Successfully unlocked/repaired phones by Infinity-Box - Page 4931 - GSM-Forum

Tanha0321 · 05-18-2023, 11:27

Code:

Product Brand  : Itel
Product Device : L6503
Product Model  : itel L6503
Product Name   : L6503
Patch Level    : QP1A.190711.020
Display ID     : L6503-F6315-10.0-OP-V044-20220328
Ver. Incmt     : OP-V044-20220328
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2022-04-05
Build Time     : 28.03.2022
Product Name   : F6315
Product Device : itel-L6503
Product Info   : L6503
Product Board  : L6503
Board Platform : sp9863a
Product Manfct : itel


NVMng  : SecurityInfo 
IMEI[1] : 
IMEI[2] : 
IMEI[3] : 

SEC : SLS:0, SKS:0, SKV:4

USERDATA : FILESYSTEM : F2FS  with FDE ( Full Disk Encryption ***)

 - > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:01:11

Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : L6503-F6315
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0008
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ... 
FDL : SEC : RSA auth passed!
FDL : Control transfered!

Boot Done!

Wipe Ok : FRP

Reconnect Power/Cable!

Done!
Elapsed: 00:00:29

Tanha0321 · 05-18-2023, 11:29

Code:

  SW : TECNO/BC1s-OP/TECNO-BC1s:10/QP1A.190711.020/AB-OP-220510V016:user/release-keys
  Product Brand: TECNO
  Product Model: TECNO BC1s
  Product Name: BC1s-OP
  Product Device: TECNO-BC1s
  Product Board: BC1s
  Patch Level: QP1A.190711.020
  Display ID: BC1s-VQ653AB-QGo-OP-220510V016
  SW Version: AB-OP-220510V016
  Ver. CodeName: REL
  Ver. Release: 10
  Sec. Patch: 2022-05-05
  Build Time: 18/05/2022 9:14:27 am
  CPU : armeabi-v7a,armeabi
  Product Info: k39tv1_bsp
  SW : full_k39tv1_bsp-user 10 QP1A.190711.020 1652865291 release-keys
  Product Board: k39tv1_bsp
  Board Platform: mt6739
  Product Manfct: TECNO MOBILE LIMITED
Strategy: 7 [none]
Firmware ID: MT6739_TECNO_MOBILE_LIMITED_TECNO_BC1s_10_BC1s-VQ653AB-QGo-OP-220510V016_QP1A.190711.020_k39tv1_bsp
Verify firmware [MT6739_TECNO_MOBILE_LIMITED_TECNO_BC1s_10_BC1s-VQ653AB-QGo-OP-220510V016_QP1A.190711.020_k39tv1_bsp]...
Firmware is unknown
Please upload file https://infinity-box.com/?r=100020

userData : fileSystem : [f2fs]  with FBE ( file based encryption )

NVRAM: VQ653_BC1S_MDBIN_PCB01_MT6739_S00.MOLY_LR12A_R3_MP_V114_9_P10
NVRAM: Items: 0x9F Size: 0x08B7A7 State: Ok
  WiFi MAC: AA0036004400
  BlTh MAC: 58356B94B95A
  IMEI[1]: 
  IMEI[2]: 

Verify device config...
Ok
Loaders Ok

STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : NOT Enabled!
STORAGE : RPMB Status : eMMC : RPMB  KEY NOT PROGRAMMED [USABLE]

Scan preloader...
EMI: MT6739 preloader_k39tv1_bsp.bin with 3 memory type(s)
  1. eMMC DDR3 ID: 150100515836334142   Ven: Samsung   | Dev: QX63AB RAM: 2.00 Gb
  2. eMMC DDR3 ID: 700100474D424D4541   Ven: Kingston  | Dev: GMBMEA RAM: 2.00 Gb
  3. eMMC DDR3 ID: 150100514436334D42   Ven: Samsung   | Dev: QD63MB RAM: 2.00 Gb
Preloader saved: C:\InfinityBox\CM2MT2\backup\preloader\preloader_k39tv1_bsp.bin
Verify C:\InfinityBox\CM2MT2\backup\preloader\preloader_k39tv1_bsp.bin [06dd0d7d]...
Exist
Done: 00:00:39
Reconnect Power/Cable now

Load: D:\China File\Tacno\BC1s-VQ653AB-QGo-OP-220510V016\BC1s-VQ653AB-QGo-OP-220510V016\MT6739_Android_scatter.txt
Preloader [HW DEV]:
EMI: MT6739 preloader_k39tv1_bsp.bin with 3 memory type(s)
  1. eMMC DDR3 ID: 150100515836334142   Ven: Samsung   | Dev: QX63AB RAM: 2.00 Gb
  2. eMMC DDR3 ID: 700100474D424D4541   Ven: Kingston  | Dev: GMBMEA RAM: 2.00 Gb
  3. eMMC DDR3 ID: 150100514436334D42   Ven: Samsung   | Dev: QD63MB RAM: 2.00 Gb


Operation: Write Flash [ v2.43a8 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Wait...
[+] Update PMT [re-Part]
[-] Checksum Verify
[+] Safe Erase [Upgrade]
[+] Check compatibility
[-] Backup
[-] UserData Safe
[-] FLASH ERASE

Files: 21
[FL]: D:\China File\Tacno\BC1s-VQ653AB-QGo-OP-220510V016\BC1s-VQ653AB-QGo-OP-220510V016\
  Set: preloader_k39tv1_bsp.bin
  Set: recovery.img
  Set: vbmeta.img
  Set: vbmeta_system.img
  Set: vbmeta_vendor.img
  Set: md1img-verified.img
  Set: md1dsp-verified.img
  Set: spmfw-verified.img
  Set: mcupmfw-verified.img
  Set: lk-verified.img
  Set: lk-verified.img
  Set: loader_ext-verified.img
  Set: loader_ext-verified.img
  Set: boot.img
  Set: logo-verified.bin
  Set: dtbo-verified.img
  Set: tee-verified.img
  Set: tee-verified.img
  Set: super.img
  Set: cache.img
  Set: userdata.img
[FL]: Total size: 0xBB33F318 [ 2.93 Gb ]

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device  [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM_V1632 (Android) (COM5)
MODE[0]: PRELOADER PORT; PORT: 5
Waiting BOOT ACK...
PRELOADER: ACK Ok
BROM: Init...
  Init passed
MODE[0]
CHIP: MT6739 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0002 EVOL: 0x0000 HWC: 0x0699
  CODE: Zion
  TYPE: MODERN  [RAPHAEL]
BROM: Sec Level: 0x00000005 Mode: SBC+SDA
  VER: 0xFF BL: 0x03 [PRELOADER PORT]
AGENT: AUTO: 0_base: base_v2216
  [3365c4d2] C:\InfinityBox\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
  [06dd0d7d] D:\China File\Tacno\BC1s-VQ653AB-QGo-OP-220510V016\BC1s-VQ653AB-QGo-OP-220510V016\preloader_k39tv1_bsp.bin
Looking for suitable BootChain in DA...
Found MT6739
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
  Reset Interface
PTFN: MediaTek USB Port_V1632 (COM4)
MODE[0]: BOOTROM; PORT: 4
Waiting BOOT ACK...
BROM: Skip ACK verify
BROM: Init...
  Init passed
MODE[0]
CHIP: MT6739 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0002 EVOL: 0x0000 HWC: 0x0699
  CODE: Zion
  TYPE: MODERN  [RAPHAEL]
  MEID: 53FDF241AB10A0865BFBE54EFAF944FD
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
  VER: 0x05 BL: 0xFE [BOOTROM]
  SOCID: 918FC2C0F806CDBAF955B0C08090E15DA26B41EFB716CBC307EF6EB853CE0AA8
  SLA: Local Auth
  SLA: Starting Auth
  SLA: Continue Auth
  SLA: Auth Passed; SEC: 0x000000E0
AGENT: AUTO: 0_base: base_v2216
  [3365c4d2] C:\InfinityBox\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
  [06dd0d7d] D:\China File\Tacno\BC1s-VQ653AB-QGo-OP-220510V016\BC1s-VQ653AB-QGo-OP-220510V016\preloader_k39tv1_bsp.bin
Looking for suitable BootChain in DA...
Found MT6739
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
  DA sent
  Transfer control to DA...
DA: AGENT started
DA: SYNC
  MODE: BROM
  EXT_RAM NOT initialized


EMI: Init via preloader_k39tv1_bsp.bin
EMI: Init Ok
EMI: MT6739 preloader_k39tv1_bsp.bin with 3 memory type(s)
  1. eMMC DDR3 ID: 150100515836334142   Ven: Samsung   | Dev: QX63AB RAM: 2.00 Gb
  2. eMMC DDR3 ID: 700100474D424D4541   Ven: Kingston  | Dev: GMBMEA RAM: 2.00 Gb
  3. eMMC DDR3 ID: 150100514436334D42   Ven: Samsung   | Dev: QD63MB RAM: 2.00 Gb
EMI: EXT_RAM CFG Passed
DA: Boot to 2nd DA...
  2nd stage confirmed
DA: SYNC passed

Load HW info...
SRAM: 0x00020000 [ 128.00 Kb ]
DRAM: 0x80000000 [ 2.00 Gb ]

EMMC CID: 150100515836334142030C2EF491285D
  VEN: Samsung OEM: 0 ID: 515836334142 [QX63AB] PRV: 0x03
  SNN: 204403857 [0x0C2EF491]
  MM/YY: 2/2021
  BOOT1: 0x00400000 [ 4.00 Mb ]
  BOOT2: 0x00400000 [ 4.00 Mb ]
  RPMB: 0x00400000 [ 4.00 Mb ]
  USER: 0x747C00000 [ 29.12 Gb ]

CHIP: MT6739 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0699
  CODE: Zion
  TYPE: MODERN  [RAPHAEL]
  RNID: 4B48D18AEB05C1EF476F888D0AB4E056
  MEID: 53FDF241AB10A0865BFBE54EFAF944FD

USB: HIGH-SPEED
Boot done [1]

[FL]: HW verification passed

Reading... Ok
Verify device config...
Ok
Loaders Ok

[FL]: Pre-Erase
Erase: 0x0000000000000000 0x0000000004688000
Erase: 0x0000000004E88000 0x000000000569A000
Erase: 0x000000000B800000 0x0000000000800000
Erase: 0x000000000F000000 0x0000000000200000
Erase: 0x000000000F500000 0x0000000007200000
Erase: 0x0000000016C00000 0x0000000000200000
Erase: 0x0000000016E20000 0x00000001929E0000

[FL]: RePartition
[FL]: RePartition Ok

[FL]: Flashing now...
Write: PRELOADER
Update bootloader backup copy... Ok
Write: RECOVERY Ok
Write: VBMETA Ok
Write: VBMETA_SYSTEM Ok
Write: VBMETA_VENDOR Ok
Write: MD1IMG Ok
Write: MD1DSP Ok
Write: SPMFW Ok
Write: MCUPMFW Ok
Write: LK Ok
Write: LK2 Ok
Write: LOADER_EXT1 Ok
Write: LOADER_EXT2 Ok
Write: BOOT Ok
Write: LOGO Ok
Write: DTBO Ok
Write: TEE1 Ok
Write: TEE2 Ok
Write: SUPER Ok
Write: CACHE Ok
Write: USERDATA Ok

[FL]: RePartition
[FL]: RePartition Ok

[FL]: Flashing finished
Done: 00:02:35
Reconnect Power/Cable now

Tanha0321 · 05-18-2023, 11:30

Code:

  Patch Level: PPR1.180610.011
  Display ID: BB4k-H6114UVW-PGo-210705V127
  SW Version: UVW-210705V127
  Ver. CodeName: REL
  Ver. Release: 9
  Sec. Patch: 2021-07-05
  Build Time: 05/07/2021 11:11:03 am
  Product Model: TECNO BB4k
  Product Brand: TECNO
  Product Name: H6114
  Product Device: TECNO-BB4k
  CPU : armeabi-v7a,armeabi
  Product Manfct: TECNO MOBILE LIMITED
  Product Info: bb4k_h6114
  SW : full_bb4k_h6114-user 9 PPR1.180610.011 126306 release-keys
  Product Board: TECNO-BB4k
  Board Platform: mt6761
Strategy: 7 [none]
Firmware ID: MT6761_TECNO_MOBILE_LIMITED_TECNO_BB4k_9_BB4k-H6114UVW-PGo-210705V127_PPR1.180610.011_bb4k_h6114
Verify firmware [MT6761_TECNO_MOBILE_LIMITED_TECNO_BB4k_9_BB4k-H6114UVW-PGo-210705V127_PPR1.180610.011_bb4k_h6114]...
Firmware is unknown
Please upload file https://infinity-box.com/?r=100020

userData : fileSystem : [f2fs]  with FDE ( forced fde or fbe )

NVRAM: TK_MD_BASIC_MDBIN_PCB01_MT6761_S00.MOLY_LR12A_R3_MP_V75_5_P15
NVRAM: Items: 0xA3 Size: 0x1019A8 State: Ok
  WiFi MAC: AA0036004400
  BlTh MAC: 9056FC991C4A
  IMEI[1]: 
  IMEI[2]: 

Verify device config...
Ok
Loaders Ok

STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : UNLOCKED!
STORAGE : RPMB Status : eMMC : RPMB  KEY NOT PROGRAMMED [USABLE]

Scan preloader...
EMI: MT6761 preloader_bb4k_h6114.bin with 13 memory type(s)
  1. eMMC DDR3 ID: 90014A68423861503E   Ven: Hynix     | Dev: hB8aP> RAM: 3.00 Gb
  2. eMMC DDR3 ID: FE014A333232344433   Ven: Micron    | Dev: 3224D3 RAM: 3.00 Gb
  3. eMMC DDR3 ID: 90014A484347386134   Ven: Hynix     | Dev: HCG8a4 RAM: 4.00 Gb
  4. eMMC DDR3 ID: 150100514536334D42   Ven: Samsung   | Dev: QE63MB RAM: 2.00 Gb
  5. eMMC DDR3 ID: 150100464536324D42   Ven: Samsung   | Dev: FE62MB RAM: 1.00 Gb
  6. eMMC DDR3 ID: 90014A484147346132   Ven: Hynix     | Dev: HAG4a2 RAM: 2.00 Gb
  7. eMMC DDR3 ID: 150100514436334D42   Ven: Samsung   | Dev: QD63MB RAM: 2.00 Gb
  8. eMMC DDR3 ID: 90014A68423861503E   Ven: Hynix     | Dev: hB8aP> RAM: 2.00 Gb
  9. eMMC DDR3 ID: 700100464D42434541   Ven: Kingston  | Dev: FMBCEA RAM: 2.00 Gb
  10. eMMC DDR3 ID: 150100524836344142   Ven: Samsung   | Dev: RH64AB RAM: 4.00 Gb
  11. eMMC DDR3 ID: 700100464D41454538   Ven: Kingston  | Dev: FMAEE8 RAM: 1.00 Gb
  12. eMMC DDR3 ID: 150100474436424D42   Ven: Samsung   | Dev: GD6BMB RAM: 3.00 Gb
  13. eMMC DDR3 ID: 150100515836334142   Ven: Samsung   | Dev: QX63AB RAM: 2.00 Gb
Preloader saved: C:\InfinityBox\CM2MT2\backup\preloader\preloader_bb4k_h6114.bin
Verify C:\InfinityBox\CM2MT2\backup\preloader\preloader_bb4k_h6114.bin [42e58220]...
Exist
Done: 00:00:36
Reconnect Power/Cable now

Reset Mode: Safe (OnDevice-Like) reset by device requirements: UserData + FRP

Operation: Reset Settings/Format FS [ v2.43a8 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Format: SMART RESET
Wait...
WARNING: Format FS WILL RESET ALL USER DATA! 
Make sure about correct format mode selection!
Continue? Yes
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device  [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek USB Port_V1632 (COM90)
MODE[0]: BOOTROM; PORT: 90
Waiting BOOT ACK...
BROM: Skip ACK verify
BROM: Init...
  Init passed
MODE[0]
CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717
  CODE: Merlot
  TYPE: MODERN  [RAPHAEL]
  MEID: 58F5EEA4B0B7ED65B8708334C5A55ABF
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
  VER: 0x05 BL: 0xFE [BOOTROM]
  SOCID: 9C4CB5E71993F4E3BC2CE65CF04CEBB7423E4F55FF0ADE5FBDF3EB687C0A8186
  SLA: Local Auth
  SLA: Starting Auth
  SLA: Continue Auth
  SLA: Auth Passed; SEC: 0x000000E0
AGENT: AUTO: 0_base: base_v2216
  [3365c4d2] C:\InfinityBox\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6761
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
  DA sent
  Transfer control to DA...
DA: AGENT started
DA: SYNC
  MODE: BROM
  EXT_RAM NOT initialized

EMMC CID: 90014A68423861503E0397AB51D2B681
  VEN: Hynix OEM: 74 ID: 68423861503E [hB8aP>] PRV: 0x03
  SNN: 2544587218 [0x97AB51D2]
  MM/YY: 11/2019

EMI: Init Ok
EMI: FireFly preloader_bb4k_h6114.bin with 13 memory type(s)
  1. eMMC DDR3 ID: 90014A68423861503E   Ven: Hynix     | Dev: hB8aP> RAM: 3.00 Gb
  2. eMMC DDR3 ID: FE014A333232344433   Ven: Micron    | Dev: 3224D3 RAM: 3.00 Gb
  3. eMMC DDR3 ID: 90014A484347386134   Ven: Hynix     | Dev: HCG8a4 RAM: 4.00 Gb
  4. eMMC DDR3 ID: 150100514536334D42   Ven: Samsung   | Dev: QE63MB RAM: 2.00 Gb
  5. eMMC DDR3 ID: 150100464536324D42   Ven: Samsung   | Dev: FE62MB RAM: 1.00 Gb
  6. eMMC DDR3 ID: 90014A484147346132   Ven: Hynix     | Dev: HAG4a2 RAM: 2.00 Gb
  7. eMMC DDR3 ID: 150100514436334D42   Ven: Samsung   | Dev: QD63MB RAM: 2.00 Gb
  8. eMMC DDR3 ID: 90014A68423861503E   Ven: Hynix     | Dev: hB8aP> RAM: 2.00 Gb
  9. eMMC DDR3 ID: 700100464D42434541   Ven: Kingston  | Dev: FMBCEA RAM: 2.00 Gb
  10. eMMC DDR3 ID: 150100524836344142   Ven: Samsung   | Dev: RH64AB RAM: 4.00 Gb
  11. eMMC DDR3 ID: 700100464D41454538   Ven: Kingston  | Dev: FMAEE8 RAM: 1.00 Gb
  12. eMMC DDR3 ID: 150100474436424D42   Ven: Samsung   | Dev: GD6BMB RAM: 3.00 Gb
  13. eMMC DDR3 ID: 150100515836334142   Ven: Samsung   | Dev: QX63AB RAM: 2.00 Gb
EMI: EXT_RAM CFG Passed
DA: Boot to 2nd DA...
  2nd stage confirmed
DA: SYNC passed

Load HW info...
SRAM: 0x0003A500 [ 233.25 Kb ]
DRAM: 0x80000000 [ 2.00 Gb ]

EMMC CID: 90014A68423861503E0397AB51D2B681
  VEN: Hynix OEM: 74 ID: 68423861503E [hB8aP>] PRV: 0x03
  SNN: 2544587218 [0x97AB51D2]
  MM/YY: 11/2019
  BOOT1: 0x00400000 [ 4.00 Mb ]
  BOOT2: 0x00400000 [ 4.00 Mb ]
  RPMB: 0x01000000 [ 16.00 Mb ]
  USER: 0x747C00000 [ 29.12 Gb ]

CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0717
  CODE: Merlot
  TYPE: MODERN  [RAPHAEL]
  RNID: 22F780FB7E617BB6264944ABA9D5F198
  MEID: 58F5EEA4B0B7ED65B8708334C5A55ABF

USB: HIGH-SPEED
Boot done [1]

Reading... Ok
SmartInfo: AndroidVer: 9 UserDataFS: 0x03 [f2fs] CacheFS: 0x02 [ext4|8+]
Strategy: 7 [none]

Verify device config...
Ok
Loaders Ok

[1] Process: RESET PROTECTION... Ok
[2] Process: USERDATA... Ok
[3] Process: CACHE... Ok
[4] Verified
[5] Verified
[6] Process: USERDATA... Ok
[7] Verified
[1] Verified
[2] Verified
Done: 00:00:31
Reconnect Power/Cable now

Tanha0321 · 05-18-2023, 11:32

Code:

  Patch Level: PPR1.180610.011
  Ver. CodeName: REL
  Ver. Release: 9
  Sec. Patch: 2021-05-05
  CPU : arm64-v8a,armeabi-v7a,armeabi
  CPU : armeabi-v7a,armeabi
  CPU : arm64-v8a
  Product Manfct: Realme
  SW : full_oppo6762_18540-user 9 PPR1.180610.011 eng.root.20210508.122048 release-keys
  Build Time: 08/05/2021 4:23:54 am
  Product Brand: Realme
  Product Model: RMX1941
  Product Info: RMX1941
  Product Name: RMX1941
  Product Device: RMX1941
  SW OTA Version: RMX1941EX_11.A.34_0340_202105081158
  Display ID: RMX1941EX_11_A.34
  Kernel Info: 4.9.117
Strategy: 5 [oppo]
Firmware ID: MT6765__RMX1941EX_11_A.12_190617_c80b7906
Verify firmware [MT6765__RMX1941EX_11_A.12_190617_c80b7906]...
Firmware is unknown
Please upload file https://infinity-box.com/?r=100020

userData : fileSystem [ext4]  with FBE ( file based encryption )

NVRAM: OPPO6762_18540_MDBIN_PCB01_MT6765_S00.MOLY_LR12A_R2_PIE_P22_PR2_TC16_SP_V1_P18
NVRAM: Items: 0xA6 Size: 0x08C30F State: Ok
  WiFi MAC: 705E557F0793
  BlTh MAC: 705E557F0792

Verify device config...
Ok
Loaders Ok

STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : UNLOCKED!
STORAGE : RPMB Status : eMMC : RPMB  KEY PROGRAMMED [UNUSABLE]

Scan preloader...
EMI: MT6765 preloader_oppo6762_18540.bin with 9 memory type(s)
  1. eMMC DDR3 ID: 150100515836334142   Ven: Samsung   | Dev: QX63AB RAM: 2.00 Gb
  2. eMMC DDR3 ID: 90014A68423861503E   Ven: Hynix     | Dev: hB8aP> RAM: 3.00 Gb
  3. eMMC DDR3 ID: 90014A484147346132   Ven: Hynix     | Dev: HAG4a2 RAM: 2.00 Gb
  4. eMMC DDR3 ID: 13014E53304A394237   Ven: Micron    | Dev: S0J9B7 RAM: 3.00 Gb
  5. eMMC DDR3 ID: 150100514536334D42   Ven: Samsung   | Dev: QE63MB RAM: 2.00 Gb
  6. eMMC DDR3 ID: 90014A68423861503E   Ven: Hynix     | Dev: hB8aP> RAM: 2.00 Gb
  7. eMMC DDR3 ID: 150100475036424D42   Ven: Samsung   | Dev: GP6BMB RAM: 3.00 Gb
  8. eMMC DDR3 ID: 150100514436334D42   Ven: Samsung   | Dev: QD63MB RAM: 2.00 Gb
  9. eMMC DDR3 ID: 150100474436424D42   Ven: Samsung   | Dev: GD6BMB RAM: 3.00 Gb
Preloader exist: C:\InfinityBox\CM2MT2\backup\preloader\preloader_oppo6762_18540.bin
Verify C:\InfinityBox\CM2MT2\backup\preloader\preloader_oppo6762_18540.bin [84e8c68e]...
Exist
Done: 00:00:30
Reconnect Power/Cable now


Operation: Reset Settings/Format FS [ v2.43a8 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Format: SMART RESET
Wait...
WARNING: Format FS WILL RESET ALL USER DATA! 
Make sure about correct format mode selection!
Continue? Yes
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device  [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek USB Port (COM4)
MODE[0]: BOOTROM; PORT: 4
Waiting BOOT ACK...
BROM: Skip ACK verify
BROM: Init...
  Init passed
MODE[0]
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
  CODE: Cervino
  TYPE: MODERN  [RAPHAEL]
  MEID: 8C6AEDCB943AA0EEFD46B2D1BA224ACB
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
  VER: 0x05 BL: 0xFE [BOOTROM]
  SOCID: 1ACE69E0E860C0E9DEF64466E1959AB3FB96CB3778606D0E17B8D89BFF286E48
  SLA: Local Auth
  SLA: Starting Auth
  SLA: Continue Auth
  SLA: Auth Passed; SEC: 0x000000E0
AGENT: AUTO: 0_base: base_v2216
  [3365c4d2] C:\InfinityBox\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6765
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
  DA sent
  Transfer control to DA...
DA: AGENT started
DA: SYNC
  MODE: BROM
  EXT_RAM NOT initialized

EMMC CID: 150100474436424D4201E486962A5617
  VEN: Samsung OEM: 0 ID: 474436424D42 [GD6BMB] PRV: 0x01
  SNN: 3834025514 [0xE486962A]
  MM/YY: 5/2019

EMI: Init Ok
EMI: FireFly preloader_oppo6762_18540.bin with 9 memory type(s)
  1. eMMC DDR3 ID: 150100515836334142   Ven: Samsung   | Dev: QX63AB RAM: 2.00 Gb
  2. eMMC DDR3 ID: 90014A68423861503E   Ven: Hynix     | Dev: hB8aP> RAM: 3.00 Gb
  3. eMMC DDR3 ID: 90014A484147346132   Ven: Hynix     | Dev: HAG4a2 RAM: 2.00 Gb
  4. eMMC DDR3 ID: 13014E53304A394237   Ven: Micron    | Dev: S0J9B7 RAM: 3.00 Gb
  5. eMMC DDR3 ID: 150100514536334D42   Ven: Samsung   | Dev: QE63MB RAM: 2.00 Gb
  6. eMMC DDR3 ID: 90014A68423861503E   Ven: Hynix     | Dev: hB8aP> RAM: 2.00 Gb
  7. eMMC DDR3 ID: 150100475036424D42   Ven: Samsung   | Dev: GP6BMB RAM: 3.00 Gb
  8. eMMC DDR3 ID: 150100514436334D42   Ven: Samsung   | Dev: QD63MB RAM: 2.00 Gb
  9. eMMC DDR3 ID: 150100474436424D42   Ven: Samsung   | Dev: GD6BMB RAM: 3.00 Gb
EMI: EXT_RAM CFG Passed
DA: Boot to 2nd DA...
  2nd stage confirmed
DA: SYNC passed

Load HW info...
SRAM: 0x0003A000 [ 232.00 Kb ]
DRAM: 0xC0000000 [ 3.00 Gb ]

EMMC CID: 150100474436424D4201E486962A5617
  VEN: Samsung OEM: 0 ID: 474436424D42 [GD6BMB] PRV: 0x01
  SNN: 3834025514 [0xE486962A]
  MM/YY: 5/2019
  BOOT1: 0x00400000 [ 4.00 Mb ]
  BOOT2: 0x00400000 [ 4.00 Mb ]
  RPMB: 0x00400000 [ 4.00 Mb ]
  USER: 0x747C00000 [ 29.12 Gb ]

CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
  CODE: Cervino
  TYPE: MODERN  [RAPHAEL]
  RNID: 1FEF0ACABC59279901C5865416B369AB
  MEID: 8C6AEDCB943AA0EEFD46B2D1BA224ACB

USB: HIGH-SPEED
Boot done [1]

Reading... Ok
SmartInfo: AndroidVer: 9 UserDataFS: 0x02 [ext4|8+] CacheFS: 0x02 [ext4|8+]
Strategy: 7 [none]

Verify device config...
Ok
Loaders Ok

[1] Process: RESET PROTECTION... Ok
[2] Process: USERDATA... Ok
[3] Process: CACHE... Ok
[4] Verified
[5] Verified
[6] Process: USERDATA... Ok
[7] Verified
[1] Verified
[2] Verified
Done: 00:00:41
Reconnect Power/Cable now

Tanha0321 · 05-18-2023, 11:33

Code:

  SW : TECNO/KE5k-OP/TECNO-KE5k:10/QP1A.190711.020/CD-OP-210803V197:user/release-keys
  Product Brand: TECNO
  Product Device: TECNO-KE5k
  Product Model: TECNO KE5k
  Product Name: KE5k-OP
  Patch Level: QP1A.190711.020
  Display ID: KE5k-H6122CD-Q-OP-210803V197
  SW Version: CD-OP-210803V197
  Ver. CodeName: REL
  Ver. Release: 10
  Sec. Patch: 2021-08-05
  Build Time: 03/08/2021 4:20:14 am
  CPU : arm64-v8a,armeabi-v7a,armeabi
  CPU : armeabi-v7a,armeabi
  CPU : arm64-v8a
  Product Info: ke5k_h6122
  SW : full_ke5k_h6122-user 10 QP1A.190711.020 139542 release-keys
  Product Board: TECNO-KE5k
  Board Platform: mt6765
  Product Manfct: TECNO MOBILE LIMITED
Strategy: 7 [none]
Firmware ID: MT6765_TECNO_MOBILE_LIMITED_TECNO_KE5k_10_KE5k-H6122CD-Q-OP-210803V197_QP1A.190711.020_ke5k_h6122
Verify firmware [MT6765_TECNO_MOBILE_LIMITED_TECNO_KE5k_10_KE5k-H6122CD-Q-OP-210803V197_QP1A.190711.020_ke5k_h6122]...
Firmware is unknown
Please upload file https://infinity-box.com/?r=100020

userData : fileSystem : [f2fs]  with FBE ( file based encryption )

NVRAM: TK_MD_BASIC_MDBIN_PCB01_MT6765_S00.MOLY_LR12A_R3_MP_V118_11_P31
NVRAM: Items: 0xA3 Size: 0x101A86 State: Ok
  WiFi MAC: AA0036004400
  BlTh MAC: 08B49DA14B1E
  IMEI[1]: 
  IMEI[2]: 

Verify device config...
Ok
Loaders Ok

STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : UNLOCKED!
STORAGE : RPMB Status : eMMC : RPMB  KEY NOT PROGRAMMED [USABLE]

Scan preloader...
EMI: MT6765 preloader_ke5k_h6122.bin with 19 memory type(s)
  1. eMMC LP_DDR4X ID: 90014A684445615033   Ven: Hynix     | Dev: hDEaP3 RAM: 6.00 Gb
  2. eMMC LP_DDR4X ID: 150100444836444D42   Ven: Samsung   | Dev: DH6DMB RAM: 4.00 Gb
  3. eMMC LP_DDR4X ID: 150100444836444142   Ven: Samsung   | Dev: DH6DAB RAM: 4.00 Gb
  4. eMMC LP_DDR4X ID: 150100334836434142   Ven: Samsung   | Dev: 3H6CAB RAM: 6.00 Gb
  5. eMMC LP_DDR4X ID: 150100335636434D42   Ven: Samsung   | Dev: 3V6CMB RAM: 6.00 Gb
  6. eMMC LP_DDR4X ID: 90014A484347386134   Ven: Hynix     | Dev: HCG8a4 RAM: 4.00 Gb
  7. eMMC LP_DDR4X ID: 90014A484347386134   Ven: Hynix     | Dev: HCG8a4 RAM: 6.00 Gb
  8. eMMC LP_DDR4X ID: 90014A68433861503E   Ven: Hynix     | Dev: hC8aP> RAM: 4.00 Gb
  9. eMMC LP_DDR4X ID: 90014A68433861503E   Ven: Hynix     | Dev: hC8aP> RAM: 6.00 Gb
  10. eMMC LP_DDR4X ID: 90014A684339615033   Ven: Hynix     | Dev: hC9aP3 RAM: 4.00 Gb
  11. eMMC LP_DDR4X ID: 90014A68433861503E   Ven: Hynix     | Dev: hC8aP> RAM: 3.00 Gb
  12. eMMC LP_DDR4X ID: 150100445036384D42   Ven: Samsung   | Dev: DP68MB RAM: 3.00 Gb
  13. eMMC LP_DDR4X ID: 13014E53304A394B39   Ven: Micron    | Dev: S0J9K9 RAM: 4.00 Gb
  14. eMMC LP_DDR4X ID: 150100445636444142   Ven: Samsung   | Dev: DV6DAB RAM: 4.00 Gb
  15. eMMC LP_DDR4X ID: 150100445036444142   Ven: Samsung   | Dev: DP6DAB RAM: 4.00 Gb
  16. eMMC LP_DDR4X ID: 150100445636444D42   Ven: Samsung   | Dev: DV6DMB RAM: 4.00 Gb
  17. eMMC LP_DDR4X ID: 150100444436384D42   Ven: Samsung   | Dev: DD68MB RAM: 3.00 Gb
  18. eMMC LP_DDR4X ID: 13014E47314A395238   Ven: Micron    | Dev: G1J9R8 RAM: 4.00 Gb
  19. eMMC LP_DDR4X ID: 13014E53304A333741   Ven: Micron    | Dev: S0J37A RAM: 3.00 Gb
Preloader saved: C:\InfinityBox\CM2MT2\backup\preloader\preloader_ke5k_h6122.bin
Verify C:\InfinityBox\CM2MT2\backup\preloader\preloader_ke5k_h6122.bin [df993ff0]...
Exist
Done: 00:00:31
Reconnect Power/Cable now

Reset Mode: Reset FRP only

Operation: Reset Settings/Format FS [ v2.43a8 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Format: FRP [ RESET PROTECTION ]
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device  [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek USB Port (COM4)
MODE[0]: BOOTROM; PORT: 4
Waiting BOOT ACK...
BROM: Skip ACK verify
BROM: Init...
  Init passed
MODE[0]
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
  CODE: Cervino
  TYPE: MODERN  [RAPHAEL]
  MEID: F926D9F20B19DF05E894CEA073D18DC0
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
  VER: 0x05 BL: 0xFE [BOOTROM]
  SOCID: D152F25FD833AC5AFD68A8D213AB7AE6B275A53BC2752E2D85EE2D94A3CBB74A
  SLA: Local Auth
  SLA: Starting Auth
  SLA: Continue Auth
  SLA: Auth Passed; SEC: 0x000000E0
AGENT: AUTO: 0_base: base_v2216
  [3365c4d2] C:\InfinityBox\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6765
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
  DA sent
  Transfer control to DA...
DA: AGENT started
DA: SYNC
  MODE: BROM
  EXT_RAM NOT initialized

EMMC CID: 15010044503644414202CBF4DC8778F5
  VEN: Samsung OEM: 0 ID: 445036444142 [DP6DAB] PRV: 0x02
  SNN: 3421822087 [0xCBF4DC87]
  MM/YY: 7/2021

EMI: Init Ok
EMI: FireFly preloader_ke5k_h6122.bin with 19 memory type(s)
  1. eMMC LP_DDR4X ID: 90014A684445615033   Ven: Hynix     | Dev: hDEaP3 RAM: 6.00 Gb
  2. eMMC LP_DDR4X ID: 150100444836444D42   Ven: Samsung   | Dev: DH6DMB RAM: 4.00 Gb
  3. eMMC LP_DDR4X ID: 150100444836444142   Ven: Samsung   | Dev: DH6DAB RAM: 4.00 Gb
  4. eMMC LP_DDR4X ID: 150100334836434142   Ven: Samsung   | Dev: 3H6CAB RAM: 6.00 Gb
  5. eMMC LP_DDR4X ID: 150100335636434D42   Ven: Samsung   | Dev: 3V6CMB RAM: 6.00 Gb
  6. eMMC LP_DDR4X ID: 90014A484347386134   Ven: Hynix     | Dev: HCG8a4 RAM: 4.00 Gb
  7. eMMC LP_DDR4X ID: 90014A484347386134   Ven: Hynix     | Dev: HCG8a4 RAM: 6.00 Gb
  8. eMMC LP_DDR4X ID: 90014A68433861503E   Ven: Hynix     | Dev: hC8aP> RAM: 4.00 Gb
  9. eMMC LP_DDR4X ID: 90014A68433861503E   Ven: Hynix     | Dev: hC8aP> RAM: 6.00 Gb
  10. eMMC LP_DDR4X ID: 90014A684339615033   Ven: Hynix     | Dev: hC9aP3 RAM: 4.00 Gb
  11. eMMC LP_DDR4X ID: 90014A68433861503E   Ven: Hynix     | Dev: hC8aP> RAM: 3.00 Gb
  12. eMMC LP_DDR4X ID: 150100445036384D42   Ven: Samsung   | Dev: DP68MB RAM: 3.00 Gb
  13. eMMC LP_DDR4X ID: 13014E53304A394B39   Ven: Micron    | Dev: S0J9K9 RAM: 4.00 Gb
  14. eMMC LP_DDR4X ID: 150100445636444142   Ven: Samsung   | Dev: DV6DAB RAM: 4.00 Gb
  15. eMMC LP_DDR4X ID: 150100445036444142   Ven: Samsung   | Dev: DP6DAB RAM: 4.00 Gb
  16. eMMC LP_DDR4X ID: 150100445636444D42   Ven: Samsung   | Dev: DV6DMB RAM: 4.00 Gb
  17. eMMC LP_DDR4X ID: 150100444436384D42   Ven: Samsung   | Dev: DD68MB RAM: 3.00 Gb
  18. eMMC LP_DDR4X ID: 13014E47314A395238   Ven: Micron    | Dev: G1J9R8 RAM: 4.00 Gb
  19. eMMC LP_DDR4X ID: 13014E53304A333741   Ven: Micron    | Dev: S0J37A RAM: 3.00 Gb
EMI: EXT_RAM CFG Passed
DA: Boot to 2nd DA...
  2nd stage confirmed
DA: SYNC passed

Load HW info...
SRAM: 0x0003A000 [ 232.00 Kb ]
DRAM: 0x100000000 [ 4.00 Gb ]

EMMC CID: 15010044503644414202CBF4DC8778F5
  VEN: Samsung OEM: 0 ID: 445036444142 [DP6DAB] PRV: 0x02
  SNN: 3421822087 [0xCBF4DC87]
  MM/YY: 7/2021
  BOOT1: 0x00400000 [ 4.00 Mb ]
  BOOT2: 0x00400000 [ 4.00 Mb ]
  RPMB: 0x01000000 [ 16.00 Mb ]
  USER: 0xE8F800000 [ 58.24 Gb ]

CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
  CODE: Cervino
  TYPE: MODERN  [RAPHAEL]
  RNID: E6AD2B020145083EDB733AD286869A7D
  MEID: F926D9F20B19DF05E894CEA073D18DC0

USB: HIGH-SPEED
Boot done [1]

Reading... Ok
Verify device config...
Ok
Loaders Ok

[1] Process: RESET PROTECTION... Ok
[2] Verified
[1] Verified
[2] Verified
Done: 00:00:24
Reconnect Power/Cable now

ct3im · 05-18-2023, 14:05

Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863A_eMMC_3GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Device info :
Product Brand : YUMKEM
Product Device : N10-EEA
Product Model : N10-EEA
Product Name : N10-EEA
Patch Level : QP1A.190711.020
Display ID : QP1A.190711.020 release-keys
Ver. Incmt : vME360109
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2020-11-05
Build Time : 12.05.2021
Product Info : m107_9863a_64_q
Product Board : m107_9863a_64_q
Board Platform : sp9863a
Product Manfct : YUMKEM

NVMng : SecurityInfo
IMEI[1] : 356987970523435
IMEI[2] : 356987970523443
IMEI[3] : 867400020316638

SEC : SLS:0, SKS:0, SKV:4

Platform Version: MOCORTM_18B_W20.08.3_Debug
Project Version: sharkl3_pub
BASE Version: FM_BASE_18B_W20.08.3
HW Version: sc9863A_modem
CMP_Time : 02-19-2020 01:21:39

MODEM TAG : MOCORTM_18B_W20.08.3_Debug_FM_BASE_18B_W20.08.3_sc 9863A_modem_sharkl3_pub

USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)

- > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:02:55

Operation : Read FW [ v2.14 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863A_eMMC_3GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Device info :
Product Brand : YUMKEM
Product Device : N10-EEA
Product Model : N10-EEA
Product Name : N10-EEA
Patch Level : QP1A.190711.020
Display ID : QP1A.190711.020 release-keys
Ver. Incmt : vME360109
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2020-11-05
Build Time : 12.05.2021
Product Info : m107_9863a_64_q
Product Board : m107_9863a_64_q
Board Platform : sp9863a
Product Manfct : YUMKEM

AndroidVer : 10
VlnrLevel : 0x02

SP9863A__10__QP1A.190711.020__m107_9863a_64_q

Read : u-boot.bin
Read : sml.bin
Read : tos.bin
Read : teecfg.bin
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : dtbo.img
Read : ldsp_l.bin
Read : gdsp_l.bin
Read : modem_l.bin
Read : nvitem_l.bin
Read : deltanv_l.bin
Read : modem_wcn.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : pm_sys.bin
Read : boot.img
Read : recovery.img
Make : persist.img
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : socko.img
ExtSparse : Compression ratio : 57%
Read : odmko.img
ExtSparse : Compression ratio : 2%
Make : userdata.img
Make : cache.img
Read : prodnv.img
ExtSparse : Compression ratio : 9%
Read : phase.cfg
Read : super.img
Read : u-boot-spl.bin

Waiting for device ...
ADB : Device found!
ADB : Connected!
ADB : Prepare Ok!
Collect snow ...
Winter is coming!
In search of truth ...

Firmware size : 0xD9328ECC ( 3,39 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!

Done!
Elapsed: 00:29:26

ct3im · 05-18-2023, 15:01

Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.37
Load IDBase v418494 Ok

Update configuration...
Configuration [12192] updated

Load IDBase v418494 Ok
Operation : Identify Device [ v2.37 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
[+] SecureData Backup
[+] AutoBoot
[+] Read Deep Info: PRL, HW, DEBUG
[+] FireFly : AutoEMI
[+] FireFly : FireFly UNI-Proto
[+] Smart Service
[-] Local SLA
[-] Force BROM
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM (Android) (COM10)
MODE: PRELOADER PORT
PORT: 10
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init BROM
BROM init passed
CHIP: MT6753 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0337

BROM: SecLevel: 0x00000000
BROM: SecMode : PLAIN
BROM: BROM|BL : 0xFF|0x02
BROM: PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA...
AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin
AGENT : Found MT6753
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA...
DA : AGENT started
NAND: DEVICE NOT FOUND
NAND: 000000000000000000000000
eMMC: OK
eMMC: 150100425742443352023866B8A429D1
DAInf: 4 : 2 : 155
DA: DRAM ready
DA: BOOT to 2nd DA...
DA : Receiving HW info

EMMC: CID: 150100425742443352023866B8A473D1
EMMC: VEN: Samsung : OEM: 0 : ID: 425742443352 : PRV: 0x02
EMMC: VEN: Samsung : BWBD3R
EMMC: SNN: 946256036 ( 0x3866B8A4 ) MF: 7/2016

EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x747C00000 [ 29,12 GB ]

SRAM: 0x00020000 [ 128,00 KB ]
DRAM: 0x80000000 [ 2,00 GB ]

CHIP: MT6753 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0337
RNID: 11D4156425610D924A8B7B154812FF0E

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA: USB: HIGH-SPEED

Boot done

Patch Level : O11019
Display ID : O11019 release-keys
SW Version : 1665804970
Ver. CodeName : REL
Ver. Release : 10.0
Sec. Patch : 2018-10-05
Build Time : 15.10.2022
Product Model : TYD-106
Product Brand : TYD
Product Name : TYD-106
Product Device : TYD-106
CPU : armeabi-v7a,armeabi
Product Manfct : TYD
Product Info : TYD-106
SW : full_k96053v2g_hd-user 8.1.0 O11019 1665804970 release-keys
Product Board : k96053v2g_hd
Board Platform : mt6753

USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption *)

Verify device config...
Ok
Verify loader[282df4ed]...
Ok
NVRAM: Items: 0x130 Size: 0x06826C
NVRAM: State: Ok
INFO : WiFi MAC: AA0037003600
INFO : BlTh MAC: 3A2846000053
INFO : IMEI[1]: 355236030362429
INFO : IMEI[2]: 355236030362430

Backup critical data [18] to C:\InfinityBox\CM2MT2\backup\MT6753__11D4156425610 D924A8B7B154812FF0E\
[3] Read: NVRAM
[20] Read: NVDATA
[2] Read: PROINFO
[7] Read: LK
[4] Read: PROTECT1
[0] Read: PRELOADER
Done
Scan preloader...
Preloader:
EMI: MT6752 preloader_k96053v2g_hd.bin with 1 memory type(s) supported
EMI[00] : DRAM : DDR3 : ID: NOT_DEFINED : Ven: Unknown 0x0000 | Dev: : RAM: [ 2,00 GB ]
Preloader saved to: C:\InfinityBox\CM2MT2\backup\PRELOADER\preloader_k 96053v2g_hd.bin
Verify backup\PRELOADER\preloader_k96053v2g_hd.bin [7208039a]...
Stored
Ok
Done
Elapsed: 00:00:55

Operation : Read Firmware [ v2.37 ]
[+] ExtSparse
[-] ForceRead

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM (Android) (COM10)
MODE: PRELOADER PORT
PORT: 10
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init BROM
BROM init passed
CHIP: MT6753 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0337

BROM: SecLevel: 0x00000000
BROM: SecMode : PLAIN
BROM: BROM|BL : 0xFF|0x02
BROM: PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA...
AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin
AGENT : Found MT6753
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA...
DA : AGENT started
NAND: DEVICE NOT FOUND
NAND: 000000000000000000000000
eMMC: OK
eMMC: 150100425742443352023866B8A429D1
DAInf: 4 : 2 : 155
DA: DRAM ready
DA: BOOT to 2nd DA...
DA : Receiving HW info

EMMC: CID: 150100425742443352023866B8A473D1
EMMC: VEN: Samsung : OEM: 0 : ID: 425742443352 : PRV: 0x02
EMMC: VEN: Samsung : BWBD3R
EMMC: SNN: 946256036 ( 0x3866B8A4 ) MF: 7/2016

EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x747C00000 [ 29,12 GB ]

SRAM: 0x00020000 [ 128,00 KB ]
DRAM: 0x80000000 [ 2,00 GB ]

CHIP: MT6753 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0337
RNID: 11D4156425610D924A8B7B154812FF0E

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA: USB: HIGH-SPEED

Boot done

Patch Level : O11019
Display ID : O11019 release-keys
SW Version : 1665804970
Ver. CodeName : REL
Ver. Release : 10.0
Sec. Patch : 2018-10-05
Build Time : 15.10.2022
Product Model : TYD-106
Product Brand : TYD
Product Name : TYD-106
Product Device : TYD-106
CPU : armeabi-v7a,armeabi
Product Manfct : TYD
Product Info : TYD-106
SW : full_k96053v2g_hd-user 8.1.0 O11019 1665804970 release-keys
Product Board : k96053v2g_hd
Board Platform : mt6753

MT6753__TYD__YD-106__.0__019__D-106

Read: preloader.bin
Read: proinfo.img
Read: nvram.bin
Read: items.img
Read: lk.bin
Read: boot.img
Read: recovery.img
Read: logo.bin
Read: secro.img
Read: tz.img
Read: odmdtbo.img
Read: vendor.img
ExtSparse : Compression ratio : 26%
Read: system.img
ExtSparse : Compression ratio : 9%
Read: cache.img
Read: userdata.img

FW Size: 1,62 GB
Android Info saved: _Android_info.txt
Scatter: MT6753_Android_scatter.txt
Saved to: C:\Users\Hugo\Desktop\TYD TYD-106\MT6753__TYD__YD-106__.0__019__D-106\
Verify firmware [MT6753__TYD__YD-106__.0__019__D-106]...
Firmware is unknown
Please upload file https://infinity-box.com/?r=100020
Verify device config...
Ok
No loaders to verify
Done
Elapsed: 00:06:24

Jacobkamudyariw · 05-18-2023, 15:46

Code:

Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : itel-a631w.81d86285.a72ea613
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0020
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ... 
FDL : SEC : RSA auth passed!
FDL : Control transfered!

Boot Done!

Wipe Ok : FRP

Reconnect Power/Cable!

Done!
Elapsed: 00:00:27

ct3im · 05-18-2023, 20:35

Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.37
Load IDBase v418494 Ok

Update configuration...
Configuration [12192] updated

Load IDBase v418494 Ok
Operation : Identify Device [ v2.37 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
[+] SecureData Backup
[+] AutoBoot
[+] Read Deep Info: PRL, HW, DEBUG
[+] FireFly : AutoEMI
[+] FireFly : FireFly UNI-Proto
[+] Smart Service
[-] Local SLA
[-] Force BROM
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM (Android) (COM10)
MODE: PRELOADER PORT
PORT: 10
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init BROM
BROM init passed
CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580

BROM: SecLevel: 0x00000000
BROM: SecMode : PLAIN
BROM: BROM|BL : 0xFF|0x01
BROM: PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA...
AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA...
DA : AGENT started
NAND: DEVICE NOT FOUND
NAND: 000000000000000000000000
eMMC: OK
eMMC: 530E01EA4D4D655001AA104349C87B26
DAInf: 4 : 2 : 156
DA: DRAM ready
DA: BOOT to 2nd DA...
DA : Receiving HW info

EMMC: CID: EA010E5350654D4D4310AA01267BC849
EMMC: VEN: Unknown 0x00EA : OEM: 14 : ID: 5350654D4D43 : PRV: 0x10
EMMC: VEN: Unknown 0x00EA : SPeMMC
EMMC: SNN: 2852202107 ( 0xAA01267B ) MF: 12/2021

EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x73DED8000 [ 28,97 GB ]

SRAM: 0x00020000 [ 128,00 KB ]
DRAM: 0x80000000 [ 2,00 GB ]

CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
RNID: 3ABC2B9769A91A9A45CBD30C9A2BE9B2

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA: USB: HIGH-SPEED

Boot done

SW : Meberry/M6/M6:10/QP1A.190711.020/QD150002:user/release-keys
Product Board : M7
Product Brand : MEBERRY
Product Device : M7
Product Model : M7
Product Name : M7
Patch Level : QP1A.190711.020
Display ID : QP1A.190711.020 release-keys
SW Version : QD260000
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2020-06-05
Build Time : 22.10.2021
Product Manfct : MEBERRY
CPU : armeabi-v7a,armeabi
Product Info : J5
SW : full_k107_mt6580_32_q-user 10 QP1A.190711.020 QD260000 release-keys
Product Board : k107_mt6580_32_q
Board Platform : mt6580

USERDATA : FILESYSTEM : EXT4 with FBE ( File-Base Encryption )

Verify device config...
Ok
Verify loader[3b4569df]...
Ok
NVRAM: Items: 0x76 Size: 0x02976A
NVRAM: State: Ok
INFO : WiFi MAC: 500700BC43B3
INFO : BlTh MAC: 00A2300033A8
INFO : IMEI[1]: 353919025680137
INFO : IMEI[2]: 353919025680137

Backup critical data [18] to C:\InfinityBox\CM2MT2\backup\MT6580__3ABC2B9769A91 A9A45CBD30C9A2BE9B2\
[3] Read: NVRAM
[5] Read: NVDATA
[2] Read: PROINFO
[9] Read: LK
[6] Read: PROTECT1
[0] Read: PRELOADER
Done
Scan preloader...
Preloader:
EMI: MT6752 preloader_k107_mt6580_32_q.bin with 1 memory type(s) supported
Preloader exist: C:\InfinityBox\CM2MT2\backup\PRELOADER\preloader_k 107_mt6580_32_q.bin
Verify backup\PRELOADER\preloader_k107_mt6580_32_q.bin [8b5555ad]...
Exist
Ok
Done
Elapsed: 00:01:03

Operation : Read Firmware [ v2.37 ]
[+] ExtSparse
[-] ForceRead

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM (Android) (COM10)
MODE: PRELOADER PORT
PORT: 10
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init BROM
BROM init passed
CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580

BROM: SecLevel: 0x00000000
BROM: SecMode : PLAIN
BROM: BROM|BL : 0xFF|0x01
BROM: PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA...
AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA...
DA : AGENT started
NAND: DEVICE NOT FOUND
NAND: 000000000000000000000000
eMMC: OK
eMMC: 530E01EA4D4D655001AA104349C87B26
DAInf: 4 : 2 : 156
DA: DRAM ready
DA: BOOT to 2nd DA...
DA : Receiving HW info

EMMC: CID: EA010E5350654D4D4310AA01267BC849
EMMC: VEN: Unknown 0x00EA : OEM: 14 : ID: 5350654D4D43 : PRV: 0x10
EMMC: VEN: Unknown 0x00EA : SPeMMC
EMMC: SNN: 2852202107 ( 0xAA01267B ) MF: 12/2021

EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x73DED8000 [ 28,97 GB ]

SRAM: 0x00020000 [ 128,00 KB ]
DRAM: 0x80000000 [ 2,00 GB ]

CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
RNID: 3ABC2B9769A91A9A45CBD30C9A2BE9B2

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA: USB: HIGH-SPEED

Boot done

SW : Meberry/M6/M6:10/QP1A.190711.020/QD150002:user/release-keys
Product Board : M7
Product Brand : MEBERRY
Product Device : M7
Product Model : M7
Product Name : M7
Patch Level : QP1A.190711.020
Display ID : QP1A.190711.020 release-keys
SW Version : QD260000
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2020-06-05
Build Time : 22.10.2021
Product Manfct : MEBERRY
CPU : armeabi-v7a,armeabi
Product Info : J5
SW : full_k107_mt6580_32_q-user 10 QP1A.190711.020 QD260000 release-keys
Product Board : k107_mt6580_32_q
Board Platform : mt6580

MT6580__MEBERRY__7__A.190711.020

-> INFO: That device WILL dead after ReadOut Flashing!
-> INFO: Only partial flashing available f.e. SYSTEM, VENDOR etc.
-> INFO: In most cases you can "unsecure" device in Engineer mode

Read: preloader.bin
Read: proinfo.img
Read: nvram.bin
Read: lk.bin
Read: logo.bin
Read: boot.img
Read: recovery.img
Read: dtbo.img
Read: vbmeta.img
Read: vbmeta_system.img
Read: vbmeta_vendor.img
Read: tz.img
Read: secro.img
Read: super.img
ExtSparse : Compression ratio : 45%
Read: cache.img
Read: userdata.img

FW Size: 1,81 GB
Android Info saved: _Android_info.txt
Scatter: MT6580_Android_scatter.txt
Saved to: C:\Users\Hugo\Desktop\Meberry M7\MT6580__MEBERRY__7__A.190711.020\
Verify firmware [MT6580__MEBERRY__7__A.190711.020]...
Firmware is unknown
Please upload file https://infinity-box.com/?r=100020
Verify device config...
Ok
No loaders to verify
Done
Elapsed: 00:14:52

Nadeem Waris · 05-19-2023, 08:17

Operation : Reset UserCode [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 30 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CA02
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 9A3EA02961224127E54119AF81241FEA
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , [MXIC] MX25L3291FWJI_09
[0] : FLASH_DIE : 00C2 0020 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

Backup done
Read ExtData
Sorting ExtData
Sort Ok, Rebuild Ok
Restore ExtData
All done
UserCode request removed
UserCode set to default ( 0000 or 1122 )

Done!
Elapsed: 00:00:08
Reconnect Power/Cable!

Jastech · 05-19-2023, 12:33

Operation : Identify
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM6)
MODE : BOOTROM
PORT : 6
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2012 | Manual : Disabled
BROM : SOCID : E60940CB5D1BBF6B612CD4EB13D4F9C318D9944D4ABCD10124 6276E41D4DE30B
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
EMI : CNT : 0004
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 150100514536334D4203272CE44BB5DB
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QE63MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3A3E00000 [ 14.56 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 20906D0C9A2E23BD24E3BB712B04D956

DA : USB : HIGH-SPEED

Boot done!

Patch Level : O11019
Display ID : O11019 release-keys
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2020-10-01
Build Time : 1601002255
Product Model : 9027W
Product Brand : TCL
Product Brand : TCL
Product Name : 9027W
Product Device : A3A_8_4G_TMO
Product Manfct : TCL
Product Info : A3A_8_4G_TMO
Product Board : a3a84g
Board Platform : mt6739

USERDATA : FILESYSTEM : EXT4 with FDE ( Full Disk Encryption *)

NVRAM check : Passed!
NVRAM : SEC NORMAL [ No extra security ]

STORAGE : LifeStatus : OK!

Done!
Elapsed: 00:00:19

Operation : SP Unlock
Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM6)
MODE : BOOTROM
PORT : 6
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BOOTROM
BROM : Configuring target for META

BROM : META configured!

INIT : META confirmed!

Boot done!

AP_CHIP : MT6739,S01
AP_SWVR : alps-mp-o1.mp1-V1.141.2_tb8765ap1.bsp_P77
MD_CHIP : MT6739
MD_SWVR : TK_MD_BASIC_HW

IMEI[1] : 015273112502103
ID0 : Lock : Locked! | MNC : 4608 | CNT : 3 | CODE : 00000000000000000000000000000000
ID1 : Lock : Not Locked | MNC : 0 | CNT : 0 | CODE : 00000000000000000000000000000000
ID2 : Lock : Not Locked | MNC : 0 | CNT : 0 | CODE : 00000000000000000000000000000000
ID3 : Lock : Not Locked | MNC : 0 | CNT : 0 | CODE : 97887E79000000000000000000000000
ID4 : Lock : Not Locked | MNC : 0 | CNT : 0 | CODE : 00000000000000000000000000000000
ID5 : Lock : Not Locked | MNC : 0 | CNT : 0 | CODE : 00000000000000000000000000000000
ID6 : Lock : Not Locked | MNC : 0 | CNT : 0 | CODE : 00000000000000000000000000000000

Done!
Elapsed: 00:00:46

rameshwarpooja · 05-19-2023, 13:49

Realme 8i rmx3151 flashing done by mtk cm2

Quote:

ptfn: Mediatek usb port_v1632 (com112)
mode [0]: Bootrom; port: 112
waiting boot ack...
Brom: Skip ack verify
brom: Init...
Init passed
chip: Mt6781 sbid: 0x8a00 hwvr: 0xca00 swvr: 0x0000 evol: 0x0000 hwc: 0x1066
code: Lagrange
type: Nextgen [luci]
meid: 1f6af4bc31c7d795e2a7875c94018b7a
brom: Sec level: 0x000000e5 mode: Sbc+sda+ext
ver: 0x05 bl: 0xfe [bootrom]
socid: 7d629262cac482754a0ec9927bdd036a2de9c2c0ad19543247 709d1ccfc5d653
sla: Local auth
sla: Starting auth
sla: Continue auth
sla: Auth passed; sec: 0x000000e0
agent: Auto: 0_base: Base_v1712
[e600c7d1] c:\infinitybox\cm2mt2\boot\0_base\base_v1712\mtk_a llinone_da.bin
[fe0bf82c] c:\users\pooja\onedrive\desktop\rmx3151export_11_c .16_2022120818210166\rmx3151export_11_c.16_2022120 818210166\rmx3151export_11_c.16_2022120818210166.o fp2bin\preloader_k6781v1_64.bin
looking for suitable bootchain in da...
Switch to v2216
found mt6781
agent: Mtk_download_agent
brom: Sending 1st da...
Da sent
transfer control to da...
Da: Agent started
da: Sync
mode: Brom
ext_ram not initialized
ufs cid: 2c014d54303634474153414f32553231
ven: 0x012c vid: Mt064gasao2u21 ifw: 0109

emi: Init via preloader_k6781v1_64.bin
emi: Init ok
emi: Mt6752 preloader_k6781v1_64.bin with 12 memory type(s)
1. Eufs lp_ddr4x dev: H9hq16aecmmdar ram: 6.00 gb
2. Eufs lp_ddr4x dev: Km8v7001ja-b813 ram: 8.00 gb
3. Emmc lp_ddr4x id: 90014a684445615033 ven: Hynix | dev: Hdeap3 ram: 6.00 gb
4. Eufs lp_ddr4x dev: H9hq15afambdar ram: 8.00 gb
5. Eufs lp_ddr4x dev: H9hq15aecmbdar ram: 6.00 gb
6. Eufs lp_ddr4x dev: Km2l9001cm-b518 ram: 6.00 gb
7. Eufs lp_ddr4x dev: Mt064gasao2u21 ram: 4.00 gb
8. Eufs lp_ddr4x dev: Mt128gasao4u21 ram: 4.00 gb
9. Eufs lp_ddr4x dev: Km8v9001jm-b813 ram: 8.00 gb
10. Eufs lp_ddr4x dev: H9hq15acpmbdar ram: 4.00 gb
11. Eufs lp_ddr4x dev: Km5h7001dm-b424 ram: 4.00 gb
12. Eufs lp_ddr4x dev: Km5p9001dm-b424 ram: 4.00 gb
emi: Ext_ram cfg passed
da: Boot to 2nd da...
2nd stage confirmed
da: Sync passed

load hw info...
Sram: 0x00060000 [ 384.00 kb ]
dram: 0x100000000 [ 4.00 gb ]

ufs cid: 2c014d54303634474153414f32553231
ven: 0x012c vid: Mt064gasao2u21 ifw: 0109
lu0: 0x00400000 [ 4.00 mb ]
lu1: 0x00400000 [ 4.00 mb ]
lu2: 0xee5800000 [ 59.59 gb ]
reg: 0x302010000

chip: Mt6781 sbid: 0x8a00 hwvr: 0xca00 swvr: 0x0000 evol: 0x0000 hwc: 0x1066
code: Lagrange
type: Nextgen [luci]
rnid: Fc9719763931fd24a7658214da0b3755
meid: 1f6af4bc31c7d795e2a7875c94018b7a

usb: High-speed
boot done [raphael]

[fl]: Combo scatter! Update settings to ufs
[fl]: Set: Recovery.img
[fl]: Set: Oplusreserve2.img
[fl]: Set: Vbmeta.img
[fl]: Set: Vbmeta_system.img
[fl]: Set: Vbmeta_vendor.img
[fl]: Set: Md1img.img
[fl]: Set: Spmfw.img
[fl]: Set: Audio_dsp.img
[fl]: Set: Pi_img.img
[fl]: Set: Scp.img
[fl]: Set: Scp.img
[fl]: Set: Sspm.img
[fl]: Set: Sspm.img
[fl]: Set: Cdt_engineering.img
[fl]: Set: Gz.img
[fl]: Set: Gz.img
[fl]: Set: Lk.img
[fl]: Set: Lk.img
[fl]: Set: Boot.img
[fl]: Set: Logo.bin
[fl]: Set: Dtbo.img
[fl]: Set: Tee.img
[fl]: Set: Tee.img
[fl]: Set: Super.img
[fl]: Set: Cache.img
[fl]: Set: Userdata.img

[fl]: Hw verification passed

analyze pmt...
Loaded 0x8000 bytes
pmt: Pgpt [0x64] records: 50
verify device config...
Ok
loaders ok
[fl]: Pre-flash backup
backup to c:\infinitybox\cm2mt2\backup\mt6781__1f6af4bc31c7d 795e2a7875c94018b7a\
items to check: 20
read [25] nvram
read [15] nvdata
read [24] proinfo
read [41] lk
read [14] nvcfg
read [19] protect1
read [1] pgpt
read [18] persist
read [0] preloader
read [8] oplus_custom
read [26] ocdt
read [38] cdt_engineering
done 12 files
compress: C:\infinitybox\cm2mt2\backup\mt6781__1f6af4bc31c7d 795e2a7875c94018b7a\
cleanup...
Ok
[fl]: Pre-flash backup passed

verify... Ok
[fl]: Pre-erase
erase: 0x0000000000000000 0x0000000008108000
erase: 0x0000000010a08000 0x0000000002d00000
erase: 0x0000000015708000 0x000000000769a000
erase: 0x0000000021000000 0x0000000003a00000
erase: 0x000000002f500000 0x0000000610300000

[fl]: Repartition
[fl]: Repartition ok
analyze pmt...
Loaded 0x8000 bytes
pmt: Pgpt [0x64] records: 50

[fl]: Flashing now...
Write: Recovery 128.00 mb ok
write: Oplusreserve2 64.00 mb ok
write: Vbmeta 8.00 mb ok
write: Vbmeta_system 8.00 mb ok
write: Vbmeta_vendor 8.00 mb ok
write: Md1img 150.00 mb ok
write: Spmfw 1.00 mb ok
write: Audio_dsp 4.00 mb ok
write: Pi_img 1.00 mb ok
write: Scp1 6.00 mb ok
write: Scp2 6.00 mb ok
write: Sspm_1 1.00 mb ok
write: Sspm_2 1.00 mb ok
write: Cdt_engineering 8.00 mb ok
write: Gz1 32.00 mb ok
write: Gz2 32.00 mb ok
write: Lk 5.00 mb ok
write: Lk2 5.00 mb ok
write: Boot 32.00 mb ok
write: Logo 8.00 mb ok
write: Dtbo 8.00 mb ok
write: Tee1 5.00 mb ok
write: Tee2 8.00 mb ok
write: Super 9.50 gb ok
write: Cache 432.00 mb ok
write: Userdata 14.00 gb ok

[fl]: Repartition
[fl]: Repartition ok

[fl]: Flashing finished
done: 00:06:19

[/QUOTE]

A.G.Shahid · 05-19-2023, 16:35

Card found : S/N : 73CA70CC , v0155
Chinese Miracle II [MTK module] v 1.58

Operation : Reset UserCode [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 3 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : ACDF61F94DA9E4FC6DFE7D7AC14F3924
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EC , [GigaDevice] GD25LQ32
[0] : FLASH_DIE : 00C8 0060 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

Backup done
Read ExtData
Sorting ExtData
Sort Ok, Rebuild Ok
Restore ExtData
All done
UserCode request removed
UserCode set to default ( 0000 or 1122 )

Done!
Elapsed: 00:00:12
Reconnect Power/Cable!

A.G.Shahid · 05-19-2023, 16:37

Card found : 73CA70CC , v0155
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.07

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]

SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]

Operation : Format FileSystem [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v2.0 (c)2019
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_036 959A70F24_NVM.nv

Executing FormatFFS ...
Format FFS Done!

Done!
Elapsed: 00:00:20

Reconnect Power/Cable!

A.G.Shahid · 05-19-2023, 16:38

Card found : 73CA70CC , v0155
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.07

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]

SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]

Operation : Format FileSystem [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v2.0 (c)2019
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_036 FEEDAAD43_NVM.nv

Executing FormatFFS ...
Format FFS Done!

Done!
Elapsed: 00:00:19

Reconnect Power/Cable!

05-18-2023, 14:05	#73956 (permalink)
ct3im No Life Poster Join Date: Oct 2004 Location: Madeira Island Age: 47 Posts: 2,454 Member: 85718 Status: Offline Thanks Meter: 449	Tablet LNMBBS N10-EEA Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14 Load IDBase v8331 Ok! Operation : Identify [ v2.14 ] BootMode : FLASH 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : INF : 0_SC9863x_BASE : SC9863A_eMMC_3GB_0S Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : 0x0008 FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True FDL : RAW : 0x0002 FDL : FLH : 0x400000 FDL : Control transfered! Boot Done! Device info : Product Brand : YUMKEM Product Device : N10-EEA Product Model : N10-EEA Product Name : N10-EEA Patch Level : QP1A.190711.020 Display ID : QP1A.190711.020 release-keys Ver. Incmt : vME360109 Ver. CodeName : REL Ver. Release : 10 Sec. Patch : 2020-11-05 Build Time : 12.05.2021 Product Info : m107_9863a_64_q Product Board : m107_9863a_64_q Board Platform : sp9863a Product Manfct : YUMKEM NVMng : SecurityInfo IMEI[1] : 356987970523435 IMEI[2] : 356987970523443 IMEI[3] : 867400020316638 SEC : SLS:0, SKS:0, SKV:4 Platform Version: MOCORTM_18B_W20.08.3_Debug Project Version: sharkl3_pub BASE Version: FM_BASE_18B_W20.08.3 HW Version: sc9863A_modem CMP_Time : 02-19-2020 01:21:39 MODEM TAG : MOCORTM_18B_W20.08.3_Debug_FM_BASE_18B_W20.08.3_sc 9863A_modem_sharkl3_pub USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***) - > INFO : Remove cable from device to switch it off! Done! Elapsed: 00:02:55 Operation : Read FW [ v2.14 ] 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : INF : 0_SC9863x_BASE : SC9863A_eMMC_3GB_0S Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : 0x0008 FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True FDL : RAW : 0x0002 FDL : FLH : 0x400000 FDL : Control transfered! Boot Done! Device info : Product Brand : YUMKEM Product Device : N10-EEA Product Model : N10-EEA Product Name : N10-EEA Patch Level : QP1A.190711.020 Display ID : QP1A.190711.020 release-keys Ver. Incmt : vME360109 Ver. CodeName : REL Ver. Release : 10 Sec. Patch : 2020-11-05 Build Time : 12.05.2021 Product Info : m107_9863a_64_q Product Board : m107_9863a_64_q Board Platform : sp9863a Product Manfct : YUMKEM AndroidVer : 10 VlnrLevel : 0x02 SP9863A__10__QP1A.190711.020__m107_9863a_64_q Read : u-boot.bin Read : sml.bin Read : tos.bin Read : teecfg.bin Read : vbmeta.img Read : vbmeta_system.img Read : vbmeta_vendor.img Read : dtbo.img Read : ldsp_l.bin Read : gdsp_l.bin Read : modem_l.bin Read : nvitem_l.bin Read : deltanv_l.bin Read : modem_wcn.img Read : gnssmodem.bin Read : gnssbdmodem.bin Read : pm_sys.bin Read : boot.img Read : recovery.img Make : persist.img Read : boot_logo.bmp Read : fastboot_logo.bmp Read : socko.img ExtSparse : Compression ratio : 57% Read : odmko.img ExtSparse : Compression ratio : 2% Make : userdata.img Make : cache.img Read : prodnv.img ExtSparse : Compression ratio : 9% Read : phase.cfg Read : super.img Read : u-boot-spl.bin Waiting for device ... ADB : Device found! ADB : Connected! ADB : Prepare Ok! Collect snow ... Winter is coming! In search of truth ... Firmware size : 0xD9328ECC ( 3,39 GiB ) Android Info saved : _Android_info.txt Reconnect Power/Cable! Done! Elapsed: 00:29:26

05-18-2023, 15:01	#73957 (permalink)
ct3im No Life Poster Join Date: Oct 2004 Location: Madeira Island Age: 47 Posts: 2,454 Member: 85718 Status: Offline Thanks Meter: 449	TYD TYD-106 Firmware reading Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.37 Load IDBase v418494 Ok Update configuration... Configuration [12192] updated Load IDBase v418494 Ok Operation : Identify Device [ v2.37 ] Platform: MTK SmartPhone - MT65/67/68/81/83/87 \| Helio G/P/X Mode: FLASH [+] SecureData Backup [+] AutoBoot [+] Read Deep Info: PRL, HW, DEBUG [+] FireFly : AutoEMI [+] FireFly : FireFly UNI-Proto [+] Smart Service [-] Local SLA [-] Force BROM Wait... 1. Power Off the device 2. Wait 20 seconds 3. Connect USB cable to device Waiting for device connection... PTFN: MediaTek PreLoader USB VCOM (Android) (COM10) MODE: PRELOADER PORT PORT: 10 Waiting BOOT ack... PRELOADER: ACK confirmed BROM: Init BROM BROM init passed CHIP: MT6753 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0337 BROM: SecLevel: 0x00000000 BROM: SecMode : PLAIN BROM: BROM\|BL : 0xFF\|0x02 BROM: PRELOADER PORT AGENT : 0_base : BASE_v2112 \| Manual : Disabled AGENT : Looking for suitable BootChain in DA... AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin AGENT : Found MT6753 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA... BROM: DA sent BROM: Transfer control to DA... DA : AGENT started NAND: DEVICE NOT FOUND NAND: 000000000000000000000000 eMMC: OK eMMC: 150100425742443352023866B8A429D1 DAInf: 4 : 2 : 155 DA: DRAM ready DA: BOOT to 2nd DA... DA : Receiving HW info EMMC: CID: 150100425742443352023866B8A473D1 EMMC: VEN: Samsung : OEM: 0 : ID: 425742443352 : PRV: 0x02 EMMC: VEN: Samsung : BWBD3R EMMC: SNN: 946256036 ( 0x3866B8A4 ) MF: 7/2016 EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0x747C00000 [ 29,12 GB ] SRAM: 0x00020000 [ 128,00 KB ] DRAM: 0x80000000 [ 2,00 GB ] CHIP: MT6753 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0337 RNID: 11D4156425610D924A8B7B154812FF0E STATUS : BLANK FLASH BSTYLE : EMMC FLASH BOOT DA: USB: HIGH-SPEED Boot done Patch Level : O11019 Display ID : O11019 release-keys SW Version : 1665804970 Ver. CodeName : REL Ver. Release : 10.0 Sec. Patch : 2018-10-05 Build Time : 15.10.2022 Product Model : TYD-106 Product Brand : TYD Product Name : TYD-106 Product Device : TYD-106 CPU : armeabi-v7a,armeabi Product Manfct : TYD Product Info : TYD-106 SW : full_k96053v2g_hd-user 8.1.0 O11019 1665804970 release-keys Product Board : k96053v2g_hd Board Platform : mt6753 USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption *) Verify device config... Ok Verify loader[282df4ed]... Ok NVRAM: Items: 0x130 Size: 0x06826C NVRAM: State: Ok INFO : WiFi MAC: AA0037003600 INFO : BlTh MAC: 3A2846000053 INFO : IMEI[1]: 355236030362429 INFO : IMEI[2]: 355236030362430 Backup critical data [18] to C:\InfinityBox\CM2MT2\backup\MT6753__11D4156425610 D924A8B7B154812FF0E\ [3] Read: NVRAM [20] Read: NVDATA [2] Read: PROINFO [7] Read: LK [4] Read: PROTECT1 [0] Read: PRELOADER Done Scan preloader... Preloader: EMI: MT6752 preloader_k96053v2g_hd.bin with 1 memory type(s) supported EMI[00] : DRAM : DDR3 : ID: NOT_DEFINED : Ven: Unknown 0x0000 \| Dev: : RAM: [ 2,00 GB ] Preloader saved to: C:\InfinityBox\CM2MT2\backup\PRELOADER\preloader_k 96053v2g_hd.bin Verify backup\PRELOADER\preloader_k96053v2g_hd.bin [7208039a]... Stored Ok Done Elapsed: 00:00:55 Operation : Read Firmware [ v2.37 ] [+] ExtSparse [-] ForceRead 1. Power Off the device 2. Wait 20 seconds 3. Connect USB cable to device Waiting for device connection... PTFN: MediaTek PreLoader USB VCOM (Android) (COM10) MODE: PRELOADER PORT PORT: 10 Waiting BOOT ack... PRELOADER: ACK confirmed BROM: Init BROM BROM init passed CHIP: MT6753 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0337 BROM: SecLevel: 0x00000000 BROM: SecMode : PLAIN BROM: BROM\|BL : 0xFF\|0x02 BROM: PRELOADER PORT AGENT : 0_base : BASE_v2112 \| Manual : Disabled AGENT : Looking for suitable BootChain in DA... AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin AGENT : Found MT6753 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA... BROM: DA sent BROM: Transfer control to DA... DA : AGENT started NAND: DEVICE NOT FOUND NAND: 000000000000000000000000 eMMC: OK eMMC: 150100425742443352023866B8A429D1 DAInf: 4 : 2 : 155 DA: DRAM ready DA: BOOT to 2nd DA... DA : Receiving HW info EMMC: CID: 150100425742443352023866B8A473D1 EMMC: VEN: Samsung : OEM: 0 : ID: 425742443352 : PRV: 0x02 EMMC: VEN: Samsung : BWBD3R EMMC: SNN: 946256036 ( 0x3866B8A4 ) MF: 7/2016 EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0x747C00000 [ 29,12 GB ] SRAM: 0x00020000 [ 128,00 KB ] DRAM: 0x80000000 [ 2,00 GB ] CHIP: MT6753 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0337 RNID: 11D4156425610D924A8B7B154812FF0E STATUS : BLANK FLASH BSTYLE : EMMC FLASH BOOT DA: USB: HIGH-SPEED Boot done Patch Level : O11019 Display ID : O11019 release-keys SW Version : 1665804970 Ver. CodeName : REL Ver. Release : 10.0 Sec. Patch : 2018-10-05 Build Time : 15.10.2022 Product Model : TYD-106 Product Brand : TYD Product Name : TYD-106 Product Device : TYD-106 CPU : armeabi-v7a,armeabi Product Manfct : TYD Product Info : TYD-106 SW : full_k96053v2g_hd-user 8.1.0 O11019 1665804970 release-keys Product Board : k96053v2g_hd Board Platform : mt6753 MT6753__TYD__YD-106__.0__019__D-106 Read: preloader.bin Read: proinfo.img Read: nvram.bin Read: items.img Read: lk.bin Read: boot.img Read: recovery.img Read: logo.bin Read: secro.img Read: tz.img Read: odmdtbo.img Read: vendor.img ExtSparse : Compression ratio : 26% Read: system.img ExtSparse : Compression ratio : 9% Read: cache.img Read: userdata.img FW Size: 1,62 GB Android Info saved: _Android_info.txt Scatter: MT6753_Android_scatter.txt Saved to: C:\Users\Hugo\Desktop\TYD TYD-106\MT6753__TYD__YD-106__.0__019__D-106\ Verify firmware [MT6753__TYD__YD-106__.0__019__D-106]... Firmware is unknown Please upload file https://infinity-box.com/?r=100020 Verify device config... Ok No loaders to verify Done Elapsed: 00:06:24

05-18-2023, 20:35	#73959 (permalink)
ct3im No Life Poster Join Date: Oct 2004 Location: Madeira Island Age: 47 Posts: 2,454 Member: 85718 Status: Offline Thanks Meter: 449	Tablet Meberry M7 Firmware read Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.37 Load IDBase v418494 Ok Update configuration... Configuration [12192] updated Load IDBase v418494 Ok Operation : Identify Device [ v2.37 ] Platform: MTK SmartPhone - MT65/67/68/81/83/87 \| Helio G/P/X Mode: FLASH [+] SecureData Backup [+] AutoBoot [+] Read Deep Info: PRL, HW, DEBUG [+] FireFly : AutoEMI [+] FireFly : FireFly UNI-Proto [+] Smart Service [-] Local SLA [-] Force BROM Wait... 1. Power Off the device 2. Wait 20 seconds 3. Connect USB cable to device Waiting for device connection... PTFN: MediaTek PreLoader USB VCOM (Android) (COM10) MODE: PRELOADER PORT PORT: 10 Waiting BOOT ack... PRELOADER: ACK confirmed BROM: Init BROM BROM init passed CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580 BROM: SecLevel: 0x00000000 BROM: SecMode : PLAIN BROM: BROM\|BL : 0xFF\|0x01 BROM: PRELOADER PORT AGENT : 0_base : BASE_v2112 \| Manual : Disabled AGENT : Looking for suitable BootChain in DA... AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin AGENT : Found MT6580 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA... BROM: DA sent BROM: Transfer control to DA... DA : AGENT started NAND: DEVICE NOT FOUND NAND: 000000000000000000000000 eMMC: OK eMMC: 530E01EA4D4D655001AA104349C87B26 DAInf: 4 : 2 : 156 DA: DRAM ready DA: BOOT to 2nd DA... DA : Receiving HW info EMMC: CID: EA010E5350654D4D4310AA01267BC849 EMMC: VEN: Unknown 0x00EA : OEM: 14 : ID: 5350654D4D43 : PRV: 0x10 EMMC: VEN: Unknown 0x00EA : SPeMMC EMMC: SNN: 2852202107 ( 0xAA01267B ) MF: 12/2021 EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0x73DED8000 [ 28,97 GB ] SRAM: 0x00020000 [ 128,00 KB ] DRAM: 0x80000000 [ 2,00 GB ] CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580 RNID: 3ABC2B9769A91A9A45CBD30C9A2BE9B2 STATUS : BLANK FLASH BSTYLE : EMMC FLASH BOOT DA: USB: HIGH-SPEED Boot done SW : Meberry/M6/M6:10/QP1A.190711.020/QD150002:user/release-keys Product Board : M7 Product Brand : MEBERRY Product Device : M7 Product Model : M7 Product Name : M7 Patch Level : QP1A.190711.020 Display ID : QP1A.190711.020 release-keys SW Version : QD260000 Ver. CodeName : REL Ver. Release : 10 Sec. Patch : 2020-06-05 Build Time : 22.10.2021 Product Manfct : MEBERRY CPU : armeabi-v7a,armeabi Product Info : J5 SW : full_k107_mt6580_32_q-user 10 QP1A.190711.020 QD260000 release-keys Product Board : k107_mt6580_32_q Board Platform : mt6580 USERDATA : FILESYSTEM : EXT4 with FBE ( File-Base Encryption ) Verify device config... Ok Verify loader[3b4569df]... Ok NVRAM: Items: 0x76 Size: 0x02976A NVRAM: State: Ok INFO : WiFi MAC: 500700BC43B3 INFO : BlTh MAC: 00A2300033A8 INFO : IMEI[1]: 353919025680137 INFO : IMEI[2]: 353919025680137 Backup critical data [18] to C:\InfinityBox\CM2MT2\backup\MT6580__3ABC2B9769A91 A9A45CBD30C9A2BE9B2\ [3] Read: NVRAM [5] Read: NVDATA [2] Read: PROINFO [9] Read: LK [6] Read: PROTECT1 [0] Read: PRELOADER Done Scan preloader... Preloader: EMI: MT6752 preloader_k107_mt6580_32_q.bin with 1 memory type(s) supported Preloader exist: C:\InfinityBox\CM2MT2\backup\PRELOADER\preloader_k 107_mt6580_32_q.bin Verify backup\PRELOADER\preloader_k107_mt6580_32_q.bin [8b5555ad]... Exist Ok Done Elapsed: 00:01:03 Operation : Read Firmware [ v2.37 ] [+] ExtSparse [-] ForceRead 1. Power Off the device 2. Wait 20 seconds 3. Connect USB cable to device Waiting for device connection... PTFN: MediaTek PreLoader USB VCOM (Android) (COM10) MODE: PRELOADER PORT PORT: 10 Waiting BOOT ack... PRELOADER: ACK confirmed BROM: Init BROM BROM init passed CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580 BROM: SecLevel: 0x00000000 BROM: SecMode : PLAIN BROM: BROM\|BL : 0xFF\|0x01 BROM: PRELOADER PORT AGENT : 0_base : BASE_v2112 \| Manual : Disabled AGENT : Looking for suitable BootChain in DA... AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin AGENT : Found MT6580 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA... BROM: DA sent BROM: Transfer control to DA... DA : AGENT started NAND: DEVICE NOT FOUND NAND: 000000000000000000000000 eMMC: OK eMMC: 530E01EA4D4D655001AA104349C87B26 DAInf: 4 : 2 : 156 DA: DRAM ready DA: BOOT to 2nd DA... DA : Receiving HW info EMMC: CID: EA010E5350654D4D4310AA01267BC849 EMMC: VEN: Unknown 0x00EA : OEM: 14 : ID: 5350654D4D43 : PRV: 0x10 EMMC: VEN: Unknown 0x00EA : SPeMMC EMMC: SNN: 2852202107 ( 0xAA01267B ) MF: 12/2021 EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0x73DED8000 [ 28,97 GB ] SRAM: 0x00020000 [ 128,00 KB ] DRAM: 0x80000000 [ 2,00 GB ] CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580 RNID: 3ABC2B9769A91A9A45CBD30C9A2BE9B2 STATUS : BLANK FLASH BSTYLE : EMMC FLASH BOOT DA: USB: HIGH-SPEED Boot done SW : Meberry/M6/M6:10/QP1A.190711.020/QD150002:user/release-keys Product Board : M7 Product Brand : MEBERRY Product Device : M7 Product Model : M7 Product Name : M7 Patch Level : QP1A.190711.020 Display ID : QP1A.190711.020 release-keys SW Version : QD260000 Ver. CodeName : REL Ver. Release : 10 Sec. Patch : 2020-06-05 Build Time : 22.10.2021 Product Manfct : MEBERRY CPU : armeabi-v7a,armeabi Product Info : J5 SW : full_k107_mt6580_32_q-user 10 QP1A.190711.020 QD260000 release-keys Product Board : k107_mt6580_32_q Board Platform : mt6580 MT6580__MEBERRY__7__A.190711.020 -> INFO: That device WILL dead after ReadOut Flashing! -> INFO: Only partial flashing available f.e. SYSTEM, VENDOR etc. -> INFO: In most cases you can "unsecure" device in Engineer mode Read: preloader.bin Read: proinfo.img Read: nvram.bin Read: lk.bin Read: logo.bin Read: boot.img Read: recovery.img Read: dtbo.img Read: vbmeta.img Read: vbmeta_system.img Read: vbmeta_vendor.img Read: tz.img Read: secro.img Read: super.img ExtSparse : Compression ratio : 45% Read: cache.img Read: userdata.img FW Size: 1,81 GB Android Info saved: _Android_info.txt Scatter: MT6580_Android_scatter.txt Saved to: C:\Users\Hugo\Desktop\Meberry M7\MT6580__MEBERRY__7__A.190711.020\ Verify firmware [MT6580__MEBERRY__7__A.190711.020]... Firmware is unknown Please upload file https://infinity-box.com/?r=100020 Verify device config... Ok No loaders to verify Done Elapsed: 00:14:52

05-19-2023, 08:17	#73960 (permalink)
Nadeem Waris No Life Poster Join Date: Jul 2009 Location: SINDH PAKISTAN Posts: 7,462 Member: 1080718 Status: Offline Sonork: 100.1596539 QQ-2710826805 Thanks Meter: 2,247	Qmobile g3 lite reset code done Operation : Reset UserCode [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey ( '*' ) Wait for phone... Phone found! [ 30 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6261 BB_CPU_HW : CA02 BB_CPU_SW : 0001 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6261_S0000 BB_CPU_SN : 9A3EA02961224127E54119AF81241FEA BROM Protocol Version : 05 Setting... Setting done , result code 0x000E BROM stage done Seek and prepare DownloadAgent DownloadAgent matching HW Found! DA verify and select done Sending DA to target ... DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E SOC_VERIFY : 0xC1 BOOT_STYLE : SF_FLASH_BOOT NOR Flash IC initialized [0] : FLASH_VEN : 0x0112 , [MXIC] MX25L3291FWJI_09 [0] : FLASH_DIE : 00C2 0020 0016 0000 [0] : FLASH_LEN : 0x00400000 SDS_INFO : 0x003FE000 , 0x00002000 INT_RAM : 0x0000D000 EXT_RAM : 0x00400000 Backup done Read ExtData Sorting ExtData Sort Ok, Rebuild Ok Restore ExtData All done UserCode request removed UserCode set to default ( 0000 or 1122 ) Done! Elapsed: 00:00:08 Reconnect Power/Cable!

05-19-2023, 12:33	#73961 (permalink)
Jastech Freak Poster Join Date: Jan 2007 Location: Philippines Posts: 168 Member: 436121 Status: Offline Thanks Meter: 40	alcatel 3T 8 (9027W) t-mobile unlocked Operation : Identify Mode : FLASH 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port_V1632 (COM6) MODE : BOOTROM PORT : 6 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000000 BROM : SecMode : PLAIN [+PRL] BROM : BROM\|BL : 0x05\|0xFE BROM : BOOTROM MODE : 0_base : BASE_v2012 \| Manual : Disabled BROM : SOCID : E60940CB5D1BBF6B612CD4EB13D4F9C318D9944D4ABCD10124 6276E41D4DE30B AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6739 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized! EMI : DEV : INFINITY EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0 EMI : CNT : 0004 EMI : Init EMI from INTERNAL DB EMI : EXT_RAM CFG Passed! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00020000 [ 128.00 KB ] DRAM: 0x80000000 [ 2.00 GB ] EMMC: 150100514536334D4203272CE44BB5DB EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : QE63MB EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0x3A3E00000 [ 14.56 GB ] CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 20906D0C9A2E23BD24E3BB712B04D956 DA : USB : HIGH-SPEED Boot done! Patch Level : O11019 Display ID : O11019 release-keys Ver. CodeName : REL Ver. Release : 8.1.0 Sec. Patch : 2020-10-01 Build Time : 1601002255 Product Model : 9027W Product Brand : TCL Product Brand : TCL Product Name : 9027W Product Device : A3A_8_4G_TMO Product Manfct : TCL Product Info : A3A_8_4G_TMO Product Board : a3a84g Board Platform : mt6739 USERDATA : FILESYSTEM : EXT4 with FDE ( Full Disk Encryption *) NVRAM check : Passed! NVRAM : SEC NORMAL [ No extra security ] STORAGE : LifeStatus : OK! Done! Elapsed: 00:00:19 Operation : SP Unlock Mode : META 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port_V1632 (COM6) MODE : BOOTROM PORT : 6 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000000 BROM : SecMode : PLAIN [+PRL] BROM : BOOTROM BROM : Configuring target for META BROM : META configured! INIT : META confirmed! Boot done! AP_CHIP : MT6739,S01 AP_SWVR : alps-mp-o1.mp1-V1.141.2_tb8765ap1.bsp_P77 MD_CHIP : MT6739 MD_SWVR : TK_MD_BASIC_HW IMEI[1] : 015273112502103 ID0 : Lock : Locked! \| MNC : 4608 \| CNT : 3 \| CODE : 00000000000000000000000000000000 ID1 : Lock : Not Locked \| MNC : 0 \| CNT : 0 \| CODE : 00000000000000000000000000000000 ID2 : Lock : Not Locked \| MNC : 0 \| CNT : 0 \| CODE : 00000000000000000000000000000000 ID3 : Lock : Not Locked \| MNC : 0 \| CNT : 0 \| CODE : 97887E79000000000000000000000000 ID4 : Lock : Not Locked \| MNC : 0 \| CNT : 0 \| CODE : 00000000000000000000000000000000 ID5 : Lock : Not Locked \| MNC : 0 \| CNT : 0 \| CODE : 00000000000000000000000000000000 ID6 : Lock : Not Locked \| MNC : 0 \| CNT : 0 \| CODE : 00000000000000000000000000000000 Done! Elapsed: 00:00:46

05-19-2023, 16:35	#73963 (permalink)
A.G.Shahid No Life Poster Join Date: Nov 2016 Location: ISI Posts: 5,792 Member: 2644066 Status: Offline Thanks Meter: 1,773	Qmobile power 3 reset password done by cm2 Card found : S/N : 73CA70CC , v0155 Chinese Miracle II [MTK module] v 1.58 Operation : Reset UserCode [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey ( '*' ) Wait for phone... Phone found! [ 3 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6261 BB_CPU_HW : CB01 BB_CPU_SW : 0001 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6261_S0000 BB_CPU_SN : ACDF61F94DA9E4FC6DFE7D7AC14F3924 BROM Protocol Version : 05 Setting... Setting done , result code 0x000E BROM stage done Seek and prepare DownloadAgent DownloadAgent matching HW Found! DA verify and select done Sending DA to target ... DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E SOC_VERIFY : 0xC1 BOOT_STYLE : SF_FLASH_BOOT NOR Flash IC initialized [0] : FLASH_VEN : 0x00EC , [GigaDevice] GD25LQ32 [0] : FLASH_DIE : 00C8 0060 0016 0000 [0] : FLASH_LEN : 0x00400000 SDS_INFO : 0x003FE000 , 0x00002000 INT_RAM : 0x0000D000 EXT_RAM : 0x00400000 Backup done Read ExtData Sorting ExtData Sort Ok, Rebuild Ok Restore ExtData All done UserCode request removed UserCode set to default ( 0000 or 1122 ) Done! Elapsed: 00:00:12 Reconnect Power/Cable!

05-19-2023, 16:37	#73964 (permalink)
A.G.Shahid No Life Poster Join Date: Nov 2016 Location: ISI Posts: 5,792 Member: 2644066 Status: Offline Thanks Meter: 1,773	Vgotel i251 reset password done by cm2 Card found : 73CA70CC , v0155 Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.07 SCRD mode : AUTO SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ] SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ] Operation : Format FileSystem [ v1.07 ] 1. Power off device 2. Press and hold BootKey or use BootCable 3. Insert cable and battery in device! Wait for device ... Device Connected! BootVersion : SPRD3 BootSource : InternalLibrary BootVersion : Infinity SCR 6531EFM v2.0 (c)2019 Port speed : 921600 FDL Flash : Control transfered! Boot Done! CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ] Make backup of sensetive data Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_036 959A70F24_NVM.nv Executing FormatFFS ... Format FFS Done! Done! Elapsed: 00:00:20 Reconnect Power/Cable!

05-19-2023, 16:38	#73965 (permalink)
A.G.Shahid No Life Poster Join Date: Nov 2016 Location: ISI Posts: 5,792 Member: 2644066 Status: Offline Thanks Meter: 1,773	Qmobile k100 reset password done by cm2 Card found : 73CA70CC , v0155 Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.07 SCRD mode : AUTO SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ] SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ] Operation : Format FileSystem [ v1.07 ] 1. Power off device 2. Press and hold BootKey or use BootCable 3. Insert cable and battery in device! Wait for device ... Device Connected! BootVersion : SPRD3 BootSource : InternalLibrary BootVersion : Infinity SCR 6531EFM v2.0 (c)2019 Port speed : 921600 FDL Flash : Control transfered! Boot Done! CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ] Make backup of sensetive data Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_036 FEEDAAD43_NVM.nv Executing FormatFFS ... Format FFS Done! Done! Elapsed: 00:00:19 Reconnect Power/Cable!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
news headlines to gsm phone	mos	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	05-22-2016 11:42
my 8810 is phone locked ,can somebody please help	duyphuc	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	18	12-23-2014 09:03
need software for 5161 by cable	mln2000	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	08-29-2010 20:17