Utstarcom 779 Hi, what are the cable for Starcom 779 ???, i search in IPmart and cant find any, what model fits?? are new china model compatible??? Thanks. |
Dear Friend, I suggest you to check this "sticky" thread: http:///vbb/showthread.php?t=398297 After you will check it you will be able to start reallt great software with name "Infinity-Box Shell" (that is not only software but also is greatest pinout/information database), select model UTStarcom-779 and see there pinout and list of compatible cables. Yes, yes, I know that everybody around so busy, so product supporter (who always has a lot of time for talks instead of programming) can make it for you. Here is information that product supporter got from great software with name "Infinity-Box Shell" especially for you: Cable name: Lobster-575 keyboard top pinout information deleted in here Similar cables: Aiko 52G Gradiente GC300 Gradiente GF760 UTstarcom GPRS758 UTstarcom GPRS778 UTstarcom GPRS779 UTstarcom GSM708 UTstarcom GSM718 Virgin_Lobster Lobster-575 Voxtel 3iD Voxtel RX11 Voxtel V350 Voxtel V500 Greetings from lazy product supporter who always has a lot of free time ! |
779 Chip error Hey did you get any you cant unlock? |
Hello, We are remember about some problems with some 779, we are working about it. |
i got same problem as a lot of people i see in forum, when are you going to release solution, here is log COM8 [VCP0] selected Device: UTstarcom GPRS779 Checking data, wait... Action: unlock Boot... Phone should be Switched OFF ! Press Power button now ! boot version: 00020602 connecting... Boot Done Check Connection... Check Connection Done Set Baud... Set Baud Done Check Flash... Check Flash Done Check Parameters... Check Parameters Done Check Space... error: unknown flash chip: 048A:EA00:3FFD:EA00 error: unknown flash chip: B510:48EF:2280:5014 error: unknown flash chip: 6646:2373:FFFF:FFFF Check Space Fail Finished, time used: 13 sec Remove/Install battery now ! |
UTStarcom 779 Unlock Good luck unlocking them. I have been waiting since November of 2007. This box will not unlock any of the new versions. I bought 5 boxes, was only able to do the old models. There are more newer models than old versions. You will be 1000% screwed until they make a solution for this phone. I see that there are more people in many forums with the same situation . |
http://www.infinity-box.biz/download...dule_v1.10.rar 1. run software 2. go to "Settings" page 3. make "Complete models list" box checked 4. try to read flash and make unlock for your UTStarcom |
waiting for your results: [email protected] |
not unlock please unlock COM5 [VCP0] selected Device: UTstarcom GPRS779 "advanced chip detection" active Action: unlock Checking data, wait... Boot... Phone should be Switched OFF ! Press Power button now ! boot version: 00020602 connecting... Boot fail Finished, time used: 19 sec Remove/Install battery now ! ……………………………………….. COM5 [VCP0] selected Device: UTstarcom GPRS779 "advanced chip detection" active Action: read flash Checking data, wait... Boot... Phone should be Switched OFF ! Press Power button now ! boot version: 00020602 connecting... Boot fail Finished, time used: 19 sec Remove/Install battery now ! |
hello! i reuploaded one more version , download it from same link. test it and report |
COM5 [VCP0] selected Device: UTstarcom GPRS779 Checking data, wait... Action: unlock Boot... Phone should be Switched OFF ! Press Power button now ! boot version: 00020602 connecting... Boot Done Check Connection... Check Connection Done Set Baud... Set Baud Done Check Flash... Check Flash Done Check Parameters... Check Parameters Done Check Space... Flash: 0001:227E22212200 flash: Amd S29PL129J,S71PL129JC0,S71PL129JB0,S71PL129JA0 T 8Mb Check Space Done Check Data... error: rx block checksum mismatch error: rx block checksum mismatch error: rx block checksum mismatch error: rx block checksum mismatch error: rx block checksum mismatch error: rx block checksum mismatch error: rx block checksum mismatch error: rx block checksum mismatch error: rx block checksum mismatch error: rx block checksum mismatch error: rx block checksum mismatch error: rx block checksum mismatch error: rx block checksum mismatch error: rx block checksum mismatch error: rx block checksum mismatch error: rx block checksum mismatch error: rx block checksum mismatch error: rx block checksum mismatch error: rx block checksum mismatch error: rx block checksum mismatch error: rx block checksum mismatch error: rx block checksum mismatch error: unexpected rx block size: 001FD1/002000 error: unexpected rx block size: 0012D6/002000 it is modulo 1.10 COM5 [VCP0] selected Device: UTstarcom GPRS779 "advanced chip detection" active Action: unlock Checking data, wait... Boot... Phone should be Switched OFF ! Press Power button now ! boot version: 00020602 connecting... Boot fail Finished, time used: 19 sec Remove/Install battery now ! COM5 [VCP0] selected Device: UTstarcom GPRS779 "advanced chip detection" active Action: unlock Checking data, wait... Boot... Phone should be Switched OFF ! Press Power button now ! boot version: 00020602 connecting... Boot fail Finished, time used: 20 sec Remove/Install battery now ! |
@cmagavilano Are you sure that you have downloaded and installed latest HModule (that was just uploaded again at the same link) ? |
1 Attachment(s) it is paint pant COM5 [VCP0] selected Device: UTstarcom GPRS779 "advanced chip detection" active Action: unlock Checking data, wait... Boot... Phone should be Switched OFF ! Press Power button now ! boot version: 00020602 connecting... Boot fail Finished, time used: 21 sec Remove/Install battery now ! |
@cmagavilano Are you sure that you have downloaded and installed latest HModule (that was just uploaded again at the same link) ? Please, download software again and try it: http://www.infinity-box.biz/download...dule_v1.10.rar |
Problem Solved :):) Thanks Infinity Team:):) |
@WorldCell Please, tell me little bit more about results. Thank you ! |
Your #1 Infinity #1, Problem is resolved!!;) |
@gsm1999 Please, let me know more information, I want to be sure that everything is Ok. |
Here you go COM3 [VCP0] selected Device: UTstarcom GPRS779 "advanced chip detection" active Action: unlock Checking data, wait... Boot... Phone should be Switched OFF ! Press Power button now ! boot version: 00020602 connecting... Boot done Check connection... Check connection done Set baud... Set baud done Check hardware... flash: 01227E223C2200:8AEA0000000000 flash: Amd AMD/Fujitsu std [D 0004x010000 007Ex040000 0004x010000] 32Mb Check hardware done Read data... reading UTstarcom GPRS779_eeprom_calibration-1... file saved: C:\Program Files\InfinityBox\HModule\backup_UTstarcom GPRS779_eeprom_calibration-1_20080324-101403.92E.bin reading UTstarcom GPRS779_eeprom_calibration-2... file saved: C:\Program Files\InfinityBox\HModule\backup_UTstarcom GPRS779_eeprom_calibration-2_20080324-101946.92E.bin Read data done Check data... file saved: C:\Program Files\InfinityBox\HModule\backup_eeprom_20080324-102533.92E.bin please, wait... pass-1... pass-2... Check data done Writing... flash: 01227E223C2200:46237300000000 Write: eeprom Writing done Finished, time used: 739 sec Remove/Install battery now ! |
Hello, Thanks a lot for good test report ! Hope it will be no problems with UTStarcom 779 in future :) |
not unlock @InfinitySupport as you have made it to my it doesn't leave me thank you COM5 [VCP0] selected Device: UTstarcom GPRS779 "advanced chip detection" active Action: unlock Checking data, wait... Boot... Phone should be Switched OFF ! Press Power button now ! boot version: 00020602 connecting... Boot done Check connection... Check connection done Set baud... Set baud done Check hardware... flash: 01227E22212200:8AEA0000000000 flash: Amd AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb Check hardware done Read data... reading UTstarcom GPRS779_eeprom_calibration-1... warning: wrong data size at 0x01FFE400, retry... read error recovered file saved: C:\Archivos de programa\InfinityBox\HModule\backup_UTstarcom GPRS779_eeprom_calibration-1_20080324-153640.92E.bin reading UTstarcom GPRS779_eeprom_calibration-2... warning: wrong data size at 0x01812400, retry... read error recovered warning: wrong data size at 0x01813C00, retry... read error recovered warning: wrong data size at 0x01814800, retry... read error recovered warning: wrong data size at 0x01817800, retry... read error recovered warning: wrong data size at 0x01818800, retry... read error recovered warning: wrong data size at 0x01819000, retry... read error recovered warning: wrong data size at 0x01819400, retry... read error recovered warning: wrong data size at 0x0181E800, retry... read error recovered error: unexpected data: 8182 warning: wrong data size at 0x01821000, retry... read error recovered warning: wrong data size at 0x01825800, retry... warning: wrong data size at 0x01825800, retry... read error recovered warning: wrong data size at 0x01827400, retry... read error recovered warning: wrong data size at 0x0182A000, retry... read error recovered warning: wrong data size at 0x0182B000, retry... read error recovered warning: wrong data size at 0x0182E800, retry... warning: wrong data size at 0x018AD000, retry... file saved: C:\Archivos de programa\InfinityBox\HModule\backup_UTstarcom GPRS779_eeprom_calibration-2_20080324-154122.92E.bin Finished, time used: 308 sec Remove/Install battery now ! |
2 Attachment(s) fplease for unlock utstarcom779 |
Try again make sure cable and battery are good.. same problem i get sometimes just retry it |
not you that but to make for com1 the same error helps COM5 [VCP0] selected Device: UTstarcom GPRS779 "advanced chip detection" active Action: unlock Checking data, wait... Boot... Phone should be Switched OFF ! Press Power button now ! boot version: 00020602 connecting... Boot done Check connection... Check connection done Set baud... Set baud done Check hardware... flash: 01227E22212200:8AEA0000000000 flash: Amd AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb Check hardware done Read data... reading UTstarcom GPRS779_eeprom_calibration-1... warning: wrong data size at 0x01FFC800, retry... read error recovered file saved: C:\Archivos de programa\InfinityBox\HModule\backup_UTstarcom GPRS779_eeprom_calibration-1_20080324-213536.92E.bin reading UTstarcom GPRS779_eeprom_calibration-2... warning: wrong data size at 0x01810800, retry... read error recovered warning: wrong data size at 0x01812000, retry... warning: wrong data size at 0x01812000, retry... warning: wrong data size at 0x01812000, retry... warning: wrong data size at 0x01812000, retry... warning: wrong data size at 0x01812000, retry... warning: wrong data size at 0x01812000, retry... warning: wrong data size at 0x01812000, retry... warning: wrong data size at 0x01812000, retry... warning: wrong data size at 0x01812000, retry... error: too many retries during read operation Probably errors exist during flash read operation. Do you want to repeat read operation ? warning: wrong data size at 0x01812C00, retry... read error recovered warning: wrong cs at 0x01815400, retry... read error recovered warning: wrong data size at 0x01817400, retry... warning: wrong data size at 0x01817400, retry... warning: wrong data size at 0x01817400, retry... warning: wrong data size at 0x01817400, retry... warning: wrong data size at 0x01817400, retry... warning: wrong data size at 0x01817400, retry... warning: wrong data size at 0x01817400, retry... warning: wrong data size at 0x01817400, retry... read error recovered warning: wrong data size at 0x01818000, retry... warning: wrong data size at 0x01818000, retry... warning: wrong data size at 0x01818000, retry... warning: wrong data size at 0x01818000, retry... warning: wrong data size at 0x01818000, retry... warning: wrong data size at 0x01818000, retry... warning: wrong data size at 0x01818000, retry... warning: wrong data size at 0x01818000, retry... warning: wrong data size at 0x01818000, retry... error: too many retries during read operation Probably errors exist during flash read operation. Do you want to repeat read operation ? operation canceled by user file saved: C:\Archivos de programa\InfinityBox\HModule\backup_UTstarcom GPRS779_eeprom_calibration-2_20080324-213712.92E.bin Read data fail Finished, time used: 119 sec Remove/Install battery now ! |
yupia ok very very good only changer ixxi COM1 [Serial0] selected Device: UTstarcom GPRS779 "advanced chip detection" active Action: unlock Checking data, wait... Boot... Phone should be Switched OFF ! Press Power button now ! boot version: 00020602 connecting... Boot done Check connection... Check connection done Set baud... Set baud done Check hardware... flash: 01227E22212200:8AEA0000000000 flash: Amd AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb Check hardware done Read data... reading UTstarcom GPRS779_eeprom_calibration-1... file saved: C:\Archivos de programa\InfinityBox\HModule\backup_UTstarcom GPRS779_eeprom_calibration-1_20080324-220320.92E.bin reading UTstarcom GPRS779_eeprom_calibration-2... file saved: C:\Archivos de programa\InfinityBox\HModule\backup_UTstarcom GPRS779_eeprom_calibration-2_20080324-221537.92E.bin Read data done Check data... file saved: C:\Archivos de programa\InfinityBox\HModule\backup_eeprom_2008032 4-222756.92E.bin please, wait... pass-1... pass-2... Check data done Writing... flash: 01227E22022201:FFFFFF00000000 Write: eeprom Writing done Finished, time used: 1520 sec Remove/Install battery now ! |
Hello, does lobster 575 is same connector as LG VX6000 cable? Can I use LG Cable to build a lobster 575 cable? thanks in advance... |
I ned flash file for Voxtel V500! Please helpme |
Quote:
|
still the same problem COM1 [VCP2] selected Device: UTstarcom-GPRS779 Action: unlock Checking data, wait... Boot... Phone should be Switched OFF ! Press Power button now ! boot version: 00020602 connecting... Boot fail Finished, time used: 30 sec Remove/Install battery now ! |
Hello, Try to use another pinout: keyboard top 1.........24 13: Box Rx/Phone Tx (RJ45 pin-3) 14: Box Tx/Phone Rx (RJ45 pin-2) 24: Gnd 17: Box Rx/Phone Tx (RJ45 pin-3) 18: Box Tx/Phone Rx (RJ45 pin-2) 24: Gnd |
about the repair imei ?? |
Hello, You can try to use repair_eeprom files for imei repair. Also we will think about direct imei repair function for this model. |
Gprs779 Thanks sofar to Infinity Support, Pinout posted works (1st one) Now a new problem. After doing unlock on a GPRS779 model form Claro Dominican Republic phone don't startup complete only starts with Claro logo and turns off again. Tried flashing with the only 779 flash in support result is a dead phone. Also tried flashing with ffs and eprom repair all available versions in support phone still dead. Please help |
Hello, It may be problem with hardware <-> software compatibility. We will try to upload more flash files for this model ASAP. Also, did you tried to power-on phone after unlock without sim card and make 112/emergency call ? |
After unlock phone will not startup, only logo and reboot |
|
Requested files sent, I hope you offer a solution 2 dead phones here |
Hello, one more firmware file was uploaded in support area. Try to flash phone with new file. Let's see results. |
Hi, Tried to flash with this new firmaware but phone still dead |
we have 10 pieces gprs779 dead too plz upload new versions |
Quote:
Did you tried to flash your phone with all firmware from support area ? Please, do it now. |
hello please help as I can remove security code of UTStarcom 779 but it manually. thanks |
Quote:
|
Quote:
|
Quote:
Please, let me know how you was able to check flash chip size and what is the problems with boot ? |
because boot ok with other box and show that information, ill upload later the log detect but say failed . |
Hello, What is the problem exactly with boot procedure and Infinity-Box software ? Are you sure that you have used correct cable ? Even if your cable may works with other tool I suggest you to check Infinity-Box Shell to see correct pinout for this model. |
successful unlock gprs778 cti argentina COM1 [VCP0] selected Device: UTstarcom-GPRS778 Action: unlock Checking data, wait... Boot... Phone should be Switched OFF ! Press Power button now ! boot version: 00020602 connecting... Boot done Check connection... Check connection done Set baud... 812500 Set baud done Check hardware... flash: 01227E22212200:8AEA0000000000 flash: Amd S29PL129J,S71PL129JC0,S71PL129JB0,S71PL129JA0 T 8Mb Check hardware done Read data... reading UTstarcom-GPRS778_eeprom_calibration-1... file saved: C:\Archivos de programa\InfinityBox\HModule\UTstarcom-GPRS778_eeprom_calibration-1_20090219-221611.92E.bin reading UTstarcom-GPRS778_eeprom_calibration-2... file saved: C:\Archivos de programa\InfinityBox\HModule\UTstarcom-GPRS778_eeprom_calibration-2_20090219-221838.92E.bin Read data done Check data... file saved: C:\Archivos de programa\InfinityBox\HModule\eeprom_20090219-222107.92E.bin please, wait... pass-1... pass-2... pass-3... Check data done Writing... flash: 01227E22022201:FFFFFF00000000 Write: eeprom Writing done Finished, time used: 378 sec Remove/Install battery now ! used 1st pinout.with the second pinout i got an error connecting.but with the first pinout it worked like a charm BR Gee4234 |
All times are GMT +1. The time now is 09:06. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -