Diego sw+phoenix2004 crk+phoenix2005=6680 USB FLASHING OK - GSM-Forum

landy · 05-13-2006, 22:33

Yes, i´ve tested.-

Nokia 6680 fw:2.5
Install Diego 3.06
Install phoenix 2004 with crack
Restart
Install phoenix_service_sw_2005_36_7_112.exe or later, with phoenix 2004 open. When ends, choose not restart, close 2004 and run 2005, and flash.

Enjoy this, in 10 minutes i have fw: 5.04 from 15-02-06

BR Landy.-

infogsm · 05-13-2006, 22:46

THANKS FOR SHARING BRO
but where are those sw ?
br

djgsm · 05-14-2006, 01:16

where this software?
thanks

elsokary · 05-14-2006, 08:18

where this softwear

landy · 05-14-2006, 08:23

http://www.dotsis.com/mobile_phone/s...t=12976&page=2

abdulmueid · 05-14-2006, 09:41

Can someone PLEASE upload just the crack for Phoenix 2004? I already have the installation file and do not want to download the whole RAR file again.

Please guys, you know you can help!

Del_Pierro · 05-14-2006, 14:34

Hi,

@ abdulmueid: here is the crack you requested...

Could someone please take a look at the snapshot and tell me what to do there? I am not able to flash my Nokia 6630 simply because I don't know where the files are located. I installed the latest Firmware update (an .exe file) but should't I get some image-files to flash somewhere?

Greetz and thanx in advance...

Del_Pierro · 05-14-2006, 16:03

Finally my phone has been recognised... but I can't flash:

Flashing failed.

Error occured during the flashing procedure.

Matching adl loader was not found for this device, USB flashing not possible.

HRESULT 0x8401225b (-2080300453)

Flash: E_FPI_NO_LOADER_FOUND

Any ideas?

schwantz · 05-14-2006, 16:46

I have this a long time ago, but dont put in web, but for all of you see this, i have flash my N70

[IMG]http://www.****************/motorola/1.gif[/IMG]

[IMG]http://www.****************/motorola/2.gif[/IMG]

[IMG]http://www.****************/motorola/3.gif[/IMG]

[IMG]http://www.****************/motorola/6.gif[/IMG]

[IMG]http://www.****************/motorola/8.gif[/IMG]

bidoun · 05-14-2006, 19:49

This TUTORIEL explains how to update its Nokia BB5 with the all last firmware, just with a cable USB DKU-2 and the software PHOENIX Service of Nokia!
(Without dongle has to buy!!!)

Thus after the warnings and for those which want to continue, let us pass to handling without waiting more

BEFORE STARTING!

For beginning this tutoriel, It will be necessary:
To charge the battery full

uninstall Nokia PC continuation and Nokia conectivity cable driver!
INSTALLATION OF DIEGO

First download all the files which are has this address:

Unpack the files 55667793_Diego_3_06.

You will have this file has the end: 55667793_Diego_3_06.msi

Launch it and install it!

At the time of l_Installation, if it puts an error to you, c’est which you do not n’avez désinstaller Nokia connectivity cable driver!

Diego installed!

INSTALLATION OF PHOENIX SERVICE 2004

Now we will install phoenix services 2004!
For that download all the rar files which are has this address:

Unpack the files Phoenix 2004 with crack.rar

Open to first the ace who is in the file, open it, do not launch it now!

Start to install phoenix 2004.
At the time of l_installation there will be a message.

!!!!!! It will be necessary well to follow what follows !!!!

Support on starting again and launching the ace immediately afterwards!
If you are not fast enough it the message and must be open again the ace will notice you,
Without the throw, to support on starting again and carrying out the ace!

To the end of l_installation, phoenix will require of you to start again, start again the PC.

Once the read PC there will be 2 messages d_error always made OK then finish.

This stage you correctly installed phoenix service 2004.

Then one will install the file

Nokia_Conn_Cable_Driver_159_ita.rar

Nokia_Conn_Cable_Driver_159_ita.rar qu’il will be necessary unpack and to install, if it asks you to start again, it will have to be done!

LAUNCHING OF PHOENIX SERVICE 2004
On your desk there is the short cut of phoenix.
Launch it and with the launching of phoenix there will be 4 times "dskey not found"!*
*Normaly it's always made "ok"!

phoenix should be open!

Arrived has this stage closed not the software! It will have just to be decreased!

Then download all the rar which is on this address:

Unpack the file and you will have this file: phoenix_service_sw_2005_36_7_112.exe

Launch phoenix_service_sw_2005_36_7_112.exe!
there should not be d_error!

And especially the end of l_installation has! Not to start again not! To notch "to start again my PC later"!
And to finish!

Then you can close Phoenix which you had decreased! And start again it!

Now you can connect your cable USB DKU2 with the PC, and connect your mobile phone there.

Wait until Windows installs the drivers, then not to touch more has your mobile phone because the cable catched not well and could be out!

Then in phoenix made this handling:

Make file/Manage conection/Add/Manual/select USB/ to support on END/ Aplly and Close.

To download the file RM36 which is on this RM-36.rar bond

Unpack the file RM36 on the desk.

It must have 2 file:
1 which finished by .COR
1 other which finished by .v30
Let us pass TO The FLASHAGE

Return on phoenix, make:

flashing/ sw update
On right-hand side of Code it will have to be written RM36 if it's the case, that wants to say that you are on the good way.[list]
On the first line with Image, made browse Slips by and will seek your file ending in COR.

On the second line with PPM, made browse Slips by and will seek your file which ends in V30.
Becarefull, it will be necessary to really pay attention during the flash and do not touch especially your mobile!!!

Made START and wait until it is a message there!

He will say to support on the button ONE to you Telephone and ok on the Phoenix software! And it's finish my friends!

For those which want flasher more recent Nokia (ex: N70, N90).
It will be necessary for that to follow the same manipulation exactly but except install PHOENIX 2005, it will be necessary to install PHOENIX 2006

darrwaters · 05-14-2006, 20:10

When I tried to do this to my 6680 it failed to connect, so I un-installed everything and re-installed everything again but instead of installing Pheonix 2005 I installed the 2006 version and everything thing worked perfectly. 100%

Been after flashing this phone for ages to get rid of the 3 branding...

corsagt1989 · 05-14-2006, 20:56

Confirm Working on 6630 with latest firmware

Del_Pierro · 05-14-2006, 21:04

Well, I did it exactly "by the book" and the software works fine and the pphone is recognized. But flashing leads to an error, I can't see the reason why:

This is the complete LOG:

Reading data from phone
Reading phone information
Reading product type
Reading product code
Reading PSN
Get flash file names
Reading IMEI
Reading HW version
Reading flash settings from file(s)
RD info:
Starting to flash Charlie HW 5040
Because this is older than 5120 phone may lose its IMEI or require user disk formatting after flashing
Starting AdlLoaders, wait 15 seconds...
Starting flash...
Starting USB flashing.
Cmt->Trying to verify communication 1 of 2
Cmt->Communication verified to AdlServer.
Cmt->AdlServer: Phone info requested succesfully
Cmt->Trying to verify communication 1 of 3
Cmt->Communication verified to AdlServer.
Cmt->AdlServer: Phone info requested succesfully
Flashing failed.

The error pop up message says:

Flashing failed.

Error occured during the flashing procedure.

Matching adl loader was not found for this device, USB flashing not possible.

HRESULT 0x8401225b (-2080300453)

Flash: E_FPI_NO_LOADER_FOUND

Latest phoenix 2006, latest firmware updates for Nokia 6630 and latest usb connection driver. Strange....

Lomnica_city · 05-14-2006, 21:35

I'm geting the same error!?And I have the software that others managed to use succesfully!?
Pozdrav

Del_Pierro · 05-14-2006, 22:02

RM-1 Phone Data Package EURO v.11.00 (MCU 6.03.08) Installation
================================================== ==========================

NOTE !!! Use Phoenix Service Software 2005.44.4.120 (or newer) and flash update 3.35.002 (or newer)

What is this "flash update" mentioned in the readme.txt above please?

And I always get the message "The product code is different from the one scanned from the phone. Do you want to continue flashing?" When I choose any of the Rm-1 flashfiles.

05-13-2006, 22:33	#1 (permalink)
landy No Life Poster Join Date: Jan 2001 Location: Madrid, Spain Posts: 767 Member: 3075 Status: Offline Thanks Meter: 2	Diego sw+phoenix2004 crk+phoenix2005=6680 USB FLASHING OK Yes, i´ve tested.- Nokia 6680 fw:2.5 Install Diego 3.06 Install phoenix 2004 with crack Restart Install phoenix_service_sw_2005_36_7_112.exe or later, with phoenix 2004 open. When ends, choose not restart, close 2004 and run 2005, and flash. Enjoy this, in 10 minutes i have fw: 5.04 from 15-02-06 BR Landy.-

05-14-2006, 20:56	#12 (permalink)
corsagt1989 Junior Member Join Date: Aug 2005 Age: 41 Posts: 27 Member: 173882 Status: Offline Thanks Meter: 1	Confirm Confirm Working on 6630 with latest firmware

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6680 usb flashing	MOHMEDPMB	J.A.F. By Jafsupport.com	4	04-24-2009 05:46
6131 dead usb flashing ok but no gallery after normal usb Error reading ape ver!	jackie2573	J.A.F. By Jafsupport.com	0	04-08-2008 08:00
6680 problem - flash ok, but dead	James_S	HWK	9	10-13-2007 09:35
6680 mcu flashing ok ppm not flash	rahmanp	Nokia Hardware & Hardware Repair	2	02-27-2007 10:12

05-13-2006, 22:46	#2 (permalink)
infogsm Cheater -Don't Deal with him- Join Date: Nov 2002 Location: Tunisia Age: 45 Posts: 4,282 Member: 18022 Status: Offline Sonork: 1574868 Thanks Meter: 192	THANKS FOR SHARING BRO but where are those sw ? br

05-14-2006, 01:16	#3 (permalink)
djgsm Freak Poster Join Date: Jun 2004 Location: portugal Age: 58 Posts: 107 Member: 68038 Status: Offline Thanks Meter: 2	where this software? thanks

05-14-2006, 08:18	#4 (permalink)
elsokary No Life Poster Join Date: Jun 2003 Location: EGYPT Age: 44 Posts: 1,229 Member: 31027 Status: Offline Thanks Meter: 179	where this softwear

05-14-2006, 08:23	#5 (permalink)
landy No Life Poster Join Date: Jan 2001 Location: Madrid, Spain Posts: 767 Member: 3075 Status: Offline Thanks Meter: 2	http://www.dotsis.com/mobile_phone/s...t=12976&page=2

05-14-2006, 09:41	#6 (permalink)
abdulmueid Junior Member Join Date: Feb 2006 Posts: 1 Member: 231992 Status: Offline Thanks Meter: 0	Can someone PLEASE upload just the crack for Phoenix 2004? I already have the installation file and do not want to download the whole RAR file again. Please guys, you know you can help!

05-14-2006, 16:03	#8 (permalink)
Del_Pierro Junior Member Join Date: May 2006 Posts: 8 Member: 276314 Status: Offline Thanks Meter: 0	Finally my phone has been recognised... but I can't flash: Flashing failed. Error occured during the flashing procedure. Matching adl loader was not found for this device, USB flashing not possible. HRESULT 0x8401225b (-2080300453) Flash: E_FPI_NO_LOADER_FOUND Any ideas?

05-14-2006, 16:46	#9 (permalink)
schwantz No Life Poster Join Date: Jun 2001 Location: Portugal Age: 48 Posts: 1,455 Member: 4975 Status: Offline Thanks Meter: 612	I have this a long time ago, but dont put in web, but for all of you see this, i have flash my N70 [IMG]http://www.**************/motorola/1.gif[/IMG] [IMG]http://www.************/motorola/2.gif[/IMG] [IMG]http://www.************/motorola/3.gif[/IMG] [IMG]http://www.************/motorola/6.gif[/IMG] [IMG]http://www.**************/motorola/8.gif[/IMG]

05-14-2006, 19:49	#10 (permalink)
bidoun Insane Poster Join Date: May 2006 Posts: 68 Member: 276474 Status: Offline Thanks Meter: 11	This TUTORIEL explains how to update its Nokia BB5 with the all last firmware, just with a cable USB DKU-2 and the software PHOENIX Service of Nokia! (Without dongle has to buy!!!) Thus after the warnings and for those which want to continue, let us pass to handling without waiting more BEFORE STARTING! For beginning this tutoriel, It will be necessary: To charge the battery full uninstall Nokia PC continuation and Nokia conectivity cable driver! INSTALLATION OF DIEGO First download all the files which are has this address: Unpack the files 55667793_Diego_3_06. You will have this file has the end: 55667793_Diego_3_06.msi Launch it and install it! At the time of l_Installation, if it puts an error to you, c’est which you do not n’avez désinstaller Nokia connectivity cable driver! Diego installed! INSTALLATION OF PHOENIX SERVICE 2004 Now we will install phoenix services 2004! For that download all the rar files which are has this address: Unpack the files Phoenix 2004 with crack.rar Open to first the ace who is in the file, open it, do not launch it now! Start to install phoenix 2004. At the time of l_installation there will be a message. !!!!!! It will be necessary well to follow what follows !!!! Support on starting again and launching the ace immediately afterwards! If you are not fast enough it the message and must be open again the ace will notice you, Without the throw, to support on starting again and carrying out the ace! To the end of l_installation, phoenix will require of you to start again, start again the PC. Once the read PC there will be 2 messages d_error always made OK then finish. This stage you correctly installed phoenix service 2004. Then one will install the file Nokia_Conn_Cable_Driver_159_ita.rar Nokia_Conn_Cable_Driver_159_ita.rar qu’il will be necessary unpack and to install, if it asks you to start again, it will have to be done! LAUNCHING OF PHOENIX SERVICE 2004 On your desk there is the short cut of phoenix. Launch it and with the launching of phoenix there will be 4 times "dskey not found"!* *Normaly it's always made "ok"! phoenix should be open! Arrived has this stage closed not the software! It will have just to be decreased! Then download all the rar which is on this address: Unpack the file and you will have this file: phoenix_service_sw_2005_36_7_112.exe Launch phoenix_service_sw_2005_36_7_112.exe! there should not be d_error! And especially the end of l_installation has! Not to start again not! To notch "to start again my PC later"! And to finish! Then you can close Phoenix which you had decreased! And start again it! Now you can connect your cable USB DKU2 with the PC, and connect your mobile phone there. Wait until Windows installs the drivers, then not to touch more has your mobile phone because the cable catched not well and could be out! Then in phoenix made this handling: Make file/Manage conection/Add/Manual/select USB/ to support on END/ Aplly and Close. To download the file RM36 which is on this RM-36.rar bond Unpack the file RM36 on the desk. It must have 2 file: 1 which finished by .COR 1 other which finished by .v30 Let us pass TO The FLASHAGE Return on phoenix, make: flashing/ sw update On right-hand side of Code it will have to be written RM36 if it's the case, that wants to say that you are on the good way.[list] On the first line with Image, made browse Slips by and will seek your file ending in COR. On the second line with PPM, made browse Slips by and will seek your file which ends in V30. Becarefull, it will be necessary to really pay attention during the flash and do not touch especially your mobile!!! Made START and wait until it is a message there! He will say to support on the button ONE to you Telephone and ok on the Phoenix software! And it's finish my friends! For those which want flasher more recent Nokia (ex: N70, N90). It will be necessary for that to follow the same manipulation exactly but except install PHOENIX 2005, it will be necessary to install PHOENIX 2006

05-14-2006, 20:10	#11 (permalink)
darrwaters Junior Member Join Date: May 2003 Location: Grantham uk Age: 50 Posts: 38 Member: 29805 Status: Offline Thanks Meter: 0	When I tried to do this to my 6680 it failed to connect, so I un-installed everything and re-installed everything again but instead of installing Pheonix 2005 I installed the 2006 version and everything thing worked perfectly. 100% Been after flashing this phone for ages to get rid of the 3 branding...

05-14-2006, 21:04	#13 (permalink)
Del_Pierro Junior Member Join Date: May 2006 Posts: 8 Member: 276314 Status: Offline Thanks Meter: 0	Well, I did it exactly "by the book" and the software works fine and the pphone is recognized. But flashing leads to an error, I can't see the reason why: This is the complete LOG: Reading data from phone Reading phone information Reading product type Reading product code Reading PSN Get flash file names Reading IMEI Reading HW version Reading flash settings from file(s) RD info: Starting to flash Charlie HW 5040 Because this is older than 5120 phone may lose its IMEI or require user disk formatting after flashing Starting AdlLoaders, wait 15 seconds... Starting flash... Starting USB flashing. Cmt->Trying to verify communication 1 of 2 Cmt->Communication verified to AdlServer. Cmt->AdlServer: Phone info requested succesfully Cmt->Trying to verify communication 1 of 3 Cmt->Communication verified to AdlServer. Cmt->AdlServer: Phone info requested succesfully Flashing failed. The error pop up message says: Flashing failed. Error occured during the flashing procedure. Matching adl loader was not found for this device, USB flashing not possible. HRESULT 0x8401225b (-2080300453) Flash: E_FPI_NO_LOADER_FOUND Latest phoenix 2006, latest firmware updates for Nokia 6630 and latest usb connection driver. Strange....

05-14-2006, 21:35	#14 (permalink)
Lomnica_city Freak Poster Join Date: May 2006 Location: Lomnica, Serbia Age: 43 Posts: 288 Member: 275559 Status: Offline Thanks Meter: 6	I'm geting the same error!?And I have the software that others managed to use succesfully!? Pozdrav

05-14-2006, 22:02	#15 (permalink)
Del_Pierro Junior Member Join Date: May 2006 Posts: 8 Member: 276314 Status: Offline Thanks Meter: 0	RM-1 Phone Data Package EURO v.11.00 (MCU 6.03.08) Installation ================================================== ========================== NOTE !!! Use Phoenix Service Software 2005.44.4.120 (or newer) and flash update 3.35.002 (or newer) What is this "flash update" mentioned in the readme.txt above please? And I always get the message "The product code is different from the one scanned from the phone. Do you want to continue flashing?" When I choose any of the Rm-1 flashfiles.