GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 04-04-2022, 10:09   #70531 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 8,292
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,346
Oppo CPH2015 FRP/Pattren Reset Done With King Infinity CM2




Code:
Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...


Device not found!
>>> Check cable, battery, connection and drivers!

Reconnect Power/Cable!


Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM119)
MODE : BOOTROM
PORT : 119
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : AF6E6CA822AAAE2C54832D84BD55424C
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : F2EEF03C6FCC38F86BEAC60B8ADFB67163ED92D7CEA056B975AF11B3D0450141
BROM : SLA : Local Auth 
BROM : SLA : Starting Auth 
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!

        EMMC: CID : 150100445836384D42099401CE448711
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 445836384D42 : PRV : 0x09
        EMMC: VEN : SAMSUNG : DX68MB
        EMMC: SNN : 2483146308 ( 0x9401CE44 ) , MF : 8/2020

     EMI : DEV : FireFly
     EMI : SRC : preloader_oppo6765.bin
     EMI : CNT : 000C
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0xC0000000 [ 3.00 GB ]

        EMMC: CID : 150100445836384D42099401CE448711
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 445836384D42 : PRV : 0x09
        EMMC: VEN : SAMSUNG : DX68MB
        EMMC: SNN : 2483146308 ( 0x9401CE44 ) , MF : 8/2020

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 953ADDFD5CE50844BEC061BB638505C9

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x825757

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA
Format Ok : USERDATA

Done!
Elapsed: 00:01:59

Reconnect Power/Cable!
  Reply With Quote
Old 04-04-2022, 11:37   #70532 (permalink)
No Life Poster
 
Join Date: Aug 2020
Location: Mozambique
Age: 18
Posts: 647
Member: 2965136
Status: Online
Sonork: 58846
Thanks Meter: 754
Nokia TA-1342 SP Unlock Done

Code:
Card found : 46828B86 , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Identify [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mantis_00WW-user 11 RP1A.201005.001 V1.370_B01 release-keys
MemoryInfo : EMMC :  16 GB  ;  DRAM : 1 GB

Platform Version: MOCORTM_17C_W21.11.2_P4_Debug
Project Version:   pike2_pub
BASE  Version:    FM_BASE_17C_W21.11.2_P4
HW Version:        sc7731e_modem
CMP_Time : 08-24-2021 17:58:44

MODEM TAG : MOCORTM_17C_W21.11.2_P4_Debug_FM_BASE_17C_W21.11.2_P4_sc7731e_modem_pike2_pub


PSN1 : E6454841A2902827
PSN2 : E286655860BB0805175

NVMng  : SecurityInfo 
IMEI[1] : 350951863965380
IMEI[2] : 350951863965398
WIFIMAC : 44917C348333
BT_MAC  : 44917C348332
SEC : SLS:2, SKS:0, SKV:4


Done!
Elapsed: 00:00:29
Code:
Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mantis_00WW-user 11 RP1A.201005.001 V1.370_B01 release-keys
Platform Version: MOCORTM_17C_W21.11.2_P4_Debug
Project Version:   pike2_pub
BASE  Version:    FM_BASE_17C_W21.11.2_P4
HW Version:        sc7731e_modem
CMP_Time : 08-24-2021 17:58:44

MODEM TAG : MOCORTM_17C_W21.11.2_P4_Debug_FM_BASE_17C_W21.11.2_P4_sc7731e_modem_pike2_pub

NVMng  : SecurityInfo 
IMEI[1] : 350951863965380
IMEI[2] : 350951863965398
WIFIMAC : 44917C348333
BT_MAC  : 44917C348332
SEC : SLS:2, SKS:0, SKV:4

SLStatus : 2C
Status : Locked! Server unlock required!

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 15,  price:5
Process...
Finished

Unlocking device ... 
Sync data ... 
Device unlocked!

Done!
Elapsed: 00:00:49
  Reply With Quote
The Following 2 Users Say Thank You to tayobjoy1 For This Useful Post:
Old 04-04-2022, 11:55   #70533 (permalink)
Freak Poster
 
Join Date: Sep 2021
Location: Karoi , Zimbabwe 🇿
Age: 26
Posts: 261
Member: 2996196
Status: Offline
Thanks Meter: 199
Nokia ta 1342 sp unlock done by cm2 👋👏👋

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...


>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mantis_00WW-user 11 RP1A.201005.001 V1.230_B01 release-keys
Platform Version: MOCORTM_17C_W21.11.2_P3_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W21.11.2_P3
HW Version: sc7731e_modem
CMP_Time : 05-25-2021 21:34:06

MODEM TAG : MOCORTM_17C_W21.11.2_P3_Debug_FM_BASE_17C_W21.11.2 _P3_sc7731e_modem_pike2_pub

NVMng : SecurityInfo
IMEI[1] : 357735913894507
IMEI[2] : 357735913894515
WIFIMAC : 44917C0FA386
BT_MAC : 44917C0FA385
SEC : SLS:2, SKS:0, SKV:4

SLStatus : 2C
Status : Locked! Server unlock required!

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 5, price:5
Process...
Process : Operation may took 10-15 minutes!


>>> Repeat unlock/repair procedure after requested time again!

Reconnect Power/Cable!

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : Mantis_00WW-user 11 RP1A.201005.001 V1.230_B01 release-keys
Platform Version: MOCORTM_17C_W21.11.2_P3_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W21.11.2_P3
HW Version: sc7731e_modem
CMP_Time : 05-25-2021 21:34:06

MODEM TAG : MOCORTM_17C_W21.11.2_P3_Debug_FM_BASE_17C_W21.11.2 _P3_sc7731e_modem_pike2_pub

NVMng : SecurityInfo
IMEI[1] : 357735913894507
IMEI[2] : 357735913894515
WIFIMAC : 44917C0FA386
BT_MAC : 44917C0FA385
SEC : SLS:2, SKS:0, SKV:4

SLStatus : 2C
Status : Locked! Server unlock required!

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 0, price:5
Process...
Finished

Unlocking device ...
Sync data ...
Device unlocked!

Done!
Elapsed: 00:00:52
  Reply With Quote
The Following 2 Users Say Thank You to Jacobkamudyariw For This Useful Post:
Old 04-04-2022, 14:18   #70534 (permalink)
No Life Poster
 
GSM AR's Avatar
 
Join Date: Aug 2016
Posts: 759
Member: 2608490
Status: Online
Thanks Meter: 869
Tecno Spark 7 ( PR651 ) Identify / Reset Settings + FRP By CM2

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : PR651-F6317-11.0-OP-V043-20210729.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control transfered!

Boot Done!

Device info :
Product Brand : TECNO
Product Device : PR651
Product Model : TECNO PR651
Product Name : PR651
Patch Level : RP1A.201005.001
Display ID : PR651-F6317-11.0-OP-V043-20210729
Ver. Incmt : OP-V043-20210729
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2021-07-05
Build Time : 29.07.2021
Product Name : F6317
Product Device : TECNO-PR651
Product Info : PR651
Product Board : PR651
Board Platform : sp9863a
Product Manfct : TECNO


NVMng : SecurityInfo
IMEI[1] : 35908xxxxxxxxxxxx
IMEI[2] : 3590xxxxxxxxxxxxx
IMEI[3] : 8674xxxxxxxxxxxx

SEC : SLS:0, SKS:0, SKV:4

Platform Version: MOCORTM_20A_W21.15.3_P5_Debug
Project Version: sharkl3_pub
BASE Version: 4G_MODEM_20A_W21.15.3_P5
HW Version: sc9863A_modem
CMP_Time : 05-11-2021 10:59:41

MODEM TAG : MOCORTM_20A_W21.15.3_P5_Debug_4G_MODEM_20A_W21.15. 3_P5_sc9863A_modem_sharkl3_pub

USERDATA : FILESYSTEM : F2FS with FBE ( File-Base Encryption )

- > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:00:46

Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : PR651-F6317-11.0-OP-V043-20210729.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP

Reconnect Power/Cable!

Done!
Elapsed: 00:01:03
  Reply With Quote
The Following User Says Thank You to GSM AR For This Useful Post:
Old 04-05-2022, 06:18   #70535 (permalink)
No Life Poster
 
Nadeem Waris's Avatar
 
Join Date: Jul 2009
Location: SINDH PAKISTAN
Posts: 7,080
Member: 1080718
Status: Offline
Sonork: 100.1596539 QQ-2710826805
Thanks Meter: 2,228
kgtel format done

Operation : Format FileSystem [ v1.07 ]

1. Power off device
2. Not hold any key on device!
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

Format FFS Done!

Done!
Elapsed: 00:00:16

Reconnect Power/Cable!
  Reply With Quote
Old 04-05-2022, 07:47   #70536 (permalink)
Freak Poster
 
Join Date: Sep 2021
Location: Karoi , Zimbabwe 🇿
Age: 26
Posts: 261
Member: 2996196
Status: Offline
Thanks Meter: 199
Arrow 3 by tecno sa2s pop 2 mini sp unlock done by cm2 👏👋👏

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : SA2S-SA215D-8.1-ZA-Voda-LC-V034-20210823
Platform Version: MOCORTM_17C_W18.31.2_P30_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.31.2_P30
HW Version: sc7731e_modem
CMP_Time : 09-24-2020 11:12:04

MODEM TAG : MOCORTM_17C_W18.31.2_P30_Debug_FM_BASE_17C_W18.31. 2_P30_sc7731e_modem_pike2_pub

NVMng : SecurityInfo
IMEI[1] : 867400020316612
IMEI[2] : 867400020316620
WIFIMAC : 000000000000
BT_MAC : 000000000000
SEC : SLS:0, SKS:0, SKV:3

SLStatus : 31
Unlocking device ...
Sync data ...
Device unlocked!

Done!
Elapsed: 00:00:29



Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : SA2S-SA215D-8.1-ZA-Voda-LC-V027-20201125
Platform Version: MOCORTM_17C_W18.31.2_P30_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.31.2_P30
HW Version: sc7731e_modem
CMP_Time : 09-24-2020 11:12:04

MODEM TAG : MOCORTM_17C_W18.31.2_P30_Debug_FM_BASE_17C_W18.31. 2_P30_sc7731e_modem_pike2_pub

NVMng : SecurityInfo
IMEI[1] : 353013107673507
IMEI[2] : 354648020000004
WIFIMAC : 1C87E33E6050
BT_MAC : 1C87E33E604F
SEC : SLS:0, SKS:0, SKV:3

SLStatus : 31
Unlocking device ...
Sync data ...
Device unlocked!

Done!
Elapsed: 00:00:46

Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : SA2S-SA215D-8.1-ZA-Voda-LC-V027-20201125
Platform Version: MOCORTM_17C_W18.31.2_P30_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.31.2_P30
HW Version: sc7731e_modem
CMP_Time : 09-24-2020 11:12:04

MODEM TAG : MOCORTM_17C_W18.31.2_P30_Debug_FM_BASE_17C_W18.31. 2_P30_sc7731e_modem_pike2_pub

NVMng : SecurityInfo
IMEI[1] : 353013107688885
IMEI[2] : 354648020000004
WIFIMAC : 1C87E33E550E
BT_MAC : 1C87E33E550D
SEC : SLS:0, SKS:0, SKV:3

SLStatus : 31
Unlocking device ...
Sync data ...
Device unlocked!

Done!
Elapsed: 00:00:27
  Reply With Quote
The Following User Says Thank You to Jacobkamudyariw For This Useful Post:
Old 04-05-2022, 09:52   #70537 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 8,292
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,346
Tecno Sprek 6 MT6768 FRP/Pattren Reset Done With King Infinity CM2



Code:
Card found : A19EC787 , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34

Load IDBase v312457 Ok!

UserName and/or Password not set! Can't continue!

Load IDBase v312457 Ok!

Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM119)
MODE : BOOTROM
PORT : 119
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Talbot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 5965196BA5BAF2F2072B90406557DA95
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 74CE7A2B01D23486700B0CF8B3EE40C4A7D556512D9791DED05F6489C172255C
BROM : SLA : Local Auth 
BROM : SLA : Starting Auth 
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : TECNO : RAPHAEL_V2 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA_V2.bin
AGENT : Found MT6768
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!

        EMMC: CID : 90014A68433961503301005C6D5287E1
        EMMC: VEN : HYNIX : OEM : 74 : ID : 684339615033 : PRV : 0x01
        EMMC: VEN : HYNIX : hC9aP3
        EMMC: SNN : 6057298 ( 0x005C6D52 ) , MF : 8/2020

     EMI : DEV : FireFly
     EMI : SRC : 
     EMI : CNT : 000D
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00070000 [ 448.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : 90014A68433961503301005C6D5287E1
        EMMC: VEN : HYNIX : OEM : 74 : ID : 684339615033 : PRV : 0x01
        EMMC: VEN : HYNIX : hC9aP3
        EMMC: SNN : 6057298 ( 0x005C6D52 ) , MF : 8/2020

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0001 , EVOL : 0x0000

        RNID : FB430CD23405E769E4459200469446E5

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x825657

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA
Format Ok : USERDATA

Done!
Elapsed: 00:01:12

Reconnect Power/Cable!
  Reply With Quote
Old 04-05-2022, 14:26   #70538 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Sindh Pakistan
Posts: 8,591
Member: 953334
Status: Online
Sonork: 100.1614005
Thanks Meter: 15,346
Smile Oppo A15 Cph2185 Smart Reset DOne

Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : E599DC526010DC60DA1F9BC786238CE4
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : D776D6E5E1DB8F9B15E335550B7E8B7C07ED955C9EDEFDCF6B A0588386C72FCF
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!

EMMC: CID : 90014A68423861503E0300016926C7FD
EMMC: VEN : HYNIX : OEM : 74 : ID : 68423861503E : PRV : 0x03
EMMC: VEN : HYNIX : hB8aP>
EMMC: SNN : 92454 ( 0x00016926 ) , MF : 12/2020

EMI : DEV : FireFly
EMI : SRC : preloader_oppo6765.bin
EMI : CNT : 000B
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: CID : 90014A68423861503E0300016926C7FD
EMMC: VEN : HYNIX : OEM : 74 : ID : 68423861503E : PRV : 0x03
EMMC: VEN : HYNIX : hB8aP>
EMMC: SNN : 92454 ( 0x00016926 ) , MF : 12/2020

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 59D6FAD6616F6F72A1713BFC8E931917

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x825757

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA
Format Ok : USERDATA

Done!
Elapsed: 00:00:54

Reconnect Power/Cable!
  Reply With Quote
Old 04-06-2022, 06:41   #70539 (permalink)
No Life Poster
 
shuric's Avatar
 
Join Date: Feb 2007
Location: Mongolia
Posts: 991
Member: 444532
Status: Offline
Sonork: 100.1576960
Thanks Meter: 211
LG LM-X510L FRP remove OK. Thanks team.

Operation : Reset Settings/Format FS [ v2.34 ]

Mode : FRP [ RESET PROTECTION ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : LGE Mobile USB Serial Port (COM7)
MODE : PRELOADER PORT
PORT : 7
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x02
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : Reset Interface!
PTFN : MediaTek USB Port (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN [RAPHAEL]
BROM : MEID : D1EB71F3E89E73A7D547FD841A054D78
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x00000001
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!

EMI : DEV : FireFly
EMI : SRC : preloader_muse6750_lv7v_o.bin
EMI : CNT : 0006
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00038000 [ 224,00 KB ]
DRAM: 0x80000000 [ 2,00 GB ]

EMMC: CID : 150100515831334D4207D245D0EB7513
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 515831334D42 : PRV : 0x07
EMMC: VEN : SAMSUNG : QX13MB
EMMC: SNN : 3527790827 ( 0xD245D0EB ) , MF : 7/2018

EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x747C00000 [ 29,12 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : BDDD9E9EF2EB7C153D384993E8714DFC

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM5)
MODE : PRELOADER PORT
PORT : 5

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:01:55

Reconnect Power/Cable!
  Reply With Quote
Old 04-06-2022, 06:42   #70540 (permalink)
No Life Poster
 
shuric's Avatar
 
Join Date: Feb 2007
Location: Mongolia
Posts: 991
Member: 444532
Status: Offline
Sonork: 100.1576960
Thanks Meter: 211
LG LM-X510L FRP remove OK

LG LM-X510L FRP remove OK. Thanks team.

Operation : Reset Settings/Format FS [ v2.34 ]

Mode : FRP [ RESET PROTECTION ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : LGE Mobile USB Serial Port (COM7)
MODE : PRELOADER PORT
PORT : 7
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x02
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : Reset Interface!
PTFN : MediaTek USB Port (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN [RAPHAEL]
BROM : MEID : D1EB71F3E89E73A7D547FD841A054D78
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x00000001
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!

EMI : DEV : FireFly
EMI : SRC : preloader_muse6750_lv7v_o.bin
EMI : CNT : 0006
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00038000 [ 224,00 KB ]
DRAM: 0x80000000 [ 2,00 GB ]

EMMC: CID : 150100515831334D4207D245D0EB7513
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 515831334D42 : PRV : 0x07
EMMC: VEN : SAMSUNG : QX13MB
EMMC: SNN : 3527790827 ( 0xD245D0EB ) , MF : 7/2018

EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x747C00000 [ 29,12 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : BDDD9E9EF2EB7C153D384993E8714DFC

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM5)
MODE : PRELOADER PORT
PORT : 5

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:01:55

Reconnect Power/Cable!
  Reply With Quote
Old 04-06-2022, 07:23   #70541 (permalink)
No Life Poster
 
Join Date: Mar 2011
Location: Faisalabad
Posts: 1,325
Member: 1527968
Status: Offline
Sonork: 100.1651182
Thanks Meter: 437
oppo a54 pin unlock without data loss don

Card found : 0DA21111 , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34

Load IDBase v312457 Ok!

Update configuration ...
Load IDBase v312457 Ok!

Operation : Identify [ v2.34 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM42)
MODE : BOOTROM
PORT : 42
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 62442002110768095FF1AB51AAFF8973
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 386042DFBD066C26C9D40750CFC9BECA2279EA7904EC96FAB4 75BFA68EC61C9D
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!

EMMC: CID : 13014E47314A3953391017113C94A897
EMMC: VEN : MICRON : OEM : 78 : ID : 47314A395339 : PRV : 0x10
EMMC: VEN : MICRON : G1J9S9
EMMC: SNN : 387005588 ( 0x17113C94 ) , MF : 10/2021

EMI : DEV : FireFly
EMI : SRC : preloader_oppo6765.bin
EMI : CNT : 0006
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]

EMMC: CID : 13014E47314A3953391017113C94A897
EMMC: VEN : MICRON : OEM : 78 : ID : 47314A395339 : PRV : 0x10
EMMC: VEN : MICRON : G1J9S9
EMMC: SNN : 387005588 ( 0x17113C94 ) , MF : 10/2021

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x1D1F000000 [ 116.48 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 815953A95FAE349D199CBCFE8B0FCAE8

DA : USB : HIGH-SPEED

Boot done!

Patch Level : QP1A.190711.020
Display ID : QP1A.190711.020 release-keys
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2021-08-05
Build Time : 17.08.2021
Product Info : oppo6765

Device UID : MT6765__CPH2239_11_A.11_210817_2745cfb0

USERDATA : FILESYSTEM : EXT4 with FBE ( File-Base Encryption )

NVRAM : OPPO6765_20361_MDBIN_PCB01_MT6765_S00.MOLY_LR12A_R 2_TC16_Q_G35_PR1_SP_V2_P204
NVRAM : 0xAB105294
NVRAM : State : Ok!
INFO : WiFi MAC : 9C7403E61F2B
INFO : BlTh MAC : 9C7403E61F2A


Backup sensetive data [ 18 ]
Backup path : Backup\MT6765__62442002110768095FF1AB51AAFF8973\
[31] Read : NVRAM
[14] Read : NVDATA
[22] Read : PROINFO
[36] Read : LK
[13] Read : NVCFG
[17] Read : PROTECT1
[1] Read : PGPT
[20] Read : PERSIST
[0] Read : PRELOADER
[7] Read : OPPORESERVE3
[8] Read : OPPO_CUSTOM
Backup done!


STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : UNLOCKED!
STORAGE : RPMB Status : eMMC : RPMB KEY PROGRAMMED [UNUSABLE]

Done!
Elapsed: 00:00:50

Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET DATA SAFE

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM42)
MODE : BOOTROM
PORT : 42
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 62442002110768095FF1AB51AAFF8973
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 386042DFBD066C26C9D40750CFC9BECA2279EA7904EC96FAB4 75BFA68EC61C9D
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!

EMMC: CID : 13014E47314A3953391017113C94A897
EMMC: VEN : MICRON : OEM : 78 : ID : 47314A395339 : PRV : 0x10
EMMC: VEN : MICRON : G1J9S9
EMMC: SNN : 387005588 ( 0x17113C94 ) , MF : 10/2021

EMI : DEV : FireFly
EMI : SRC : preloader_oppo6765.bin
EMI : CNT : 0006
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]

EMMC: CID : 13014E47314A3953391017113C94A897
EMMC: VEN : MICRON : OEM : 78 : ID : 47314A395339 : PRV : 0x10
EMMC: VEN : MICRON : G1J9S9
EMMC: SNN : 387005588 ( 0x17113C94 ) , MF : 10/2021

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x1D1F000000 [ 116.48 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 815953A95FAE349D199CBCFE8B0FCAE8

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x825757

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM73)
MODE : PRELOADER PORT
PORT : 73
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : Reset Interface!
PTFN : MediaTek USB Port (COM42)
MODE : BOOTROM
PORT : 42
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 62442002110768095FF1AB51AAFF8973
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 386042DFBD066C26C9D40750CFC9BECA2279EA7904EC96FAB4 75BFA68EC61C9D
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!

EMMC: CID : 13014E47314A3953391017113C94A897
EMMC: VEN : MICRON : OEM : 78 : ID : 47314A395339 : PRV : 0x10
EMMC: VEN : MICRON : G1J9S9
EMMC: SNN : 387005588 ( 0x17113C94 ) , MF : 10/2021

EMI : DEV : FireFly
EMI : SRC : preloader_oppo6765.bin
EMI : CNT : 0006
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]

EMMC: CID : 13014E47314A3953391017113C94A897
EMMC: VEN : MICRON : OEM : 78 : ID : 47314A395339 : PRV : 0x10
EMMC: VEN : MICRON : G1J9S9
EMMC: SNN : 387005588 ( 0x17113C94 ) , MF : 10/2021

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x1D1F000000 [ 116.48 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 815953A95FAE349D199CBCFE8B0FCAE8

DA : USB : HIGH-SPEED

Boot done!

SafeFormat Ok!

Done!
Elapsed: 00:01:15

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to alimobile279 For This Useful Post:
Old 04-06-2022, 08:14   #70542 (permalink)
Junior Member
 
Join Date: Jul 2019
Location: bangladesh
Posts: 1
Member: 2920367
Status: Offline
Thanks Meter: 0
Card found : 35F11D50 , v0152
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : k150-user 9 PPR1.180610.011 00WW_1_13A release-keys
Platform Version: MOCORTM_17C_W18.41.3_P26.03_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.41.3_P26.03
HW Version: sc7731e_modem
CMP_Time : 11-19-2019 14:05:07

MODEM TAG : MOCORTM_17C_W18.41.3_P26.03_Debug_FM_BASE_17C_W18. 41.3_P26.03_sc7731e_modem_pike2_pub

NVMng : SecurityInfo
IMEI[1] : 359598693766685
IMEI[2] : 359598693830689
WIFIMAC : 748A28649A8E
BT_MAC : 748A2864B38E
SEC : SLS:2, SKS:0, SKV:4

SLStatus : 2C
Status : Locked! Server unlock required!

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 5, price:5
Process...
Finished

Unlocking device ...
Sync data ...
Device unlocked!

Done!
Elapsed: 00:00:26
  Reply With Quote
Old 04-06-2022, 08:20   #70543 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 4,934
Member: 2644066
Status: Offline
Thanks Meter: 1,737
Calme cl100 reset frp done by cm2

Card found : 73CA70CC , v0153
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.07

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]


Operation : Format FileSystem [ v1.07 ]

1. Power off device
2. Not hold any key on device!
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

Format FFS Done!

Done!
Elapsed: 00:00:19

Reconnect Power/Cable!
  Reply With Quote
Old 04-06-2022, 08:29   #70544 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 4,934
Member: 2644066
Status: Offline
Thanks Meter: 1,737
Maxx g2 reset password done by cm2

Card found : 73CA70CC , v0153
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.07

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]


SPRD mode : SC6531 : REV : E000 : NOR : [ 4MB ]

Operation : Format FileSystem [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_035 B940CF947_NVM.nv

Executing FormatFFS ...
Format FFS Done!

Done!
Elapsed: 00:00:19

Reconnect Power/Cable!
  Reply With Quote
Old 04-06-2022, 08:31   #70545 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 4,934
Member: 2644066
Status: Offline
Thanks Meter: 1,737
Vgotel i251 hang on logo done by cm2

Card found : 73CA70CC , v0153
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.07

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]


SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]

Operation : Format FileSystem [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v2.0 (c)2019
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_036 959A70F24_NVM.nv

Executing FormatFFS ...
Format FFS Done!

Done!
Elapsed: 00:00:20

Reconnect Power/Cable!
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 17:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 11:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 09:03
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 20:17

 



All times are GMT +1. The time now is 15:20.



Powered by Searchlight © 2022 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2022 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.70416 seconds with 9 queries

SEO by vBSEO