GSM-Forum - w995 siroko error connection

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)

- - w995 siroko error connection (https://forum.gsmhosting.com/vbb/f296/w995-siroko-error-connection-1102171/)

w995 siroko error connection

w995 siroko connection erro r error: boot phase#1 failed
Need solution Infinity Team

Code:

COM3 [VCP0] selected

module  v3.07

Device: Autodetect 6205-6227 NOR

Checking data, wait...

advanced flash detection enabled

Action: reset settings ("format ffs")

ffs/eeprom backup enabled, it may takes several minutes !

====>  Boot ...

Press and HOLD Power button now !
 baud autodetection active

9600 autodetect

Connecting, wait...
 error: boot phase#1 failed

Release Power button now !
 in case of initial connection problem: on/off "Boot baudrate autoselect"

Boot Fail

Finished, time used: 2 sec

Remove/Install battery now !

Quote:

COM3 [VCP0] selected
module v3.22
Action: reset settings ("format ffs")
Model: Autodetect 6205-6239 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
9600 autodetect
error: boot phase #2/1 failed
Can not initialize test mode, possible reasons:
1. communication fault, repeat required operation
2. ffs/eeprom is seriously damaged, use repair ffs/eeprom files or use another unlock/format method
error: operation failed !
Finished, time used: 8 sec
Remove/Install battery now !

Hi,
What is this phone CPU chip name ?

Quote:

Originally Posted by infinitysupport (Post 6370378)

hi,
what is this phone cpu chip name ?

cpu: 6223da:0946:aoal

hello!

this log idicates wrong pinout.
you must find correct pinout

Quote:

Originally Posted by InfinityHelp (Post 6371607)

hello!

this log idicates wrong pinout.
you must find correct pinout

are u sure !!!!!???? ( i try and post result )

hello!

yes, 100% wrong pinout error

Quote:

Originally Posted by InfinityHelp (Post 6375789)

hello!

yes, 100% wrong pinout error

BUt this pinout work for many phone with me
http://forum.gsmhosting.com/vbb/atta...3&d=1280478438

hello!

can you check with multimeter if o those pins is presented 2,7-2,9 volts