unknown provider - GSM-Forum

avn · 09-27-2008, 18:35

6500s when i put sim phone restricted.imei good but provider unknown .i bought rpl . After write rpl also stll same . i used for writeing rpl jaf,mtbox & dss soft.please help me

thanks

stanner_austin · 09-28-2008, 18:08

Quote:

Originally Posted by avn

6500s when i put sim phone restricted.imei good but provider unknown .i bought rpl . After write rpl also stll same . i used for writeing rpl jaf,mtbox & dss soft.please help me

thanks

for helping you i need log.
and check sticky thread last post by me why some phone don't accept rpl sim lock data..
and 6500s have 120 as simlock status and 308 as crypted checksum impossible to decode field..

so you can try with both field erasing..
and rewrite rpl with usb or fbus..

avn · 09-28-2008, 20:37

Quote:

Originally Posted by stanner_austin

for helping you i need log.
and check sticky thread last post by me why some phone don't accept rpl sim lock data..
and 6500s have 120 as simlock status and 308 as crypted checksum impossible to decode field..

so you can try with both field erasing..
and rewrite rpl with usb or fbus..

i erased by BB5Erase_UNI_rapido fille & erase pm also after full flash & write full pm & rpl but still same

this is that rpl logo

Scanning RPL file...
NPC DATA OK...
VARIANT DATA NOT FOUND...
CCC DATA OK...
HWC DATA OK...
NPC APE DATA NOT FOUND...
VARIANT APE DATA NOT FOUND...
CCC APE DATA NOT FOUND...
HWC APE DATA NOT FOUND...
SIMLOCK DATA OK...
SIMLOCK KEY DATA OK...
SUPERDONGLE KEY DATA OK...
CMLA KEY DATA OK...
WMDRM PD DATA OK...
Connecting to phone...
Writing SIMLOCK DATA and SIMLOCK DATA KEY...
Writing SUPER DONGLE KEY...
Writing CMLA KEY DATA...
Writing WMDRM PD DATA...
FAST PHONE detected!
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Writing NPC DATA...
Writing CCC DATA...
Writing HWC DATA...
Restarting phone...
Done!

avn · 09-29-2008, 17:42

please help me iam waiting for your replay

thanks

stanner_austin · 09-29-2008, 17:49

sorry for late
use this erase file as mcu.
flash it.
flash with new firmware
phone will be on with imei damaged.

write rpl now.

modified pm also attached you need if phone sp area back and phone show contact service.

avn · 10-02-2008, 10:25

Quote:

Originally Posted by stanner_austin

sorry for late
use this erase file as mcu.
flash it.
flash with new firmware
phone will be on with imei damaged.

write rpl now.

modified pm also attached you need if phone sp area back and phone show contact service.

cann't erase by this erase file.tried by jaf & ufs .after erase phone still power on & imei same . i think not erasing

thanks

chrislhen · 10-02-2008, 10:37

in JAF tick the FILE SYSTEM FORMAT and click SERVICE..after that rewrite the RPL..your problem will be solve..

SilentHawk · 10-02-2008, 10:44

Quote:

Originally Posted by avn

6500s when i put sim phone restricted.imei good but provider unknown .i bought rpl . After write rpl also stll same . i used for writeing rpl jaf,mtbox & dss soft.please help me

thanks

this is important on how to use or write RPL to the BB5 phone

Make sure that the phone is in LOCAL MODE or TEST MODE before you write the calculated RPL., that's the secret on how to use bb5 calculated rpl.

tested and proven by me 1,0001%

br

avn · 10-02-2008, 16:20

Quote:

Originally Posted by stanner_austin

modified pm also attached you need if phone sp area back and phone show contact service.

sir 1 n73 also same problem. provider notfound after write rpl still no provider.but when i trying to write rpl logs diffrent .

Scanning RPL file...
NPC DATA OK...
VARIANT DATA OK...
CCC DATA NOT FOUND...
HWC DATA NOT FOUND...
NPC APE DATA NOT FOUND...
VARIANT APE DATA NOT FOUND...
CCC APE DATA NOT FOUND...
HWC APE DATA NOT FOUND...
SIMLOCK DATA OK...
SIMLOCK KEY DATA OK...
SUPERDONGLE KEY DATA OK...
CMLA KEY DATA OK...
WMDRM PD DATA NOT FOUND...
Connecting to phone...
Writing SIMLOCK DATA and SIMLOCK DATA KEY...
Writing SUPER DONGLE KEY...
Writing CMLA KEY DATA...
Failed!
FAST PHONE detected!
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Writing NPC DATA...
Writing VARIANT DATA...
Restarting phone...
phone erase by erase file after flashed . after put rpl imei ok but provider unknown
rpl wrong ?

thanks

stanner_austin · 10-02-2008, 16:32

@avn
for n73 make other thread.

for 6500s attached special rpl to damage your certificate area.
use jaf tick on plan rpl select my rpl and write it to DAMAGE PHONE..

after write this your phone imei should become 1234567..
check phone with it.
write modified pm WITHOUT SX4 NEED.

test phone again working?
if yes
now write calculated repair rpl.
replug cable to phone
do info to test phone imei and sim lock area.
possible phone may in contact service just do sx4 and write modified pm.
please be sure that you have to do SX4 and when its show DONE after that you have to select modified pm.
without it it won't work..

avn · 10-02-2008, 18:00

Quote:

Originally Posted by stanner_austin

@avn
for n73 make other thread.

for 6500s attached special rpl to damage your certificate area.
use jaf tick on plan rpl select my rpl and write it to DAMAGE PHONE..

..

i did but still same .that i bought rpl any wrong ?

log

BB5 SECZONE DAMAGE by Chevli.rpl

PHP Code:

  Scanning RPL file...
NPC DATA OK...
VARIANT DATA OK...
CCC DATA NOT FOUND...
HWC DATA NOT FOUND...
NPC APE DATA NOT FOUND...
VARIANT APE DATA NOT FOUND...
CCC APE DATA NOT FOUND...
HWC APE DATA NOT FOUND...
SIMLOCK DATA NOT FOUND...
SIMLOCK KEY DATA NOT FOUND...
SUPERDONGLE KEY DATA NOT FOUND...
CMLA KEY DATA NOT FOUND...
WMDRM PD DATA NOT FOUND...
Connecting to phone...
FAST PHONE detected!
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Writing NPC DATA...
Writing VARIANT DATA...
Restarting phone...
 
Done!

after write info

PHP Code:

  MCU SW version: V 06.60
07-03-08
RM-240
(c) Nokia            
HW version: 1001
PCI version: 
RFIC version:  17141714
DSP version: 
ICPR71_08w09
LCD version: SHARP
PPM version: V 06.60
07-03-08
RM-240
(c) Nokia            
F
Retu version: 15
Tahvo version: 22
Content Pack version: Content: f
V 06.60
07-03-08
RM-240
(c) Nokia            
Production serial number: CHG266192
Product code: 0560704
Module code: 0203327
Basic production code: 0550669
Flash code: 
Order number: 
Product specific data: 
Long production SN: 0
ATO: 
Default SN type: 
IMEI plain: 12345610654321?
IMEI spare to net: 1A 32 54 16 60 45 23 01 
IMEI SV to net: 13 32 54 16 60 45 23 31 F3 
LOCK STATUS:
CONFIG KEY: 8000000000000002
PROVIDER KEY: 2380600000000000
Provider: Unknown provider
Key Code count: 0, FBUS Code count: 0
Block 1:
Lock 1: CLOSED -> Lock Data: 23806F

after write calculated rpl info

PHP Code:

  MCU SW version: V 06.60
07-03-08
RM-240
(c) Nokia            
HW version: 1001
PCI version: 
RFIC version:  17141714
DSP version: 
ICPR71_08w09
LCD version: SHARP
PPM version: V 06.60
07-03-08
RM-240
(c) Nokia            
F
BT MCM version: 2222-143
Retu version: 15
Tahvo version: 22
Content Pack version: Content: f
V 06.60
07-03-08
RM-240
(c) Nokia            
Production serial number: CHG266192
Product code: 0560704
Module code: 0203327
Basic production code: 0550669
Flash code: 
Order number: 
Product specific data: 
Long production SN: 0
ATO: 
Default SN type: 
IMEI plain: 352027024101369
IMEI spare to net: 3A 25 20 07 42 01 31 06 
IMEI SV to net: 33 25 20 07 42 01 31 36 F3 
LOCK STATUS:
CONFIG KEY: 8000000000000002
PROVIDER KEY: 2380600000000000
Provider: Unknown provider
Key Code count: 0, FBUS Code count: 0
Block 1:
Lock 1: CLOSED -> Lock Data: 23806F

thanks

stanner_austin · 10-03-2008, 08:26

heheheheheheh
lolllllz
reason is simple jaf providerlist.ini don't have your provider info..

see here
LOCK STATUS:
CONFIG KEY: 8000000000000002
PROVIDER KEY: 2380600000000000
Provider: Unknown provider
Key Code count: 0, FBUS Code count: 0
Block 1:
Lock 1: CLOSED -> Lock Data: 23806F

means its perfect lock area..
phone is locked to specif provider work ok without sim but show locked with sim.
even i also don't know which provider it is.
so simply unknown provider for jaf and others tools also..

avn · 10-03-2008, 14:51

now I am understanding

LOCK STATUS:
CONFIG KEY: 8000000000000002
PROVIDER KEY: 2380600000000000
Provider: Unknown provider
Key Code count: 0, FBUS Code count: 0
Block 1:
Lock 1: CLOSED -> Lock Data: 23806F

how can I understand which provider .for purchasing unlock code

thanks

blue_life1111 · 10-04-2008, 04:37

Quote:

Originally Posted by avn

now I am understanding

LOCK STATUS:
CONFIG KEY: 8000000000000002
PROVIDER KEY: 2380600000000000
Provider: Unknown provider
Key Code count: 0, FBUS Code count: 0
Block 1:
Lock 1: CLOSED -> Lock Data: 23806F

how can I understand which provider .for purchasing unlock code

thanks

well . you can try check IMEI with NOKIA server .

stanner_austin · 10-09-2008, 09:50

Quote:

Originally Posted by avn

now I am understanding

LOCK STATUS:
CONFIG KEY: 8000000000000002
PROVIDER KEY: 2380600000000000
Provider: Unknown provider
Key Code count: 0, FBUS Code count: 0
Block 1:
Lock 1: CLOSED -> Lock Data: 23806F

how can I understand which provider .for purchasing unlock code

thanks

its "Denmark" any provider don't know which one.
and sorry for late.

@MANH.NB
only thanks button no thanks post please.

09-27-2008, 18:35	#1 (permalink)
avn Freak Poster Join Date: Oct 2006 Location: uae Age: 37 Posts: 195 Member: 361731 Status: Offline Thanks Meter: 204	unknown provider 6500s when i put sim phone restricted.imei good but provider unknown .i bought rpl . After write rpl also stll same . i used for writeing rpl jaf,mtbox & dss soft.please help me thanks

10-03-2008, 08:26	#12 (permalink)
stanner_austin No Life Poster Join Date: Jan 2004 Location: Unknown Age: 39 Posts: 9,227 Member: 49752 Status: Offline Sonork: QQ:1474246528 Thanks Meter: 6,085	heheheheheheh lolllllz reason is simple jaf providerlist.ini don't have your provider info.. see here LOCK STATUS: CONFIG KEY: 8000000000000002 PROVIDER KEY: 2380600000000000 Provider: Unknown provider Key Code count: 0, FBUS Code count: 0 Block 1: Lock 1: CLOSED -> Lock Data: 23806F means its perfect lock area.. phone is locked to specif provider work ok without sim but show locked with sim. even i also don't know which provider it is. so simply unknown provider for jaf and others tools also.. Last edited by stanner_austin; 10-03-2008 at 08:47.

10-03-2008, 14:51	#13 (permalink)
avn Freak Poster Join Date: Oct 2006 Location: uae Age: 37 Posts: 195 Member: 361731 Status: Offline Thanks Meter: 204	thanks now I am understanding LOCK STATUS: CONFIG KEY: 8000000000000002 PROVIDER KEY: 2380600000000000 Provider: Unknown provider Key Code count: 0, FBUS Code count: 0 Block 1: Lock 1: CLOSED -> Lock Data: 23806F how can I understand which provider .for purchasing unlock code thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NOKIA N92 Provider: Unknown provider AFTER WRITE PM	mafioso3	Nokia Base Band 5 ( BB-5 )	4	08-24-2007 16:28
how i can make RPL or solve Unknown provider on BB5 with UB?	SE-THAILAND	Universalbox	4	07-15-2007 20:23

09-29-2008, 17:42	#4 (permalink)
avn Freak Poster Join Date: Oct 2006 Location: uae Age: 37 Posts: 195 Member: 361731 Status: Offline Thanks Meter: 204	please help me iam waiting for your replay thanks

10-02-2008, 10:37	#7 (permalink)
chrislhen Insane Poster Join Date: Jul 2006 Posts: 57 Member: 317569 Status: Offline Thanks Meter: 3	in JAF tick the FILE SYSTEM FORMAT and click SERVICE..after that rewrite the RPL..your problem will be solve..