Too much data! Break! Send report to support? - GSM-Forum

Shani3 · 11-04-2015, 10:42

Operation : Remove Viruses [SmartAV] [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A2058494E594816A1CBF5DD100D
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A1CBF5DD100D
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

SmartAV Init Ok!
Scanning FileSystem now , please wait
Scan Done, infected files found : 249
AVVerify : Too much data! Break! Send report to support

Error! Check previous message for more info!
Check battery, cable, charge! Before try again, check result!

Operation Failed
Elapsed: 00:00:47
Reconnect Power/Cable!

pradeep_kus · 11-04-2015, 10:44

Quote:

Originally Posted by Shani3

Operation : Remove Viruses [SmartAV] [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A2058494E594816A1CBF5DD100D
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A1CBF5DD100D
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

SmartAV Init Ok!
Scanning FileSystem now , please wait
Scan Done, infected files found : 249
AVVerify : Too much data! Break! Send report to support

Error! Check previous message for more info!
Check battery, cable, charge! Before try again, check result!

Operation Failed
Elapsed: 00:00:47
Reconnect Power/Cable!

Hello,

read FW.
Pack it with 7zip with ultra compression.
Fw size will be near 400-500 mb. Upload it and give me link in PM.Mr Or M.r Jaydi

jawed_ali · 11-04-2015, 10:57

InfinityBox CM2MTK Chinese Miracle II [MTK module] v 1.35 many time setup carsh or say rang chek eror plz fix

JayDi · 11-04-2015, 11:22

Quote:

Originally Posted by jawed_ali

InfinityBox CM2MTK Chinese Miracle II [MTK module] v 1.35 many time setup carsh or say rang chek eror plz fix

Fix reader and card connect first.

randolfotecnico · 04-23-2016, 19:03

I have the same problem, in my case is because an app sex hot, video hot, etc. but I can clean it.

JayDi · 04-23-2016, 19:37

Use latest CM2MTK version for start.

11-04-2015, 10:42	#1 (permalink)
Shani3 No Life Poster Join Date: May 2011 Location: KPK Mardan Age: 36 Posts: 2,642 Member: 1582572 Status: Offline Sonork: 100.1609641 Thanks Meter: 573	Too much data! Break! Send report to support? Operation : Remove Viruses [SmartAV] [ v1.35 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 5 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6572 BB_CPU_HW : CA01 BB_CPU_SW : 8A00 BB_CPU_SB : 0000 BB_CPU_NM : [MediaTek] MT6572_S00 Processing BROM stage BLVersion : 0x01 SecCfgVal : 0x00000000 BromVersion : 0xFF BLVersion : 0x01 Preloader Status : Alive Processing DA stage DA Select done , sending DA Ver : MTK_AllInOne_DA_v7.1533.03 NAND_ID : 00000000000000000000000000000000 eMMC_ID : 90014A2058494E594816A1CBF5DD100D DA Stat : v4.2 on BBID : 0x88 DA Sent. Configure setting now ... DA started successuflly eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0090 , OEM : 014A [eMMC] : FLASH_INF : HYNIX [eMMC] : FLASH_CID : 90014A2058494E594816A1CBF5DD100D [eMMC] : FLASH_EXT : 00200000/00200000 [eMMC] : FLASH_LEN : 0x00000000E7000000 INT RAM : 0x00020000 EXT RAM : 0x20000000 BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! SmartAV Init Ok! Scanning FileSystem now , please wait Scan Done, infected files found : 249 AVVerify : Too much data! Break! Send report to support Error! Check previous message for more info! Check battery, cable, charge! Before try again, check result! Operation Failed Elapsed: 00:00:47 Reconnect Power/Cable!

11-04-2015, 10:57	#3 (permalink)
jawed_ali Freak Poster Join Date: Mar 2008 Location: ANDROID HEART Posts: 396 Member: 724704 Status: Offline Sonork: 100.1605390 Thanks Meter: 92	InfinityBox CM2MTK Chinese Miracle II [MTK module] v 1.35 many time setup carsh or say rang chek eror plz fix

04-23-2016, 19:03	#5 (permalink)
randolfotecnico Junior Member Join Date: Dec 2007 Posts: 37 Member: 642083 Status: Offline Thanks Meter: 4	I have the same problem, in my case is because an app sex hot, video hot, etc. but I can clean it.

04-23-2016, 19:37	#6 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Use latest CM2MTK version for start.