GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box
Reload this Page Successfully unlocked/repaired phones by Infinity-Box
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source


Reply
Page 4747 of 5073 « First 37474247464746974737474447454746 4747 474847494750475747974847 Last »
 
LinkBack Thread Tools Display Modes
Old 06-05-2022, 13:32   #71191 (permalink)
No Life Poster
 
Nadeem Waris's Avatar
 
Join Date: Jul 2009
Location: SINDH PAKISTAN
Posts: 7,462
Member: 1080718
Status: Offline
Sonork: 100.1596539 QQ-2710826805
Thanks Meter: 2,247
Alcatel pixi 4 read ffw done

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 8127
BB_CPU_NME : [MediaTek] MT8127_S00
BB_CPU_EXT : 0xCA03 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8D
NAND Flash : NOT INSTALLED
eMMC Flash : 8801034E436172642043821AB72F83CD
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E436172642043821AB72F83CD
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID : 0x033C5217DDBC8AF36FD24D2DD3E5CEE2
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand : alps
ProdName : full_kr070
ProdModel : kr070
Device : kr070
AndroidVer: 6.0
MTKxCPU : MT8127
MTKxPRJ : alps-mp-m0.mp8-V1.27_tpw8127.e_P2

[Read Ok] : preloader_kr070.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : custom.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT8127 / V1.1.2 / kr070 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 2842 MiB
Scatter saved to : C:\Users\Warisgsm\Desktop\MT8127__alps__kr070__kr0 70__6.0__alps-mp-m0.mp8-V1.27_tpw8127.e_P2\

All done!

Done!
Elapsed: 00:15:32
Reconnect Power/Cable!
  Reply With Quote
Old 06-05-2022, 13:33   #71192 (permalink)
No Life Poster
 
Nadeem Waris's Avatar
 
Join Date: Jul 2009
Location: SINDH PAKISTAN
Posts: 7,462
Member: 1080718
Status: Offline
Sonork: 100.1596539 QQ-2710826805
Thanks Meter: 2,247
Alcatel poici4 flash done
Scatter Load Ok , BaseBand : MT8127 , Project : kr070 , Storage : EMMC
Files found : 15 , Set to Flash : 14
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : alps
Device Model : kr070
Device CPU : MT8127
Device IntName : full_kr070
Device Version : 6.0
Device Compile : 1/13/2017 4:04:08 PM
Device Project : alps-mp-m0.mp8-V1.27_tpw8127.e_P2
Device ExtInfo : kr070
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 8127
BB_CPU_NME : [MediaTek] MT8127_S00
BB_CPU_EXT : 0xCA03 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8D
NAND Flash : NOT INSTALLED
eMMC Flash : 8801034E436172642043821AB72F83CD
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E436172642043821AB72F83CD
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID : 0x033C5217DDBC8AF36FD24D2DD3E5CEE2
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT8127 , Project : kr070 , Storage : EMMC
Setting : Flash Pre-Erase : Off ( Write Flash Only )
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Skip checking by User request!

BL : BatteryLevel : Unknown (not supported or without battery)

SecCfg Passed , 1799
BMT remark not need. Will skip

Preloader Download skipped by user request!
PartCount : 0019
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : EBR2
Image Flash Ok
Flash now : CUSTOM
Image Flash Ok
Flash now : TEE1
Image Flash Ok
Flash now : TEE2
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash Write Done, time used : 00:15:54

Processing : Verify
Verify Passed : MBR
Verify Passed : EBR1
Verify Passed : UBOOT
Verify Passed : BOOTIMG
Verify Passed : RECOVERY
Verify Passed : SEC_RO
Verify Passed : LOGO
Verify Passed : EBR2
Verify Passed : CUSTOM
Verify Passed : TEE1
Verify Passed : TEE2
Verify Passed : ANDROID
Verify Passed : CACHE
Verify Passed : USRDATA
Data Verify Done, time used : 00:01:42

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:17:54
Reconnect Power/Cable!
  Reply With Quote
Old 06-05-2022, 13:37   #71193 (permalink)
No Life Poster
 
Nadeem Waris's Avatar
 
Join Date: Jul 2009
Location: SINDH PAKISTAN
Posts: 7,462
Member: 1080718
Status: Offline
Sonork: 100.1596539 QQ-2710826805
Thanks Meter: 2,247
Alcatel pici 4 wifi 7 frp remove done
Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 8127
BB_CPU_NME : [MediaTek] MT8127_S00
BB_CPU_EXT : 0xCA03 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8D
NAND Flash : NOT INSTALLED
eMMC Flash : 8801034E436172642043821AB72F83CD
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E436172642043821AB72F83CD
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID : 0x033C5217DDBC8AF36FD24D2DD3E5CEE2
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!

Done!
Elapsed: 00:00:13
Reconnect Power/Cable!
  Reply With Quote
Old 06-06-2022, 05:53   #71194 (permalink)
No Life Poster
 
Nadeem Waris's Avatar
 
Join Date: Jul 2009
Location: SINDH PAKISTAN
Posts: 7,462
Member: 1080718
Status: Offline
Sonork: 100.1596539 QQ-2710826805
Thanks Meter: 2,247
voice v105 format done
Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 30 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : D82099A0BC61FB71EE0032A6D1A40A76
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , [MXIC] MX25L3291FWJI_09
[0] : FLASH_DIE : 00C2 0020 0016 0000
[0] : FLASH_LEN : 0x00300000
SDS_INFO : 0x002FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

Backup done
Executing FFS FORMAT now...
FAT_RANGE : 0x002A0000-0x002FDFFF , LEN : 0x0005E000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE

Done!
Elapsed: 00:00:10
Reconnect Power/Cable!
  Reply With Quote
Old 06-06-2022, 06:22   #71195 (permalink)
No Life Poster
 
Nadeem Waris's Avatar
 
Join Date: Jul 2009
Location: SINDH PAKISTAN
Posts: 7,462
Member: 1080718
Status: Offline
Sonork: 100.1596539 QQ-2710826805
Thanks Meter: 2,247
Realme c2 smart reset done
Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM30)
MODE : BOOTROM
PORT : 30
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 38ABE62A8B71CDA11FA38CD681671C48
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 7329E65FAEBD352FD2C8D139E0FF64A58A7C020615ED70E4DF 1CAF15C38FA7BF
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!

EMMC: CID : 150100474436424D42017E2B682A564F
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 474436424D42 : PRV : 0x01
EMMC: VEN : SAMSUNG : GD6BMB
EMMC: SNN : 2116773930 ( 0x7E2B682A ) , MF : 5/2019

EMI : DEV : FireFly
EMI : SRC : preloader_oppo6762_18540.bin
EMI : CNT : 0009
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: CID : 150100474436424D42017E2B682A564F
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 474436424D42 : PRV : 0x01
EMMC: VEN : SAMSUNG : GD6BMB
EMMC: SNN : 2116773930 ( 0x7E2B682A ) , MF : 5/2019

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 86CE65CF6D8C0ECE81596B29B85F89D4

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x815757

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!
Elapsed: 00:00:33

Reconnect Power/Cable!
  Reply With Quote
Old 06-06-2022, 06:25   #71196 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 8,670
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,368
OLA One Plus MT6580 FRP/Pattren Reset Done With King Infinity CM2


Code:
Card found : S/N : A19EC787 , v0153
Chinese Miracle II  [MTK module] v 1.58

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 25 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 110100303136473730000CC7D0EDA219
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 07G61
[eMMC] : FLASH_CID : 110100303136473730000CC7D0EDA219
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
DEV RID    : 0xD9C8F395032A3846E15E575371AF1DC2
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!
Clear DIN
Clear Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:53
Reconnect Power/Cable!
  Reply With Quote
Old 06-06-2022, 06:29   #71197 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,789
Member: 2644066
Status: Offline
Thanks Meter: 1,773
Vgo tell i12 reset password done by cm2
Card found : S/N : 73CA70CC , v0153
Chinese Miracle II [MTK module] v 1.58

Operation : Reset UserCode [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 6 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : C5A631D4D97F9B3C6AD56EA5BF034D82
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00ED , [GigaDevice] GD25LQ64
[0] : FLASH_DIE : 00C8 0060 0017 0000
[0] : FLASH_LEN : 0x00800000
SDS_INFO : 0x007FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

Backup done
Read ExtData
Sorting ExtData
Sort Ok, Rebuild Ok
Restore ExtData
All done
UserCode request removed
UserCode set to default ( 0000 or 1122 )

Done!
Elapsed: 00:00:18
Reconnect Power/Cable!
  Reply With Quote
Old 06-06-2022, 06:51   #71198 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 8,670
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,368
Redmi 9c MT6765 FRP/Pattren Reset Done With King Infinity CM2


Code:
Card found : A19EC787 , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34

Load IDBase v312457 Ok!

UserName and/or Password not set! Can't continue!

Load IDBase v312457 Ok!

Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM69)
MODE : BOOTROM
PORT : 69
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 3C7AF5E0A73F7B6CE858576E9D5F8A21
BROM : SecLevel : 0x000000E7
BROM : SecMode  : SBC+SLA+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : E0EBC97DA61D631530BD0F3B50F8D92E2FE62C7225703E237A4B731C8A265621
BROM : SLA : Local Auth 
BROM : SLA : Starting Auth 
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!

        EMMC: CID : 150100434A5444345204877253ACA765
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 434A54443452 : PRV : 0x04
        EMMC: VEN : SAMSUNG : CJTD4R
        EMMC: SNN : 2272416684 ( 0x877253AC ) , MF : 10/2020

     EMI : DEV : FireFly
     EMI : SRC : preloader_k65v1_64_bsp.bin
     EMI : CNT : 000B
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0xC0000000 [ 3.00 GB ]

        EMMC: CID : 150100434A5444345204877253ACA765
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 434A54443452 : PRV : 0x04
        EMMC: VEN : SAMSUNG : CJTD4R
        EMMC: SNN : 2272416684 ( 0x877253AC ) , MF : 10/2020

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 9CF3ADBC37A3842EDACF3F989B950DB

DA : USB : HIGH-SPEED

Boot done!
SmartInfo : 0x825657

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA
Format Ok : USERDATA

Done!
Elapsed: 00:00:36

Reconnect Power/Cable!
  Reply With Quote
Old 06-06-2022, 07:03   #71199 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,789
Member: 2644066
Status: Offline
Thanks Meter: 1,773
Samsung galaxy a22 5g reset frp done by cm2
Card found : 73CA70CC , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34

Load IDBase v312457 Ok!

Update configuration ...
Load IDBase v312457 Ok!

Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET EXTRA

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM29)
MODE : PRELOADER PORT
PORT : 29
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6833 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Palmer
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6833
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : Reset Interface!
PTFN : MediaTek USB Port (COM28)
MODE : BOOTROM
PORT : 28
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6833 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Palmer
TYPE : MODERN [RAPHAEL]
BROM : MEID : 4C05125ACD936CBDD7710474F17086C1
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 132E8D4123EE91C0B18A9D69B6977487D7A0B2E6A2A417C0FF C704E1AA4D78A5
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6833
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_s96801aa1.bin
EMI : CNT : 0008
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00070000 [ 448.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]

EMMC: CID : 15010033563643414200B735D4A83807
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 335636434142
EMMC: VEN : SAMSUNG : 3V6CAB
EMMC: SNN : 3073758376 ( 0xB735D4A8) , MF : 3/2021

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x1D1F000000 [ 116.48 GB ]

CHIP : MT6833 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0001 , EVOL : 0x0000

RNID : B2F0DEE4E4CF47F446E6C8E2B000AD18

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x835757

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA
Format Ok : Vendor Extra

Done!
Elapsed: 00:00:30
  Reply With Quote
Old 06-06-2022, 07:30   #71200 (permalink)
Registered User
 
Join Date: Aug 2016
Location: Multan Pakistan
Posts: 787
Member: 2608490
Status: Offline
Thanks Meter: 921
Thumbs up vivo Y12s / V2026 / PD2036DF Dead Recovered Done By CM2
Chinese Miracle II : MediaTek Service Module
Created by Infinity-Box (c) 2022
Creation time : 2022/02/11
Module version : 2.33
Device Info file : _Android_info.txt

Product Brand : vivo
Product Device : 2026
Product Model : V2026
Product Name : 2026
Patch Level : RP1A.200720.012
Display ID : RP1A.200720.012 release-keys
Product Info : k65v1_64_bsp
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2021-11-01
Build Time : 01.12.2021
Product Board : k65v1_64_bsp
Board Platform : mt6765
Product Manfct : vivo

Preloader [HW DEV] Info :
EMI : DEV : MT6765
EMI : SRC : preloader_k65v1_64_bsp.bin
EMI : CNT : 0009
EMI : [00] : eMMC : LP_DDR4X : ID : 150100445836384D42 : VEN : SAMSUNG | DEV : DX68MB : RAM : [ 3.00 GB ]
EMI : [01] : eMMC : LP_DDR4X : ID : 13014E47314A395339 : VEN : MICRON | DEV : G1J9S9 : RAM : [ 4.00 GB ]
EMI : [02] : eMMC : LP_DDR4X : ID : 150100445636444D42 : VEN : SAMSUNG | DEV : DV6DMB : RAM : [ 4.00 GB ]
EMI : [03] : eMMC : LP_DDR4X : ID : 150100444436384D42 : VEN : SAMSUNG | DEV : DD68MB : RAM : [ 3.00 GB ]
EMI : [04] : eMMC : LP_DDR4X : ID : 150100444836444142 : VEN : SAMSUNG | DEV : DH6DAB : RAM : [ 4.00 GB ]
EMI : [05] : eMMC : LP_DDR4X : ID : 90014A684339615033 : VEN : HYNIX | DEV : hC9aP3 : RAM : [ 4.00 GB ]
EMI : [06] : eMMC : LP_DDR4X : ID : 150100445636444142 : VEN : SAMSUNG | DEV : DV6DAB : RAM : [ 4.00 GB ]
EMI : [07] : eMMC : LP_DDR4X : ID : 150100445036444142 : VEN : SAMSUNG | DEV : DP6DAB : RAM : [ 4.00 GB ]
EMI : [08] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3.00 GB ]

Operation : Write Flash [ v2.34 ]

Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Disabled
Safe UserData : Disabled
Flash Format : Disabled

Files :26
[FL] : Set : preloader_k65v1_64_bsp.bin
[FL] : Set : recovery.img
[FL] : Set : vbmeta_system.img
[FL] : Set : vbmeta_vendor.img
[FL] : Set : survival.img
[FL] : Set : reserved.img
[FL] : Set : cust.img
[FL] : Set : vgc.img
[FL] : Set : efuse.img
[FL] : Set : md1rom.img
[FL] : Set : spmfw.img
[FL] : Set : tinysys-scp.bin
[FL] : Set : tinysys-scp.bin
[FL] : Set : sspm.img
[FL] : Set : sspm.img
[FL] : Set : lk.bin
[FL] : Set : lk.bin
[FL] : Set : boot.img
[FL] : Set : logo.bin
[FL] : Set : dtbo.img
[FL] : Set : tz.img
[FL] : Set : tz.img
[FL] : Set : super.img
[FL] : Set : vbmeta.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0x15E477624 [ 5.47 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM42)
MODE : PRELOADER PORT
PORT : 42
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : Reset Interface!
PTFN : MediaTek USB Port_V1632 (COM7)
MODE : BOOTROM
PORT : 7
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : A2644BBA5276F45B13E34984924D6E78
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : F7B06067B733E8D22905C2AFEE518D0B463A5E95EA9CBC82D2 FDE18CF5C96393
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!

EMMC: CID : 150100445836384D42095060CA242815
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 445836384D42 : PRV : 0x09
EMMC: VEN : SAMSUNG : DX68MB
EMMC: SNN : 1348520484 ( 0x5060CA24 ) , MF : 2/2021

EMI : DEV : MT6765
EMI : SRC : preloader_k65v1_64_bsp.bin
EMI : CNT : 0009
EMI : [00] : eMMC : LP_DDR4X : ID : 150100445836384D42 : VEN : SAMSUNG | DEV : DX68MB : RAM : [ 3.00 GB ]
EMI : [01] : eMMC : LP_DDR4X : ID : 13014E47314A395339 : VEN : MICRON | DEV : G1J9S9 : RAM : [ 4.00 GB ]
EMI : [02] : eMMC : LP_DDR4X : ID : 150100445636444D42 : VEN : SAMSUNG | DEV : DV6DMB : RAM : [ 4.00 GB ]
EMI : [03] : eMMC : LP_DDR4X : ID : 150100444436384D42 : VEN : SAMSUNG | DEV : DD68MB : RAM : [ 3.00 GB ]
EMI : [04] : eMMC : LP_DDR4X : ID : 150100444836444142 : VEN : SAMSUNG | DEV : DH6DAB : RAM : [ 4.00 GB ]
EMI : [05] : eMMC : LP_DDR4X : ID : 90014A684339615033 : VEN : HYNIX | DEV : hC9aP3 : RAM : [ 4.00 GB ]
EMI : [06] : eMMC : LP_DDR4X : ID : 150100445636444142 : VEN : SAMSUNG | DEV : DV6DAB : RAM : [ 4.00 GB ]
EMI : [07] : eMMC : LP_DDR4X : ID : 150100445036444142 : VEN : SAMSUNG | DEV : DP6DAB : RAM : [ 4.00 GB ]
EMI : [08] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: CID : 150100445836384D42095060CA242815
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 445836384D42 : PRV : 0x09
EMMC: VEN : SAMSUNG : DX68MB
EMMC: SNN : 1348520484 ( 0x5060CA24 ) , MF : 2/2021

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 9104B6B85A0BB4A8400451D1B76ACBB

DA : USB : HIGH-SPEED

Boot done!

[FL] : HW verification passed!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : Pre-Erase
Erase : 0x0000000000000000 : 0x0000000008688000
Erase : 0x000000000A688000 : 0x0000000004000000
Erase : 0x000000000F088000 : 0x0000000017200000
Erase : 0x000000002A288000 : 0x000000000769A000
Erase : 0x0000000033000000 : 0x0000000000800000
Erase : 0x0000000036800000 : 0x0000000000200000
Erase : 0x0000000036D00000 : 0x0000000008980000
Erase : 0x0000000043680000 : 0x0000000260980000

[FL] : RePartition
[FL] : RePartition Ok!


[FL] : Flashing now ...

Write : PRELOADER
Update bootloader backup copy ...
Update bootloader backup copy Ok!
Write : RECOVERY
Write : VBMETA_SYSTEM
Write : VBMETA_VENDOR
Write : SURVIVAL
Write : RESERVED
Write : CUST
Write : VGC
Write : EFUSE
Write : MD1IMG
Write : SPMFW
Write : SCP1
Write : SCP2
Write : SSPM_1
Write : SSPM_2
Write : LK
Write : LK2
Write : BOOT
Write : LOGO
Write : DTBO
Write : TEE1
Write : TEE2
Write : SUPER
Write : VBMETA
Write : CACHE
Write : USERDATA

UltraFlash : OK!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : RePartition
[FL] : RePartition Ok!

[FL] : Flashing finished!

Done!
Elapsed: 00:04:01

Reconnect Power/Cable!
  Reply With Quote
The Following 2 Users Say Thank You to GSM AR For This Useful Post:
Old 06-06-2022, 10:47   #71201 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 8,670
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,368
Vivo Y91 MT6765 FRP/Pattren Reset Done With King Infinity CM2


Code:
Card found : A19EC787 , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34

Load IDBase v312457 Ok!

UserName and/or Password not set! Can't continue!

Load IDBase v312457 Ok!

Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM12)
MODE : BOOTROM
PORT : 12
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
     CODE : Merlot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : EC67DCC04F28CB28EF99B9C211B257A9
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 14ED1832438EE8F72CB98E281ADDD2A8E8955C1A09DD1DFA714C7BDA4916652B
BROM : SLA : Local Auth 
BROM : SLA : Starting Auth 
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!

        EMMC: CID : 150100514436334D4201B51BF259A629
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 514436334D42 : PRV : 0x01
        EMMC: VEN : SAMSUNG : QD63MB
        EMMC: SNN : 3038507609 ( 0xB51BF259 ) , MF : 10/2019

     EMI : DEV : FireFly
     EMI : SRC : preloader_k61v1_64_bsp.bin
     EMI : CNT : 0006
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A400 [ 233.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID : 150100514436334D4201B51BF259A629
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 514436334D42 : PRV : 0x01
        EMMC: VEN : SAMSUNG : QD63MB
        EMMC: SNN : 3038507609 ( 0xB51BF259 ) , MF : 10/2019

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 26AE8C92CFAE87D1ECE7AC121FF8A50D

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x805757

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!
Elapsed: 00:00:55

Reconnect Power/Cable!
  Reply With Quote
Old 06-06-2022, 10:52   #71202 (permalink)
No Life Poster
 
azhergoga007's Avatar
 
Join Date: Jan 2011
Location: lullipapi
Posts: 8,670
Member: 1489030
Status: Offline
Sonork: 100.1649409
Thanks Meter: 5,368
Qmobile Qtab V9 Lite MT6735 FRP/Pattren Reset Done With King Infinity CM2


Code:
Card found : S/N : A19EC787 , v0153
Chinese Miracle II  [MTK module] v 1.58

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 14 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 42F301F34E55524110B903201BD9656F
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xF3 , OEM : 01F3
[eMMC] : FLASH_INF : [NOT_IN_BASE] , NURA
[eMMC] : FLASH_CID : F301F3424152554E2003B9106F65141B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001CCD80000
[eMMC] : FLASH_UCP : 7373 MiB [eMMC 8 GiB]
DEV RID    : 0xD9C8F39588C54C7634D87410473841F4
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!
Clear DIN
Clear Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:41
Reconnect Power/Cable!
  Reply With Quote
Old 06-06-2022, 10:57   #71203 (permalink)
No Life Poster
 
Tanha0321's Avatar
 
Join Date: Jul 2006
Location: Pakistan karachi
Posts: 9,753
Member: 314003
Status: Offline
Thanks Meter: 2,999
Nicklaus Format & Frp
Code:
Display ID     : LLD31C2.1.0.1.9T39A1205_
Patch Level    : NMF26O
Display ID     : full_nicklaus-userdebug 7.1.1 NMF26O 1512448634 test-keys
Ver. CodeName  : REL
Ver. Release   : 7.1.1
Sec. Patch     : 2017-02-05
Build Time     : 05.12.2017
Product Model  : nicklaus
Product Brand  : alps
Product Name   : full_nicklaus
Product Device : nicklaus
Product Manfct : alps
Board Platform : mt6737m
Product Info   : nicklaus

USERDATA : FILESYSTEM : EXT4  with FDE ( Full Disk Encryption *)

NVRAM : 0x153069680
NVRAM : State : Ok!
INFO  : WiFi MAC : 5C5188F46971
INFO  : BlTh MAC : 5C5188F467EB
INFO  : IMEI[1] : 
INFO  : IMEI[2] : 


Done!
Elapsed: 00:00:19

Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM4)
MODE : PRELOADER PORT
PORT : 4
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000
     TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN
BROM : BROM|BL  : 0xFF|0x01
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6735
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 150100524531424D4207CA9CF02F0BAD
DAInf: 4 : 2 : 155
     DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

        EMMC: CID : 150100524531424D4207CA9CF02FC3AD
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 524531424D42 : PRV : 0x07
        EMMC: VEN : SAMSUNG : RE1BMB
        EMMC: SNN : 3399282735 ( 0xCA9CF02F ) , MF : 12/2016

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3A3E00000 [ 14.56 GB ]

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0xC0000000 [ 3.00 GB ]

        CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 2DF26BB4F76A7FCA2E99BEF521AA561B

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x8F5454

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!
Elapsed: 00:00:40

Reconnect Power/Cable!
  Reply With Quote
Old 06-06-2022, 10:58   #71204 (permalink)
No Life Poster
 
Tanha0321's Avatar
 
Join Date: Jul 2006
Location: Pakistan karachi
Posts: 9,753
Member: 314003
Status: Offline
Thanks Meter: 2,999
QMobile X30 Flash
Code:
Brand     : TINNO
ProdName  : QMobile X30
ProdModel : QMobile X30
Device    : QMobile X30
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1

Done!
Elapsed: 00:00:23
Reconnect Power/Cable!


Scatter Load Ok , BaseBand : MT6572 , Project : s4050ap , Storage : EMMC
Files found : 11 , Set to Flash : 10
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 30 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A48344732611101D777F23562F3
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A48344732611101D777F23562F3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xD5229C25C382E611EF76B8ECC50E699A
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6572 , Project : s4050ap , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify :  Disabled
Setting : HW verify :  Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 3883 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000C00000-0x0000000000100000
Erase : 0x0000000002900000-0x00000000E5E00000
Flash Pre-Erase Done, time used : 00:00:04

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ... 
Use : preloader_s4050ap.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0012
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash Write Done, time used : 00:02:53


Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:03:21
Reconnect Power/Cable!
  Reply With Quote
Old 06-06-2022, 10:58   #71205 (permalink)
No Life Poster
 
Tanha0321's Avatar
 
Join Date: Jul 2006
Location: Pakistan karachi
Posts: 9,753
Member: 314003
Status: Offline
Thanks Meter: 2,999
Vivo V2026 Frp
Code:
Product Brand  : vivo
Product Device : 2026
Product Model  : V2026
Product Name   : 2026
Patch Level    : RP1A.200720.012
Display ID     : RP1A.200720.012 release-keys
Product Info   : k65v1_64_bsp
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2022-03-01
Build Time     : 07.03.2022
Product Board  : k65v1_64_bsp
Board Platform : mt6765
Product Manfct : vivo

USERDATA : FILESYSTEM : EXT4  with FBE ( File-Base Encryption )

NVRAM : BBK_R0MP1_K65V1_64_BSP_MDBIN_PCB01_MT6765_S00.MOLY_LR12A_R3_MP_V136_6_P96
NVRAM : 0xB61250C6
NVRAM : State : Ok!
INFO  : WiFi MAC : AA0036004400
INFO  : BlTh MAC : 9C828118F688
INFO  : IMEI[1] : 
INFO  : IMEI[2] : 


STORAGE : Life Status : eMMC : NOT implemented in selected DA!
STORAGE : OTP Status : NOT Enabled!
STORAGE : RPMB Status : eMMC : RPMB  KEY PROGRAMMED [UNUSABLE]

Done!
Elapsed: 00:00:30

Operation : Reset Settings/Format FS [ v2.34 ]

Mode : FRP [ RESET PROTECTION ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM4)
MODE : PRELOADER PORT
PORT : 4
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
BROM : Enforcing BootROM
BROM : Enforcing Failed! Skip!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : BROM|BL  : 0xFF|0x03
BROM : PRELOADER PORT
AGENT : Vivo : SEC_MT6765 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x30000000 [ 768.00 MB ]

        EMMC: CID : 90014A68423861503E0300A0D14BC74F
        EMMC: VEN : HYNIX : OEM : 74 : ID : 68423861503E : PRV : 0x03
        EMMC: VEN : HYNIX : hB8aP>
        EMMC: SNN : 10539339 ( 0x00A0D14B ) , MF : 12/2020

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : E2A9C59ABB38B22A1C1E420E573B214A

DA : USB : HIGH-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:18

Reconnect Power/Cable!
  Reply With Quote
Reply
Page 4747 of 5073 « First 37474247464746974737474447454746 4747 474847494750475747974847 Last »

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 17:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 11:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 09:03
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 20:17

 



All times are GMT +1. The time now is 15:34.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.82341 seconds with 10 queries

SEO by vBSEO