what is problem this i am 3 times try but same - GSM-Forum

somonahmed · 11-10-2016, 11:05

Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : V49
Model Brand : symphony
Model Device: V49
AndrVersion : 5.1
BaseBand CPU: V49
Project Ver : V49_HW2_V9
Model Ext : V49

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
ReadErr : MajorErr , 0x3000:0x0000:0x00000000
ReadErr : MajorErr , 0x2000:0x0000:0x00000000
ReadErr : MajorErr , 0x1000:0x0000:0x00000000
ReadErr : FatalErr , 0x1000:0x0000:0x00000000
[Read Failed] : DataRead failed : Connection fault!
[Read Failed] : wfixnv1
[READ_ERROR] : Connection/Battery or some unknown problem!

Reconnect Power/Cable!

JayDi · 11-10-2016, 11:09

Hello.
Start from change USB cable.

somonahmed · 11-10-2016, 11:33

yes change USB cable but same

JayDi · 11-10-2016, 11:35

Device work normally?

somonahmed · 11-10-2016, 11:46

yes Device work normally .only need this file backup

JayDi · 11-10-2016, 12:23

Then it strange device.
Have no idea with it yet.

11-10-2016, 11:05	#1 (permalink)
somonahmed No Life Poster Join Date: Mar 2007 Location: Comilla Posts: 797 Member: 465069 Status: Offline Sonork: 100.1661026 Thanks Meter: 190	what is problem this i am 3 times try but same Boot Ver : SPRD 773x eMMC loader v3 Infinity Sending FLASH FDL FLASH FDL Ready! Boot Ok! Model Name : V49 Model Brand : symphony Model Device: V49 AndrVersion : 5.1 BaseBand CPU: V49 Project Ver : V49_HW2_V9 Model Ext : V49 [Read Mode] : HSUSB : 0x3000 [FW_READER] : Reading Firmware Now ... [Read Ok] : u-boot-spl-16k.bin [Read Ok] : u-boot.bin [Read Ok] : u-boot-spl-16k.bin [Read Ok] : u-boot.bin [Read Ok] : prodnv.img [Read Ok] : sc7731g_CP0_modem.bin [Read Ok] : DSP_DM_Gx.bin ReadErr : MajorErr , 0x3000:0x0000:0x00000000 ReadErr : MajorErr , 0x2000:0x0000:0x00000000 ReadErr : MajorErr , 0x1000:0x0000:0x00000000 ReadErr : FatalErr , 0x1000:0x0000:0x00000000 [Read Failed] : DataRead failed : Connection fault! [Read Failed] : wfixnv1 [READ_ERROR] : Connection/Battery or some unknown problem! Reconnect Power/Cable!

11-10-2016, 11:09	#2 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Hello. Start from change USB cable.

11-10-2016, 11:33	#3 (permalink)
somonahmed No Life Poster Join Date: Mar 2007 Location: Comilla Posts: 797 Member: 465069 Status: Offline Sonork: 100.1661026 Thanks Meter: 190	yes change USB cable but same

11-10-2016, 11:35	#4 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Device work normally?

11-10-2016, 11:46	#5 (permalink)
somonahmed No Life Poster Join Date: Mar 2007 Location: Comilla Posts: 797 Member: 465069 Status: Offline Sonork: 100.1661026 Thanks Meter: 190	yes Device work normally .only need this file backup

11-10-2016, 12:23	#6 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Then it strange device. Have no idea with it yet.