Successfully unlocked/repaired phones by Infinity-Box

[saqib2009]

registered to: saqib

Connect phone on selected interface...

Core version : 1.30 Rev : 1.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm237__07.30.mcusw
PPM : rm237__07.30.ppm_b
CNT : rm237__07.30.image_ora_pl_games
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Getting product info...
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response.
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006010C192101001101
CPU ID : RAP3Gv3 , Features : No any extended features
RAP_PUB: 24400007A0918B56D533E735EECF9FDC41A4B69C
CMT_ROOT: BAF3A9C3DBFA8454937DB77F2B8852B1
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
Processing PASUBTOC...
TIME : Boot time : 00:00:05
Reopening the connection...
Waiting for response: 30
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Check data
ADL : Data accepted
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing rm237__07.30.mcusw
Found 9 areas to erase
Erasing area 0x00000000 - 0x000006BF, NOR, CMT
Result: 0000
Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT
Result: 0000
Erasing area 0x00020000 - 0x0007FFFF, NOR, CMT
Result: 0000
Erasing area 0x00080000 - 0x000DFFFF, NOR, CMT
Result: 0000
Erasing area 0x00100000 - 0x001FFFFF, NOR, CMT
Result: 0000
Erasing area 0x00200000 - 0x0031FFFF, NOR, CMT
Result: 0000
Erasing area 0x00320000 - 0x0105FFFF, NOR, CMT
Result: 0000
Erasing area 0x01060000 - 0x01067FFF, NOR, CMT
Result: 0000
Erasing area 0x01068000 - 0x0107FFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:02:16
Write : Processing rm237__07.30.mcusw
Total 945 [945/0/0] blocks to write, writing...
CMT : Writing Hash CERT [NOLO]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : PAPUBKEYS skip, already sent
CMT : Writing Hash CERT [UPDAPP]
CMT : Writing Hash CERT [DSP0]
CMT : Writing Hash CERT [MCUSW]
CMT : Writing Hash CERT [PMM_CONF]
CMT : Writing Hash CERT [SBIF_CONF]
TIME : Write time : 00:00:46
MCU Write done
===Flashing [PPM]===
Erase : Processing rm237__07.30.ppm_b
Found 1 areas to erase
Erasing area 0x01080000 - 0x0151FFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:00:39
Write : Processing rm237__07.30.ppm_b
Total 205 [205/0/0] blocks to write, writing...
TIME : Write time : 00:00:09
PPM Write done
===Flashing [CNT]===
Erase : Processing rm237__07.30.image_ora_pl_games
Found 1 areas to erase
Erasing area 0x01520000 - 0x01FDFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:02:02
Checking content info...
Resetting phone...
Checking CNT sector PN<>FL
PN CNT sector : 128 kb
ConvertImage: Processing rm237__07.30.image_ora_pl_games
ConvertImage: Page Size is 64K, converting...
ConvertImage: File converted
Loader len: 253888, CHK: 17DB
ADL -> Sending loader...
Reset connection...
ADL : Check data
ADL : Data accepted
ADL : ASIC CMT select Ok
Write : Processing rm237__07.30.image_ora_pl_games_128
Total 296 [296/0/0] blocks to write, writing...
TIME : Write time : 00:00:15
CNT Write done
ADL : End flashing

Flashing done!
Total flash time : 00:06:09
Reboot phone now...

Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Checking User Certificates...
Total - 0 certs
Uploading certificates...
Writen 21 certs!
AfterFlash operations done ;D
Done!

Elapsed: 00:07:06

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Phone disconected!

[sarket]

Black berry 8120 Unlock Done With Best dongle

model: BlackBerry
imei: 35>>>>>>>>>>>>
comment: 35>>>>>>>>>_MEP-16472-001
status: unknown
code 1: MEP2: 8954758078204784
2: MEP4: 3475509350109481

[azeem781986]

N900 Flashing done



Phone Info :
Type : RX-51 , HWRev : 2101
NOLO : 01/0E/14
SWVer: RX-51_2009SE_10.2010.19-1.003_PR_003
Device mode : Production mode

Read info Ok


Processing NOL part
File : RX-51_2009SE_20.2010.36-2.002_PR_COMBINED_002_ARM.bin
Processing : xloader , 1.4.14.9+0m5
Processing : secondary , 1.4.14.9+0m5
NOL part Ok, boot flash done

Processing APE part
File : RX-51_2009SE_20.2010.36-2.002_PR_COMBINED_002_ARM.bin
Processing : kernel , 2.6.28-20103103+0m5
Kernel flash Ok

Processing APE part
File : RX-51_2009SE_20.2010.36-2.002_PR_COMBINED_002_ARM.bin
Processing : rootfs , RX-51_2009SE_20.2010.36-2.002_PR_002
RootFs flash Ok

Processing CMT part
File : RX-51_2009SE_20.2010.36-2.002_PR_COMBINED_002_ARM.bin
Processing : cmt-2nd , BB5_09.36
Processing : cmt-algo , BB5_09.36
Processing : cmt-mcusw , rx51_ICPR82_10w08
CMT part prepare Ok, files are sent
Program CMT request Ok

Switch : OSSO UART+USB
Version : RX-51_2009SE_20.2010.36-2.002_PR_002
Switch CMT request Ok
CMT : Erasing...
CMT : Program...
CMT : Program Finished!

Executing PostFlash : RX-51_2009SE_20.2010.36-2.002_PR_002
Executing PostFlash : Reset RD Flags
Executing PostFlash : Reboot

Done!

[akashub]

checking version...
Apr 01 2009C2806C02B103
Apr 01 2009C2806C02B103
Huawei C2806 Apr 01 2009 selected..
OFFLINE...
downloading mode...
erasing...
patching in progress...
patching in progress 25%...
patching in progress 50%...
patching in progress 75%...
patching in progress 100%...
DONE...
Phones should be restarting now...
Finished, time used: 58 sec

[akashub]

COM11 [VCP0] selected
module v1.65
Device: LG-3500
operation: Repair "Blink"
Phone should be Switched ON !
connecting...
file selected: C:\Documents and Settings\JAI MATA DI\My Documents\Downloads\RD3500\RLC\RD350F08_00.scr
QSC6010-RD3500
QSC6010-RD3500
LG RD3500 selected..
sending boot..
erasing...
done....
FOR EFS 1MB and 4MB ONLY...
Finished, time used: 27 sec

[haroon454]

J5000 format done set on

COM7 [VCP0] selected
module v4.09
Device: _Autodetect MT6253 NOR
Checking data, wait...
Action: reset settings ("format ffs") NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6253:8A02:8A00
status: FF
bbchip bl ver: FE
NOR flash id[0093]: 0089:890300000000 [INTEL] PF38F30xxM0x1xx
chip size: 16Mb
otp status/size: S_DA_NOR_OTP_EXIST/00000108
NAND flash chip: not installed
internal RAM size: 00020000
external RAM: absent
done
Set baudrate (921600)...
done
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 00000000/00000000
detect sec ro...
detect custom parameters...
detect project-id...
project-id: C100V2.JHZ.J5000.UI301.101208.01
detect NOR info...
number of areas/bytes to read: 1:00050000
reading (HW_STORAGE_NOR)...
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: TELSDA53_SLIM_09A_PCB01_GPRS_MT6253_S00.C100V2_JHZ _J5000_UI301_101208_01.BIN
project-id: C100V2.JHZ.J5000.UI301.101208.01, 00000000
code offset: 00000000
ffs offset/size [02]: 00E00000/00200000
rom info structure: [standard] type (07)
TCL-ID is absent
===> done
====================
New firmware found (v.4.09, database date: 18.11.2011):
TELSDA53_SLIM_09A_PCB01_GPRS_MT6253_S00.C100V2_JHZ _J5000_UI301_101208_01.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare ? Secure Data Logistics or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
area size: 16Mb
number of areas/bytes to read: 1:01000000
reading (HW_STORAGE_NOR)...
file saved: C:\InfinityBox\MModule\TELSDA53_SLIM_09A_PCB01_GPR S_MT6253_S00.C100V2_JHZ_J5000_UI301_101208_01__ful lflash_20111120-124252.B0M.bin
Format...
autodetection mode...
Format done
Disconnect...
done
Finished, time used: 9 min 36 sec
Remove/Install battery now !

[saeedullah_khan]

COM2 [Serial2] selected
module v4.09
Device: _Autodetect MT6205-6239 NOR
Checking data, wait...
advanced flash detection enabled
Action: write flash
"smart write" active
write: Firmware
BB33_MULTI_PCB01_GPRS_MT6225_S00.BB33_CY_L11EN_AR_ 320_100129_HX8340_BYD_SA75_2833_CTF_BT_FM_G__Hight el-H869_16m_En_Ru_Fr_Es_Ml_Id_Tr_Hi_Farsi_Pt_Ar.B0M.b in
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:E903:0000
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: EC240200000000:18E59F00000000
flash: Samsung K5L2833ATA T 16Mb
otp offset: 00FF0000
detecting chip #01 in region #00...
flash: EC240200000000:18E59F00000000
flash: Samsung K5L2833ATA T 16Mb
otp offset: 00FF0000
detecting chip #02 in region #00...
flash: EC240200000000:18E59F00000000
flash: Samsung K5L2833ATA T 16Mb
otp offset: 00FF0000
detecting chip #03 in region #00...
flash: EC240200000000:18E59F00000000
flash: Samsung K5L2833ATA T 16Mb
otp offset: 00FF0000
number of flash chip/regions detected: 04/01
Initialize Done
====> Set baud ...
921600
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: [standard] type (04)
TCL-ID is absent
rom info detection finished
rom info ver: 04
sw version: BB33_MULTI_PCB01_GPRS_MT6225_S00.BB33_CY_L11EN_AR_ 320_100129_HX8340_BYD_SA75_2833_CTF_BT_FM_G.BIN
project-id: BB33_CY_L11EN_AR_320_100129_HX8340_BYD_SA75_2833_C TF_BT_FM_G, 00000000
code offset: 00000000
ffs offset/size [01]: 00E00000/00200000
rom info structure: [standard] type (04)
TCL-ID is absent
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
Backup required data Done
====> Patch required data ...
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
sec info (fast) detection...
searching sec info#1...
.
search sec info#1 finished
usb bootloader (file) is absent
startup code area #1 check...
done
detecting startup code area #2...
startup code area #2 is absent
Area: Firmware
flash: EC240200000000:18E59F00000000
Write: Firmware
usb bootloader (file) is absent
sec info (fast) detection...
searching sec info#1...
.
search sec info#1 finished
Write Done
====> Finalization ...
Finalization Done
Finished, time used: 3 min 53 sec
Remove/Install battery now !

[saeedullah_khan]

registered to: saeedullah_khan

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Set phone in Local mode...
Restarting...
Done!

Core version : 1.30 Rev : 1.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-356_60.0.003_prd.core.C00
PPM : RM-356_60.0.003_prd.rofs2.V12
PPM2 : RM-356_60.0.003_C02_prd.rofs3.fpsx
CNT : RM-356_60.0.001_026_000_U01.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Manual mode selected
Backup CRT308 data...
CRT308 Backup Created
SLx Simlock Data read ... ok
SL3 Simlock Sign read ... ok
WMDRM read ... ok
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : D:\InfinityBox_install_BEST_v1.30\Backup\Cert\3537 81047025562_SIM.rpl

Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Gathering phone info...
Check communication with phone...
Batery valtage : 3586 mV
-> Batery voltage less, than 3,8V (3586mV). Continue at user risk
Reboot....
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101031103
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 1230000A9FA80052F1EC35E42B821C586F563702
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: 4B9B75103E691FF8
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing RAP3NAND ...
Processing PASUBTOC ...
Processing PAPUBKEYS...
Processing UPDAPP ...
Boot Done!
TIME : Boot time : 00:00:05
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Auth done...
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing RM-356_60.0.003_prd.core.C00
Found 5 areas to erase
Erasing area 0x00040000 - 0x00082FFF, NAND, CMT
Result: 0000
Erasing area 0x00083400 - 0x003FFFFF, NAND, CMT
Result: 0000
Erasing area 0x00400000 - 0x007FFFFF, NAND, CMT
Result: 0000
Erasing area 0x00800000 - 0x00D5FFFF, NAND, CMT
Result: 0000
Erasing area 0x00D60000 - 0x09E5FFFF, NAND, CMT
Result: 0000
Erase partition 0x0A
Partition erase Ok
Partitioning : Ok [5]
TIME : Erase time : 00:00:00
Write : Processing RM-356_60.0.003_prd.core.C00
Total 510 [510/0/0] blocks to write, writing...
CMT : Writing Hash CERT [ADA]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [RAP3NAND]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [SOS*UPDAPP]
CMT : Writing Hash CERT [SOS*ENO]
CMT : Writing Hash CERT [SOS*DSP0]
CMT : Writing Hash CERT [SOS*ISASW]
CMT : Writing Hash CERT [SOS+CORE]
CMT : Writing Hash CERT [SOS+ROFS1]
TIME : Write time : 00:00:36
MCU Write done
===Flashing [PPM]===
Erase : Processing RM-356_60.0.003_prd.rofs2.V12
Found 1 areas to erase
Erasing area 0x07180000 - 0x0915FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-356_60.0.003_prd.rofs2.V12
Total 87 [87/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS+ROFS2]
TIME : Write time : 00:00:06
PPM Write done
===Flashing [PPM2]===
Erase : Processing RM-356_60.0.003_C02_prd.rofs3.fpsx
Found 1 areas to erase
Erasing area 0x09160000 - 0x09E5FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-356_60.0.003_C02_prd.rofs3.fpsx
Total 11 [11/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS+ROFS3]
TIME : Write time : 00:00:00
PPM Write done
===Flashing [CNT]===
Erase : Processing RM-356_60.0.001_026_000_U01.uda.fpsx
Found 1 areas to erase
Erasing area 0x09E60000 - 0x0F71FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-356_60.0.001_026_000_U01.uda.fpsx
Total 29 [29/0/0] blocks to write, writing...
TIME : Write time : 00:00:04
CNT Write done
=================
ADL : End flashing
ADL : Finalize...

Flashing done!
Total flash time : 00:00:49
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 5800 XpressMusic
Software Info: V ICPR72_10w29_tube1 24-05-11 RM-356 (c) Nokia
IMEI: 353781047025562
Ape Version: V 60.0.003
Product code: 0582855
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
AfterFlash operations done ;D
Done!

Elapsed: 00:01:22
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

[phone expert]

hello infinity best team i phone expert requested for sl3 nokia x3-00 code and when i enter the code it was saying cannot undo restriction please do something about it now,don't let me loss customer please.....

thanks in advance....
phone expert...

[phone expert]

hello infinity best team i phone expert requested for sl3 nokia x3-00 code and when i enter the code it was saying cannot undo restriction please do something about it now,don't let me loss customer please.....

thanks in advance....
phone expert...

[madni shah]

COM6 [Serial2] selected
module v4.06
Device: _Autodetect MT6205-6239 NOR
Checking data, wait...
advanced flash detection enabled
Action: write flash
"smart write" active
write: Firmware
S200DJCRD1_PCB01_GPRS_MT6225_S00.S200DJCRD1_3EA0_V 1_0_0_2010-03-11__Crtel-C200_16m_En_Ru_Fr_Es_It_De_Id_Tr_Farsi_Pt_Ar.B0M.b in
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:0D03:0007
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 2088C4FFFF0043:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
otp offset: 00FE0000
detecting chip #01 in region #00...
flash: 2088C4FFFF0043:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
otp offset: 00FE0000
detecting chip #02 in region #00...
flash: 2088C4FFFF0043:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
otp offset: 00FE0000
detecting chip #03 in region #00...
flash: 2088C4FFFF0043:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
otp offset: 00FE0000
number of flash chip/regions detected: 04/01
Initialize Done
====> Set baud ...
230400
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: [standard] type (05)
TCL-ID is absent
rom info detection finished
rom info ver: 05
sw version: S200DJCRD1_PCB01_GPRS_MT6225_S00.S200DJCRD1_3EA0_V 1_0_0.BIN
project-id: S200DJCRD1_3EA0_V1_0_0, 00000000
code offset: 00000000
ffs offset/size [01]: 00E00000/00200000
rom info structure: [standard] type (05)
TCL-ID is absent
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
Backup required data Done
====> Patch required data ...
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
sec info (fast) detection...
searching sec info#1...
.
search sec info#1 finished
usb bootloader (file) is absent
startup code area #1 check...
done
detecting startup code area #2...
startup code area #2 is absent
Area: Firmware
flash: 2088C4FFFF0043:2088C400000000
Write: Firmware
usb bootloader (file) is absent
sec info (fast) detection...
searching sec info#1...
.
search sec info#1 finished
Write Done
====> Finalization ...
Finalization Done
Finished, time used: 52 sec
Remove/Install battery now !

[datalife2000]

Originally Posted by phone expert

hello infinity best team i phone expert requested for sl3 nokia x3-00 code and when i enter the code it was saying cannot undo restriction please do something about it now,don't let me loss customer please.....

thanks in advance....
phone expert...

use cable to enter code

[jr astigin]

Acatel OT-209 unlock done

COM14 [Serial2] selected
module v4.07
Device: Alcatel-209X
Checking data, wait...
advanced flash detection enabled
Action: rebuild security area
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A08]...
CPU: MT6223
high speed boot On
chip: 0011:55A5:A00C
status: 01
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 8C22F60000000D:2BEA0000000000
flash: AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
otp offset: 003F0000
number of flash chip/regions detected: 01/01
Initialize Done
====> Set baud ...
921600
Set baud Done
====> Initialize bootcode ...
interesting cpu type found
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: [standard] type (05)
TCL-ID is present
rom info detection finished
TCL-ID detection...
TCL-ID detection done
rom info ver: 05
sw version: JRD23_NEP_08A_PCB01_GSM_MT6223_S00.MAUI_08A_W08_36 _SP1_V28_F1.BIN
project-id: MAUI.08A.W08.36.SP1.V28.F1, 00000000
code offset: 00000000
ffs offset/size [01]: 003A0000/00058000
TCL-ID identification
version: 76T
provider: 209X-2ADCPC1
customization: CM76PAB0
customization: XM76PAB0
TCL-ID identification done
rom info structure: [standard] type (05)
TCL-ID is present
ffs/eeprom address assigned: 003A0000
sec info (detailed) detection...
searching sec info#1...
search sec info#1 finished
sim-lock status: enabled
product id: JRD_COMMUNICATION_U91X_PRODUCTS
area1 is valid
area2 is valid
area3 is valid
area4 is valid
searching sec info#2...
.
search sec info#2 finished
security area (sec info, cust) calculation...
identification header detected
customization: XM76PAB0
customization name adjusted
flash: 8C22F60000000D:2BEA0000000000
flash: 8C22F60000000D:2BEA0000000000
Write: security area (sec info, cust)
security area (sec info, cust) calculation done
security area (sec info, hash) calculation...
..................security area (sec info, hash) detecting size...
security area (sec info, hash) detecting parameters...
security area (sec info, hash) encoding...
done
flash: 8C22F60000000D:2BEA0000000000
flash: 8C22F60000000D:2BEA0000000000
Write: security area (sec info, hash)
security area (sec info, hash) calculation done
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
original imei: FFFFFFFFFFFFFF
flash: 8C22F60000000D:2BEA0000000000
Backup required data Done
====> Patch required data ...
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
Write Done
====> Finalization ...
ffs formatting...
flash: 8C22F60000000D:2BEA0000000000
Finalization Done
file saved: c:\InfinityBox\MModule\backup_security\Alcatel-209X_JRD23_NEP_08A_PCB01_GSM_MT6223_S00.MAUI_08A_W 08_36_SP1_V28_F1__system_log__00000000_20111121-185343.B0X.bin
Finished, time used: 1 min 9 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

[joni_rajpura]

card found: S/N xxxxxxxxxx
registered to: xxxxxxxxxx

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia X3-02
Software ver : V 06.05 30-05-11 RM-639 (c) Nokia
IMEI : 357912040345683
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : 92_MP2.3_6.04
APE Test:
PPM : V 06.05 30-05-11 RM-639 (c) Nokia MR1
CNT :
Product SN : C9E406595
Product code : 0598209
Base Prd.code: 0593642
Module code : 0204600
Long Prod.SN : 0
Hardware info=======
HWID : 1004
Retu : 51
Tahvo : 00
Batery: 4014 mV
Camera:
CMT BT: 4217-v610
APE BT:
APE HW:
LCDVer: TPO
RF ic :
Lock info ===========
IMEI : 357912040345683
IMEI spNet : 3A 75 19 02 04 43 65 08
IMEI svNet : 33 75 19 02 04 43 65 38 F7

Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created

User Code : 12345
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

Core version : 1.30 Rev : 1.1

Selected FlashSettings :
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm639__06.05.mcusw
PPM : rm639__06.05.ppm_c
CNT : rm639__06.05_006.image_c_ctv_de_9d8l9
Flashing phone now...
Check files done...
-> SWversion check skipped : Manual mode selected
Backup CRT308 data...
CRT308 Backup Created
SLx Simlock Data read ... ok
SL3 Simlock Sign read ... ok
WMDRM read ... ok
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Gathering phone info...
Check communication with phone...
Reboot....
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: 0850010A00EC5840C6C1F644B9474ED79C02B21F
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.34.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.34.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 23B57C26A0C7A9C34544727AA1D2FC8F3265329C
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 357912040345683
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\357912040345683.rp l

===Flashing [MCU]===
Erase : Processing rm639__06.05.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm639__06.05.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 264 blocks
TIME : Write time : 00:00:05
MCU Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

===Flashing [PPM]===
Erase : Processing rm639__06.05.ppm_c
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm639__06.05.ppm_c
Total writen 63 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

===Flashing [CNT]===
Erase : Processing rm639__06.05_006.image_c_ctv_de_9d8l9
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm639__06.05_006.image_c_ctv_de_9d8l9
Total writen 268 blocks
TIME : Write time : 00:00:06
CNT Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:14
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia X3-02
Software Info: V 06.05 30-05-11 RM-639 (c) Nokia
IMEI: 357912040345683
PPM version : V 06.05 30-05-11 RM-639 (c) Nokia C
Product code: 0598209
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
Error When resetting FullFactory ...
Error When resetting Product Tune ...
Error When resetting SW upgrade Default ...
Resetting LifeTimer
Error check LifeTimer Data, break
Probably - will not exist, before phone start :|
Set phone to Normal mode...

AfterFlash operations done ;D

[joni_rajpura]

card found: S/N xxxxxxxxxxx
registered to: xxxxxxxxxxx

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - C2-03
Software ver : V 06.96 09-09-11 RM-702 (c) Nokia
IMEI : 359064048326428
Ape Ver :
APE Var :
APE ADSP:
DSP Ver :
APE Test:
PPM : V 06.96 09-09-11 RM-702 (c) Nokia MH1
CNT : Content: ctv IN V 06.96 09-09-11 RM-702 (c) Nokia
Product SN : CFB1EC2AI
Product code : 059K4Z2
Base Prd.code: 059C0J7
Module code : 0204579
Long Prod.SN : 0
Hardware info=======
HWID : 2000
Retu :
Tahvo :
Batery: 3711 mV
Camera:
CMT BT: 19b5-22012
APE BT:
APE HW:
LCDVer: TPO
RF ic :
Lock info ===========
IMEI : 359064048326428
IMEI spNet : 3A 95 60 04 84 23 46 02
IMEI svNet : 33 95 60 04 84 23 46 02 F5

Sl Conf : 001-01-00000000000
Sl Prof : 800000000003000-B
Sl Aux : 000B0000
Hw Sig : 5504E13E34ECF455
Provider : Default Test Operator

Lock info:
Block 1
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 2
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 3
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 4
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 5
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 6
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 7
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;

CRT308 Backup Created

User Code : 12345
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

BackUp UserData : [PhoneBook]
Generation mode : [S40]
Cnt Server Info : 515/485/1000
New generation SG213 detected
Using search engine...
Data proceed ok...
csv file save to C:\Documents and Settings\SAI\Desktop\RM-702 C2-03_359064048326428.csv
515 phonebook records are found!
VCF Records saved to : BEST\Phones_Data\IMEI\
File saved to : C:\Documents and Settings\SAI\Desktop\RM-702 C2-03_359064048326428.S4pb
Read done
Done...

Core version : 1.30 Rev : 1.1

Selected FlashSettings :
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm702__06.96.mcusw
PPM : rm702__06.96.ppm_mh1
CNT : rm702__06.96_003.image_mh1_ctv_in_9k4z2
Flashing phone now...
Check files done...
-> SWversion check skipped : Manual mode selected
Backup CRT308 data...
CRT308 Backup Created
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Check communication with phone...
Batery voltage : 3711 mV
-> Batery voltage less, than 3,8V (3711mV). Continue at user risk
Reboot....
Connection opened successfully
DBG : F00A1FB300020303010100FF
CPUID : SGOLD 213
2nd boot Ok, 01
2nd ready, AA
Sending Algo
Algo sent Ok
BL : Quantum_Bootloader_10.46_M1S1
Speed accepted, use 6.500.000
FLASHID : EC001230
FLIC conf set, RST set
Boot done!

===Flashing [MCU]===
File : rm702__06.96.mcusw
Image : rm702__06.96.mcusw_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:02
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01B40000
Erasing, wait ...
Erase done, time : 00:00:55
Write , Start : 0x40280000 , Len : 0x01AC0000
Flashing , wait ...
Region flash done, time : 00:00:39
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ...
Erase done, time : 00:00:00
No write data, skip

===Flashing [PPM]===
File : rm702__06.96.ppm_mh1
Image : package_mh1.ppm_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41DC0000 , Len : 0x00700000
Erasing, wait ...
Erase done, time : 00:00:10
Write , Start : 0x41DC0000 , Len : 0x004D1058
Flashing , wait ...
Region flash done, time : 00:00:05

===Flashing [CNT]===
File : rm702__06.96_003.image_mh1_ctv_in_9k4z2
Image : package_mh1_ctv_in.image.fls
Cert block found, sending....
Cert sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x424C0000 , Len : 0x01960000
Erasing, wait ...
Erase done, time : 00:00:55
Write , Start : 0x424C0000 , Len : 0x00DC0000
Flashing , wait ...
Region flash done, time : 00:00:17
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ...
Erase done, time : 00:00:02
No write data, skip

Flashing done!
Total flash time : 00:03:12
Reboot phone now...

Reading Phone Info....
Connected phone - C2-03
Software Info: V 06.96 09-09-11 RM-702 (c) Nokia
IMEI: 359064048326428
PPM version : V 06.96 09-09-11 RM-702 (c) Nokia MH1
Product code: 059K4Z2
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Resetting LifeTimer
Reset Done!
Checking User Certificates...
Total - 42 certs
Data exist, skip certificate repair...
Set phone to Normal mode...

AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:04:19
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - C2-03
Software ver : V 06.96 09-09-11 RM-702 (c) Nokia
IMEI : 359064048326428
Ape Ver :
APE Var :
APE ADSP:
DSP Ver :
APE Test:
PPM : V 06.96 09-09-11 RM-702 (c) Nokia MH1
CNT : Content: ctv IN V 06.96 09-09-11 RM-702 (c) Nokia
Product SN : CFB1EC2AI
Product code : 059K4Z2
Base Prd.code: 059C0J7
Module code : 0204579
Long Prod.SN : 0
Hardware info=======
HWID : 2000
Retu :
Tahvo :
Batery: 3691 mV
Camera:
CMT BT: 19b5-22012
APE BT:
APE HW:
LCDVer: TPO
RF ic :
Lock info ===========
IMEI : 359064048326428
IMEI spNet : 3A 95 60 04 84 23 46 02
IMEI svNet : 33 95 60 04 84 23 46 02 F5

Sl Conf : 001-01-00000000000
Sl Prof : 800000000003000-B
Sl Aux : 000B0000
Hw Sig : 5504E13E34ECF455
Provider : Default Test Operator

Lock info:
Block 1
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 2
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 3
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 4
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 5
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 6
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 7
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;

CRT308 Backup Created

User Code : 12345
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

Restoring UserData : [PhoneBook]
Generation mode : [S40]
S40 New Generation Detected
Cnt Server Info : 0/1000/1000
Writing Phonebook...
515 phonebook records write ok!
Done...

Phone already in Normal mode
Done!