GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)
-   -   ZTE X761 Dead After Flash (https://forum.gsmhosting.com/vbb/f296/zte-x761-dead-after-flash-808673/)

shahzaadbutt 08-18-2009 08:53

ZTE X761 Dead After Flash
 
COM84 [VCP1] selected
module v2.84
Device: ZTE-X761
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
"format ffs" active
write: Firmware
ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00[1].X761_Z2_SF_BFFA101_En_Es_Pt_Vodafone-Indie.B0M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
chip: 0001:6503:000E
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device rom info...
detection phase #1...
detect device rom info finished
rom info structure: 2nd [enhanced] generation
startup code area #1 is Ok
startup code area #1 backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.EFDEC 292.[ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z0_S_A07A10 5.BIN_4A6AE6A7].rpl
rom info detection finished
device-id: EFDEC292
rom info protocol ver: 04
ver. sw 1: ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z0_S_A07A10 5.BIN
ver. sw 2: X761_Z0_S_A07A105, 581995B5
ffs offset/size: 00D00000/00300000
ffs address assigned: 00D00000
detect device sec info...
detection phase #1...
.
detect device sec info finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
firmware patch sp-lock #0/0 applied
firmware patch sp-lock #1 is not required
firmware patch sp-lock #2 is not required
Special operation Done
Write ...
detect device sec info...
detection phase #1...
.
detect device sec info finished
startup code area #1 check...
startup code area #1 calculation...
startup code area #1 fixed
file saved: C:\Program Files\InfinityBox\MModule\backup_security\ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z0_S_A 07A105__system_log_EFDEC292_4A6AE6A7_20090818-124056.B0X.bin
Area: Firmware
flash: 98000300000001:18E59F00000000
Write: Firmware
detect device sec info...
detection phase #1...
.
detect device sec info finished
Write Done
Finalization ...
ffs formatting...
flash: 98000300000001:18E59F00000000
Finalization Done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z0_S_A 07A105__system_log_EFDEC292_4A6AE6A7_20090818-124956.B0X.bin
Finished, time used: 563 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

shahzaadbutt 08-18-2009 09:30

i flash again with firmware + eeprom now hang on white screen


Code:

COM84 [VCP1] selected
module  v2.84
Device: ZTE-X761
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00[1].X761_Z0_S_A07A105_En_Es.B0M.bin
skip: Customization/Language Pack
skip: Customization
write: Eeprom/ffs
ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z2_SF_BFFA105__ffs_20090817-142941.B0E.bin
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
chip: 0001:6503:000E
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device rom info...
detection phase #1...
detect device rom info finished
rom info structure: 2nd [enhanced] generation
startup code area #1 is Ok
startup code area #1 backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.EFDEC292.[ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z2_SF_BFFA103.BIN_FDF041C9].rpl
rom info detection finished
device-id: EFDEC292
rom info protocol ver: 04
ver. sw 1: ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z2_SF_BFFA103.BIN
ver. sw 2: X761_Z2_SF_BFFA103, 36BE0F02
ffs offset/size: 00E00000/00200000
ffs address assigned: 00E00000
detect device sec info...
detection phase #1...
.
detect device sec info finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
detect device sec info...
detection phase #1...
.
detect device sec info finished
startup code area #1 check...
startup code area #1 calculation...
startup code area #1 fixed
file saved: C:\Program Files\InfinityBox\MModule\backup_security\ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z2_SF_BFFA103__system_log_EFDEC292_FDF041C9_20090818-131409.B0X.bin
Area: Firmware
flash: 98000300000001:18E59F00000000
Write: Firmware
Area: Eeprom/ffs
flash: 98000300000001:18E59F00000000
Write: Eeprom/ffs
detect device sec info...
detection phase #1...
.
detect device sec info finished
Write Done
Finalization ...
Finalization Done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z2_SF_BFFA103__system_log_EFDEC292_FDF041C9_20090818-132422.B0X.bin
Finished, time used: 639 sec
Remove/Install battery now !


jepetu 08-18-2009 20:21

Quote:

Originally Posted by shahzaadbutt (Post 4759535)
i flash again with firmware + eeprom now hang on white screen

Your original phone firmware was BFFA105 (as per your backup says) so.. flash your phone with 'ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z2_SF_BFFA103_En_Fr_Es_Vodafone-Indie.B0M.bin' this is the more recent firmware in support maybe it can revive your X761, remember select "Format FFS" when flashing.

If your phone doesn't start only solution is to ask Infinity supporters to prepare flash from your backup that is newest.

Hope this can help.

InfinitySupport 08-18-2009 20:22

Hello,

1. make "format ffs" in "complete" mode.
2. try to flash phone with other firmware from support area

shahzaadbutt 08-19-2009 08:37

Quote:

Originally Posted by InfinitySupport (Post 4761043)
Hello,

1. make "format ffs" in "complete" mode.
2. try to flash phone with other firmware from support area

i already complete format and flash all firmwares from support area but no success



plz can u tell me i have read its full flash how can i flash with that readed file?

Faisal_Computer 08-19-2009 08:46

Quote:

Originally Posted by shahzaadbutt (Post 4762256)
i already complete format and flash all firmwares from support area but no success



plz can u tell me i have read its full flash how can i flash with that readed file?


Send that flash file to infinity they will convert and upload to support then you can do flash !!

just upload on Rapidshare or any other file hosting server and post link after some time you will able to get file from support and flash it !!

BR

Faisal_Computer

shahzaadbutt 08-19-2009 08:59

here is readed full flash before any operation when phone was locked and 100% ok
http://rapidshare.com/files/26840160...17-142532.html


plz infinity team convert and upload it on support area please


thanx

shahzaadbutt 08-19-2009 08:59

i have flash with this file but phone still dead
COM84 [VCP2] selected
module v2.84
Device: ZTE-X761
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
"format ffs" active
write: Firmware
ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00[1].X761_Z2_SF_BFFA103_En_Fr_Es_Vodafone-Indie.B0M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
chip: 0001:6503:000E
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device rom info...
detection phase #1...
detect device rom info finished
rom info structure: 2nd [enhanced] generation
startup code area #1 is Ok
startup code area #1 backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.EFDEC 292.[ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z0_S_A07A10 5.BIN_4A6AE6A7].rpl
rom info detection finished
device-id: EFDEC292
rom info protocol ver: 04
ver. sw 1: ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z0_S_A07A10 5.BIN
ver. sw 2: X761_Z0_S_A07A105, 581995B5
ffs offset/size: 00D00000/00300000
ffs address assigned: 00D00000
detect device sec info...
detection phase #1...
.
detect device sec info finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
firmware patch sp-lock #0/0 is not required
firmware patch sp-lock #1 is not required
firmware patch sp-lock #2 is not required
Special operation Done
Write ...
detect device sec info...
detection phase #1...
.
detect device sec info finished
startup code area #1 check...
startup code area #1 calculation...
startup code area #1 fixed
file saved: C:\Program Files\InfinityBox\MModule\backup_security\ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z0_S_A 07A105__system_log_EFDEC292_4A6AE6A7_20090819-124711.B0X.bin
Area: Firmware
flash: 98000300000001:18E59F00000000
Write: Firmware
detect device sec info...
detection phase #1...
.
detect device sec info finished
Write Done
Finalization ...
ffs formatting...
flash: 98000300000001:18E59F00000000
Finalization Done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z0_S_A 07A105__system_log_EFDEC292_4A6AE6A7_20090819-125613.B0X.bin
Finished, time used: 569 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !



the phone have originally this firmware
ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z2_SF_ BFFA105

shahzaadbutt 08-19-2009 10:57

successfully revived with my backup readed full flash, thanx to infinity team


COM84 [VCP1] selected
module v2.84
Device: ZTE-X761
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00[1].X761_Z2_SF_BFFA105_En_Fr_Es.B0M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
chip: 0001:6503:000E
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device rom info...
detection phase #1...
detect device rom info finished
rom info structure: 2nd [enhanced] generation
startup code area #1 is Ok
startup code area #1 backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.EFDEC 292.[ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z0_S_A07A10 5.BIN_4A6AE6A7].rpl
rom info detection finished
device-id: EFDEC292
rom info protocol ver: 04
ver. sw 1: ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z0_S_A07A10 5.BIN
ver. sw 2: X761_Z0_S_A07A105, 581995B5
ffs offset/size: 00D00000/00300000
ffs address assigned: 00D00000
detect device sec info...
detection phase #1...
.
detect device sec info finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
detect device sec info...
detection phase #1...
.
detect device sec info finished
startup code area #1 check...
warning: rpl file not found: C:\Program Files\InfinityBox\MModule\id.EFDEC292.[ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z2_SF_BFFA1 05.BIN_0C16B03A].rpl
warning: rpl file not found: C:\Program Files\InfinityBox\MModule\id.EFDEC292._ZTEMT25_07A _PCB01_GPRS_MT6225_S00.X761_Z2_SF_BFFA105.BIN_0C16 B03A_.rpl
startup code area #1 backup loaded
startup code area #1 calculation...
startup code area #1 fixed
file saved: C:\Program Files\InfinityBox\MModule\backup_security\ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z0_S_A 07A105__system_log_EFDEC292_4A6AE6A7_20090819-144145.B0X.bin
Area: Firmware
flash: 98000300000001:18E59F00000000
Write: Firmware
detect device sec info...
detection phase #1...
.
detect device sec info finished
Write Done
Finalization ...
Finalization Done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\ZTE-X761_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X761_Z0_S_A 07A105__system_log_EFDEC292_4A6AE6A7_20090819-145024.B0X.bin
Finished, time used: 545 sec
Remove/Install battery now !

justincel 08-19-2009 16:20

Quote:

Originally Posted by Faisal_Computer (Post 4762292)
Send that flash file to infinity they will convert and upload to support then you can do flash !!

just upload on Rapidshare or any other file hosting server and post link after some time you will able to get file from support and flash it !!

BR

Faisal_Computer

friend ilist solution for x761 vodafone dead?

Faisal_Computer 08-19-2009 16:26

sorry did not understand !! and if you want to ask any qua , then make a new thread will answer you , and please do not mix the topic
BR
Faisal_Computer

justincel 08-19-2009 16:34

Quote:

Originally Posted by Faisal_Computer (Post 4763322)
sorry did not understand !! and if you want to ask any qua , then make a new thread will answer you , and please do not mix the topic
BR
Faisal_Computer

ok your said waths solution for one x761 vodafone dead??

INGSOFT-GSM 08-19-2009 17:52

I have 5 phones killed by the bug again q infinity is not a flash in the post FLAS support to repair these phones

celcomputo2007 08-22-2009 19:53

flashing and turned on but now I get signal .... thank collaboration

elmoreno2009 09-13-2009 20:33

I have one that I stay the same after flashing.

that procedure is effective !!!!!!!!

InfinitySupport 09-14-2009 23:54

Quote:

Originally Posted by elmoreno2009 (Post 4842543)
I have one that I stay the same after flashing.

that procedure is effective !!!!!!!!

what is the same exactly ?

elmoreno2009 09-16-2009 18:20

GENTLEMEN OF INFINITY SUPPORT
Would you please FullFlash TO CLIMB A Movilnet ZTE X761 THIS TO ME START WITH CELLULAR Flashing For what ARE ALL THAT SUPPORT AND CONTINUES WITH SCREEN WHITE,

Appreciate your cooperation

Saulcell 09-17-2009 04:56

friend click in repair segurity area and coments result

elmoreno2009 09-17-2009 19:12

NO SIR
Flashing THIS PHONE WITH ALL THE FLASH OF SUPPORT YOU REPAIR THE SECURITY AREA lifted her EPROM OF YOU HAVE TRIED EVERYTHING.
THE PROBLEM IS THAT SUPPORT THE FLASH NOT LEAVE RUNNING

PLEASE I NEED A FLASH THAT KEEP RUNNING

strangerboy 09-17-2009 21:12

flash phone with x760 flash plus eeprom phone working 10000%%%%%%

InfinitySupport 09-19-2009 09:38

Quote:

Originally Posted by elmoreno2009 (Post 4854722)
NO SIR
Flashing THIS PHONE WITH ALL THE FLASH OF SUPPORT YOU REPAIR THE SECURITY AREA lifted her EPROM OF YOU HAVE TRIED EVERYTHING.
THE PROBLEM IS THAT SUPPORT THE FLASH NOT LEAVE RUNNING

PLEASE I NEED A FLASH THAT KEEP RUNNING

Hello,

All files in support area well tested.
You must use LATEST MModule software, download and install it now.
Flash phone again.

Do not forget to charge phone battery with external power supply !

cellcarcol 09-19-2009 22:39

solution, info here --> http://cellcarcol.forumcommunity.net...tpost#lastpost and http://cellcarcol.forumcommunity.net...tpost#lastpost

khuramhk 10-29-2009 20:50

my phone is white lsd after flash x760

cellcarcol 10-30-2009 00:47

Quote:

Originally Posted by khuramhk (Post 4983532)
my phone is white lsd after flash x760


which previously had the mobile version.

that countries and companies is

InfinitySupport 11-02-2009 17:06

Quote:

Originally Posted by khuramhk (Post 4983532)
my phone is white lsd after flash x760

Hello,

Try to flash phone with another firmware.
Also you can flash phone with repair eeprom files.

ivammer 11-02-2009 17:34

infinty supoort dont have any solution ...........

InfinitySupport 11-02-2009 19:17

Quote:

Originally Posted by ivammer (Post 4995244)
infinty supoort dont have any solution ...........

You are completely wrong !
You can repair any X761 without any problems, just flash phone with Infinity-Box with flash files from support area.
Also you must always use latest software from support area instead of make users confused with wrong messages.

Badrian 11-28-2009 01:09

same problem x761 unsuported version
 
i have flash with a lower version of mmodule and my x761 is now dead. I uploaded my backup http://www.4shared.com/dir/6529334/6cebb63/sharing.html. Please help me infinity team. tanks

InfinitySupport 11-28-2009 09:59

Quote:

Originally Posted by Badrian (Post 5085209)
i have flash with a lower version of mmodule and my x761 is now dead. I uploaded my backup http://www.4shared.com/dir/6529334/6cebb63/sharing.html. Please help me infinity team. tanks

you must read message #27 in current thread and this thread: http://forum.gsmhosting.com/vbb/showthread.php?t=788946

sufsal 12-05-2009 16:16

I have 4 phones killed by the bug again q infinity is not a flash in the post FLAS support to repair these phones
X761_Z5_Es_BFFA102, F2B6336A
need this file

InfinitySupport 12-05-2009 20:56

@sufsal
what bug you talk about ?
what is the problem exactly ?
if you had a problem with 1 phone, why yo continue to make the same with 3 other phones ?

answers to all questions should be given.

sufsal 12-07-2009 09:01

my phon is diad ofter unlocking and i flash another firmware
but phon not on i want this firmware
X761_Z5_Es_BFFA102, F2B6336A

InfinitySupport 12-07-2009 15:41

@sufsal
1. what bug you talk about ?
2. what is the problem exactly ?
3. if you had a problem with 1 phone, why you continue to make the same with 3 other phones ?
4. did you checked battery voltage ? What is battery voltage ?

answers to all questions should be given.

LAMINI SIDIK 08-20-2010 09:49

infinity team kindly help solve these.g-x760 dead after complete format.
i have trying flashing the phone with newer firmware from support are no luck.
enclose are the original firmware version.
ZTE-X760_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X760_Z15UK_ FS_BFFA110__ffs...

YellowBoss 08-20-2010 15:22

Quote:

Originally Posted by LAMINI SIDIK (Post 6232399)
infinity team kindly help solve these.g-x760 dead after complete format.
i have trying flashing the phone with newer firmware from support are no luck.
enclose are the original firmware version.
ZTE-X760_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X760_Z15UK_ FS_BFFA110__ffs...

Hi,

1. Try to flash phone with this file: ZTE-X760_ZTEMT25_07A_PCB01_GPRS_MT6225_S00.X760_Z10UK_ GD_BFFA112_En.B0M.bin

2. do you have original full flash backup ?


All times are GMT +1. The time now is 08:31.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.31103 seconds with 6 queries

SEO by vBSEO