GSM-Forum - unable to read Sc9830 flashfile

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)

- - unable to read Sc9830 flashfile (https://forum.gsmhosting.com/vbb/f296/unable-read-sc9830-flashfile-2259041/)

unable to read Sc9830 flashfile

Handset LYF Flame 7 LS4006

Code:

Operation : Read FullFlash [ v1.27 ]
 

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 

3. Insert cable
 

 ====  Wait for phone...
 

Phone found! [ 4 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC9830 eMMC Generic Loader v2 Inf

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!
 

FlashMode Set : Ok!

Detected eMMC Flash , Structure detect Ok!
 

[FW_READER] : Prepare Ok!

- > Wait phone connected ... 
 

Phone found! [ 4 ]

Port Opened

Sync...

Initial Boot Failed!

Boot not done, reason : Wrong BootKeys

Hint : Reset power and use ANOTHER BootKey ( VOL up or VOL down )

[FW_READER] : Step #2 Failed!

Error_Info : Initial Boot not done! Check Driver and connection, charge battery!
 

Reconnect Power/Cable!

Hello,
Read instructions Carefully u have not press Boot key dont remove cable just press boot key and press ok

Quote:

Originally Posted by princesaddam (Post 12662330)

Hello,
Read instructions Carefully u have not press Boot key dont remove cable just press boot key and press ok

bro already tried several times same result, already read another model it is successful

Code:

Operation : Read FullFlash [ v1.27 ]
 

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 

3. Insert cable
 

 ====  Wait for phone...
 

Phone found! [ 4 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC9830 eMMC Generic Loader v2 Inf

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!
 

FlashMode Set : Ok!

Detected eMMC Flash , Structure detect Ok!
 

[FW_READER] : Prepare Ok!

- > Wait phone connected ... 
 

Phone found! [ 4 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC9830 eMMC Generic Loader v2 Inf

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!
 

- > Wait phone connected ... 
 

Phone found! [ 4 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC9830 eMMC Generic Loader v2 Inf

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!
 

Model Name  : LS-4005

Model Brand : LYF

Model Device: LS-4005

AndrVersion : 5.1

BaseBand CPU: LS-4005

Project Ver : LYF_LS-4005_06_17

Model Ext   : LS-4005
 

[Read Mode] : HSUSB : 0x3000
 

[FW_READER] : Reading Firmware Now ... 
 

[Read Ok] : u-boot-spl-16k.bin

[Read Ok] : u-boot.bin

[Read Ok] : prodnv.img

[Read Ok] : nvitem_l.bin

[Read Ok] : sharkl_cp1.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : l__WPH_arm7.bin

[Read Ok] : PM_arm7_sys.bin

[Read Ok] : logo_480x800.bin

[Read Ok] : fblogo_480x800.bin

[Read Ok] : wcn_fdl.bin

[Read Ok] : AA_MARLIN.bin

[Read Ok] : boot.img

[Read Ok] : system.img

[Build Ok] : cache.img

[Read Ok] : recovery.img

[Build Ok] : userdata.img
 

AndroidInfo created

Hello @avtarkaint,
Try with different boot key combination.
Anyway, just keep pressing the boot key while the software prompts to reconnect. Then press Ok.