5230 rm-588 only vibrate after flash
 

HEY GUYS IVE TRIED TO FLASH CUSTOM FIRMWARE ON THIS PHONE THEN IT DIED..AFTER THAT I FLASH WITH GREATER FIRMWARE NOW ONLY VIBRATE...IVE FLASHED ALL FIRMWARE UP TO THE LEATES BUT STILL NOTHING....IT FLASHES SUCCESFULL WITH JAF AND MX KEY VIA USB
ANYONE HAVE A SOLUTION FOR ME PLEASE THANK YIOU

PRESS POWER ON NOW!
Searching for phone...Found
Sending RAW loader...
Using 009.012.005
Elf2flash 09.11.000
CMT RAW loader...
Patching RAW boot step1...
Patching RAW boot step2...
Patching RAW boot step3...
Sending RAW Loader...
....................Loader Sent!
Stage 2 starting............PUBKEYS already sent...
PUBKEYS already sent...
........Phone prepared OK!
Waiting for the phone to boot...
Searching for phone...
Status byte: 8000
Selecting CMT flash...
Result: 0000
Phone is in flash mode...
CMT blocks: 665, APE blocks: 0
Erasing cmt...
Processing G:\NOKIA SOFTWARE\RM-588\RM-588_51.9.002_prd.core.C00...
Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000
Erasing cmt zone 00083400 - 003FFFFF ... Erase result: 0000
Erasing cmt zone 00400000 - 007FFFFF ... Erase result: 0000
Erasing cmt zone 00800000 - 00D5FFFF ... Erase result: 0000
Erasing cmt zone 00D60000 - 09E5FFFF ... Erase result: 0000
Partition result: 0014
Processing G:\NOKIA SOFTWARE\RM-588\RM-588_51.9.002_prd.rofs2.V25...
Erasing cmt zone 06FE0000 - 0915FFFF ... Erase result: 0000
Processing G:\NOKIA SOFTWARE\RM-588\RM-588_51.9.002_C01_prd.rofs3.fpsx...
Erasing cmt zone 09160000 - 09E5FFFF ... Erase result: 0000
Processing G:\NOKIA SOFTWARE\RM-588\RM-588_51.0.002_000_001_U002.uda.fpsx...
Erasing cmt zone 09E60000 - 0F47FFFF ... Erase result: 0000
Send CMT CFG...

Writing cmt...
Processing G:\NOKIA SOFTWARE\RM-588\RM-588_51.9.002_prd.core.C00...
Sending CMT HASH for ADA
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for RAP3NAND
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
cmt->PAPUB keys already sent...
Sending CMT HASH for SOS*UPDAPP
Sending CMT HASH for SOS*ENO
Sending CMT HASH for SOS*DSP0
Sending CMT HASH for SOS*ISASW
Sending CMT HASH for SOS+CORE
Sending CMT HASH for SOS+ROFS1
Processing G:\NOKIA SOFTWARE\RM-588\RM-588_51.9.002_prd.rofs2.V25...
Sending CMT HASH for SOS+ROFS2
Write result 27: 1701
Processing G:\NOKIA SOFTWARE\RM-588\RM-588_51.9.002_C01_prd.rofs3.fpsx...
Sending CMT HASH for SOS+ROFS3
Write result 27: 1701
Processing G:\NOKIA SOFTWARE\RM-588\RM-588_51.0.002_000_001_U002.uda.fpsx...
Rebooting...
Finishing CMT session...
Restarting CMT...
Pooling phone...
Phone not found...
Second try...
Phone not found...
Done!

in atf first erase and reflash

flash with same version

Flash with latest version file if not done erase whole flash first of all complete backup save to ur computer and then reinstall with latest vesion file ur phone will be fine work 100%

Phoenix ME SE FILE download phone code dekh ke problem sol ho jaye ga 1000000%

I did 1mill times.stil n0thing..sory 4 late reply,i dont have box..bt thank you guys..i know someone with UNIVERSAL BOX and JAF..

must do this steps with atf box
1- flash your phone with same product code
2- sl3 simlock recovery .and will get the important pm file
3- backup rpl
4-erase phone
5- flash phone again
6-restore rpl backup
7- authorised phone
8-write pm witch recovered before
end

good luck

thank you sir verymuch:)
but my product code doesnt seem to be in any latest version...and im afraid if i downgrade .....

hello Flash PHone With Cable F-BUS 1000000/10000000000

IVE BEEN AN IDIOT not follow your xact procudre'''now phone is on and imei is 12345.....i jus flashed it with orignal product code (eventualy downgrde)..im using mxkey flashing with usb coz i dont have box....yet again thnx for the quick tut..but im still trying...this is my 1st time doing sumthing like this eventho ive been reading alot about this "imei"corrupt...i jus hope my mxkey gona help...im downloading latest firm and setup for mxkey....practice make perfect dead or alive:D

plz wrie this rpl



after write plz backup rpl data of phone

If u dont have rpl,important pm&simlock data dont erase or down grade the phone.Try with another file with higher version ur prblm will b solved..I have same prblm yestr day...i just flshd other fil n my prblm solved

Download n flash with this, file frm Nokia Data Package Manager Lite.
RM-625 INDIA BLA..version 51.002

will try it now thank you

Flash the phone with same product code.

Br.
Vijendra Saini.®