GSM Shop  
GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box
Reload this Page Successfully unlocked/repaired phones by Infinity-Box
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source Search Today's Posts Mark Forums Read

Reply
Page 4994 of 5118 « First 39944494489449444984499149924993 4994 499549964997500450445094 Last »
 
LinkBack Thread Tools Display Modes
Old 09-06-2023, 11:50   #74896 (permalink)
No Life Poster
 
Tanha0321's Avatar
 
Join Date: Jul 2006
Location: Pakistan karachi
Posts: 9,914
Member: 314003
Status: Offline
Thanks Meter: 3,004
Samsung SM-A107F Frp

Code:
  SW: samsung/a10sxx/a10s:11/RP1A.200720.012/A107FXXS8CVL1:user/release-keys
  Product Brand: samsung
  Product Device: a10s
  Product Model: SM-A107F
  Product Name: a10sxx
  Patch Level: RP1A.200720.012
  Display ID: RP1A.200720.012.A107FXXS8CVL1
  SW Version: A107FXXS8CVL1
  Build Time: 29/12/2022 4:34:45 am
  Ver. CodeName: REL
  Ver. Release: 11
  Sec. Patch: 2022-11-01
  CPU: armeabi-v7a,armeabi
  Product Info: a10s
  SW: a10sxx-user 11 RP1A.200720.012 A107FXXS8CVL1 release-keys
  Product Board: S96116RA1
  Board Platform: mt6765
  Product Manfct: samsung

Strategy: [samsung]
Firmware ID: MT6765_samsung_SM-A107F_OSv11_RP1A.200720.012.A107FXXS8CVL1_RP1A.200720.012_a10s

Analyze userdata...

Analyze modem...
TITAN_S1_Q0MP1_K62V1_64_BSP_MDBIN_PCB01_MT6765_S00.MOLY_LR12A_R3_TC10_PR1_SP_V4_P50
Analyze nvram...
NVRAM: Items: 0xBB Size: 0x0AD91A [SecLv: Vendor Signed] State: Ok
  WiFi MAC: AA0036004400
  BlTh MAC: 1089FBE69CE7
  IMEI[1]: 648C07E0CCCAD82
  IMEI[2]: ABD1F1945E81838

STORAGE : Life Status : eMMC : BAD! LIFE CYCLE END! READ-ONLY STATE!
STORAGE : OTP Status : NOT Enabled!
STORAGE : RPMB Status : eMMC : RPMB  KEY PROGRAMMED [UNUSABLE]

Analyze preloader...
EMI: MT6765 preloader_s96116ra1.bin with 8 memory type(s)
  1. eMMC DDR3 ID: 150100514436334D42   Ven: Samsung   | Dev: QD63MB RAM: 2.00 Gb
  2. eMMC DDR3 ID: 700100464D42434541   Ven: Kingston  | Dev: FMBCEA RAM: 2.00 Gb
  3. eMMC DDR3 ID: 150100474436424D42   Ven: Samsung   | Dev: GD6BMB RAM: 3.00 Gb
  4. eMMC DDR3 ID: 150100515836334D42   Ven: Samsung   | Dev: QX63MB RAM: 2.00 Gb
  5. eMMC DDR3 ID: 150100515836334142   Ven: Samsung   | Dev: QX63AB RAM: 2.00 Gb
  6. eMMC DDR3 ID: 150100475836424142   Ven: Samsung   | Dev: GX6BAB RAM: 3.00 Gb
  7. eMMC DDR3 ID: 150100475836424D42   Ven: Samsung   | Dev: GX6BMB RAM: 3.00 Gb
  8. eMMC DDR3 ID: 90014A68423861503E   Ven: Hynix     | Dev: hB8aP> RAM: 2.00 Gb
Preloader saved: C:\InfinityBox\CM2MT2\backup\preloader\preloader_s96116ra1.bin
Memory chip may be faulty!
Done: 00:00:43
Reconnect Power/Cable now


Operation: Reset Settings/Format FS [ v2.46 ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Format: FRP [ RESET PROTECTION ]
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM (Android) (COM13)
MODE [0]: PRELOADER PORT; PORT: 13
Waiting for BOOT ACK...
PRELOADER ACK Ok
BROM: Init... Ok
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
  CODE: Cervino
  TYPE: MODERN  [RAPHAEL]
BROM: Sec Level: 0x00000005 Mode: SBC+SDA
  VER: 0xFF BL: 0x03 [PRELOADER PORT]
AGENT: AUTO: 0_base: base_v2216
  [3365c4d2] C:\InfinityBox\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6765
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
  Reset Interface
PTFN: MediaTek USB Port (COM26)
MODE [0]: BOOTROM; PORT: 26
Waiting for BOOT ACK...
BROM: Skip ACK verication
BROM: Init... Ok
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
  CODE: Cervino
  TYPE: MODERN  [RAPHAEL]
  MEID: F67CE4676F0B37B2160EAC8DFC571439
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
  VER: 0x05 BL: 0xFE [BOOTROM]
  SOCID: 241E7A02DAA91DCE9D2C59992F082EC8290E0889660352B93680DBB805281B89
SLA: Local Auth
SLA: Start Auth Ok
SLA: Continue Auth Ok
EMI known
SLA: Start 0x15
SLA: Auth Passed; SEC: 0x000000E0
EMI loaded by MEID: F67CE4676F0B37B2160EAC8DFC571439
AGENT: AUTO: 0_base: base_v2216
  [3365c4d2] C:\InfinityBox\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6765
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
  DA sent
Jump to DA... Ok
DA: Sync...
DA: AGENT started
DA: SYNC
  MODE: BROM
  EXT_RAM NOT initialized
EMMC CID: 150100515836334D42007390CC0A5797
  VEN: Samsung OEM: 256 ID: 515836334D42 [QX63MB] PRV: 0x00
  SNN: 1938869258 [0x7390CC0A]
  MM/YY: 5/2020

EMI: Init Ok
EMI: FireFly preloader_s96116ra1.bin with 8 memory type(s)
  1. eMMC DDR3 ID: 150100514436334D42   Ven: Samsung   | Dev: QD63MB RAM: 2.00 Gb
  2. eMMC DDR3 ID: 700100464D42434541   Ven: Kingston  | Dev: FMBCEA RAM: 2.00 Gb
  3. eMMC DDR3 ID: 150100474436424D42   Ven: Samsung   | Dev: GD6BMB RAM: 3.00 Gb
  4. eMMC DDR3 ID: 150100515836334D42   Ven: Samsung   | Dev: QX63MB RAM: 2.00 Gb
  5. eMMC DDR3 ID: 150100515836334142   Ven: Samsung   | Dev: QX63AB RAM: 2.00 Gb
  6. eMMC DDR3 ID: 150100475836424142   Ven: Samsung   | Dev: GX6BAB RAM: 3.00 Gb
  7. eMMC DDR3 ID: 150100475836424D42   Ven: Samsung   | Dev: GX6BMB RAM: 3.00 Gb
  8. eMMC DDR3 ID: 90014A68423861503E   Ven: Hynix     | Dev: hB8aP> RAM: 2.00 Gb
EMI: EXT_RAM CFG Passed
DA: Boot to 2nd DA...
  2nd stage confirmed
DA: SYNC passed

Load HW info...
RAM: SRAM: 0x0003A000 [ 232.00 Kb ]
RAM: DRAM: 0x80000000 [ 2.00 Gb ]

EMMC CID: 150100515836334D42007390CC0A5797
  VEN: Samsung OEM: 256 ID: 515836334D42 [QX63MB] PRV: 0x00
  SNN: 1938869258 [0x7390CC0A]
  MM/YY: 5/2020
  BOOT1: 0x00400000 [ 4.00 Mb ]
  BOOT2: 0x00400000 [ 4.00 Mb ]
  RPMB: 0x01000000 [ 16.00 Mb ]
  USER: 0x747C00000 [ 29.12 Gb ]

CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
  CODE: Cervino
  TYPE: MODERN  [RAPHAEL]
  RNID: 6CD5139720B550DB24CF3CF1513316EF
  MEID: F67CE4676F0B37B2160EAC8DFC571439

USB: HIGH-SPEED
Boot done MODERN  [RAPHAEL]

Analyze PMT...
Loaded 0x8000 bytes
PMT: PGPT [0x64] Records: 39
Strategy: [none|generic]
Stage : ANDROID OS 
[1] Process RESET PROTECTION... Ok
[2] Verified
Stage : FRP 
[1] Process...
Done: 00:00:23
Reconnect Power/Cable now
  Reply With Quote
Old 09-06-2023, 11:51   #74897 (permalink)
No Life Poster
 
Tanha0321's Avatar
 
Join Date: Jul 2006
Location: Pakistan karachi
Posts: 9,914
Member: 314003
Status: Offline
Thanks Meter: 3,004
Infinix PR652B Frp
Code:
Product Brand  : Infinix
Product Device : PR652B
Product Model  : Infinix PR652B
Product Name   : PR652B
Patch Level    : RP1A.201005.001
Display ID     : PR652B-F6317-11.0-OP-V036-20210708
Ver. Incmt     : OP-V036-20210708
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2021-05-05
Build Time     : 08.07.2021
Product Name   : F6317
Product Device : Infinix-PR652B
Product Info   : PR652B
Product Board  : PR652B
Board Platform : sp9863a
Product Manfct : Infinix


NVMng  : SecurityInfo 
IMEI[1] : 
IMEI[2] : 
IMEI[3] : 

SEC : SLS:0, SKS:0, SKV:4

Platform Version: MOCORTM_20A_W21.15.3_P5_Debug
Project Version:   sharkl3_pub
BASE  Version:    4G_MODEM_20A_W21.15.3_P5
HW Version:        sc9863A_modem
CMP_Time : 05-11-2021 10:59:41

MODEM TAG : MOCORTM_20A_W21.15.3_P5_Debug_4G_MODEM_20A_W21.15.3_P5_sc9863A_modem_sharkl3_pub

USERDATA : FILESYSTEM : F2FS  with FBE ( File-Base Encryption )

 - > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:01:03

Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : Infinix : infinix-pr652b.f94d6017.1c9d2ca0
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0020
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ... 
FDL : SEC : RSA auth passed!
FDL : Control transfered!

Boot Done!

Wipe Ok : FRP

Reconnect Power/Cable!

Done!
Elapsed: 00:00:18
  Reply With Quote
Old 09-06-2023, 11:55   #74898 (permalink)
No Life Poster
 
Tanha0321's Avatar
 
Join Date: Jul 2006
Location: Pakistan karachi
Posts: 9,914
Member: 314003
Status: Offline
Thanks Meter: 3,004
Infinix-X680B Format & Frp
Code:
Operation: Reset Settings/Format FS [ v2.45 ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Format: SMART RESET
Wait...
WARNING: Format FS WILL RESET ALL USER DATA! 
Make sure about correct format mode selection!
Continue? Yes
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek USB Port (COM6)
MODE [0]: BOOTROM; PORT: 6
Waiting for BOOT ACK...
BROM: Skip ACK verication
BROM: Init... Ok
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
  CODE: Cervino
  TYPE: MODERN  [RAPHAEL]
  MEID: 7D2FBD04058EA6F4B23E81EDB9F85B9A
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
  VER: 0x05 BL: 0xFE [BOOTROM]
  SOCID: 5564513409855D96FF2EA8629774427A53755F4445525413E59BD2F8C1BF1486
SLA: Local Auth
SLA: Start Auth Ok
SLA: Continue Auth Ok
EMI known
SLA: Start 0x15
SLA: Auth Passed; SEC: 0x000000E0
EMI loaded by MEID: 7D2FBD04058EA6F4B23E81EDB9F85B9A
AGENT: AUTO: 0_base: base_v2216
  [3365c4d2] C:\InfinityBox\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6765
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
  DA sent
Jump to DA... Ok
DA: Sync...
DA: AGENT started
DA: SYNC
  MODE: BROM
  EXT_RAM NOT initialized
EMMC CID: 15010044503644414203F79E68E04725
  VEN: Samsung OEM: 256 ID: 445036444142 [DP6DAB] PRV: 0x03
  SNN: 4154353888 [0xF79E68E0]
  MM/YY: 4/2020

EMI: Init Ok
EMI: FireFly preloader_x680b_h6215.bin with 17 memory type(s)
  1. eMMC LP_DDR4X ID: 90014A684445615033   Ven: Hynix     | Dev: hDEaP3 RAM: 6.00 Gb
  2. eMMC LP_DDR4X ID: 150100444836444D42   Ven: Samsung   | Dev: DH6DMB RAM: 4.00 Gb
  3. eMMC LP_DDR4X ID: 150100444836444142   Ven: Samsung   | Dev: DH6DAB RAM: 4.00 Gb
  4. eMMC LP_DDR4X ID: 150100334836434142   Ven: Samsung   | Dev: 3H6CAB RAM: 6.00 Gb
  5. eMMC LP_DDR4X ID: 150100335636434D42   Ven: Samsung   | Dev: 3V6CMB RAM: 6.00 Gb
  6. eMMC LP_DDR4X ID: 90014A484347386134   Ven: Hynix     | Dev: HCG8a4 RAM: 4.00 Gb
  7. eMMC LP_DDR4X ID: 90014A484347386134   Ven: Hynix     | Dev: HCG8a4 RAM: 6.00 Gb
  8. eMMC LP_DDR4X ID: 90014A68433861503E   Ven: Hynix     | Dev: hC8aP> RAM: 4.00 Gb
  9. eMMC LP_DDR4X ID: 90014A68433861503E   Ven: Hynix     | Dev: hC8aP> RAM: 6.00 Gb
  10. eMMC LP_DDR4X ID: 90014A684339615033   Ven: Hynix     | Dev: hC9aP3 RAM: 4.00 Gb
  11. eMMC LP_DDR4X ID: 90014A68433861503E   Ven: Hynix     | Dev: hC8aP> RAM: 3.00 Gb
  12. eMMC LP_DDR4X ID: 150100445036384D42   Ven: Samsung   | Dev: DP68MB RAM: 3.00 Gb
  13. eMMC LP_DDR4X ID: 13014E53304A394B39   Ven: Micron    | Dev: S0J9K9 RAM: 4.00 Gb
  14. eMMC LP_DDR4X ID: 150100445636444142   Ven: Samsung   | Dev: DV6DAB RAM: 4.00 Gb
  15. eMMC LP_DDR4X ID: 150100445036444142   Ven: Samsung   | Dev: DP6DAB RAM: 4.00 Gb
  16. eMMC LP_DDR4X ID: 150100445636444D42   Ven: Samsung   | Dev: DV6DMB RAM: 4.00 Gb
  17. eMMC LP_DDR4X ID: 150100444436384D42   Ven: Samsung   | Dev: DD68MB RAM: 3.00 Gb
EMI: EXT_RAM CFG Passed
DA: Boot to 2nd DA...
  2nd stage confirmed
DA: SYNC passed

Load HW info...
SRAM: 0x0003A000 [ 232.00 Kb ]
DRAM: 0x100000000 [ 4.00 Gb ]

EMMC CID: 15010044503644414203F79E68E04725
  VEN: Samsung OEM: 256 ID: 445036444142 [DP6DAB] PRV: 0x03
  SNN: 4154353888 [0xF79E68E0]
  MM/YY: 4/2020
  BOOT1: 0x00400000 [ 4.00 Mb ]
  BOOT2: 0x00400000 [ 4.00 Mb ]
  RPMB: 0x01000000 [ 16.00 Mb ]
  USER: 0xE8F800000 [ 58.24 Gb ]

CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
  CODE: Cervino
  TYPE: MODERN  [RAPHAEL]
  RNID: C73BE571FDE939964A3A9366681E91FE
  MEID: 7D2FBD04058EA6F4B23E81EDB9F85B9A

USB: HIGH-SPEED
Boot done MODERN  [RAPHAEL]

Analyze PMT...
Loaded 0x8000 bytes
PMT: PGPT [0x64] Records: 41
Select info source... Ok
  SW: Infinix/X680B-OP/Infinix-X680B:10/QP1A.190711.020/EFIJ-OP-210804V255:user/release-keys
  Product Brand: Infinix
  Product Device: Infinix-X680B
  Product Model: Infinix X680B
  Product Name: X680B-OP
  Patch Level: QP1A.190711.020
  Display ID: X680B-H6215EFIJ-Q-OP-210804V255
  SW Version: EFIJ-OP-210804V255
  Ver. CodeName: REL
  Ver. Release: 10
  Sec. Patch: 2021-08-05
  Build Time: 8/4/2021 10:51:45 AM
  CPU: arm64-v8a,armeabi-v7a,armeabi
  CPU: armeabi-v7a,armeabi
  CPU: arm64-v8a
  Product Info: x680b_h6215
  SW: full_x680b_h6215-user 10 QP1A.190711.020 140253 release-keys
  Product Board: Infinix-X680B
  Board Platform: mt6765
  Product Manfct: INFINIX MOBILITY LIMITED
Strategy: [none|generic]
SmartInfo: Android Ver: 10 UserDataFS: 0x03 [f2fs] CacheFS: 0x02 [ext4|8+]

Stage a: SMART RESET
[1] Process RESET PROTECTION... Ok
[2] Process USERDATA... Ok
[3] Process CACHE... Ok
[4] Verified
[5] Verified
[6] Process USERDATA... Ok
[7] Process USERDATA... Ok
Stage b: SMART RESET
[1] Verified
[2] Verified
Stage c: SMART RESET
Stage d: SMART RESET
Done: 00:00:44
Reconnect Power/Cable now
  Reply With Quote
Old 09-06-2023, 11:56   #74899 (permalink)
No Life Poster
 
Tanha0321's Avatar
 
Join Date: Jul 2006
Location: Pakistan karachi
Posts: 9,914
Member: 314003
Status: Offline
Thanks Meter: 3,004
TECNO BB4k Format & Frp
Code:
Operation: Reset Settings/Format FS [ v2.45 ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Format: SMART RESET
Wait...
WARNING: Format FS WILL RESET ALL USER DATA! 
Make sure about correct format mode selection!
Continue? Yes
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM (Android) (COM3)
MODE [0]: PRELOADER PORT; PORT: 3
Waiting for BOOT ACK...
PRELOADER ACK Ok
BROM: Init... Ok
CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717
  CODE: Merlot
  TYPE: MODERN  [RAPHAEL]
BROM: Sec Level: 0x00000005 Mode: SBC+SDA
  VER: 0xFF BL: 0x03 [PRELOADER PORT]
AGENT: AUTO: 0_base: base_v2216
  [3365c4d2] C:\InfinityBox\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6761
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
  Reset Interface
PTFN: MediaTek USB Port (COM6)
MODE [0]: BOOTROM; PORT: 6
Waiting for BOOT ACK...
BROM: Skip ACK verication
BROM: Init... Ok
CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717
  CODE: Merlot
  TYPE: MODERN  [RAPHAEL]
  MEID: E77526DC45CF49E65A18394CFC2FFB84
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
  VER: 0x05 BL: 0xFE [BOOTROM]
  SOCID: E58B9E8A43EBC62DB0EFF37A0364917A62A00BD7C599C2E7D94580C236F70113
SLA: Local Auth
SLA: Start Auth Ok
SLA: Continue Auth Ok
EMI known
SLA: Start 0x15
SLA: Auth Passed; SEC: 0x000000E0
EMI loaded by MEID: E77526DC45CF49E65A18394CFC2FFB84
AGENT: AUTO: 0_base: base_v2216
  [3365c4d2] C:\InfinityBox\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6761
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
  DA sent
Jump to DA... Ok
DA: Sync...
DA: AGENT started
DA: SYNC
  MODE: BROM
  EXT_RAM NOT initialized
EMMC CID: 150100514436334D4201B160D4AC1751
  VEN: Samsung OEM: 256 ID: 514436334D42 [QD63MB] PRV: 0x01
  SNN: 2975913132 [0xB160D4AC]
  MM/YY: 1/2020

EMI: Init Ok
EMI: FireFly preloader_bb4k_h6114.bin with 13 memory type(s)
  1. eMMC DDR3 ID: 90014A68423861503E   Ven: Hynix     | Dev: hB8aP> RAM: 3.00 Gb
  2. eMMC DDR3 ID: FE014A333232344433   Ven: Micron    | Dev: 3224D3 RAM: 3.00 Gb
  3. eMMC DDR3 ID: 90014A484347386134   Ven: Hynix     | Dev: HCG8a4 RAM: 4.00 Gb
  4. eMMC DDR3 ID: 150100514536334D42   Ven: Samsung   | Dev: QE63MB RAM: 2.00 Gb
  5. eMMC DDR3 ID: 150100464536324D42   Ven: Samsung   | Dev: FE62MB RAM: 1.00 Gb
  6. eMMC DDR3 ID: 90014A484147346132   Ven: Hynix     | Dev: HAG4a2 RAM: 2.00 Gb
  7. eMMC DDR3 ID: 150100514436334D42   Ven: Samsung   | Dev: QD63MB RAM: 2.00 Gb
  8. eMMC DDR3 ID: 90014A68423861503E   Ven: Hynix     | Dev: hB8aP> RAM: 2.00 Gb
  9. eMMC DDR3 ID: 700100464D42434541   Ven: Kingston  | Dev: FMBCEA RAM: 2.00 Gb
  10. eMMC DDR3 ID: 150100524836344142   Ven: Samsung   | Dev: RH64AB RAM: 4.00 Gb
  11. eMMC DDR3 ID: 700100464D41454538   Ven: Kingston  | Dev: FMAEE8 RAM: 1.00 Gb
  12. eMMC DDR3 ID: 150100474436424D42   Ven: Samsung   | Dev: GD6BMB RAM: 3.00 Gb
  13. eMMC DDR3 ID: 150100515836334142   Ven: Samsung   | Dev: QX63AB RAM: 2.00 Gb
EMI: EXT_RAM CFG Passed
DA: Boot to 2nd DA...
  2nd stage confirmed
DA: SYNC passed

Load HW info...
SRAM: 0x0003A500 [ 233.25 Kb ]
DRAM: 0x80000000 [ 2.00 Gb ]

EMMC CID: 150100514436334D4201B160D4AC1751
  VEN: Samsung OEM: 256 ID: 514436334D42 [QD63MB] PRV: 0x01
  SNN: 2975913132 [0xB160D4AC]
  MM/YY: 1/2020
  BOOT1: 0x00400000 [ 4.00 Mb ]
  BOOT2: 0x00400000 [ 4.00 Mb ]
  RPMB: 0x01000000 [ 16.00 Mb ]
  USER: 0x747C00000 [ 29.12 Gb ]

CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0717
  CODE: Merlot
  TYPE: MODERN  [RAPHAEL]
  RNID: 223273D6EC13DD32C7002A378FA5E1A4
  MEID: E77526DC45CF49E65A18394CFC2FFB84

USB: HIGH-SPEED
Boot done MODERN  [RAPHAEL]

Analyze PMT...
Loaded 0x8000 bytes
PMT: PGPT [0x64] Records: 38
Select info source... Ok
  Patch Level: PPR1.180610.011
  Display ID: BB4k-H6114UVW-PGo-200915V98
  SW Version: UVW-200915V98
  Ver. CodeName: REL
  Ver. Release: 9
  Sec. Patch: 2020-09-05
  Build Time: 9/15/2020 4:48:51 AM
  Product Model: TECNO BB4k
  Product Brand: TECNO
  Product Name: H6114
  Product Device: TECNO-BB4k
  CPU: armeabi-v7a,armeabi
  Product Manfct: TECNO MOBILE LIMITED
  Product Info: bb4k_h6114
  SW: full_bb4k_h6114-user 9 PPR1.180610.011 39780 release-keys
  Product Board: TECNO-BB4k
  Board Platform: mt6761
Strategy: [none|generic]
SmartInfo: Android Ver: 9 UserDataFS: 0x03 [f2fs] CacheFS: 0x02 [ext4|8+]

Stage a: SMART RESET
[1] Process RESET PROTECTION... Ok
[2] Process USERDATA... Ok
[3] Process CACHE... Ok
[4] Verified
[5] Verified
[6] Process USERDATA... Ok
[7] Verified
Stage b: SMART RESET
[1] Verified
[2] Verified
Stage c: SMART RESET
Stage d: SMART RESET
Done: 00:00:38
Reconnect Power/Cable now
  Reply With Quote
Old 09-06-2023, 15:16   #74900 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,997
Member: 2644066
Status: Offline
Thanks Meter: 1,778
Nokia 105 ta 1174 spd rda8851l read flash file done by cm2
Card found : 73CA70CC , v0156
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.07

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]


Operation : Read Flash [ v1.07 ]

----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x00600000
BOOT_INIT : 0x81C0024C
BOOT_MODE : DOWNLOAD
Setting BOOTROM mode
BOOT_MODE : BOOTROM
Boot_CPU : 0x88094007 : [RDA] : RDA8851L
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x161660C8 : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV : 0xFBA2A2E0
Boot done!

Read done, 0x00400000

Verify FlashContent
MCU verified
CAL verified
FAC verified

Device Info Details :
[0] : 8851A_F751_235A_EN_AR_PE_UR
[1] : 8809
[2] : CT8851A
[3] : pasw_rda6625
[4] : flsh_spi32m
[5] : gc9106/st7735/rm68110/gc9101/ili9163/nv3023
[6] : rdafm_8809
[7] : 20230321Tue1016
[8] : BV5

Saved to : C:\Users\Master Mobile\Desktop\
Saved as : RDA8851_4MiB_8851A_F751_235A_EN_AR_PE_UR_BV5_20230 321Tue1016.ilod

inf_usb-dll:err [_usb_read_async] timeout error


Done!
Elapsed: 00:02:41

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to A.G.Shahid For This Useful Post:
Old 09-06-2023, 15:22   #74901 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,997
Member: 2644066
Status: Offline
Thanks Meter: 1,778
Samsung A03 Reset Pattern & Frp Done By CM2
Card found : 73CA70CC , v0156
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : samsung : sm-a035f_ums9230
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP

Reconnect Power/Cable!

Done!
Elapsed: 00:00:21
  Reply With Quote
Old 09-06-2023, 15:23   #74902 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,997
Member: 2644066
Status: Offline
Thanks Meter: 1,778
Realme c21y reset pattern & frp done by cm2
Card found : 73CA70CC , v0156
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Realme : C21Y_C25Y_RMX3261_RMX3262_RMX3263
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP

Reconnect Power/Cable!

Done!
Elapsed: 00:00:20
  Reply With Quote
Old 09-07-2023, 03:45   #74903 (permalink)
Freak Poster
 
homer3706's Avatar
 
Join Date: Sep 2016
Location: GSMPIONEER PHP
Posts: 249
Member: 2623988
Status: Offline
Sonork: 100.1678253
Thanks Meter: 302
Realme C11 RMX2185 Smart Reset
Identify

Code:
Operation: Identify Device [ v2.49a3 (beta) ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Mode: FLASH
Port: Both [ B + P ]
[+] Read deep info: PRL, HW, DEBUG
[+] Auto-EMI
[+] FireFly-Over-DA extended protocol 
[+] Vendor-Specific Analyzer
[-] Local SLA
[-] Force BROM
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek USB Port_V1633 (COM3)
MODE [0]: BOOTROM; PORT: 3
Waiting for BOOT ACK...
BROM: Init...
Ok
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
  CODE: Cervino
  TYPE: MODERN  [RAPHAEL]
  MEID: 8CE7DC89B5E12053AAA77DBF3A73D523
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
  VER: 0x05 BL: 0xFE [BOOTROM]
  SOCID: DF3AD565B1E485D777A1A6D247885645F2B77E56008EBBDCD25EE4F6D01401D3
SLA: Local Auth
SLA: Start Auth
Ok
SLA: Continue Auth
Ok
FF: Looking for EMI
Found
SLA: Start
0x15
SLA: Auth Passed; SEC: 0x000000E0
EMI loaded by MEID: 8CE7DC89B5E12053AAA77DBF3A73D523
AGENT: AUTO: 0_base: base_v2216
  [3365c4d2] C:\InfinityBox\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6765
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
  DA sent
Jump to DA...
Ok
DA: Sync...
DA: AGENT started
DA: SYNC
  MODE: BROM
  EXT_RAM NOT initialized
EMMC CID: 1501003458364B4D4203AC33CAA03763
crc Ok
  Ven: Samsung OEM: 256 ID: 3458364B4D42 [4X6KMB] PRV: 0x03
  SNN: 2889075360 [0xAC33CAA0]
  MM/YY: 3/2020

EMI: Init Ok
EMI: FireFly preloader_oppo6765.bin with 10 memory type(s)
  1. eMMC LP_DDR4X ID: 1501003458364B4D42   Samsung   4X6KMB RAM: 2.00 Gb
  2. eMMC LP_DDR4X ID: 90014A68423861503E   Hynix     hB8aP> RAM: 3.00 Gb
  3. eMMC LP_DDR4X ID: 90014A68423861503E   Hynix     hB8aP> RAM: 2.00 Gb
  4. eMMC LP_DDR4X ID: 150100445036384D42   Samsung   DP68MB RAM: 3.00 Gb
  5. eMMC LP_DDR4X ID: 13014E47314A395238   Micron    G1J9R8 RAM: 4.00 Gb
  6. eMMC LP_DDR4X ID: 150100445836384D42   Samsung   DX68MB RAM: 3.00 Gb
  7. eMMC LP_DDR4X ID: 150100444836444142   Samsung   DH6DAB RAM: 4.00 Gb
  8. eMMC LP_DDR4X ID: 13014E47314A395339   Micron    G1J9S9 RAM: 4.00 Gb
  9. eMMC LP_DDR4X ID: 150100445636444D42   Samsung   DV6DMB RAM: 4.00 Gb
  10. eMMC LP_DDR4X ID: 450100444134313238   Sandisk   DA4128 RAM: 4.00 Gb
EMI: EXT_RAM CFG Passed
DA: Boot to 2nd DA...
  2nd stage confirmed
DA: SYNC passed

Load HW info...
RAM: SRAM: 0x0003A000 [ 232.00 Kb ]
RAM: DRAM: 0x80000000 [ 2.00 Gb ]

EMMC CID: 1501003458364B4D4203AC33CAA03763
crc Ok
  Ven: Samsung OEM: 256 ID: 3458364B4D42 [4X6KMB] PRV: 0x03
  SNN: 2889075360 [0xAC33CAA0]
  MM/YY: 3/2020
  BOOT1: 0x00400000 [ 4.00 Mb ]
  BOOT2: 0x00400000 [ 4.00 Mb ]
  RPMB: 0x00400000 [ 4.00 Mb ]
  USER: 0x747C00000 [ 29.12 Gb ]

CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
  CODE: Cervino
  TYPE: MODERN  [RAPHAEL]
  RNID: AF1D616D7CE6CBD8F04E552E77200E86
  MEID: 8CE7DC89B5E12053AAA77DBF3A73D523

USB: HIGH-SPEED
Boot done MODERN  [RAPHAEL]

Analyze PMT...
Ok
PMT: PGPT [0x64] Records: 47
Select info source...
Ok
  Patch Level: QP1A.190711.020
  Display ID: QP1A.190711.020 release-keys
  Ver. CodeName: REL
  Ver. Release: 10
  Sec. Patch: 2022-08-05
  Build Time: 8/1/2022 10:23:38 AM
  CPU: arm64-v8a,armeabi-v7a,armeabi
  CPU: armeabi-v7a,armeabi
  CPU: arm64-v8a
  Product Info: oppo6765
  SW: full_oppo6765-user 10 QP1A.190711.020 bedd37e98646d3a1 release-keys

Strategy: [oppo]
Firmware ID: MT6765_OSv10_QP1A.190711.020_oppo6765.MT6765_RMX2185_11_A.71_200825_81a0eb21
Verify firmware [MT6765_OSv10_QP1A.190711.020_oppo6765.MT6765_RMX2185_11_A.71_200825_81a0eb21]...
Finished

Analyze userdata...
userData: fileSystem [ext4]  with FBE [file based encryption]

Analyze modem...
OPPO6765_206A1_MDBIN_PCB01_MT6765_S00.MOLY_LR12A_R2_TC16_Q_G35_PR1_SP_V1_P50
Analyze nvram...
NVRAM: Items: 0xAA Size: 0x08C87A State: Ok
  WiFi MAC: BC2DEFED0879
  BlTh MAC: BC2DEFED0878
Verify device config...
Finished
Backup to C:\InfinityBox\CM2MT2\backup\MT6765__8CE7DC89B5E12053AAA77DBF3A73D523\
Items to check: 20
Read [31] NVRAM
Read [14] NVDATA
Read [22] PROINFO
Read [36] LK
Read [13] NVCFG
Read [17] PROTECT1
Read [1] PGPT
Read [20] PERSIST
Read [0] PRELOADER
Read [7] OPPORESERVE3
Read [8] OPPO_CUSTOM
Read [35] OCDT
ZERO CONTENT file [8.00 Mb] deleted: C:\InfinityBox\CM2MT2\backup\MT6765__8CE7DC89B5E12053AAA77DBF3A73D523\ocdt.bin
Read [32] CDT_ENGINEERING
Done 12 files
Compress: C:\InfinityBox\CM2MT2\backup\MT6765__8CE7DC89B5E12053AAA77DBF3A73D523\
Cleanup...
Ok
Verify C:\InfinityBox\CM2MT2\backup\MT6765__8CE7DC89B5E12053AAA77DBF3A73D523.7z
Finished

STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : UNLOCKED!
STORAGE : RPMB Status : eMMC : RPMB  KEY PROGRAMMED [UNUSABLE]

Analyze preloader...
EMI: MT6765 preloader_oppo6765.bin with 10 memory type(s)
  1. eMMC LP_DDR4X ID: 1501003458364B4D42   Samsung   4X6KMB RAM: 2.00 Gb
  2. eMMC LP_DDR4X ID: 90014A68423861503E   Hynix     hB8aP> RAM: 3.00 Gb
  3. eMMC LP_DDR4X ID: 90014A68423861503E   Hynix     hB8aP> RAM: 2.00 Gb
  4. eMMC LP_DDR4X ID: 150100445036384D42   Samsung   DP68MB RAM: 3.00 Gb
  5. eMMC LP_DDR4X ID: 13014E47314A395238   Micron    G1J9R8 RAM: 4.00 Gb
  6. eMMC LP_DDR4X ID: 150100445836384D42   Samsung   DX68MB RAM: 3.00 Gb
  7. eMMC LP_DDR4X ID: 150100444836444142   Samsung   DH6DAB RAM: 4.00 Gb
  8. eMMC LP_DDR4X ID: 13014E47314A395339   Micron    G1J9S9 RAM: 4.00 Gb
  9. eMMC LP_DDR4X ID: 150100445636444D42   Samsung   DV6DMB RAM: 4.00 Gb
  10. eMMC LP_DDR4X ID: 450100444134313238   Sandisk   DA4128 RAM: 4.00 Gb
Preloader exist: C:\InfinityBox\CM2MT2\backup\preloader\preloader_oppo6765.bin
Verify C:\InfinityBox\CM2MT2\backup\preloader\preloader_oppo6765.bin [32bb7f00]...
Finished
Analyze storage layout...
Found 27 item(s)
Verify MDM...
Nothing found
Verify network config...
Ok
Done: 00:01:20
Reconnect Power/Cable now
Smart Reset

Code:
Operation: Reset Settings/Format FS [ v2.49a3 (beta) ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Format: SMART RESET
Wait...
WARNING: Reset may clear ALL USER DATA! 
Continue? Yes
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek USB Port_V1633 (COM3)
MODE [0]: BOOTROM; PORT: 3
Waiting for BOOT ACK...
BROM: Init... Ok
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
  CODE: Cervino
  TYPE: MODERN  [RAPHAEL]
  MEID: 8CE7DC89B5E12053AAA77DBF3A73D523
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
  VER: 0x05 BL: 0xFE [BOOTROM]
  SOCID: DF3AD565B1E485D777A1A6D247885645F2B77E56008EBBDCD25EE4F6D01401D3
SLA: Local Auth
SLA: Start Auth Ok
SLA: Continue Auth Ok
EMI known
SLA: Start 0x15
SLA: Auth Passed; SEC: 0x000000E0
EMI loaded by MEID: 8CE7DC89B5E12053AAA77DBF3A73D523
AGENT: AUTO: 0_base: base_v2216
  [3365c4d2] C:\InfinityBox\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6765
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
  DA sent
Jump to DA... Ok
DA: Sync...
DA: AGENT started
DA: SYNC
  MODE: BROM
  EXT_RAM NOT initialized
EMMC CID: 1501003458364B4D4203AC33CAA03763 crc Ok
  Ven: Samsung OEM: 256 ID: 3458364B4D42 [4X6KMB] PRV: 0x03
  SNN: 2889075360 [0xAC33CAA0]
  MM/YY: 3/2020

EMI: Init Ok
EMI: FireFly preloader_oppo6765.bin with 10 memory type(s)
  1. eMMC LP_DDR4X ID: 1501003458364B4D42   Samsung   4X6KMB RAM: 2.00 Gb
  2. eMMC LP_DDR4X ID: 90014A68423861503E   Hynix     hB8aP> RAM: 3.00 Gb
  3. eMMC LP_DDR4X ID: 90014A68423861503E   Hynix     hB8aP> RAM: 2.00 Gb
  4. eMMC LP_DDR4X ID: 150100445036384D42   Samsung   DP68MB RAM: 3.00 Gb
  5. eMMC LP_DDR4X ID: 13014E47314A395238   Micron    G1J9R8 RAM: 4.00 Gb
  6. eMMC LP_DDR4X ID: 150100445836384D42   Samsung   DX68MB RAM: 3.00 Gb
  7. eMMC LP_DDR4X ID: 150100444836444142   Samsung   DH6DAB RAM: 4.00 Gb
  8. eMMC LP_DDR4X ID: 13014E47314A395339   Micron    G1J9S9 RAM: 4.00 Gb
  9. eMMC LP_DDR4X ID: 150100445636444D42   Samsung   DV6DMB RAM: 4.00 Gb
  10. eMMC LP_DDR4X ID: 450100444134313238   Sandisk   DA4128 RAM: 4.00 Gb
EMI: EXT_RAM CFG Passed
DA: Boot to 2nd DA...
  2nd stage confirmed
DA: SYNC passed

Load HW info...
RAM: SRAM: 0x0003A000 [ 232.00 Kb ]
RAM: DRAM: 0x80000000 [ 2.00 Gb ]

EMMC CID: 1501003458364B4D4203AC33CAA03763 crc Ok
  Ven: Samsung OEM: 256 ID: 3458364B4D42 [4X6KMB] PRV: 0x03
  SNN: 2889075360 [0xAC33CAA0]
  MM/YY: 3/2020
  BOOT1: 0x00400000 [ 4.00 Mb ]
  BOOT2: 0x00400000 [ 4.00 Mb ]
  RPMB: 0x00400000 [ 4.00 Mb ]
  USER: 0x747C00000 [ 29.12 Gb ]

CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
  CODE: Cervino
  TYPE: MODERN  [RAPHAEL]
  RNID: AF1D616D7CE6CBD8F04E552E77200E86
  MEID: 8CE7DC89B5E12053AAA77DBF3A73D523

USB: HIGH-SPEED
Boot done MODERN  [RAPHAEL]

Analyze PMT... Ok
PMT: PGPT [0x64] Records: 47
Select info source... Ok
  Patch Level: QP1A.190711.020
  Display ID: QP1A.190711.020 release-keys
  Ver. CodeName: REL
  Ver. Release: 10
  Sec. Patch: 2022-08-05
  Build Time: 8/1/2022 10:23:38 AM
  CPU: arm64-v8a,armeabi-v7a,armeabi
  CPU: armeabi-v7a,armeabi
  CPU: arm64-v8a
  Product Info: oppo6765
  SW: full_oppo6765-user 10 QP1A.190711.020 bedd37e98646d3a1 release-keys
Strategy: [oppo]
SmartInfo: Android Ver: 10 UserDataFS: 0x02 [ext4|8+] CacheFS: 0x02 [ext4|8+]

Verify device config...
Finished
Backup exist: C:\InfinityBox\CM2MT2\backup\MT6765__8CE7DC89B5E12053AAA77DBF3A73D523
Stage: ANDROID OS
[1] Process USERDATA... Ok
[2] Process CACHE... Ok
[3] Verified
[4] Process USERDATA... Ok
[5] Process RESET PROTECTION... Ok
[6] Verified
[7] Process USERDATA... Ok
Stage: FRP
Stage: SMART
Done: 00:00:55
Reconnect Power/Cable now
  Reply With Quote
The Following User Says Thank You to homer3706 For This Useful Post:
Old 09-07-2023, 13:43   #74904 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Sindh Pakistan
Posts: 8,999
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 15,437
Smile Oppo A16 Smart Reset Done
Operation: Reset Settings/Format FS [ v2.49a3 (beta) ]
Platform: FireFly SmartPhone - MT6580/67:35|39|52|53|61|65|68|71
Format: SMART RESET
Wait...
WARNING: Reset may clear ALL USER DATA!
Continue? Yes
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM_V1632 (Android) (COM60)
MODE [0]: PRELOADER PORT; PORT: 60
Waiting for BOOT ACK...
BROM: Init... Ok
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]
BROM: Sec Level: 0x00000005 Mode: SBC+SDA
VER: 0xFF BL: 0x03 [PRELOADER PORT]
PTFN: MediaTek USB Port_V1632 (COM6)
MODE [0]: BOOTROM; PORT: 6
Waiting for BOOT ACK...
BROM: Init... Ok
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]
MEID: 12B8713B6A2EB540112A276837F897A9
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
VER: 0x05 BL: 0xFE [BOOTROM]
SOCID: 38C70C35B5043A9C0615CA495852F5FB9D535AAD2139A8D2DC 3387741A4720B0
FireFly: Init
FireFly: Start Auth Ok
FireFly: Continue Auth Ok
FireFly: Start Ok
FireFly: Init Core Ok
FireFly: Running: v06.05.06 on MT6765
eMMC init passed

File exist, skip: C:\InfinityBox\CM2MT2\backup\ext_csd\MT6765__Hynix _hC8aP_5.1_extcsd_07092023.bin
EMMC CID: 90014A68433861503E0310690E3F8833 crc Ok
Ven: Hynix OEM: 330 ID: 68433861503E [hC8aP>] PRV: 0x03
SNN: 275320383 [0x10690E3F]
MM/YY: 8/2021
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
USER: 0xE8F800000 [ 58.24 Gb ]

CSD: D02700328F5903FFFFFFFFEF8E400043
TEMP_WRITE_PROTECT: Off
PERM_WRITE_PROTECT: Off

EXTCSD: rev1.8 eMMC 5.1
[CONFIG]: 0x48 0x02 0x01
[PARTITION_CONFIG]: 0x48
[BOOT_BUS_WIDTH]: 0x02
[RST_N_FUNCTION]: 0x01
[PART_S_COMPLETED]: Off
[SIZE]: Market: 64 GB
[SIZE]: Actual: 0xE8F800000 [ 58.24 GB ]
[EOL]: EOL status : Normal (Less than 80% reserved blocks used)
[EOL_A]: SLC status : Not defined
[EOL_B]: MLC status : 0% - 10% used

USB: HIGH-SPEED
Boot done FireFly

Analyze PMT... Ok
PMT: PGPT [0x64] Records: 48
Select info source...
Strategy: [none|generic]
SmartInfo: Android Ver: 11 UserDataFS: 0x03 [f2fs] CacheFS: 0x02 [ext4|8+]

Verify device config...
Finished
Stage: ANDROID OS
[1] Process USERDATA... Ok
[2] Process CACHE... Ok
[3] Verified
[4] Process USERDATA... Ok
[5] Process RESET PROTECTION... Ok
[6] Verified
[7] Process USERDATA... Ok
Stage: FRP
Stage: SMART
Done: 00:02:56
Reconnect Power/Cable now
  Reply With Quote
Old 09-07-2023, 15:41   #74905 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,997
Member: 2644066
Status: Offline
Thanks Meter: 1,778
Qmobile qalandar reset password done by cm2
Card found : 73CA70CC , v0156
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.07

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]


Operation : Reset Settings [ v1.07 ]
----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x00600000
BOOT_INIT : 0x81C0024C
BOOT_MODE : DOWNLOAD
Setting BOOTROM mode
BOOT_MODE : BOOTROM
Boot_CPU : 0x88094009 : [RDA] : RDA8851CL
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x161660C8 : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV : 0xFBA2A2E0
Boot done!

Preparing PMT
Verifying PMT
Erasing 1458176 bytes

FileSystem format done!


Done!
Elapsed: 00:01:08

Reconnect Power/Cable!
  Reply With Quote
Old 09-07-2023, 15:43   #74906 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,997
Member: 2644066
Status: Offline
Thanks Meter: 1,778
Calme cl66 reset password done by cm2
Card found : 73CA70CC , v0156
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.07

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]


Operation : Format FileSystem [ v1.07 ]

1. Power off device
2. Not hold any key on device!
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

Format FFS Done!

Done!
Elapsed: 00:00:18

Reconnect Power/Cable!
  Reply With Quote
Old 09-07-2023, 15:44   #74907 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,997
Member: 2644066
Status: Offline
Thanks Meter: 1,778
E-tachi e10 king hang on logo done by cm2
Card found : 73CA70CC , v0156
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.07

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]


SPRD mode : SC6531 : REV : E000 : NOR : [ 4MB ]

Operation : Format FileSystem [ v1.07 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_0A9 EFD886F7B_NVM.nv

Executing FormatFFS ...
Format FFS Done!

Done!
Elapsed: 00:00:24

Reconnect Power/Cable!
  Reply With Quote
Old 09-07-2023, 15:45   #74908 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,997
Member: 2644066
Status: Offline
Thanks Meter: 1,778
Itel a571l reset frp done by cm2
Card found : 73CA70CC , v0156
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : A571L_A26
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control transfered!

Boot Done!

Wipe Ok : FRP

Reconnect Power/Cable!

Done!
Elapsed: 00:00:19
  Reply With Quote
Old 09-07-2023, 15:46   #74909 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,997
Member: 2644066
Status: Offline
Thanks Meter: 1,778
Itel w5006 reset frp done by cm2
Card found : 73CA70CC , v0156
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : iTel : W5006X-F3112_A17
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control transfered!

Boot Done!

Wipe Ok : FRP

Reconnect Power/Cable!

Done!
Elapsed: 00:00:31
  Reply With Quote
Old 09-07-2023, 15:56   #74910 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 5,997
Member: 2644066
Status: Offline
Thanks Meter: 1,778
Infinix Hot 7 Reset Frp Done By CM2
S/N: 73CA70CC v0156
Chinese Miracle II - MT2 Service Tool v2.48
Init log engine...
Ok
Build directories tree...
Ok
Backup files: C:\InfinityBox\CM2MT2\backup\
Backup files: 0 dirs: 0
Verify device database...
BuiltIn: 28 Custom: 0
Build device list...
Ok
Scan 81 profiles...
Ok
libusb: v1.2.6.0
Init environment...
Ok
Load IDBase v418494 Ok

Reset Mode: Safe Factory Reset via WIPE and reset FRP

Operation: Reset Settings/Format FS [ v2.48 ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Format: FACTORY RESET : WIPE + FRP
Wait...
WARNING: Reset may clear ALL USER DATA!
Continue?
Yes
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM (Android) (COM10)
MODE [0]: PRELOADER PORT; PORT: 10
Waiting for BOOT ACK...
BROM: Init... Ok
CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
TYPE: LEGACY [MTK]
BROM: Sec Level: 0x00000005 Mode: SBC+SDA
VER: 0xFF BL: 0x01 [PRELOADER PORT]
AGENT: AUTO: Infinix: X624
[6fb8a160] C:\InfinityBox\CM2MT2\boot\Infinix\X606D\MTK_AllIn One_DA.bin
Looking for suitable BootChain in DA...
Found MT6580
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
Jump to DA... Ok
DA: Sync...
DA: AGENT started
NAND: DEVICE NOT FOUND
EMMC: OK
CID: 460001154D3236453CB403425F1659D0
DA v4.2.156
DA: DRAM ready
Boot to 2nd DA... Ok
Load HW info...
EMMC CID: 150100464536324D4203B43CD059165F
Ven: Samsung OEM: 256 ID: 464536324D42 [FE62MB] PRV: 0x03
SNN: 3023884377 [0xB43CD059]
MM/YY: 1/2019
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
RPMB: 0x00400000 [ 4.00 Mb ]
USER: 0x3A3E00000 [ 14.56 Gb ]

RAM: SRAM: 0x00020000 [ 128.00 Kb ]
RAM: DRAM: 0x40000000 [ 1.00 Gb ]

CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
TYPE: LEGACY [MTK]
RNID: 95B7A2E62A868153B5ADC5F7595879D4

DA: Status: BLANK FLASH; Boot Style: EMMC FLASH BOOT

USB: HIGH-SPEED
Boot done LEGACY [MTK]

Analyze PMT... Ok
PMT: LGPT [0x06] Records: 31
Select info source... Ok
Patch Level: O11019
Display ID: X624-H8026CDE-OGo-200724V300
SW Version: CDE-200724V300
Ver. CodeName: REL
Ver. Release: 8.1.0
Sec. Patch: 2020-08-05
Build Time: 7/23/2020 4:45:22 PM
Product Brand: Infinix
Product Name: H8026
Product Device: Infinix-X624
Product Info: Infinix-X624
Product Model: Infinix X624
Product Manfct: INFINIX MOBILITY LIMITED
CPU: armeabi-v7a,armeabi
SW: full_x624_h8025-user 8.1.0 O11019 1595522728 release-keys
Product Board: Infinix-X624
Board Platform: mt6580
Strategy: [none|generic]
Verify device config...
Ok
Loaders Ok
Backup to C:\InfinityBox\CM2MT2\backup\MT6580__95B7A2E62A868 153B5ADC5F7595879D4\
Items to check: 20
Read [3] NVRAM
Read [21] NVDATA
Read [2] PROINFO
Read [8] LK
Read [4] PROTECT1
lda-pt: pgpt
Read [6] PERSIST
Read [0] PRELOADER
Done 7 files
Compress: C:\InfinityBox\CM2MT2\backup\MT6580__95B7A2E62A868 153B5ADC5F7595879D4\
Cleanup...
Ok
Verify C:\InfinityBox\CM2MT2\backup\MT6580__95B7A2E62A868 153B5ADC5F7595879D4.7z
Finished
Stage: ANDROID OS
[1] Verified
[2] Process USERDATA... Ok
Done: 00:01:03
Reconnect Power/Cable now
  Reply With Quote
Reply
Page 4994 of 5118 « First 39944494489449444984499149924993 4994 499549964997500450445094 Last »

Bookmarks

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 17:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 11:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 09:03
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 20:17

 



All times are GMT +1. The time now is 04:01.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2025 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.69863 seconds with 10 queries

SEO by vBSEO