PROGRAMMED [UNUSABLE]

PRELOADER : DEVICE :
DEV : MT6765
NME : preloader_k62v1_64_bsp.bin
CNT : 000F
EMI : [00] : eMMC : DDR3 : ID : 90014A484247346132 : VEN : HYNIX | DEV : HBG4a2 : RAM : [ 4.00 GB ]
EMI : [01] : eMMC : DDR3 : ID : 150100475036424D42 : VEN : SAMSUNG | DEV : GP6BMB : RAM : [ 3.00 GB ]
EMI : [02] : eMMC : LP_DDR4X : ID : 150100444836444142 : VEN : SAMSUNG | DEV : DH6DAB : RAM : [ 4.00 GB ]
EMI : [03] : eMMC : DDR3 : ID : 150100525036344D42 : VEN : SAMSUNG | DEV : RP64MB : RAM : [ 4.00 GB ]
EMI : [04] : eMMC : DDR3 : ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [05] : eMMC : DDR3 : ID : 90014A684339615033 : VEN : HYNIX | DEV : hC9aP3 : RAM : [ 4.00 GB ]
EMI : [06] : eMMC : DDR3 : ID : 150100475836424142 : VEN : SAMSUNG | DEV : GX6BAB : RAM : [ 3.00 GB ]
EMI : [07] : eMMC : LP_DDR4X : ID : 150100444436384D42 : VEN : SAMSUNG | DEV : DD68MB : RAM : [ 3.00 GB ]
EMI : [08] : eMMC : LP_DDR4X : ID : 90014A68433861503E : VEN : HYNIX | DEV : hC8aP> : RAM : [ 3.00 GB ]
EMI : [09] : eMMC : LP_DDR4X : ID : 13014E47314A395238 : VEN : MICRON | DEV : G1J9R8 : RAM : [ 4.00 GB ]
EMI : [0A] : eMMC : LP_DDR4X : ID : 150100445836384D42 : VEN : SAMSUNG | DEV : DX68MB : RAM : [ 3.00 GB ]
EMI : [0B] : eMMC : LP_DDR4X : ID : 13014E47314A395038 : VEN : MICRON | DEV : G1J9P8 : RAM : [ 3.00 GB ]
EMI : [0C] : eMMC : LP_DDR4X : ID : 90014A684339615033 : VEN : HYNIX | DEV : hC9aP3 : RAM : [ 4.00 GB ]
EMI : [0D] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX | DEV : hB8aP> : RAM : [ 3.00 GB ]
EMI : [0E] : eMMC : DDR3 : ID : 90014A68433861503E : VEN : HYNIX | DEV : hC8aP> : RAM : [ 3.00 GB ]
PRELOADER saved to : Backup\PRELOADER\preloader_k62v1_64_bsp.bin

Done!
Elapsed: 00:00:46

Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM28)
MODE : BOOTROM
PORT : 28
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 161F7DB1684FEBADB4F5057F83BFABE2
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : F13D14D52A290FD1AE76B5E62E5B3A02B64445EA47A7929D56 609DBA379B7E7B
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!

EMMC: CID : 150100525036344D42012A46E463B637
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 525036344D42 : PRV : 0x01
EMMC: VEN : SAMSUNG : RP64MB
EMMC: SNN : 709289059 ( 0x2A46E463 ) , MF : 11/2019

EMI : DEV : FireFly
EMI : SRC : preloader_k62v1_64_bsp.bin
EMI : CNT : 000F
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]

EMMC: CID : 150100525036344D42012A46E463B637
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 525036344D42 : PRV : 0x01
EMMC: VEN : SAMSUNG : RP64MB
EMMC: SNN : 709289059 ( 0x2A46E463 ) , MF : 11/2019

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 31558A59731CA9C5FDB0359AAE767AA2

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x835757

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!
Elapsed: 00:00:45

Reconnect Power/Cable!
  Reply With Quote
Old 04-04-2022, 07:54   #70527 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 8,252
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,345
Ravoz Z3Lite SPD9863 FRP/Pattren Reset Done With King Infinity CM2



Code:
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863A_eMMC_3GB_0S
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0008
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP

Reconnect Power/Cable!

Done!
Elapsed: 00:00:15
  Reply With Quote
Old 04-04-2022, 08:38   #70528 (permalink)
No Life Poster
 
Manikanika81's Avatar
 
Join Date: Feb 2019
Posts: 567
Member: 2897012
Status: Offline
Sonork: MTK81
Thanks Meter: 395
Klipad KL8889 Frp Lock Remove Done

Operation : Reset Settings [ v2.02 ]

----- > Phone/Tablet :
1. Power Off device
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable! Press 'POWER_ON' button for a few second!
----- > IoT/Box :
1. Reset device power
2. PRESS and HOLD 'RESET' KEY!
3. Insert OTG/USB cable! Press 'POWER_ON' button for a few second!

Wait for device ...
Device Connected!
Interface test : Passed
Device mode : 0x0006


SoC CPU : 3326

Flash CSx : 0x00
Flash Type : 4E414E44 [ NAND ]
Flash Vend : SAMSUNG
Flash Size : 0x000000039C000000 ( 14,44 GiB )
Flash Info : 524288/2048/40/0/1

Caps : 0x0011 : 0x0000

Connect Ok!

Remove FRP 0 ...
FRP removed!
Wiping UserData ...
Wipe DATA Ok!

Done!
Elapsed: 00:00:04
  Reply With Quote
Old 04-04-2022, 09:27   #70529 (permalink)
Junior Member
 
Join Date: Feb 2019
Posts: 4
Member: 2895770
Status: Offline
Thanks Meter: 0
vivo y33s with security february 2022 PD2147DF_EX_A_1.12.3
not connecting with cm2 2.34
  Reply With Quote
Old 04-04-2022, 10:09   #70530 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 8,252
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,345
Oppo CPH2015 FRP/Pattren Reset Done With King Infinity CM2



Code:
Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...


Device not found!
>>> Check cable, battery, connection and drivers!

Reconnect Power/Cable!


Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM119)
MODE : BOOTROM
PORT : 119
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : AF6E6CA822AAAE2C54832D84BD55424C
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : F2EEF03C6FCC38F86BEAC60B8ADFB67163ED92D7CEA056B975AF11B3D0450141
BROM : SLA : Local Auth 
BROM : SLA : Starting Auth 
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!

        EMMC: CID : 150100445836384D42099401CE448711
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 445836384D42 : PRV : 0x09
        EMMC: VEN : SAMSUNG : DX68MB
        EMMC: SNN : 2483146308 ( 0x9401CE44 ) , MF : 8/2020

     EMI : DEV : FireFly
     EMI : SRC : preloader_oppo6765.bin
     EMI : CNT : 000C
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0xC0000000 [ 3.00 GB ]

        EMMC: CID : 150100445836384D42099401CE448711
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 445836384D42 : PRV : 0x09
        EMMC: VEN : SAMSUNG : DX68MB
        EMMC: SNN : 2483146308 ( 0x9401CE44 ) , MF : 8/2020

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 953ADDFD5CE50844BEC061BB638505C9

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x825757

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA
Format Ok : USERDATA

Done!
Elapsed: 00:01:59

Reconnect Power/Cable!
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 17:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 11:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 09:03
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 20:17

 



All times are GMT +1. The time now is 01:56.



Powered by Searchlight © 2022 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2022 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.66428 seconds with 9 queries

SEO by vBSEO